How to add toolbar to TableViewController with IB?

I am trying to figure out Interface Builder, and want to add a toolbar to be displayed in a navigation-based project. This is what I did, but what am I missing?
1) I added IBOutlet UIToolbar *toolbar; to RootViewController.h with properties and systhesize.
2) I added a toolbar to the RootViewController IB document.
3) In IB I connected toolbar IBOutlet object to Toolbar in Outlets.
4) I can't figure how to alloc and init object. I have tried a few things but nothing shows up. Any help would be appreciated.
Thanks,
Bri

Ok I see that if I add the toolbar view as a subview of the table view, I can't see the toolbar. I can get it to show up if I add it to the main window, but then the navigation controller cannot push and pop entire view, and I will have to figure out when navigation controller pushes and pops and will have to add and remove subview manually. There has to be a better way?
I thought I got it to work, by adding a [self.view addSubview:toolbar], but it adds it to the actual table view, so it moves with the cells. How can I make it like the Navigation Bar?
Note I read the View Controller Guide and Table View Guide, but it does not mention toolbars or subviews.
Brian

Similar Messages

How to add toolbar.

I would like to know how to add the toolbar that the adobe website has where you can bold text a spell check? Also can i customize the amount of options in the toolbar?

Ok I see that if I add the toolbar view as a subview of the table view, I can't see the toolbar. I can get it to show up if I add it to the main window, but then the navigation controller cannot push and pop entire view, and I will have to figure out when navigation controller pushes and pops and will have to add and remove subview manually. There has to be a better way?
I thought I got it to work, by adding a [self.view addSubview:toolbar], but it adds it to the actual table view, so it moves with the cells. How can I make it like the Navigation Bar?
Note I read the View Controller Guide and Table View Guide, but it does not mention toolbars or subviews.
Brian

How to add a bing map with pins to a Siena Project

Hi
I just want to add a bing map with the current location and a few nice pins of some nice locations around me. Comming out of a Excel file. Potentially also draw some routing lines into the bing maps.
Any ideas how I can accomplish that goal?
Thank you in advance
wbr.
Joerg

yes you can (there is actaully one on the map, blue square)
The syntax is listed on
http://msdn.microsoft.com/en-us/library/ff701724.aspx
You will however have to build the correct string to included in the image source (which you can do in the source excel or in runtime in siena)
Concatenate is suitable to do that.
http://dev.virtualearth.net/REST/v1/Imagery/Map/Road?pp=47.638197,-122.131378;;1&ms=350,500&key=KEYHERE
the PP indicates the pin actually and the bing map autocenters on that. You have several options listed on the webpage listed above. It's a question of the one fitting you best.
Please note that your bing key is yours so you need to hide it well enough.
Regards
StonyArc

[SOLVED] How to add modules to build with the kernel?

Hello i´m trying to learn how to build my own custom kernel and doing it the arch way https://wiki.archlinux.org/index.php/Ke … raditional. But unfortunately dm-crypt was not included in the kernel so it all failed.
svart_alg% sudo mkinitcpio -k 3.15.6 -c /etc/mkinitcpio.conf -g /boot/initramfs-test.img
==> Starting build: 3.15.6
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [lvm2]
==> ERROR: module not found: ‘dm-snapshot’
-> Running build hook: [encrypt]
==> ERROR: module not found: ‘dm-crypt’
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> WARNING: No modules were added to the image. This is probably not what you want.
==> Creating gzip initcpio image: /boot/initramfs-test.img
==> WARNING: errors were encountered during the build. The image may not be complete.
I have never don any of this before and have no idea of how to add a missing module to the kernel i´m building. So i search on internet and had a very hard time finding a good guide for this but i fond one possible solution. https://www.kernel.org/doc/Documentatio … odules.txt
svart_alg% make -C /home/nigro_alko/Kernel/linux-3.15.6 M=/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in
make: Entering directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
mkdir: cannot create directory ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’: Not a directory
scripts/Makefile.build:44: /home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile: Not a directory
make[1]: *** No rule to make target ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile’. Stop.
Makefile:1310: recipe for target ‘_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’ failed
make: *** [_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in] Error 2
make: Leaving directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
So is there any one that have time to help a lost little newbie i would bee very happy :-)
Last edited by Moosey_Linux (2014-07-29 15:00:40)

karol wrote:Why do you want a custom kernel in the first place?
Moosey_Linux wrote:i´m trying to learn how to build my own custom kernel
Reason enough IMO. But anyway... you refer to the Traditional build method in the wiki, but is it possible you didn't really read it? Or maybe you only skimmed it? Did you run make menuconfig? Did you try to build everything in instead of using modules? That mkinitcpio output suggests that you did.
As suggested there for first-timers, it's a good idea to start with a kernel configuration that is known to work - the Arch config is the obvious choice, but there are other sources e.g. http://kernel-seeds.org/ .

How to add '%' to a query with bind variables

Hi,
I am using oracle jdeveloper 11g.
I am trying to create a table to display rows using the below query in a jspx page,
select * from ade_txns where series='WORKPLACE_PT.11.1.1.8.0_GENERIC' and transaction like 'rkumara%'
I am using a view with query and binding variables as below,
select * from ade_txns where series= :p_series and transaction like :p_QAEngineer
I will be passing p_QAEngineer using binding variable using 'ExecuteWithParams' using a dropdown(eg: 'rkumara'). But I need to add a '%' to this value as I am using a 'LIKE' clause in my query.
I tried using,
select * from ade_txns where series= :p_series and transaction like :p_QAEngineer+'%'
But this is not working for me.
Can someone please tell me how i can solve this.
Thanks,
Ranjeet

does this help also?
How to add regular expression in viewobject bind variables
~Abhijit

How to add one column value with grand total

hi,
this is my perform.i am just here multipling menge and gpres value and stores into G_total variable and displing into output.
this is my output in main window.
ex:mat. 1           77.00(g_total value)
    mat 2             55.00(g_total value)
now the requirement is to add the column and display the output as grand total ex: 77.00 +55.00 = 132.00
how to do the syntax please help me......???
FORM get_total TABLES   in_tab STRUCTURE itcsy
                          out_tab STRUCTURE itcsy.
DATA: lv_menge(20),
        lv_gpreis(20),
        g_total(20),
        g_total1(20).
DATA:lc1 TYPE string,
       lc2 TYPE string,
      ls_tab      TYPE itcsy,
     l_tabix        TYPE sy-tabix.
READ TABLE in_tab WITH KEY name = 'RESBD-MENGE'.
IF sy-subrc EQ 0.
    lv_menge = in_tab-value.
ENDIF.
READ TABLE in_tab WITH KEY name = 'RESBD-GPREIS'.
IF sy-subrc EQ 0.
    lv_gpreis = in_tab-value.
ENDIF.
REPLACE ',' INTO lv_gpreis WITH ''.
CONDENSE lv_gpreis NO-GAPS.
READ TABLE out_tab WITH KEY name = 'G_TOTAL'.
IF sy-subrc EQ 0.
    g_total = lv_menge * lv_gpreis.
    out_tab-value = g_total.
    CONDENSE g_total.
    lc1 = g_total+0(2).
    lc2 = g_total+2(3).
    CONCATENATE lc1 lc2 INTO g_total SEPARATED BY ','.
    out_tab-value = g_total.
CLEAR ls_tab.
    LOOP AT out_tab INTO ls_tab.
      l_tabix = sy-tabix.
      CASE ls_tab-name.
        WHEN 'G_TOTAL'.
          ls_tab-value = G_TOTAL.
      MODIFY out_tab FROM ls_tab INDEX l_tabix.
ENDCASE.
    ENDLOOP.

>
asissahu wrote:
> hi.
>
> nobody is replying my question???
>
> please help me
Hi, Asissahu
Because may be some one have problem to read your code
Please have a look at the following link and past code this way.
[How to post code in SCN|How to post code in SCN, and some things NOT to do...;
@Naga Please you too
Regards,
Faisal

How to add attribute to Element with SAX

Hi,
I'm parsing XML document with SAX using DefaultHandler.
How can I add attribute to start tag?

Is this right????????????Yes, it's right. Everything everybody except you has said in this thread has been right.

How to add a provisioning profile with iTunes 11?

Hi, I don't manage to add a provisioning profile and all I have found is that video, that is, after a 10 min try, not applicable with iTunes 11.1, that I use.
http://www.youtube.com/watch?v=jxBQItCjoro
Please help me,
Pierrickos

OT, A very helpful answer above. Thanks.
I would like to ask you one more question, not related to this thread:
I have been trying to sign in to my normal Apple ID but have been failing with the following error message:
We're sorry. Your account could not be created due to system issues.
Please contact Apple Support Communities with the information below to create your account.
I called Apple Care and they said that they could not help me. I asked where I could go. They said they did not know. I tried that same Apple Care login ID on iTunes, and the Apple Store without a problem. I then created a new login ID and have been able to sign in to the Apple Support Communities and hence this thread. I would like to be able to go back to my original account; however, I am being blocked as you can see.
How can I get help with my issue.
Thank you for your assisstance.
Regards,
Ken

How to add toolbar of buttons in APEX !!!!

Hi Everyone,
Can we add button toolbar in APEX as we used to add in Oracle Forms 10g like Enter Query, Execute Query buttons? If yes then how we can add it and where we will add trigger?
Thanks in advance,
Yousuf.

Hi Rohit,
Unfortunately, there is no configuration which allows having the actual total work in "my tasks" page. Note that you have the total for the period for each assignment in the column next to the "work" column. In case it doesn't suit
your need, I'd suggest to propose for example a simple report, otherwise a development could be quite complex and time consuming.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to add a dynamic parameter with VB 6?

I'm building a simply application that will open crystal 11 reports and add a single parameter. I've been able to get this working however I don't know how to set the parameter as dynamic and add to the list of values?

Hi Jason,
Please search Forums before posting a question. There are others doing the same whcih include samples on how to. Here's one of them: Loading a prompt list dynamically on an ASP.NET page in Crystal 11
I assume you are using the RDC ( craxdrt.dll ). The RDC has been deprecated since version 9 meaning there have been no updated or new fucntionality added to it. Since Cascading Parameters were introduced in CR 11 the RDC has no API available and nor does the .NET components. Check the posting above for more info.
Also the RDC is not supported in .NET so you should upgrade CR and move to .NET Suite.
Thank you
Don

How to add the text box with background color in Acrobat 9 Pro ? (Urgent)

I have previously used the Callout tool to add the comments in a PDF file, but the comments were difficult to read as some of them were mixed with the pictures just shown below. Therefore , I hope that there's a tool that can create the box with background color, but I cannot find such tool. What should I do ? Hope to get the answer ASAP, as it's very urgent !
P.S. The picture below is represent the problem: the comment are difficult to read.

In the properties of the callout comment you can change the fill color.

How to add a list box with values for a ztable in SM30

Hello Gurus,
I had created a table maintenance for Ztable and added many extra functionality to that. Now i would like to add a list box or check table for a field. Can i do that with out Regenerating my table maintenance. Please help me its..very urgent.

Have referred this domain to the data element, this should be the Field type in ur table for the particular field.
Eg: <b>SE11 > table name > fields-ZTEST > fieldtype-ZZTEST</b>
ZZTEST in the data element > create a domain for this data element and in that specify teh value range.
Save and activate it.
Make sure that u regenerate teh table maintenance generator else u cant see the changes.
Now if u press F4 u can see only thevalues specified, also u will see only the list box with values in SM30.
Try this,please let me know if u face any difficulties.

How to add X-authenticated header with SMTP-auth

I have smtp-auth working here. I also have normal mail header to see what ip the message is coming from. But I'd like to add X-authenticated to signature the mail is authenticated by end user.
Can I do that? What parameter i can use for message filter?
Many thanks.
Chris

Currently you can't ; however, you should open a case with IronPort and request that feature - the more that request the feature the better the chance for it to get implemented. My company has already requested this feature. We asked for a variable and a condition that we could use in filters.

How to add Footage to existing With different Pixel aspext ratios and/or frame rate?

Can someone help me? I am working on a project. I shot footage with my Canon XA10 and with my DSLR. I want to put footage in my film from both. What is correct way to add both of these in one film so it looks correct. Aspect and frame rates are different for both.
I have tried making a new sequence with correct aspect ratio and then adding that sequence to project but it is still not correct. Hope I am making sense!
thank you!
kim

Don't bother. PR is fully capable of handling that for you. Take a look at PPBM5 Benchmark
The test timelines contain PAL and NTSC material, DV, HDV, AVCHD and in the new version even XF 422 material, all in a single timeline.

How to add chapter id (J_1ICHID) with material desc. in SCRIPT J_1I_ARE1

Please guide me how to enter chapter id with Description of goods in stantard script J_1I_ARE1 ? i have copied the script into Z .

mountreal wrote:
Happy New YearYou too!

How to add toolbar to TableViewController with IB?

Similar Messages

Maybe you are looking for