How to add these symbols to Photoshop

Hi there,
I am trying to add some texts to my picture in photoshop and I would like to add symbols like the ones I attached here.
Does anyone know where to find and how to add them?
thanks,
Rose110ca

You need to ues the text tool from the toolbox. Simply click it and put it on a location you would like to create a text layer. Once created you can use the selection tool to move it around.
Vancouver wedding photography <a href="http://www.vividdreams.ca">vancouver wedding photography</a>

Similar Messages

How to Edit Flash Symbol in Photoshop?

In Flash CS4, I have a graphic of a long filmstrip with 24 pix in it. I need to edit the symbol in photoshop (to put all new pix in), and then replace the current filmstrip with the new filmstrip. How? This is CS4, not CS5.

Add an image to a folder with your fla, image folder(with image inside) and then re import image to stage again then try 'EDIT' the file!
Date: Sat, 24 Sep 2011 13:31:35 -0600
From: [email protected]
To: [email protected]
Subject: How to Edit Flash Symbol in Photoshop?
    Re: How to Edit Flash Symbol in Photoshop?
    created by sneedbreedley in Flash Pro - General - View the full discussion
Whe nI double click on the image, a Bitmap Properties window opens with no option to edit. When I right-clcik on the image and select Edit With and choose photoshop, an error message appears saying The file G:\web-02\Site\film120902.gif does not exist, uable to launch external editor.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3936238#3936238
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3936238#3936238. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to add these system in the system ID list?

Hello:
    Now I have a another problem in Setting Up Central Auto-Reaction Methods.I have created in solution manager, In the system ID list,I want to have development system ,production system,and other system,because I want to alert these system,but I don't know how to add these system in the system ID list?Dose it need RFC?
    Please someone tell me.
     lexian
     Thanks a lot!

Lexian,
You need to some of these things for the SAP systems to show up in Solution Manager
1. Install the Monitoring Agents (SAPCCM4X for ABAP instance and SAPCCMSR for J2EE instance etc)
2. Configure RFCs from Solution Manager to the Satellite (SAP) systems.
3. Create CSMREG user.
4. Create Monitoring jobs.
These are just some of the things that you will have to do. Refer this link on how to do this
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm.
This is for the broader view of the entire thing
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm
I would suggest starting with the second link.
Let us know if you have any questions
Kunal

How to add a symbol to existing keyframes

I have completed a bunch of keyframes with 2 symbol on each moving around. Now I want to add another symbol that will be static. That is, at the same position in each keyframe.
How can I add the new symbol to 250 keyframes that are already set and already have 2 symbols in each?
I can see how to do it one by one... but there must be a better way than that. selecting a herd of keyframes and pasting in the new symbol, ends up only effecting which ever one has the play head.
I also realize I should have put this final symbol in at the start but too late now. So how can I insert a new symbol in 250 keyframes all at once?

Create a new layer for this new symbol. Place the symbol in the first frame. Right click the last frame on that layer where you want the symbol to extend to (250?) and select Insert Frame.

How to add purchased filter to Photoshop CC? [was:filter]

как добавить купленный фильтр в Photoshop cc?
How can i add bought filter at photoshop cc?

Which filter?
3rd party vendors normally provide installation instructions for their products.

How to add these modules?

Hi everyone, how can i add these modules listed below? I tried to query them but can't find them. Are they part of another module or what?
•     General Ledger
•     Accounts Payable
•     Fixed Assets
•     Payments & Collections
•     Accounts Receivable
•     Cash & Expense Management
•     Project Costing
•     Project Billing
•     Purchasing
•     Self-Service Procurement
•     Sourcing
•     Procurement Contracts
•     Supplier Portal
•     Inventory Management
•     Reporting
•     HR
•     Cost Management
•     Product Master Data Management
•     Order Management
If someone can help me figure out how to get these added I would really appreciate it.
Thanks!

Hussein Sawwan wrote:
Please post the details of the application release, database version and OS.
Hi everyone, how can i add these modules listed below? I tried to query them but can't find them. Are they part of another module or what?Where do you want to add them?
You can check if those modules are licensed from OAM -- http://docs.oracle.com/cd/E18727_01/doc.121/e12894/T202991T469980.htm#zzbegin
If you want to add the responsibilities, navigate to System Administrator > Security > User > Define, query your username and assign the responsibilities.
Thanks,
HusseinI'm sorry, I didn't word my post correctly. I'm running 12.1.1, db 11gR2 11.2.0.2 on OEL 5.7. I installed with Vision Demo Database
What I meant to ask is how do I add those responsibilities to a user. When i query the names listed above. I can't find a match for most of them.

How to add Servicemark symbol?

I've seen how to add copyright and trademark symbols, but does anybody know how to add the servicemark (SM) symbol?
Thanks.

Mac OS >> FInder >> edit >> Special Characters > type service in search at bottom right
Trouble is many fonts do not have this, so you may prefer to set a superscript SM.

How to add your method in photoshop plugin & call it from javascript?

pls help me i have to add a method in photoshop sample plugin & call it through any script like javascript?don't have to use any listener like script listener?

You create the plugin, so you defined the terminology for the plugin.
So there should be no reason to use the listener because you already know the terminology needed.

How to add a symbol to the beginning of a project?

I have a pretty intricate Animate composition. I want to add a simple Symbol/Animation at the beginning. I've tried inserting time and it did nothing. Basically, I just want to shift everything over a couple of frames. I thought of turning the balance of the composition into a symbol, but a lot of the interactivity is based on Labels on the stage's main timeline, and it breaks when I try to convert to a symbol. I'm not sure what I'm missing here? Any help would be truly appreciated!
Thanks!
Jon

Hiya Res,
I will definitely give it another shot. I tried that, but I think I might've given up too easily . I'll let you know how it works out.
Thanks!

How to add one symbol for field in mapping

Hi Experts,
I am doing proxy to file scenario.
my requirement is like this, i need to add ~ symbol for each fieldbefore sending to receiver.
if the field length eqal to 12 the target field must be like this.
if the field is contains 6 characters the remaining characters must be filled with spaces and after hat i need to add ~ symbol.
~978976 ~
How can achieve this, can anyone help me.
Kind regards,
Praveen.
Edited by: Praveen Kumar on Aug 4, 2009 1:09 PM

Hi,
In my understand String.format standard function will support JDK1.5 onwards. Lower version will not support. So,check in your jdk version before use that standard function.
So another way use this code,
UDF header like this,
Public String <udf name>(String a, Container container))
Inside UDF put this code:
int strLen = a.length();
for(int i=strLen;i<12;i++)
a = a + " ";
return "~" + a + "~";
Note: . Example: in this code field length is using 12. becaz we mentioned that loop i<12. If what you need put it instead of 12.
Hope It's working fine .
Regards
Vijaykumar

How to create these shapes in photoshop?

For my PhD research, I would like to construct 3 kinds of images on photoshop. I want to transfer it to the piece of glass where I will conduct some experiments. If you please help me to construct such kind of images on photoshop, I will remain thankful to you:
Image 1:
This is non uniform kind of a pattern in which different shapes of pentagons/ hexagons etc are situated at different intervals.
Image 2:
This is the regular pattern. I dont know how to create it. Also if I can change the thickness of the black shade, what I need to do?
Image 3:
This is a pattern in which we want to connect the different size balls to the neighbouring ball. Please note that the thickness of the line is varying and the size of the balls is also different... Please note also that I want to populate this configuration randomly.

They are probably all better done in Illustrator first.
I will post some examples of what you might do tomorrow.
For instance though not quit right the technique is good.
1. I drew a rectangle with gray fill no stroke.
2 Then rasterized the rectangle
3. Applied a Object>Object to Mosaic and chose to delete the raster
4 Applied a roughen effect to it
5. expanded the object and made some manual moves for some of the resulting objects
6 Made a black rectangle large enough to encompass the art and sent it to the back
7 I selected all and with the pathfinders minus the front.
and used it for a clipping mask
8. Made another rectangle
You can now probably bring this into Photoshop and so some more work on it and you are fine.
Now you will have to experiment with the adjustments for the Mosaic and the roughen and might want to add an effect or two.
Oh yes I also used the alignment panel to redistribute the objectsI am not certain that is hepful.
I may have gone too far with the roughen filter.

How to add the  symbol

Hello again-
How do I add the Apple () symbol to my posts? I just did this one by copying and pasting from another thread, but I am sure there is a better way.

Hi Miriam,
Yes I went and slept after I posted to you.
I presume the 4 key where I see the $ as Shift + 4
Mine on my Wireless Keyboard is marked as also having the Euro sign there (€) which on my Mac keyboards is Alt + 2 but I would guess is possibly somewhere else on yours.
Also Hi skalicki`
(That trailing tick sort of symbol also has me fooled I had to Copy and Paste)
Can I thanks you for the Points.
P.S. I think I have found it.
The Mac Keyboard and the one I am using seem to also interchange the keys left of Z and to the left of 1 of the Qwerty part. (not number pad)
7:39 PM Friday; May 22, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

How to add ASCII symbol to Front Panel

Hello,
I am trying to add an ASCII character to the front panel but I cannot figure out or find out how to do it. It should be ALT key plus the decimal code I thought.
Any help would be appreciaited.
John

you can enter an "e", select the character, and change to symbol font.
LabVIEW Champion . Do more with less code and in less time .

How to add a symbol to the stage with a unique click function

I created a symbol in the Library and am loading multiples of it based on json data. However, I want to give each one a unique click function based on the json data. For example if you are the 4th symbol, you should change the color of another symbol when clicked. However, if the 5th symbol is clicked, it should be a different color. And so on.

What I would do:
add a class name for each symbol in your json file or on symbol creation.
Then use each class name and assign it a click event.
to assign a unique id or class to symbol you create use:
for (var i=0;i<data.length;i++){
var el = sym.createChildSymbol("pEl", container);
el.element.attr("id","newEl"+i);
// or for a class use el.element.addclass('className'+i);
Note when using the new id make sure you add # in name
example
sym.$('#pEl'+i).......
and a dot for the class name
sym.$('.className'+i) ..............

How to add edited text from photoshop to dreamweaver

I edited text in photoshop to make it look nice and sparkly. I am trying to put it in a flash site but do not understand how. the context file only allows you to choose the color and type of font but nothing more such as drop shadows and such. when i go to edit the context code for the flash site what would the code for edited text in photoshop look like in dreamweaver context editor?

I am not sure I understand? There is no Photoshop code?
You would take the image you created in Photoshop and place it into your Dreamweaver document. Correct me if I don't understand what you are trying to do.
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

How to add these symbols to Photoshop

Similar Messages

Maybe you are looking for