How to add new password policy to cn=config via LDIF file

I am trying to add a new password policy called "Service Password Policy". I have the following LDIF file:
dn: cn=Sservice Password Policy,cn=config
changetype: add
objectClass: top
objectClass: passwordPolicy
cn: Service Password Policy
description: A password policy intended for proxy or service accounts.
passwordMustChange: off
passwordChange: off
passwordMinAge: 0
passwordInHistory: 0
passwordExp: off
passwordMaxAge: 2142720000
passwordWarning: 0
passwordExpireWithoutWarning: off
passwordCheckSyntax: off
passwordMinLength: 6
passwordRootdnMayBypassModsChecks: off
passwordStorageScheme: ssha
passwordLockout: off
passwordMaxFailure: 32700
passwordUnlock: on
I've tried various permutations of this command:
dsconf import -h localhost -p 1389 /root/createServicePasswordPolicy.ldif "cn=Service Password Policy,cn=config"
I get this error:
"cn=config": suffix does not exist.
The "import" operation failed on "localhost:1389".
Thx for any help,
CC

Good it did not work or you would have overwritten all the data currently in cn=config. Anyway, "dsconf import" only works on regular backends. The cn=config tree is special a.
You should use ldapmodify to add the contents to cn=config.
$ ldapmodify -p 1389 -D cn=root -f a.ldif -a

Similar Messages

How to create new password policy in FIM

Can anyone assist me is there any way to create a new password policy in fim similar to creating password policy in OIM.Any related inforamtion is useful and appreciated.

Ref to below Link it might give you some idea:
http://www.iamblogg.com/password-policy-violation-exporting-to-ad-from-fim-2010/
Regards~
Deepak Arora
If you Find the Answer | Article | Blog Helpful Please Vote As Helpful / Mark As Answer

How to add new table into running extract pump and replicat files

Hi all, i am very much confused how we should add a new table for replication into extract pump and replicat parameter files without stopping them manually? Is there any way where we can add them without disturbing functionality of OGG?
Experts help required on this
Thanks in advance

Hi,
You can stop and restart the extract process after modifying the extract prm files. the current and last reading point details available checkpoint tables ,or it can get it from info command itself , so you can start the extract process at the point of particular RBA or SEQ no, but you make sure the retention period of your archive log files, because all the transactions are moved in to archive log location, so extract process will fetch the data from archive log also,
Documentation states:
If Extract abends when a long-running transaction is open, it can seem to take a long time
to recover when it is started again. To recover its processing state, Extract must search
back through the online and archived logs (if necessary) to find the first log record for that
long-running transaction. The farther back in time that the transaction started, the longer
the recovery takes, in general, and Extract can appear to be stalled.
Why archive logs?
GG reads online redo logs in default but when they are all switched, and for some reason in the meantime GG stopped (abended) it doesn't have the last transaction as transaction was in online log that switched. That is why you need archive logs, so that GG can reach this old transaction in archive log.
E.g you have two online logs, your transaction is at the begining of the first log. Extract abends. Transactions keep coming to database first online log switches to second, second switches to first and first again to second. You start GG but transaction you finished processing on is no longer in first online log. But it is in archive log.
What to do?
1) Start Oracle in archive log mode
2) Make sure you have available space for archive logs
GG will look into Oracle default location for archive logs when it abends and transaction is no longer in online log.

How to add new text and an empty space before a file name with Automator

I can create a new service to add to multiple files some text before the file name but I need to add even an empty space; e.g. file name original becomes: new text(space)file name original. The aim is to add this text and space to multiple files.
I hope to be understood. Please can somebody help me?
Thanks

This is an old Apple-supplied AppleScript that will do the job.
IMPORTANT: note the conditions of use: it will choose the frontmost Finder window to operate on. Therefore, open the folder you want to change the names of and make it the front finder window BEFORE running the script.
Add to File Names
This script is designed to add a prefix or suffix to files in the front window of the desktop.
If no folder windows are open, the script will affect items on the desktop.
Copyright © 2001–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
--March 2014: Changes by Phil Stokes to make the script work on 10.9
--these changes are simply reversing the order of parameters in the lines that have "copy" in them
-- The following line is disabled due to a Menu Manager bug
--set the source_folder to (choose folder with prompt "Pick the folder containing the files to rename:")
try
          tell application "Finder" to set the source_folder to (folder of the front window) as alias
on error -- no open folder windows
          set the source_folder to path to desktop folder as alias
end try
set the prefix_or_suffix to ""
repeat
          display dialog "Enter the prefix or suffix to use:" default answer the prefix_or_suffix buttons {"Cancel", "Prefix", "Suffix"}
          copy the result as list to {button_pressed, prefix_or_suffix}
          if the prefix_or_suffix is not "" then exit repeat
end repeat
set the item_list to list folder source_folder without invisibles
set source_folder to source_folder as string
repeat with i from 1 to number of items in the item_list
          set this_item to item i of the item_list
          set this_item to (source_folder & this_item) as alias
          set this_info to info for this_item
          set the current_name to the name of this_info
          if folder of this_info is false and ¬
                    alias of this_info is false then
                    if the button_pressed is "Prefix" then
                              set the new_file_name to the (the prefix_or_suffix & the current_name) as string
                    else
                              set the new_file_name to the (the current_name & the prefix_or_suffix) as string
                    end if
                    my set_item_name(this_item, the new_file_name)
          end if
end repeat
beep 2
on set_item_name(this_item, new_item_name)
          tell application "Finder"
--activate
                    set the parent_container_path to (the container of this_item) as text
                    if not (exists item (the parent_container_path & new_item_name)) then
                              try
                                        set the name of this_item to new_item_name
                              on error the error_message number the error_number
                                        if the error_number is -59 then
                                                  set the error_message to "This name contains improper characters, such as a colon (:)."
                                        else --the suggested name is too long
                                                  set the error_message to error_message -- "The name is more than 31 characters long."
                                        end if
--beep
                                        tell me to display dialog the error_message default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                                        copy the result as list to {button_pressed, new_item_name}
                                        if the button_pressed is "Skip" then return 0
                                        my set_item_name(this_item, new_item_name)
                              end try
                    else --the name already exists
--beep
                              tell me to display dialog "This name is already taken, please rename." default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                              copy the result as list to {button_pressed, new_item_name}
                              if the button_pressed is "Skip" then return 0
                              my set_item_name(this_item, new_item_name)
                    end if
          end tell
end set_item_name

Adding new password policy rules

Can you add new password policy rules in OID 902?
I wish to prevent users from entering a new password that matches their previous 5 passwords.
Can this be done at all?
Regards,
John

We recently put in a password policy that makes everyone change it every 90 days. This last week was the first time everyone's had to update their password, and we ran into a few issues.We've got over 150 users so I don't know if it's user error or what, but I've had half a dozen people over the last couple days say that they changed their password, and now they can't log into the computer. I end up resetting it for them, and then they're good to go again. I feel like maybe they aren't remembering what they set their password to.Also, another half dozen people so far have complained that their phones aren't syncing mail after changing their password. They said they put the new password into their phone, so it should just keep going... but nothing. Some are fixed by removing the profile and re-adding, others I have to go and delete...
This topic first appeared in the Spiceworks Community

How to add a new password policy

This must be simple, but appearantly nobady has conceeded:
"how does one add a NEW password policy to the OID?"
I need this functionality, because I want to enforce the following rules in my SSO application:
- 99% of the users may have passwords that never expire
- 1% (say 5 or 6) users must have passwords that do expire, because they are super users and we want to minimize the risk of their passwords getting in the wrong hands.
I feel almost embarrased to post this question, but I really cannot find any example or documentation that shows me how to add a new password policy.
Is their any way to do this in OID?

Hi,
Can you please provide exact steps those were used to create password policies for users.
I opened a Tar with metalink on this , and they told me that this way is not supported by Oracle.
So if you can please help me with this it will be great. See the details about the Tar as below:
11-AUG-05 21:41:42 GMT
QUESTION
=========
How to create or add a password policy for users in OID according to forum 833683 ?
RESEARCH
=========
- Re: How to add a new password policy
- Oracle Internet Directory Administrators Guide Release 9.2 Chapter 17 "Password Policies"
ANSWER
=======
Oracle Technical Support does not support to create password policies for specific users. Orac
le Internet Directory provides a Password Policy for each subscriber created (al
so known as Realm) or for the entire DIT.
eos (end of section)
I talked with the customer and she agreed to close this TAR.
Best Regards,
Hector Viveros
Oracle Identity Management
@HCL
.

What is the new password policy?

What is your new password policy? All you state on the page where it forces us to change without being able to continue is a meter that says whether its strong enough. How about actually stating what the requirements are on that page? Even when clicking on the Password Help link, it doesn’t state what the requirements are. This can be very frustrating to users trying to create a password model.
After toying around with some passwords, I am guessing it is just like 12 characters regardless of whether they are upper/lower case, numbers, or special characters. This policy is really lacking for any type of real security measure.

Hello tmanXX,
Internet security is a topic of much importance and discussion these days. In order to ensure that you and our other customers have the most enjoyable and secure experience, we recently established new requirements for passwords on BestBuy.com. Even so, you ask very good questions about the standards that we have established.
When changing your password on our website, we have a visual indicator to verify your password strength against our criteria. We recommend a variety of letters (upper and lower case), numerals, and symbols deployed randomly for best results. Our standards are not published to add a further obstacle to those who might try to use such information with ill intent. I apologize for any aggravation that you may have endured as a result.
Please know that I'm grateful for your feedback on our password standards and that you took the time to pose your questions and concerns.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

How to add new group entry in Cisco Vpn using powershell

I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"

Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified

How to add WS Security Policy in OSB

Hi all,
How to add WS Security Policy in OSB tht has username and Password??
Thanks,
Kiran

http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/security/ws_policy.html

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to add new line in message on my S890

My stock keyboard in Lenovo S890 doesn't have enter key, is this normal ? How to add new line ?
However this happened only in messages, while using whatsapp the enter key present.

Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new text field in standard report

how to add new text field in standard report?

Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

How to add new password policy to cn=config via LDIF file

Similar Messages

Maybe you are looking for