Add third party dll to solution
In my solution/web part, I used a third party dll (newtonsoft.json.dll). I have added the dll to the solution and project level. I do not see the dll when I tried to add a reference. Please see the attached screen shot. Please let me know what is the correct
way to add a third party dll to a SharePoint solution/web part. Thanks lot.
(1) I already tried to add the dll from the .NET Framwork 4.5 folder. Then reference the dll from disk location. However, I got a "File not found exception" error.
(2) I search on the web, some people suggest to add the dll as part of the solution. So I added the dll to the solution and project as "exiting item". However, I cannot reference to dll what is in the solution/project (please see my early
post).
Similar Messages
-
How to add third party dll in our installer using application builder?
Hello friends,
I have one application (VI) which is using some third party dll of protocol and now I want to make a installer which should install dll along with application exe. Please suggest the way ..
Thanks
Solved!
Go to Solution.Hi,
I placed it in project file and included it in category of "Always Included" in exe creation. Then after i created installer with needed NI drivers. But this installer didn't registered the dlls in project file. I registered it manually using regsvr32 command..
Any help to do it automatically during installation..
To brief my words, I need help to understand the process of third party dll registration during installation of installer created by application builder..
Thanks -
Deploying third party dll from solution
Hi,
I am creating a visual webpart in which i have added the Telerik RadGrid.
I have added the Telerik.web.UI dll in the Reference and is refered from the GAC. I have build the solution and grid works fine in my local dev environment.
I would like to know how to package the solution, so that the third party dll is also added to the GAC and to the safe controls.
How to achieve this? If possible, please elaborate the steps.
ThanksHi Mahindrakar,
I have used the right name of the dll in my code. I didn't understand, what you are saying about readme file ?
I getting the following error with
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Certification.VisualWebPart1.VisualWebPart1UserControl.Page_Load(Object sender, EventArgs e) +187
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +24
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +41
System.Web.UI.Control.OnLoad(EventArgs e) +131
System.Web.UI.Control.LoadRecursive() +65
System.Web.UI.Control.AddedControl(Control control, Int32 index) +349
Certification.VisualWebPart1.VisualWebPart1.CreateChildControls() +154
System.Web.UI.Control.EnsureChildControls() +145
System.Web.UI.Control.PreRenderRecursiveInternal() +60
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3393
One thing, i know very well, only problem in adding reference only.
The above thing may helpful for you, giving me solution.
Thanks
Aasai. -
Hi,
I want to convert word document to PDF, EPub, by using third party (.dll).
In SharePoint designer workflow in 2013.
So that I have question, Can we Install third party (.dll) in SharePoint workflow Designer for conversion?
Means I have created one simple application conversion of word to e Pub, PDF, Image by using (Spire.doc dll) in Visual Studio.
So this same conversion I want to work in SharePoint designer workflows?
So anybody has any solution then please provide me.
Thanks,
Samadhanit might be worth looking at these CodePlex steps, that plug directly into the Word Automation Services.
http://sp2010wordautomation.codeplex.com/
It'll provide you with a configurable step like the below that should help you achieve your aims
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Compressor Audio plug-ins (can you add third party audio plug-ins?)
Compressor Audio plug-ins
Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
cheers
steveHi B
Really sure You are looking into Your "user" folder ?
In this there is a folder with in my case "my account" eg "Bengt"
in this ther IS a library folder
and in this ther should be an iMovie folder. If not I would make one
and into this put a folder "Plug-ins" and in this put Your plug-ins.
Restart Your Mac and open iMovie and see if it found the new plug-ins.
Yours Bengt W -
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Where is the right path to deploy third party DLL? "Support Files"?
Hi, After Effetcs developers:-)
Here is question about install path of DLL for After Effects plug-in.
I'm developing Effects plug-in run with CUDA, so I have to deploy third party DLL to client PC.
So where is the right path to put DLL such as cudart32_30_14.dll?
I think it's under "Support Files", because my plug-in runs with cudart32_30_14.dll
in "C:\Program Files\Adobe\Adobe After Effects CS4\Support Files"
Am I right?well... that depends.
when you rely on an external library, the external dll is expected to be somewhere along the path, as it appears in the command prompt.
places like win32, and sxs folders are in that path.
you could also put the support dll in the same folder as your plug-in. any process automatically includes it's own directory in the search path.
if you don't want to put it in any of these pre-set locations, then you have to program the path into the dll loading function.
if you choose to do that, you can put the support dll anywhere you like. -
How to use Third Party DLL in Adobe Illustrator Plug In
Hi Everyone,
I want to design plug-in for Adobe illustrator CS6(64 bit). As first step I am referring sample plug ins from ../SDK/SampleCode. I am not getting how to use third party DLL in plug in.
Please let me know how to refer C# DLL in illustrator plug in.
Thanks in advance.There's no C# API for the Illustrator SDK, so your plugin must be C++ at the very least. That said, you can probably write a bridge if you need to call out to a C# library/DLL.
-
How to add third-party jar in CRM ISA application?
Hello SDN!
I need to add third-party jar in CRM ISA application. I know how to add such jars in common case and for local DCs. But for CRM I can't determine which DC should contain this third-party jar.
Please tell me ASAP which DC (e.g. crm/isa/home/ext) I should use.
Help will be appreciated.
Regards, Lev.Hi,
To add third party jar you need to create new DC which contain your third party Jar. Once you have new DC with your Jar file you can add as Used DC in required DC.
Please refer [Using External Libraries for Development with NWDI|http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/3ce3e4df201d63e10000000a11466f/content.htm] for more infromation to create DC with Jar File.
eCommerce Developer. -
Can we integrate third party tool with solution manager
Can we integrate third party toll with solution manager , If it is possible what API's we have?
Hi Santosh Asuthkar,
thank you for your answer.
I've already read the steps in trx. spro and several documentations in sdn.
There was a hint to trx. ictconf, wsconfig, lpconfig, wsadmin. If you call these transactions there
is a message that these trx. are old and trx. SOAMANAGER should be used.
Question is how to activate the webservice "ICT_SERVICE_DESK_API" in SOAMANAGER.
I've never handled with bindings and proxy classes.
Best regards
Klaus -
Cisco UCM with Third Party Contact Center Solution
Hi all, hope everyone is well.
Anyone out there running Cisco UCM with a third party contact center solution ? would love to hear your experience on this subject.
Thanks in advance !!
DannyI have not heard of any sucessful stories, which vendor are you considering and what would you not go with UCCE/UCCX?
I used to work for Rockwell (Aspect today) which attempted to integrate their Business Contact Solution with CUCM (back on 3.3) and it worked OK for low volume calls, but never had any customer adoption.
I have not heard of any other known ACD vendors integrating with CUCM.
Chris -
Third-party tools for solution manager
Hi all,
Im new for solution manager a i just want to know whats SM tools and whats the third-party tools integrate and interface with SAP Solution Manager and if will be more third party tools?? ( Whats the add on tools SM have??)
regards
TimHi Murali Narayanan
If you wan to achieve monitoring from technical perspective, the way that was introduced by shivjansi might be the option.
If you want to check the entry of specific table in stand alone MSSQL to ensure the business process that use MSSQL
stand alone DB, you can use BPMon remote DB monitoring that enables monitoring of non ABAP/ non SAP that supported
by netweaver like MSSQL, Oracle, DB2.
By using this function, you can monitor the entry of your stand alone SQL server.
For example, stand alone SQL Server has some table that contains some error,
or there is application table and in one row that it indicates error or completeness.
Now if you want to check these error document or incomplete document in the DB,
you can use BPMon remote DB monitor.
By monitoring this, you can ensure whether there is issue in your business or not.
You can find out how to setup from following link.
http://service.sap.com/bpm
->technical detail ->Setup Guide for non-ABAP/non-SAP
P14 (The monitoring object u201CGeneric Table Entry Counter for remote DBu201D (NATABCNX) )
is related description.
(In the document, it also introduce some other way using web service).
Also in same link, you can find out other document like how to setup BPMon.
Also there is some blog about table entry counter. it is for SAP ABAP system.
But the function is more or less same for remote DB.
So you can also check following blog to have more understandable image.
/people/volker.vongloeden/blog/2010/07/16/create-your-own-customer-specific-key-figure-for-business-process-monitoring-within-5-minutes
Best Regards
Keiji -
Where to add Third Party JDBC Driver in SQL Developer 4.1 EA2
In SQL Developer 4.0.3 under Tools - Preferences - Database there was an option to add a Third Party JDBC Driver so we could use the same tool for a PostgresSQL database. I cannot find in in SQL Developer 4.1.0.18
I think it happened because I imported settings and connections from a previous installation.
I removed the C:\Users\username\appdata\SQL Developer\system4.1.0.18.37\ folder.
I've run it now without that and the option is back.
Thanks! -
Integrating third party system with solution manger
Dear All,
How we can do integration between third patrty system and solution manager. As part of our implementation we have got some other application to be integrated with SAP . We have got ECC 6.0 and Solution manager.Can any one guide me how to do this,
Thanks
HanyHi Pankaj,
Yes this is possible.
Create an RFC using SM37 transaction.
Build the logic to retrieve the data.
The 3rd party system also should have the necessary logic to be triggered once there is a call from RFC & get the primary keys based on which it will retrieve data & pass it to SAP.
Best regards,
Prashant -
How do I add third party apps to launchpad?
I have a number of third-party apps that I use infrequently, so I don't want them on the dock, but would like them in Launchpad, rather than having to search for them. How can I add them to Launchpad?
Ooops, my bad. I did not realize that there was another dot at the bottom of Launchpad for a second page, and it contains my third-party apps!
Maybe you are looking for
-
Attempt to set a parameter name that does not occur in the SQL: vc_temp_1
I have query view object build on the following sql select nvl(u.full_name,e.arabic_first_name||' '||e.arabic_family_name) as empName, (select sc.general_specialty from ta_scientific_certificate sc where sc.user_id=u.user_id group by sc.general_speci
-
Error in import com.sap.mbs.ca.ur.enum.MessageType
Hi, I try to import MAM30 SP5 in NWDS (7.1 SP03). After doing that I get an error that class com.sap.mbs.ca.ur.enum.MessageType; is missing. In fact this class is part of the mbsui.jar file which is located in the lib folder of my application. Messag
-
Editing in Photoshop or Photoshop Elements: Basic workflow
This question was posted in response to the following article: http://help.adobe.com/en_US/lightroom/using/WSF9ADEA57-1D69-43c5-B169-25A07CEC38CC.html
-
PCI-6023E DAQ card maximum sampling frequency
Hello I am using PCI-6023E DAQ card in pc-based ETS solution (and writing appilication in LabView 7.1 with RT module). The card has 200kS/s maximum sampling frequency, but it can be set for much higher sampling frequencies and the waveform acquired a
-
Spotlight and Find not working
Hi everyone Apologies if I'm covering old ground here. I don't use either Spotlight or Find very often, but discovered recently that neither now works. From other posts, I think this may have started when I installed the 4.11 software update. There a