How to add three signals in multisim to make a resultant

Hello,
I want to add three signals say of 1)60hz 2V 2)3hz 20mv 4)DC of 4V to get a resultant.
Can someone help me with this.
Thanks in Advance.

Connect voltage sources in series.
Lynn

Similar Messages

How to add three views in MM01

How to add three custom views in MM01 based on material type.
Regards,
Malla

hi,
This will solve your problem.
[https://forums.sdn.sap.com/click.jspa?searchID=19403068&messageID=5708251]

How to add three values together?

Hi,
I'm working on a program which is supposed to be able to add three numbers together like this: (notice that the program asks for three numbers. these three numbers are the ones to be added up, see below)
Enter number one:
*5*
Enter number two:
*10*
Enter number three:
*15*
What i want the program to do is to add these three numbers together and print THE SUM (30) not the three numbers. This is how the code which I use to print out the values looks now:
System.out.println("the sum of the numbers is" + (num1) + (num2[i]) + (num3[i]) + "hours");
What the programs does is that instead of printing the sum (30), it prints: 51015 (thus, the typed numbers, side by side...).
What can i do to make the program print the sum of the three numbers and not the three numbers itself. Thanks in advance..
Edited by: mikk3l on Sep 16, 2007 6:03 AM

thx for the tip, still doesn't work though. This is how it looks:
First part, declaring variables:_
String aname;
         int i = 0;
         String[] name;
         name=new String[3];
         String[] aa;
              aa= new String[3];
              String[] ab;
              ab=new String [3];
              String [] ac;
              ac=new String[3]; and here is the second part where the program is supposed to print the sum of aa, ab and ac:
System.out.println(aname + " has totally " + ((aa)+(ab[i])+(ac[i])) + " hours");
Please let me know if there's any other part of the code you need.*

How to add three buttons to a Dialog Page?

Hi,
I have a requirement where in i need to add three buttons yes , no, cancel on the dialog page.
But in the examples specified in OAF guide it has only two buttons.
I m in urgent requirement of this.
Could anyone help me in this regards?
Thanks,
Mandar

It is not a supported feature. Check the constructor of OADialogPage and it supports a max of only 2 button urls.
OADialogPage(byte messageType, OAException descriptionMessage, OAException instructionMessage, String okButtonUrl, String noButtonUrl)
--Shiv

How to add three columns under a column of Column Structure in BEx Query ??

Hi all,
    I have created a Structure for Taxes (with 10 rows) under Rows and another Structure for Company under Columns and it has 3 columns like Company A, B & C. Now I want to have three columns (Actual, Forecast & Total) under each company A, B & C. It means it will have 9 columns under these 3 companies.
The ACTUAL should calculated as:
          Version = 100 and
          Months = Plan Begin Month - 1.
If the Plan Begin Month is 4 (April) then ACTUAL should be calculated for first 3 (4 - 1) months only.
   The FORECAST should calculated as:
          Version = 699 and
          Months = From 4 (April) to 12 (December).
   'Plan Begin Month' will be entered on the selection screen.
   How can I design this query, PLEASE ?
    Thanks in advance.
Regards,
Venkat.

Hi Ravi,
    Thanks for your quick response.
    The ACTUAL should calculated as:
          Version = 100 and
          Months = Plan Begin Month - 1.
          If the Plan Begin Month is 4 (April) then ACTUAL should be calculated for first 3 (4 - 1) months only.
   The FORECAST should calculated as:
          Version = 699 and
          Months = From 4 (April) to 12 (December).
      I am unable to create the Restricted Key Figure with Version.
     How can I design it, PLEASE ?
Thanks,
Venkat.

How to add three fields in Sales order item level and supress/hide many

Hi Gurus,
My client requirement is :
1. Three fields to be added at Sales order Item level and they should flow till billing.
2. Supress/hide most of the fields in Sales order, so that end user will be happy( thru SHDO how to do)
Please share your experiences and help me.
BEST REGARDS
Srikanth

Hi Subba Rao
in VA01 screen - Material /qty/ after entering this client wants to enter three more details say X/Y/Z
and after that he dont want to see maximum fields displayed in VA01 Screen.
I think it makes sense.
Regards
Srikanth

How to add three batches for a single material during vendor return through

Dear All,
We have to sent back some stock to vendor through MBRL.This stock consist of two batches.But during MBRL i could able to enter only one batch.How can i give more batches in this screen.
Please give the inputs.
Thanks and regards,
deepti

If you are doing it with MBRL, then you have to specify a material document number.
So the posting can only have the same info as SAP could adopt from this material document.
You probably have to execute MBRL several times

Exchange 2010 - How can add a meeting room resources and make it available to users to view and book a room

Hello,
I need to setup a group of meeting rooms in Exchange to enable (approx 300) users to view and book rooms.
I would be very grateful if anyone has a step by step guide they can share with me.
Many thanks !

http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/resource-mailboxes-exchange-2010-part1.html
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Add three years to a date

Hello all,
How to add three years to a date? Please keep in mind the February month.
Thanks

Hi,
Please check FM RP_CALC_DATE_IN_INTERVAL.
data: wa_date like sy-datum.
call function 'RP_CALC_DATE_IN_INTERVAL'
         exporting
              date      = sy-datum
              days      = 0
              months    = 0
              signum    = '+'
              years     = 3
         importing
              calc_date = wa_date.
write: / wa_date.
Regards,
Ferry Lianto

How to Ignore the signal?

Insert a number if the number of digits of that number is greater than its average return true else false.
So what i'd like to know , (and btw sorry about the other questions) how can it ignore the signal ?
e.g: number_aux = 53 -> this will be: Number of digits: 2
Media = (5 +3) / 2 = 4
( 2 < 4 ) then return false. now i'd like to find a way to insert -53 (negative) and the output must be the same (false) ignoring de signal "-"
here is my code:
In this code if u inserted a negative ( -6 or -53) the output is always true because e takes in mind the signal . How do i tell him to ignore it?
    System.out.println....
      int number _aux =Integer.parseInt(... ....etc
                                          int sum = 0;
          int count = 0;
          int media;
          while (number_aux != 0){
          int digit = number_aux % 10;
          number_aux /= 10;
          sum += digit;
          if(number_aux >= 0) count++;
          media =(int) (sum / count);
          return (count > media);thank you so much.
Josh

I already used my brain LOLO , if new the answer i
would not be here ask for help lol.
shiver You forgot to add three or more exclamation marks.
give me a hint , how to ignore the signal without
that method ( using my code)If I'd give you any number, how would you do it? What would there conditions and formula be? Think about that. Programming isn't magic. It's finding a step-wise solution to a problem and writing it down.

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add a custom button in WD screen to call a workflow in siebel?

Hi All,
We have a requirement to have a custom button at the summary screen(after the rule execution) "Create Opportunity", on clicking on it a new opportunity record should be created in Siebel. As we know the "Save" link calls "PolicyAutomationSaveSession" inbound web service method and saves the information in session table and we can modify the PreSession and PostSession workflows. But we are not sure how it calls the service method and where is the mapping defined.
Can you please help me on how to add a custom button and how to invoke a workflow in siebel side to implement this requirement?
Also is there any document which can help me to add a custom button in screen and to add the code behind the button?
Thanks in advance!!
Regards,
Subhradeep

Subhradeep,
Closing a Web Determinations window is essentially the same as closing any HTML window. It involves javascript, which you would have to add to the Web Determinations templates.
Essentially the javascript command to close a window is {{window.close}} or {{top.close}}
For timing, you might be able to use the setTimeout function of Javascript (see: http://www.w3schools.com/jsref/met_win_settimeout.asp)
At the risk of exposing exactly how bad my javascript skills are, I have attached a super-simple html fragment, a page that closes itself after 3 seconds. It may help you get started in the right direction. In general closing a window is a fairly dubious activity and is often not permitted by certain browsers. This html page at least works in Internet Explorer.
<html>
     <head>
     <script language="JavaScript">
          setTimeout(closeMe, 3000);
          function closeMe() {
               alert("This window will close");
               top.close();
     </script>
     </head>
     <body><B>This window will close in three seconds</B></body>
</html>
{code}

[Multisim]How to import data files into Multisim?

Hi guys,
In Multisim, we can plot various kinds of graphs, which again can be export to data files like *.csv. I have a csv file, which contains data in X and Y axes. How can I import this data file into Multisim, and make it displayed in a graph?
Thanks in advance.

Hi,
The Piecewise linear source (PWL) accepts data as voltage or current vs. time. You can find this part by selecting Place>>Component, go to the "Sources" group then select "Signal voltage sources". Place this part on the work area, double-click on it and there should be an option to open a .txt file.
Tien P.
National Instruments

How to add an Infotype to an exsting Infoset (ad hoc query)

Hi,
How to add an Infotype (Ex. 0025) to an exsting Infoset (ad hoc query)?
I was trying by clicking on 'Extras' tab & create...I get three options, create field, create table or create structure.
I am not sure which to use or is there any other way? Pls. let me know the steps...
Also what is this 'Package', which is aked whenever you create or change an Infoset.
Pls. suggest.
Tnx
SKR

I was able to add the infotype by adding the table as PA0025 & include all the fields in the field group.
When I check, I get the following error:
"Access to PA0025 with sequence no. 01"
Message Text
Access to PA0025 with sequence number 01
Technical data
Message type__________ W (Warning)
Message class_________ AQ (Message texts for SAP Query)
Message number________ 006
Message variable 1____ Access to PA0025 with sequence number 01
Message variable 2____
Message variable 3____
Message variable 4____
Message attributes
Level of detail_______ 4 (Level of detail 4)
Problem class_________ 3 (medium)
Sort criterion________
Number________________ 1
Do we need to input the sequence no. as 00? or is their anything else that I have to maintain?
Tnx
SKR

How to add three signals in multisim to make a resultant

Similar Messages

Maybe you are looking for