How to add more special characters

hello, is there any possibility to add more special
characters ? I know how to use characters from windows, i read that
tutorial, but if i want to add into special characters toolbar from
fireworks is there any chance ?
Because i have a problem with adobe acrobat. If i add a
special characters from windows i get this error "?", but if i
choose to add a character from adobe fireworks, it works fine.

Hi Anubhav,
Please refer in this code:
DATA : INT_VAR TYPE /BI0/OIPOSTXT.
DATA : length TYPE i.
DATA : num type i.
MOVE SOURCE_FIELDS-SGTXT TO INT_VAR.
TRANSLATE int_var TO UPPER CASE .
num = 0.
length = STRLEN( int_var ).
DO length TIMES.
   IF int_var+num(1) CN
   ',<>?/\:;"''ABCDEFGHI JKLMNOPQRSTUVWXYZ!%^&*()__+=1234567890'.
    int_var+num(1) = ''.
   ENDIF.
   num = num + 1.
ENDDO.
condense int_var NO-GAPS.
RESULT = int_var.
Revise that code based on your scenario..Just post here for any queries..
For other solutions, please refer in this thread:
handle invalid char at end of text
Regards,
Loed

Similar Messages

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to add more drop zones or movies in an idvd menu

I was building a dvd in idvd and ran out of drop zones to fill but I couldn't figure out how to add more drop zones.
I tried different templates but I could find none that had more than 12 drop zones.
Then I was adding movies to the main menu and idvd refused to allow more movies added when I reached 10 movies. It said that the template did not accept more movies.
I tried a few other templates and could not get it to accept more.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
Is there some way to add more than the default drop zones in an idvd template and to add more movies in a menu without having to use submenus?
Thanks for any advice.

I couldn't figure out how to add more drop zones
Sorry, the templates 'are what they are'.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
You need to figure out how to work with what is available.
If you want more freedom, buy Apple's Final Cut Studio and learn to use DVD Studio Pro.

How can I display special characters of NonEuropean languages (French, Italian, Spanish, German and Portuguese.) using import string mechanism

I would like to translate the User Interface of my application to French, Italian, Spanish, German and Portuguese.
When I put special characters in the import string file they showed up as ? (question mark)
The import strings file includes the following parameters for each string: font, text, size and style. (but no field for script)
In order to use a unicode font such as Arial I need to select a french script. But this option is not supported bu LabView (As far as I saw)
A) Is there a font which is directly German/ French etc and not regula font + script parameter?
B) Are there another required step
s for special characters support? (When I put speciual characters in the import string file the showed up as ? question mark)

This was discussed last week in this group- read the previous messages.
Look for the thread "Foreign Languages in Labview"
And recite the mantra
ActiveX is good
ActiveX is holy
All Hail Bill
Those who claim otherwise are heretics and not to be trusted
Actually, in this case the non-ActiveX suggestions may be good.
talia wrote in message
news:[email protected]..
> How can I display special characters of NonEuropean languages (French,
> Italian, Spanish, German and Portuguese.) using import string
> mechanism

How can I distinguish special characters or signs in Doc through VBA?

How can I distinguish special characters or signs in Doc through VBA?
I have a few large documents written in word 2003 format and now I work on them under word 2007.
Such large documents containing lots of special characters. I want to change them into Microsoft 3.0 equation form（It is required by the team). I find no way but using function AddOLEObject and Sendkeys through VBA. Common characters can be added
to equation by function Sendkeys, but the return value of Asc() or AscW() for "double arrow", "in" , " not greater than " such special characters or signs, to name but a few are the same ,i.e., 40 And I cannot distinguish them.
I found the link http://msdn.itags.org/word/44333/ may be of use to me, and the title is:
How to read symbols from a DOC documents! (Microsoft Word)
the original question is
Using function "InsertSymbol", I can insert a symbol into a document. But
how can I read a symbol from a document?
Using "Characters(i).range.text", I can read a char. But when meeting a
symbol, the value of "Characters(i).range.text" is always '('.How can I get the CharacterNumber of the symbol.
And the final answer is :
Hi chenfeng,
Word protects symbols from symbol fonts if you insert them from the "Insert
> Symbol" dialog.
This is done so they aren't changed when you change the font or style. But
it also results in Word reporting AscW( ) = 40 on all of them.
I've posted a macro to "unprotect" them (or to protect them again if you
want) ... just today again in
Newsgroups: microsoft.public.word.vba.customization
Subject: Symbol Characters
Date: Mon, 3 May 2004 11:00:46 -0700
Message-ID: <09f401c43138$8f92f900$[email protected]>
It isn't archived on Google yet, but tomorrow you should be able to simply
copy the message ID into http://www.google.com/advanced_group_search.
Regards,
Klaus
But the link for the macro in the final answer is missing.
Can anyone with kindness help me? Thaks a lot.

Following Cindy Meister's Advice ,I use MathType SDK.
The sample in MathType SDK in the following may be meaningful,but I do not know how the MTEF for cos^^2Theta, MTEF for sin^^2Theta and MTEF for 1 are generated .
It looks much complicated,and I searched the docs in MathType SDK to get a explanation.Is there any function to generate them? I want to use this method to change commaon text mathematical signs( in special character table) and Greek letters and characters
with subscripts and superscripts to Microsoft 3.0 equation form.
Can anyone with kindness help me?
Sub MTEFTextSubstitution()
    Dim MTEFStr1$, MTEFStr2$, MTEFStr3$
    Dim stat
    'MTEF for cos^^2Theta
    MTEFStr1$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4yaiaac+" + _
        " % gacaGGZbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B65!"
    'MTEF for sin^^2Theta
    MTEFStr2$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4CaiaacM" + _
        " % gacaGGUbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B6A!"
    'MTEF for 1
    MTEFStr3$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaaGymaaaa!36A4!"
    Selection.Copy
    'Init API, reset transform
'    If MTUtil.CheckMTDLLVersion = 0 Then Exit Sub
    If Not IsDLLVersionOK() Then Exit Sub
    MTXFormReset
    'first substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v1>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr1$, Len(MTEFStr1$), 0)
    If stat <> 0 Then
        MsgBox "1st MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'second substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v2>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr2$, Len(MTEFStr2$), 0)
    If stat <> 0 Then
        MsgBox "2nd MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'third substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v3>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr3$, Len(MTEFStr3$), 0)
    If stat <> 0 Then
        MsgBox "3rd MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'do the substitution
    stat = TransformGraphicEquation
    If stat <> 0 Then
        MsgBox "TransformGraphicEquation returned: " + Str(stat)
        Exit Sub
    End If
    MTTermAPI
    'Paste new equation
    Selection.Collapse Direction:=wdCollapseEnd
    Selection.PasteSpecial Placement:=wdInLine
End Sub

How to add more than one tabular region in a page?...

How to add more than one tabular region in a page?
i have a page, that page contain form and tabular region. when i trying to add another tabular region it showing error
1 error has occurred
Updatable SQL Query already exists on page 2. You can only add one updatable SQL query per page. Select a different page.
but i have to add the tabular in that page.
Is it possible?
pls help...
Thanks and regards,
skud

hi,
even i am searching for some thing similar.
i want to have 3 calendars in one page.
getting same message calendar already exists on page 2. You can only add one calander per page. Select a different page.
pls help.

How to check multiple special characters in instr function sql query.

Hi,
The following special characters are comma(,), slash(/), colan(:)
these special characters i need to be check in instr function.
select SUBSTR(master_title,1,INSTR(master_title,',',1,1)-1) from dual;
Can you please write the query with right answer.
Thanks in advance,
Lakshman.

Why multiple post?
How to check multiple special characters in this query.

How to remove the Special characters like @,#,$ ,..from field

How to remove the Special characters like @,#,$<,..from text field. we nedd to remove any specila char from text field .
ex:text = just#fi%cation@text
the text should be justification.

hi check this ..
data:char(25) value '5#4#2#&1#&',
     char1(9) .
       replace all occurrences of '#' in char with 'and' .
       replace all occurrences of '&' in char with 'num' .
     write: char.
or use this..
data:char(25) value 'test@ing*5#4#2#&1#&',
     char1(9) .
       replace all occurrences of '#' in char with space .
       replace all occurrences of '&' in char with space .
       replace all occurrences of '@' in char with space .
       replace all occurrences of '*' in char with space .
     write: char.
regards,
venkat.

How to add more summary data in the MIP of Compensation workbench

Hi all,
In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
How to implement it?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

How to add more disk space into /   root file system

Hi All,
Linux 2.6.18-128
can anyone please let us know how to add more disk space into "/" root file system.
i have added new hard disk with space of 20GB,
[root@rac2 shm]# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/hda1             965M 767M 149M 84% /
/dev/hda7             1.9G 234M 1.6G 13% /var
/dev/hda6             2.9G   69M 2.7G   3% /tmp
/dev/hda3             7.6G 4.2G 3.0G 59% /usr
/dev/hda2              18G   12G 4.8G 71% /u01
LABLE=/               2.0G     0 2.0G   0% /dev/shm
/dev/hdb2             8.9G 149M 8.3G   2% /vm
[root@rac2 shm]#

Dude! wrote:
I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
Simple stats. Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
2 disks buy you 2 tickets in The-Drive-Failure lottery.
Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive.

CWB: how to add more summary data in the summary section

HI All,
We need to add more summary data in the summary section. Some summary data need to calculated dynamically like (summary data A /summary data B).
under the worksheet, there is a link:
Personalize Dynamic Columns
But this link allows to create Dynamic Columns for the worksheet, but not for summary setion.
Is any way to add more summary data in the summary section through personalization instead of customization (VO extension)?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

How to add more functionalities to personalization dialogue box in portal

Hi
How to add more functionalities to the personalization dialouge box in sap portal?
Just like User Profile tab, how can I add my own functionality to personalization dialouge box?
I want the functionality to appear as a tab under Detailed Navigation in Personalization dialouge box - similar to User Profile, Work Protect Mode tabs which are already there under detailed navigation in personalization.

Thanks Gyan.
Below is the code for creating list box :
OAApplicationModule am = pageContext.getRootApplicationModule();
OAViewObject listVO=(OAViewObject)am.findViewObject("LocationsLOVVO");
OAWebBeanFactory list1 = pageContext.getWebBeanFactory();
OADefaultListBean list = (OADefaultListBean)list1.createWebBean(pageContext, OAWebBeanConstants.DEFAULT_LIST_BEAN, null, "LocationsList");
list.setListViewObjectDefinitionName("oracle.apps.irc.lov.server.LocationsLOVVO");
list.setListValueAttribute("LocationCode");
list.setListDisplayAttribute("LocationCode");
list.setSize(6);
list.setMultiple(true);
list.setName("Location");
OAMessageLayoutBean listboxbean = (OAMessageLayoutBean)webBean.findChildRecursive("AplmessageLayout");
listboxbean.addIndexedChild(list);
But it is not inserting all the location values in the list.
Regards,
Gaurav.

How do you insert special characters with imovie 08?

How do you insert special characters into a project
with imovie 08?

Don't think that would work. Since my "system date" is already set at 2007. I have 2 imports, one has the year as 2048, and the other at 2016!! I don't know where they are getting these dates from, but they are not the system date.
Were the files imported directly from a camcorder or from files already on your hard drive? In the first case the year may have been taken from the time "stamp" recorded when the footage was shot (which may or may not have been correctly set by the user). On the other hand, files imported from the hard drive seem to be keyed to the date the imported file is written to the "Events" folder which, of course, reflects the current system time/date setting. That's why I said you had to then import (re-import) the files from a hard drive source -- i.e., to ensure the DTG would be re-written.

How to add more Im's in c2-00

I have a nokia c2-00 mobile phone and wants to use its chat app which is in messaging menu .
But there is only 1 im (ovi.com) is available i want to add more im's like fb yahoo etc .

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

How do I create special characters in 10.5.8

How do I create special characters in 10.5.8, like accents above letters.

Paulfhannan wrote:
like accents above letters.
The most common ones for European languages can be created with the normal US keyboard layout using alt/option dead keys. alt + e, then e gives you é. A list:
http://homepage.mac.com/thgewecke/diacritics.html

How to add more special characters

Similar Messages

Maybe you are looking for