How to add Oracle Enterprise Scheduler Extensions to JDeveloper 11.1.1.4?

Hi,
Please provide the necessary steps to add Oracle Enterprise Scheduler Extensions to JDeveloper 11.1.1.4. I have searched a lot, but the links point to Jdeveloper version 11.1.1.5.

This extension is not available for the 11gR2 releases.
If you are trying to add extensions for the Fusion Applications customization environment, you must use the JDeveloper version that came from the Fusion Application DVDs. The FA extensions are also on those DVDs
Fusion Applications does not work with the same versions of JDeveloper that you download from the OTN website.
--jb

Similar Messages

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance

Hi All,
Please let us know How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance.
Reagrds,
Vikas

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

RE: Oracle Enterprise Manager Extensibility 10g Release 4 (10.2.0.4) Guide

Hi:
- I have a question about the SNMP Receivelet code in this guide:
Oracle® Enterprise Manager Extensibility
10g Release 4 (10.2.0.4)
Part Number B40007-01
- Basically I copied the SNMP Receivelet code from the guide into a plug-in.
I was able to load the plug-in without any error messages, but no alerts are raised
when I send a trap.
- Could someone please tell me what port the snmp receivelet listens on?
- I tried ports: 3002, 1830, 3872 and 8002.
- Port 3002 was obtained from emd.properties
- Port 1830 was obtained from the OEM console
- What condition is necessary for agent to receive SNMP traps?
- My agent environment is:
[oracle@blade bin]$ ./emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.1.0
Protocol Version : 10.2.0.0.0
Agent is Running and Ready
[oracle@blade bin]$
- My metadata file is:
<?xml version="1.0"?>
<!DOCTYPE TargetMetadata SYSTEM "../dtds/TargetMetadata.dtd">
<TargetMetadata META_VER="1.001" TYPE="oracle_guide" >
<Display>
<Label NLSID="oracle_guide">Oracle CCA Application</Label>
</Display>
<Metric NAME="Response" TYPE="TABLE">
<Display>
<Label NLSID="oracle_guide_resp">Response</Label>
</Display>
<TableDescriptor>
<ColumnDescriptor NAME="Status" TYPE="NUMBER">
<Display>
<Label NLSID="guide_SNMP_resp_status">CCA SNMP SubAgent
Status</Label>
</Display>
</ColumnDescriptor>
</TableDescriptor>
<QueryDescriptor FETCHLET_ID="OSLineToken">

<Property NAME="perlBin" SCOPE="SYSTEMGLOBAL">perlBin</Property>
<Property NAME="scriptsDir" SCOPE="SYSTEMGLOBAL">scriptsDir</Property>
<Property NAME="command" SCOPE="GLOBAL">
%perlBin%/perl %scriptsDir%/osresp.pl
</Property>
<Property NAME="ENVEM_TARGET_NAME" SCOPE="INSTANCE">AgentAddr</Property>
<Property NAME="startsWith" SCOPE="GLOBAL">em_result=</Property>
<Property NAME="delimiter" SCOPE="GLOBAL">|</Property>
</QueryDescriptor>
</Metric>
<Metric NAME="interfaces" TYPE="TABLE">
<TableDescriptor>
<ColumnDescriptor NAME="name" TYPE="STRING" IS_KEY="TRUE"/>
<ColumnDescriptor NAME="type" TYPE="NUMBER" IS_KEY="FALSE"/>
<ColumnDescriptor NAME="status" TYPE="NUMBER" IS_KEY="FALSE"/>
<ColumnDescriptor NAME="configured_status" TYPE="NUMBER" IS_KEY="FALSE"/>
</TableDescriptor>
<PushDescriptor RECVLET_ID="SNMPTrap">
<Property NAME="MatchEnterprise" SCOPE="GLOBAL">1.3.6.1.4.1.529</Property>
<Property NAME="MatchGenericTrap" SCOPE="GLOBAL">6</Property>
<Property NAME="MatchSpecificTrap" SCOPE="GLOBAL">50</Property>
<Property NAME="MatchAgentAddr" SCOPE="INSTANCE">AgentAddr</Property>
<Property NAME="SeverityStatusOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.8</Property>
<Property NAME="KeyNameOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.31</Property>
<Property NAME="ContextTypeOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.3</Property>
<Property NAME="ContextConfigured_statusOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.7</Property>
<Property NAME="SeverityCode" SCOPE="GLOBAL">CRITICAL</Property>
</PushDescriptor>
</Metric>
<InstanceProperties>
<InstanceProperty NAME="AgentHost" CREDENTIAL="FALSE"
OPTIONAL="FALSE">
<Display>
<Label NLSID="oracle_guide_SNMP_agent_host">Hostname (SNMP Agent )
</Label>
</Display>
</InstanceProperty>
<InstanceProperty NAME="AgentAddr" CREDENTIAL="FALSE"
OPTIONAL="FALSE">
<Display>
<Label NLSID="oracle_guide_SNMP_agent_addr">IP Address (SNMP Agent)
</Label>
</Display>
</InstanceProperty>
<InstanceProperty NAME="CommunityString" CREDENTIAL="TRUE"
OPTIONAL="TRUE">
<Display>
<Label NLSID="oracle_guide_SNMP_community_string">SNMP Read
Community String (Default: public)</Label>
</Display>
public
</InstanceProperty>
<InstanceProperty NAME="Timeout" CREDENTIAL="FALSE"
OPTIONAL="TRUE">
<Display>
<Label NLSID="oracle_guide_SNMP_timeout">SNMP Timeout (Default: 30
seconds)</Label>
</Display>
30
</InstanceProperty>
</InstanceProperties>
</TargetMetadata>
bash-3.00#
- My collection file is:
<!DOCTYPE TargetCollection SYSTEM "../dtds/TargetCollection.dtd">
<TargetCollection TYPE="oracle_guide">
<CollectionItem NAME = "Response">
<Schedule>
<IntervalSchedule INTERVAL = "5" TIME_UNIT = "Min"/>
</Schedule>
<Condition COLUMN_NAME="Status"
CRITICAL="0"
WARNING="NotDefined"
OPERATOR="EQ"
OCCURRENCES="1"
MESSAGE="%target% is unreachable or is down."
MESSAGE_NLSID="oracle_guide_response_status"
CLEAR_MESSAGE="%target% is up."
CLEAR_MESSAGE_NLSID="oracle_guide_response_status_clear"/>
</CollectionItem>
</TargetCollection>
bash-3.00#
Thanks
John
Edited by: user8826739 on Feb 23, 2010 7:12 AM

Looks like this was also posted 4 messages above ... follow the anwers there.
Please only post the question once ... reposted will not get any answers you wouldn't have gotten anyway.
That just makes it hard for other users to follow all the information.
Dave

How to add a new schedule line?

Hi folks,
Please help to tell me is there any user exit can be used for adding a new schedule line? I want to keep the old first date data, add new shedule line with new updated schedule line date. Pls. help to advise how to do it in VA01/VA02 ?
If i simply use the following update statement in MV45AFZZ, then the first date will be updated by the new Schedule line date, which is not what i want. (Since new order always the First line "0001" will get updated)
xvbep-edatu = t_temp-edatu .
       modify xvbep TRANSPORTING edatu "UPDKZ
                     where posnr = t_temp-posnr
                       and ETENR = '0002'.
        if SY-SUBRC <> 0.
           modify xvbep TRANSPORTING edatu "UPDKZ
                        where posnr = t_temp-posnr.
        endif.
Tks,
Jenny
Message was edited by:
        Jenny Zhuang

Hi Ferry,
Many thanks for the reply. But i still have the question, seems the user exit 'USEREXIT_CHECK_VBEP' in 'MV45AFZB' is used for addtional checks on the schedule line, my questions is how to add a new schedule line? It maybe very difficult. so is it possible to change the configurable Sales order's Finish Date for it's production order, and force it to generate a new schedule line?
Tks,
Jenny

How to start Oracle Enterprise Manager(Oracle 9i) on Sun Solaris 9 platform

Hi
How to start Oracle Enterprise Manager(Oracle 9i) on Sun Solaris 9 platform and Oracle Enterprise Manager(Oracle 10G) on Sun Solaris 10 platform?
Thanks.
RJ.

I need to use it to unlock some accounts.There is a SQL command to do that
SQL> alter user <username> account unlock;
Anyway...
$ export ORACLE_SID=chucky
$ emctl start dbconsole

Using Oracle Enterprise Scheduling Service (ESS)

Hi,
I am trying to install Oracle Enterprise Scheduling Service (ESS) on windows 2008 server where WebLogic server is already installed. As per Install guide we have to install Network Integrity software before proceeding to ESS installation. But Network Integrity System Requirements says Network Integrity software is supported only by a select few Linux OS.
Is this true ? Does that mean ESS cannot be installed on Windows OS ?
If anybody has installed ESS on Windows OS, please help.
Thanks
Swarup

Hi,
Please check your setupinfo.txt file under the Forms home /install directory to find the exact EM URL to access.
Please note that this forum is for EM High Availability configurations. You may want to use the Fusion Middleware forums instead for these questions.
I hope this helps.
Thank you,
Farouk

Oracle Enterprise Scheduler

Hello, I've just started developing in ADF(Jdeveloper Release 11.1.2.3.0) a couple of months ago, after 10 years of PeopleSoft development.
Now I'm trying to implement a solution for batch processing, in Peoplesoft it was Process Scheduler. I found a lot of documentation on Oracle Enterprise Scheduler, but I can't for the life of me find a way to download it install it. Is it bundled with other products? Do I have it already and not know it? If someone could point me in the right direction so I can get it installed it would be much appreciated.
Thanks,
Adam

I guess the Enterprise Scheduler Service is part of Fusion Applications and can't be used outside fusion applications.
you might take a look at WebLogic server Timer Service or the job scheduler the DB offers.
Timo

How to add a New schedule line and update the order quantity?

Hi all,
I have to add a new schedule line in VA01/VA02 so that when ther is partial confirmed quantity against a schedule line, we have to create a new schdule line based on the existing so that it will contain confirmed in one and unconfirmed in the other.
The schedule line will split once the user go to Header data screen in VA01/VA02. So I used USEREXIT_MOVE_FIELD_TO_VBAK user exits in MV45AFZZ include program.
I splited the order quantity against the confirmed quantity and added it as new schedule line in the XVBEP internal table and update UPDKZ flags for XVBEP & YVBEP.
Could anyone tell me is there any other way to do this without updating XVBEP? Because it is affecting some other place because of index table is not updating. How to you think use if update xvbap-etenr_high and update index table IVBEP1 for new line insert into XVBEP instead directly inseritng it into?
My code as follows:
xvbep-WMENG = t_temp-WMENG .
modify xvbep TRANSPORTING WMENG.
t_temp1- ETENR = '0002'.
if SY-SUBRC <> 0.
t_temp1-UPDKZ = UPDKZ_NEW.
modify xvbep TRANSPORTING WMENG UPDKZ.
endif.
With Regards
Raj

Have you got thru this one if so please provide me with the solution as i got the same req' ..

How to add crystal enterprise server in portal?

Hello, I am not familiar with SAP Portal, I am a little bit confused with the following direction from point 5. I don't know how to add the system in the landscape. I don't see the Edit list. The netweaver version is 2004.
To configure the BusinessObjects Enterprise server
1. From the top-level navigation bar, choose System Administration; then
choose System Configuration.
2. From the Detailed Navigation iView, choose System Landscape.
3. In the Portal Catalog, expand Portal Content.
4. In the folder containing the systems, right-click a system and choose
Open, and then choose Object.
5. In the System Landscape Editor, from the Edit list, select Crystal
Enterprise Server.
6. In the BusinessObjects Enterprise Editor, enter the following parameters:
u2022 Host Name of Crystal Enterprise Server:
Here you need to enter the BusinessObjects Enterprise server as fully
qualified host name (including the port).
For example: BusinessObjects001.business.net:1080
u2022 Path of BusinessObjects Enterprise Server:
Here you need to enter the path to the viewer application you want to
use for this system.

Hi,
the steps are under the assumption that you have a system already configured in the portal.
the values for the BusinessObjects server are just properties. If you don't have a system configured you would have to create a system first - otherwise you can set these properties for an exisitng system
ingo

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to integrate Oracle Enterprise Pack for Eclipse with Weblogic Portal

Hi
I am following this documentation http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14252/setup_dev_env.htm#i1013214
to setup my development environment for developing portal applications, but I cannot set it up, my eclipse does not have PORTAL perspective.
I have downloaded the Oracle Enterprise Pack for Eclipse 11gR1 (11.1.1.5) and the Oracle WebLogic Portal 10.3 as mentioned in the documentation.
The Oracle Weblogic Portal 10.3 includes a workshop version of eclipse, but that is not based on a recent Eclipse, that is why I would like to use the Oracle Enterprise Pack for Eclipse 11gR1 (11.1.1.5).
It is weird int he Oracle Portal 10.3 installation that I cannot install the Weblogic Portal without the Workshop.
Could you help me in this? How can I integrate the Oracle Enterprise Pack for Eclipse with Weblogic Portal?
Thank you.

For WebLogic Portal tooling you have a couple of options. For WebLogic Portal 10.3 and older, Workshop for WebLogic will be your tooling environment.
Starting in WebLogic Portal 10.3.2, which released this year, the development tools have migrated to Oracle Enterprise Pack for Eclipse. The WebLogic Portal 10.3.2 installer will install both the runtime and the IDE configured with additional WebLogic Portal Eclipse features (Portal Project Configuration, Perspecitives, Palettes, Deployment, etc).
If you are interest in the latest version, you can download from the WebLogic Portal OTN page - http://www.oracle.com/technology/products/weblogic/portal/index.html

How to install Oracle Enterprised Linux on VMware PLayer 4

Hi Everyone,
My name is John and I've a small issue which I would like to share with you and hopefully, you are able to assist.
My laptop is installed with a Window 7 Home Edition operating system and I've installed VMware-player-4.0.2. After reboot, I've also downloaded the file - V29609-01 which is the ISO file of Oracle Enterprise Linux 6.2.
After that, I've tried to create a Virtual Machine - Oracle Enterprise Linux using the VMware Player by specifying the path and file name of the V29609-01.iso file on my local c:\ drive. I've tried it several times, but every time it just returns the message - 'pxe-e53 no boot filename received' and it just hangs there without proceeding further. Please let me know what I've done wrong and the correct steps and procedures to solve this problem as this is my first time installing a Linux operating system. Thank you for your assistance.
Regards,
John

Hi,
Can you clarify and explain what is your exact meaning of 'Are you sure you've added the ISO to the VM to boot from?'? Because the following is what I did:
1.) Click the Create A New Virtual Machine.
2.) Select the 'Install disc image file (iso):' option and enter the full path of the V29609-01.iso (Oracle Enterprise Linux 6.2) file that I've downloaded from https://edelivery.oracle.com/. But underneath it, that is a message saying - 'Could not detect which operating systems is in this dsic image. You will need to specify which operating system will be installed.'
3.) Click 'Next'.
4.) I chose "Linux' under the Guest operating system and chose 'Oracle Enterprise Linux' under the Version drop down.
5.) Click 'Next'.
6.) I left the Virtual machine name as 'Oracle Enterprise Linux' and click 'Next'.
7.) I set the Maximum disk size to 300 GB and have the 'Split virtual disk into multiple files' option selected and click 'Next'.
8.) I have the 'Power on this virtual machine after creation' checked and click 'Finish'.
9.) A black screen displayed inside the VMware Player saying:
'CLIENT MAC ADDR: 00 0C 289 ......
PXE-E53: No Boot filename received
PXE-M0F: Exiting Intel PXE ROM.
Operating System not found
10.) And the process just hangs there.
Regards,
John

How to add Oracle Graphics 6i charts (OGD) to my Oracle Reports 10g

Hi,
Is there any possibility to add Oracle Graphics 6i Charts (.OGD) to Oracle Reports 10g
(OR)
If not possible, Can you please provide steps to migrate OGD to any format that is supported in Oracle Reports 10g.
Regards,
Swethan

Oracle Graphics and its OGD image format are no longer supported. Reports built with previous versions of Oracle Reports containing Oracle Graphics charts will continue to run in Oracle Reports 10g Release 2 (10.1.2) if the Oracle Graphics 6i runtime is installed on the same machine in a separate ORACLE_HOME. However, this is not a supported configuration, and Oracle will not fix bugs that result from this configuration.
Re-create all Oracle Graphics 6i objects using the Graph Wizard

Jdeveloper 10.1.3.1 how to add Oracle App server 10g 10.1.3

In our company we have installed IAS 10.1.3 on server which ip si: 10.1.5.230..
the home path is: /oracle/ias10g/...
I would like to add application server in Jdeveloper but I allways get the error:
Error getting OC4J Process for: opmn-home+oc4j-10.1.5.230-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
How I setup the connection:
Step 1:
Connection name: produkcija
Connection type: Oracle Application Server 10g 10.1.3
Step 2:
Username: xxxxxx
Password: xxxxxxx
delploy password: yes
Step 3: (here the problems come because I don't know if i select the right choice)
Connect to: Single instance
Host name: 10.1.5.230
OPMN port: 6003
OC4J instance name: home (is this ok? or I must insert the ORA home?)
Step 4:
Test connection:
Error getting OC4J Process for: opmn-home+oc4j-10.1.5.230-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
I can access the Enterprise Manager trough:
http://asctiast2:7777/em/
user/pass:
oc4jadmin/welcome1
what may be wrong? and what is the right procedure to setup connectio to my IAS?
best regards

Error connecting to OPMN (is it running?): Connection refused: connect
Run the following command:
C:/>OPMNCTL STATUS
Does the output indicate OPMN is running?

How to add Oracle Enterprise Scheduler Extensions to JDeveloper 11.1.1.4?

Similar Messages

Maybe you are looking for