How to add new tables in Streams for Schema level replication ( 10.2.0.3 )
Hi,
I am in process of setting up Oracle Streams schema level replication on version 10.2.0.3. I am able to setup replication for one table properly. Now I want to add 10 more new tables for schema level replication. Few questions regarding this
1. If I create new tables in source, shall I have to create tables in target database manually or I have to do export STREAMS_INSTANTIATION=Y
2. Can you tell me metalink note id to read more on this topic ?
thanks & regards
parag
The same capture and apply process can be used to replicate other tables. Following steps should suffice your need:
Say table NEW is the new table to be added with owner SANTU
downstr_cap is the capture process which is already running
downstr_apply is the apply process which is already there
1. Now stop the apply process
2. Stop the capture process
3. Add the new table in the capture process using +ve rule
BEGIN
DBMS_STREAMS_ADM.ADD_TABLE_RULES
table_name => 'SANTU.NEW',
streams_type => 'capture',
streams_name => 'downstr_cap',
queue_name => 'strmadmin.DOWNSTREAM_Q',
include_dml => true,
include_ddl => true,
source_database => ' Name of the source database ',
inclusion_rule => true
END;
4. Take export of the new table with "OBJECT_CONSISTENT=Y" option
5. Import the table at destination with "STREAMS_INSTANTIATION=Y' option
6. Start the apply process
7. Start the capture process
Similar Messages
-
How to add new tab after reason for rejection tab using tcode va01
Hello,
how to add new tab after reason for rejection tab using tcode va01.Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM -
How to add new table into running extract pump and replicat files
Hi all, i am very much confused how we should add a new table for replication into extract pump and replicat parameter files without stopping them manually? Is there any way where we can add them without disturbing functionality of OGG?
Experts help required on this
Thanks in advanceHi,
You can stop and restart the extract process after modifying the extract prm files. the current and last reading point details available checkpoint tables ,or it can get it from info command itself , so you can start the extract process at the point of particular RBA or SEQ no, but you make sure the retention period of your archive log files, because all the transactions are moved in to archive log location, so extract process will fetch the data from archive log also,
Documentation states:
If Extract abends when a long-running transaction is open, it can seem to take a long time
to recover when it is started again. To recover its processing state, Extract must search
back through the online and archived logs (if necessary) to find the first log record for that
long-running transaction. The farther back in time that the transaction started, the longer
the recovery takes, in general, and Extract can appear to be stalled.
Why archive logs?
GG reads online redo logs in default but when they are all switched, and for some reason in the meantime GG stopped (abended) it doesn't have the last transaction as transaction was in online log that switched. That is why you need archive logs, so that GG can reach this old transaction in archive log.
E.g you have two online logs, your transaction is at the begining of the first log. Extract abends. Transactions keep coming to database first online log switches to second, second switches to first and first again to second. You start GG but transaction you finished processing on is no longer in first online log. But it is in archive log.
What to do?
1) Start Oracle in archive log mode
2) Make sure you have available space for archive logs
GG will look into Oracle default location for archive logs when it abends and transaction is no longer in online log. -
How to add new room in LCCS for live streaming video using flex builder
Hi,
I have created a video conferencing functionality using LCCS. Now i want to create a room programatically.
So that user can create his own room and invite his/her friends.I am looking for solution on this.
Any guidance on thisQuick suggestion : the documentation has a whole section on this =) :
http://learn.adobe.com/wiki/display/lccs/06DeployingApplications
nigel -
Hi how to add new folders under root for jsp in tomcat4.1.18
hi,
previsously i used tomcat3.3 and tomcat4.1.12 run sucessfully.
now i downloed jakartha_tomcat4.1.18,
i am running sample succesfuly direcly under root.
now i want my some jsp appilcationes to run under xyz,pqr folders
here my jsp files are abc.jsp,fgh.jsp while running file url like this
http://localhost:8080/xyz/abc.jsp
http://localhost:8080/pqr/fgh.jsp
while running url server not locate the files.
where i add these xyz and pqr folders in server.xml.
here my server.xml like this any one can modify this
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<!-- Comment these entries out to disable JMX MBeans support -->
<!-- You may also configure custom components (e.g. Valves/Realms) by
including your own mbean-descriptor file(s), and setting the
"descriptors" attribute to point to a ';' seperated list of paths
(in the ClassLoader sense) of files to add to the default list.
e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
-->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Tomcat-Standalone">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 4.0 documentation bundle for more detailed
instructions):
* Download and install JSSE 1.0.2 or later, and put the JAR files
into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to -1 -->
<!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
<!--
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8443" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="100" debug="0" scheme="https" secure="true"
useURIValidationHack="false" disableUploadTimeout="true">
<Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
clientAuth="false" protocol="TLS" />
</Connector>
-->
<!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<!-- Define an AJP 1.3 Connector on port 8009 -->
<!--
<Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
port="8009" minProcessors="5" maxProcessors="75"
acceptCount="10" debug="0"/>
-->
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8082" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="100" debug="0" connectionTimeout="20000"
proxyPort="80" useURIValidationHack="false"
disableUploadTimeout="true" />
-->
<!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
<!--
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8083" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" />
-->
<!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
<!--
<Connector className="org.apache.catalina.connector.http10.HttpConnector"
port="8084" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
<Engine name="Standalone" defaultHost="localhost" debug="0" jmvRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Standalone" defaultHost="localhost" debug="0">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.3
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host -->
<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn"
debug="0"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Logger shared by all Contexts related to this virtual host. By
default (when using FileLogger), log files are created in the "logs"
directory relative to $CATALINA_HOME. If you wish, you can specify
a different directory with the "directory" attribute. Specify either a
relative (to $CATALINA_HOME) or absolute path to the desired
directory.-->
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<!-- Define properties for each web application. This is only needed
if you want to set non-default properties, or have web application
document roots in places other than the virtual host's appBase
directory. -->
<!-- Tomcat Root Context -->
<Context path="" docBase="ROOT" debug="0"/>
<!-- Tomcat Examples Context -->
<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>
<!-- If you wanted the examples app to be able to edit the
user database, you would uncomment the following entry.
Of course, you would want to enable security on the
application as well, so this is not done by default!
The database object could be accessed like this:
Context initCtx = new InitialContext();
Context envCtx = (Context) initCtx.lookup("java:comp/env");
UserDatabase database =
(UserDatabase) envCtx.lookup("userDatabase");
-->
<!--
<ResourceLink name="userDatabase" global="UserDatabase"
type="org.apache.catalina.UserDatabase"/>
-->
<!-- PersistentManager: Uncomment the section below to test Persistent
Sessions.
saveOnRestart: If true, all active sessions will be saved
to the Store when Catalina is shutdown, regardless of
other settings. All Sessions found in the Store will be
loaded on startup. Sessions past their expiration are
ignored in both cases.
maxActiveSessions: If 0 or greater, having too many active
sessions will result in some being swapped out. minIdleSwap
limits this. -1 or 0 means unlimited sessions are allowed.
If it is not possible to swap sessions new sessions will
be rejected.
This avoids thrashing when the site is highly active.
minIdleSwap: Sessions must be idle for at least this long
(in seconds) before they will be swapped out due to
activity.
0 means sessions will almost always be swapped out after
use - this will be noticeably slow for your users.
maxIdleSwap: Sessions will be swapped out if idle for this
long (in seconds). If minIdleSwap is higher, then it will
override this. This isn't exact: it is checked periodically.
-1 means sessions won't be swapped out for this reason,
although they may be swapped out for maxActiveSessions.
If set to >= 0, guarantees that all sessions found in the
Store will be loaded on startup.
maxIdleBackup: Sessions will be backed up (saved to the Store,
but left in active memory) if idle for this long (in seconds),
and all sessions found in the Store will be loaded on startup.
If set to -1 sessions will not be backed up, 0 means they
should be backed up shortly after being used.
To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
and minIdleBackup all to -1, saveOnRestart to false, then restart
Catalina.
-->
<!--
<Manager className="org.apache.catalina.session.PersistentManager"
debug="0"
saveOnRestart="true"
maxActiveSessions="-1"
minIdleSwap="-1"
maxIdleSwap="-1"
maxIdleBackup="-1">
<Store className="org.apache.catalina.session.FileStore"/>
</Manager>
-->
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/EmployeeAppDb">
<parameter><name>username</name><value>sa</value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name>
<value>org.hsql.jdbcDriver</value></parameter>
<parameter><name>url</name>
<value>jdbc:HypersonicSQL:database</value></parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Context>
</Host>
</Engine>
</Service>
<!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with Tomcat 4.0
as its servlet container. Please read the README.txt file coming with
the WebApp Module distribution on how to build it.
(Or check out the "jakarta-tomcat-connectors/webapp" CVS repository)
To configure the Apache side, you must ensure that you have the
"ServerName" and "Port" directives defined in "httpd.conf". Then,
lines like these to the bottom of your "httpd.conf" file:
LoadModule webapp_module libexec/mod_webapp.so
WebAppConnection warpConnection warp localhost:8008
WebAppDeploy examples warpConnection /examples/
The next time you restart Apache (after restarting Tomcat, if needed)
the connection will be established, and all applications you make
visible via "WebAppDeploy" directives can be accessed through Apache.
-->
<!-- Define an Apache-Connector Service -->
<!--
<Service name="Tomcat-Apache">
<Connector className="org.apache.catalina.connector.warp.WarpConnector"
port="8008" minProcessors="5" maxProcessors="75"
enableLookups="true" appBase="webapps"
acceptCount="10" debug="0"/>
<Engine className="org.apache.catalina.connector.warp.WarpEngine"
name="Apache" debug="0">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="apache_log." suffix=".txt"
timestamp="true"/>
<Realm className="org.apache.catalina.realm.MemoryRealm" />
</Engine>
</Service>
-->
</Server>
==========
any one may modify above one
thanks
pullareddyjAs the server.xml is big enough, I took the minimum portion of it. Hope u can proceed with it.
<!-- Tomcat Root Context -->
<Context path="" docBase="ROOT" debug="0"/>
<!-- New contexts -->
<Context path="/xyz" docBase="pathTo_xyz" debug="0" crossContext="true"/>
<Context path="/pqr" docBase="pathTo_pqr" debug="0" crossContext="true"/>
<!-- Tomcat Examples Context -->
<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
You should also provide a WEB-INF folder under pqr or xyz folder.
You should also provide a web.xml file under each WEB-INF folder.
The minimal web.xml is
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/j2ee/dtd/web-app_2_3.dtd">
<web-app>
</web-app>
That's it. Try it out. Hope it is OK.
Hafizur Rahman
SCJP -
How add new table in derby travel database
sir i use Sun Java Studio Creator with derby
sir i want create new table in derby travel database but when i right click
on table not that disable and not give and table create button
please give me idea how i add new table in derby travel database
thank's aamirWithin JDeveloper the generation of entities (Persistent POJOs) from tables will overwrite exiting classes. If you have additional tables you wish to map without losing existing work you will need to create the new classes and map them manually. If you are using the native TopLink mappings there is auto-map support on individual descriptors in the structure pane to automate much of this. If you are using JPA mappings it is a bit more manual at present but the tooling is ntended to give you feedback on problems as you construct and configure your mappings.
Doug -
How add new tab after reason for rejection tab using tcode va01
Hello,
How to add new tab after Reason for Rejection tab using tranzaction code VA01.
pls suggest solution.I don't think you can add a tab after reason for rejection tab. There are custom tab, which you can use for your convenient, given by SAP. You can look into the below details:
Program : SAPMV45A
Screen: 8459(Item) and 8309(Header).
Kuntal. -
Hi All how to add new payscale for an employee in sap hr-abap,its urgent
Hi All ,
how to add new payscale for an employee in sap hr-abap,its urgent.
Message was edited by:
bharat kumar
Message was edited by:
bharat kumarHi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji -
How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K
HI Experts,
how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
Requirement:
Already the contract having two line items using ME31K.
Custom program has to add new line items in existing contract.
Thanks,
SendilI got the solution:
We can do like this:
1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
2. After getting results, append new line item. Then use your BAPI.
Check this posting program.. where this bapi is used, use the same coding technique.
IDOC_INPUT_PURCONTRACT_CHANGE -
How to add new field into dynamic internal table
Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
here i want to add one more field into <TAB> at LAST position and my
Field name = field_stype and
Field type = 'LVC_T_STYL'
could you please helpme out .Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
<fs_dyntable>, u201C Field symbol to create work area
<fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
index = sy-index.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
Set up fieldvalue
CONCATENATE 'VALUE' index INTO
fieldvalue.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
CLEAR wa_cat.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
wa_cat-fieldname = wa_flname.
wa_cat-seltext_s = wa_flname.
wa_cat-outputlen = '10'.
APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = fs_fldcat
TABLES
t_outtab = <t_dyntable>. -
GGB0 for PS (project system) , how to add another table
hi all,
how to set in ggb0 , under Project System-Network activity, we need to add table resbd to check field saknr , how to add the table resbd?1) Using bcdedit.exe /enum
To enable the computer to also boot Windows 7 you again use bcdedit.exe with the following command which will copy the current Windows
Boot Loader details for Windows Server 2008 to Windows 7.
bcdedit.exe /copy
{current} /d "Microsoft Windows 7"
bcdedit.exe will
respond with something like the following.
The
entry was successfully copied to {................................}.
Using
bcdedit.exe /enum to again enumerate through the current entries within the BCD store you'll see the newly added entry.
Before you can use the newly created Windows boot loader configuration, you'll need to change the partition for Windows 7 using
the following two bcdedit.exe commands.
bcdedit.exe /set {.................................} device partition=D:
bcdedit.exe /set {.................................} osdevice partition=D:
If you now reboot the system you should now be able to boot into either Windows Server 2008 or Windows 7. -
How to add new fields to picklist of search criteria for opportunities
Hi Friends,
Could you please tell me how to add new fields to the picklist of search criteria of Opportunities in WEBCLIENT(CRM 2007).
Regards,
VijayDear Vijay,
We are facing the same problem over here.
Have you managed to find a solution? Please share
BR,
Rohit -
PLz Help me its urgent, how to add new field in mm01 basic data screen
Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee. -
CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0
Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque EscalerHi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek -
How to add new fields to the system form (Ex.expenses to a/r invoice form)
hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQIf I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.
Maybe you are looking for
-
AppleTV and iChat: can they work together?
Right now when I use iChat, I hook my the video out of my laptop up to my HDTV and the audio to my stereo. So far it's worked great. I was hoping that AppleTV would let me do that a bit more easily. Does anyone know if that will be possible with Appl
-
Streamlining win XP pro for music question
Hello guys and gals I will soon be buying the EMU 1212M card and I have a spare 160Gb drive which I will partition so my question is as per topic but I would need some links to places that shows you how to streamline or disable the crap in windows th
-
Heat and Fan on Retina MacBook Pro
Hi Guys, This is my first post in the forums and I just wanted some advice on an issue. I know there are existing discussions - but I've read conflicting answers in each. I'd like to know if the fan and heat I'm experience on my brand new 15 inch mid
-
I bought the latest WD TV HD Player and there is no Netflix App available. It would be great if the next Firmware would include Netflix. The product number is P/N WDBPUF0000NBK-00
-
My MacBook used to play DVDs. I've tried several that used to work on this computer, but none work now. How can I get my MacBook to play DVDs?