How to add third party dll in our installer using application builder?
Hello friends,
I have one application (VI) which is using some third party dll of protocol and now I want to make a installer which should install dll along with application exe. Please suggest the way ..
Thanks
Solved!
Go to Solution.
Hi,
I placed it in project file and included it in category of "Always Included" in exe creation. Then after i created installer with needed NI drivers. But this installer didn't registered the dlls in project file. I registered it manually using regsvr32 command..
Any help to do it automatically during installation..
To brief my words, I need help to understand the process of third party dll registration during installation of installer created by application builder..
Thanks
Similar Messages
-
How to add interface to customlize MXML Component when use Flex Builder 3?
How to add interface to customlize MXML Component when use
Flex Builder 3?David,
I don't believe you can add the interface via the creation
dialog in FlexBuilder 3. You can always manually add the
"implements" property to your MXML Component root tag. Something
like this: <mx:VBox implements="com.mycorp.IMyInterface">
If you want autogeneration of the interface, then create an
ActionScript class with that interface and then copy the generated
functions and setter/getters into the script block of your MXML
component. -
Add third party dll to solution
In my solution/web part, I used a third party dll (newtonsoft.json.dll). I have added the dll to the solution and project level. I do not see the dll when I tried to add a reference. Please see the attached screen shot. Please let me know what is the correct
way to add a third party dll to a SharePoint solution/web part. Thanks lot.(1) I already tried to add the dll from the .NET Framwork 4.5 folder. Then reference the dll from disk location. However, I got a "File not found exception" error.
(2) I search on the web, some people suggest to add the dll as part of the solution. So I added the dll to the solution and project as "exiting item". However, I cannot reference to dll what is in the solution/project (please see my early
post). -
How to add third-party jar in CRM ISA application?
Hello SDN!
I need to add third-party jar in CRM ISA application. I know how to add such jars in common case and for local DCs. But for CRM I can't determine which DC should contain this third-party jar.
Please tell me ASAP which DC (e.g. crm/isa/home/ext) I should use.
Help will be appreciated.
Regards, Lev.Hi,
To add third party jar you need to create new DC which contain your third party Jar. Once you have new DC with your Jar file you can add as Used DC in required DC.
Please refer [Using External Libraries for Development with NWDI|http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/3ce3e4df201d63e10000000a11466f/content.htm] for more infromation to create DC with Jar File.
eCommerce Developer. -
How to add third-party libs to Java WAS for my Webdynpro DC?
Hello all,
Here is my scenario:
I have some thrid-party libs(some jars) which is necessary to my Webdynpro application. It is ok to add these files in the webdynpro project's classpath. But because these jars are missing on my server, somy webdynpro app not works.
Could anyone give me some proposal for this kind of problem? How to add these jars to the J2EE server and access them in the webdynpro project?
Thanks and Best regards
DeyangHi Deyang,
Also add these jars in the <b>lib</b> folder of your WebDynpro application. Open the application in the <b>Navigator mode</b> and there under the folder structure you will find the lib folder. Copy and paste these required jars in this folder as well.
See this pic:
<a href="http://img508.imageshack.us/img508/4614/jars9jq.jpg">Put jar files in Lib Folder</a>
This will solve your problem.
Regards
Pravesh
PS: Please consider rewarding points if helpful and solved. -
How to use Third Party DLL in Adobe Illustrator Plug In
Hi Everyone,
I want to design plug-in for Adobe illustrator CS6(64 bit). As first step I am referring sample plug ins from ../SDK/SampleCode. I am not getting how to use third party DLL in plug in.
Please let me know how to refer C# DLL in illustrator plug in.
Thanks in advance.There's no C# API for the Illustrator SDK, so your plugin must be C++ at the very least. That said, you can probably write a bridge if you need to call out to a C# library/DLL.
-
How to integrate third party API and DLL
Dear sir/Madam
How can i integrate the third party high level API and DLL into my DLL, project keeping in view that all their functions and their definitions kept hidden. i have tried it but when importing the functions in the DLL and export the high level functions, compiler demands their declarations and prototypes.
Is their a way to hide all these high level functions and still utilize them.
thanks, regards
ZafarHi Matrix39,
The compiler will still need the proper prototypes for the functions called in the third party DLL to compile your DLL whether you are using explicit or implicit linking to call the functions. Declaring these prototypes in your DLL does not mean they will be exported by your DLL. The functions exported by your DLL can be configured by navigating to Build»Target Settings in CVI. From here you can configure what functions your DLL exports by clicking the Change... button in the Export section. There are several options for specifying the functions including using header files and manual export declarations. See the CVI Help for more information.
Justin D
Applications Engineer
National Instruments
http://www.ni.com/support/ -
How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.
Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset. -
Deploying third party dll from solution
Hi,
I am creating a visual webpart in which i have added the Telerik RadGrid.
I have added the Telerik.web.UI dll in the Reference and is refered from the GAC. I have build the solution and grid works fine in my local dev environment.
I would like to know how to package the solution, so that the third party dll is also added to the GAC and to the safe controls.
How to achieve this? If possible, please elaborate the steps.
ThanksHi Mahindrakar,
I have used the right name of the dll in my code. I didn't understand, what you are saying about readme file ?
I getting the following error with
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Certification.VisualWebPart1.VisualWebPart1UserControl.Page_Load(Object sender, EventArgs e) +187
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +24
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +41
System.Web.UI.Control.OnLoad(EventArgs e) +131
System.Web.UI.Control.LoadRecursive() +65
System.Web.UI.Control.AddedControl(Control control, Int32 index) +349
Certification.VisualWebPart1.VisualWebPart1.CreateChildControls() +154
System.Web.UI.Control.EnsureChildControls() +145
System.Web.UI.Control.PreRenderRecursiveInternal() +60
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3393
One thing, i know very well, only problem in adding reference only.
The above thing may helpful for you, giving me solution.
Thanks
Aasai. -
Hi,
I want to convert word document to PDF, EPub, by using third party (.dll).
In SharePoint designer workflow in 2013.
So that I have question, Can we Install third party (.dll) in SharePoint workflow Designer for conversion?
Means I have created one simple application conversion of word to e Pub, PDF, Image by using (Spire.doc dll) in Visual Studio.
So this same conversion I want to work in SharePoint designer workflows?
So anybody has any solution then please provide me.
Thanks,
Samadhanit might be worth looking at these CodePlex steps, that plug directly into the Word Automation Services.
http://sp2010wordautomation.codeplex.com/
It'll provide you with a configurable step like the below that should help you achieve your aims
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Where is the right path to deploy third party DLL? "Support Files"?
Hi, After Effetcs developers:-)
Here is question about install path of DLL for After Effects plug-in.
I'm developing Effects plug-in run with CUDA, so I have to deploy third party DLL to client PC.
So where is the right path to put DLL such as cudart32_30_14.dll?
I think it's under "Support Files", because my plug-in runs with cudart32_30_14.dll
in "C:\Program Files\Adobe\Adobe After Effects CS4\Support Files"
Am I right?well... that depends.
when you rely on an external library, the external dll is expected to be somewhere along the path, as it appears in the command prompt.
places like win32, and sxs folders are in that path.
you could also put the support dll in the same folder as your plug-in. any process automatically includes it's own directory in the search path.
if you don't want to put it in any of these pre-set locations, then you have to program the path into the dll loading function.
if you choose to do that, you can put the support dll anywhere you like. -
How to make third party cables work on iphone?
I have been using the original Apple charger cable that came with my phone (iPhone 5C) for a good year, but then it broke. So I bought this non-Apple cable because I didn't really wanna spend a lot of money for an original one. I have already charged my phone with third-party cables before, so I thought it would work. The first time I used the non-Apple cord, there were minor difficulties because I had to plug and un-plug it several times before it actually charged. 2 days later, I plugged an original cable (which was my sister's) to charge my iPhone. Obviously, it worked. But later on, when I went to charge my iPhone with the non-Apple cable, a message popped up (This accessory may not be supported). I dismissed it, thinking it would still charge. No such luck. I tried to unplug and plug it, but still, it won't charge. Now, I have to charge through my laptop. Can anyone tell me how to make third-party cables work? I don't really wanna bring my laptop everytime I charge. I'm planning to only use this cable until I get my hands on an original one. Please help.
Are you seeing the EE (or T-Mobile) network name and network bars in the top right hand corner of the screen? Turn off WiFi (Settings>WiFi - turn this off). Is there anything next to the network name in the top right hand corner (3G, E or o)? E is Edge and o = GPRS.
If there's nothing next to the network name, turn off the iPhone and then turn it back on. To do this, press and hold down the button on the top until you see the 'Slide to Power Off' message. Slide and then wait for the iPhone to shut down. To turn it back on again, press and hold the top button again unti lkthe Apple logo shows on the screen.
EE and signal bars top left = Yes
Turned off Wifi and next to the EE is 'o' which you say is GPRS? What does that mean please??
Got this reply from another forum but still no success??? -
How to configure third party order ?
how to configure third party order ? and how the business know that the customer has received the goods so that invoice to be raised?
hi shoban,
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1) After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
step 2)
the item category in the order should be manually changed as TAS.
For that you need to confugure the item category determination
ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
OR + NORM + + = TAN . + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevnat for billing indicator as F
step 4)
The schedule line cateogry for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
Hope it helps
Mastan -
How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
Thank you.Hi ,
Your windows is 32 bit or 64 bit .
If win 7 32 bit
Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
If win 7 64
PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
Thanks, -
Compressor Audio plug-ins (can you add third party audio plug-ins?)
Compressor Audio plug-ins
Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
cheers
steveHi B
Really sure You are looking into Your "user" folder ?
In this there is a folder with in my case "my account" eg "Bengt"
in this ther IS a library folder
and in this ther should be an iMovie folder. If not I would make one
and into this put a folder "Plug-ins" and in this put Your plug-ins.
Restart Your Mac and open iMovie and see if it found the new plug-ins.
Yours Bengt W
Maybe you are looking for
-
Desktop Manager Install Error 1904, nothing resolves...
I have been having the following problem the last few days. On my work desktop (WinXP x64) I installed the DesktopManager software without hitch, but on my home desktop (WinXP Pro SP3) I also keep getting the error message: Error 1904.Module C:...GW
-
I am deploying an application using firefox. I am using the mozilla.cfg file to lockdown firefox and I don't want firefox to be the default browser.
-
Sending more than 1 file as attachments in FTP
Hi, Seeking your inputs as how to send more than 1 file ( *.txt, *.jpg etc..) as attachments using FTP adapter. Thanks in advance, Regards, Pavithra
-
How do you edit cropped audio?
Hello everyone I would like to apply a cutoff to the frequency range of my audio using Crop, then edit the cropped audio in the Multitrack mode. The following page explains how to crop audio but doesn't explain how to make edits to it in the Multitra
-
Unable to connect with the wireless feature
I have the Linksys WRT54G version 8.0, it bridges with my DSL modem. I have 3 wired desktops and 1 wireless laptop (which does not connect without wired connection). According to the easylink advisor, we do not have an internet connection. But I h