How to adjust the playhead frame by frame instead of bar and beat?

I'm doing the dubbing in Logic Pro 9.1.1, the video is 24 frame per second.
The playhead always moves by bar and beat, not frame by frame when I use Euphonix MC Control shuttle/jog wheel.
Is there any way to adjust the playhead frame by frame?

In your *Key Commands List* (option-K) you will find the commands *Rewind one frame* and *Forward one frame* - just assign keycombo's to those two commands.

Similar Messages

How to set the Codec, Frame rate, Bit rate, and Resolution for iMovie 10.0.5

To upload a video to Vimeo, I need to be able to set the codec, frame rate, bit rate and resolution to make sure the file is compressed to under 500 MB. Where in iMovie 10.0.5 am I given the option to adjust these settings?
Thank you!

Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
Thanks.

How to adjust terminal/console frame width

Hi folks,
Archlinux 86-64 2007-08-2
I have 20" wide LCD screen. How to adjust the window frame size of terminal/console allowing typing to its end rather than after typing a few words the cursor jumps to the beginning overtyping the same line? TIA
B.R.
satimis

Misfit138 wrote:I'm going to take a guess here, based on what you wrote.. I think what you are describing might be either a problem with your video card/framebuffer driver, or, you may have modified your PS1 prompt incorrectly.
Did you modify your PS1?
Hi,
Yes, PS1 is what I need. Previously I searched on wrong terms.
After commenting out "PS1='[\u@\h \W]\$ ' " I added follows;
BLUE=`tput setf 1`
GREEN=`tput setf 2`
CYAN=`tput setf 3`
RED=`tput setf 4`
MAGENTA=`tput setf 5`
YELLOW=`tput setf 6`
WHITE=`tput setf 7`
PS1='\[$GREEN\]\u@\h \[$BLUE\]\w/\[$GREEN\] \$\[$WHITE\] '
That is what I need to display on terminal/console.
However I still can't manage to have "black" fore-ground (black characters on typing). I played around on following variation without result.
BLUE=`tput setf 1`
GREEN=`tput setf 2`
CYAN=`tput setf 3`
RED=`tput setf 4`
MAGENTA=`tput setf 5`
YELLOW=`tput setf 6`
WHITE=`tput setf 7`
BLACK=`tput setf 8`
PS1='\[$GREEN\]\u@\h \[$BLUE\]\w/\[$GREEN\] \$\[$BLACK\] '
BLACK=`tput setf 1`
GREEN=`tput setf 2`
CYAN=`tput setf 3`
RED=`tput setf 4`
MAGENTA=`tput setf 5`
YELLOW=`tput setf 6`
WHITE=`tput setf 7`
PS1='\[$GREEN\]\u@\h \[$BLUE\]\w/\[$GREEN\] \$\[$BLACK\] '
Advice would be appreciated. TIA
Besides how to change the colour on "nano"? The characters are difficult to read on typing. I need black characters on white background
satimis

How do you measure a Cycle's lenght in time, not bars and beats?

How to you measure the time length on a selected cycle ? I understand that when any cycle is selected, you can see the length of that specific range on Bars and beats, but not in Real time. How do I get to see ( Calculate ) the real time length of a cycle range? When working with video this feature is absolutely necessary. ProTools shows you the length in time when a cycle range is selected. I also know that you can calculate the distance of any given point in the song, relative to the start time, you can see it in the Time Position display, but what If I need a more exact time calculation ( min:sec:frames, etc. ) between two specific cue points that are only relevant to video sync, not relative to the start time and not relative to musical values. Like if I need the exact time length for a video cue, etc.

Thank you, very Much, That's it !!!
I've looked for that for years...LOL, It never occurred to me to look for a "negative",
Awesome
J

How to change the picture frame size in Lightroom 5 Book

I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative. Appreciate any ideas

Hi again Tony,
I have been using Adobe Photoshop 7, Photoshop Elements, Perfect Photo Suite, Photo Studio, etc., changing Image size, placing a picture on a page and then, do a simple last minute size adjustment by using the arrows to stretch or shrink it in place. Things would be a lot simpler if I could do the same thing with the cells in Lightroom 5. Cell pad adjustments do not fill the bill.
I think we’ve pretty much concluded this exchange. Thanks again for your effort.
david
ay [email protected]
Sent: Wednesday, March 12, 2014 11:27 PM
To: dgbrow
Subject: How to change the picture frame size in Lightroom 5 Book
Re: How to change the picture frame size in Lightroom 5 Book
created by Tony Jay <http://forums.adobe.com/people/Tony+Jay> in Photoshop Lightroom - View the full discussion <http://forums.adobe.com/message/6205206#6205206

How to access the Text Frame, when we use scrollable frame,

Hi Friends,
How to access the Text Frame, when we use scrollable frame,
Thank you,
[ Nav ]

That's the same question:
how can I access something (a page item) on a page…
Answer: you need something unique in that object you can get a handle on.
Or you use the selection a user of your script is doing and work with that selection…
A "scrollable frame" is nothing special. What it makes it a "scrollable frame" is the DPS software.
So you have to look for attached labels on the object, that identify the object for the PDS plug-in "Overlay Creator" as a "scrollable frame". That's possible with the "extractLabel("KeyString")" function. But you need to know the appropriate key-string in advance.
In another of your thread in the DPS forum, I basically answered the question how to obtain those key-strings.
When knowing the key-string you could loop through all your page items (you can skip all text frames) in the allPageItems-collection, to identify the "scrollable frame" by extracting the right label.
If you have more than one "scollable frames" you need a second unique identifier for the particular object.
That could be nearly any property.
Keep in mind, there is no "scrollableFrames" collection in the DOM !
Uwe

How to realize the internal frame as in Swing?

How to realize the internal frame as in Swing? JavaFX has the similar function?

For system tray in JavaFX 2.2, you need to use AWT, see =>
Re: How to call Stage’s show/hide methods from AWT-thread
http://docs.oracle.com/javase/tutorial/uiswing/misc/systemtray.html
awt - JavaFX app in System Tray - Stack Overflow

Pages - How to remove the grey frame?

Hi!
I am wondering how to remove the grey frame around the page so that when you print the page there won't be white borders around the page?
Thanks!

The grey border is probably the part the printer can't print on. It can be deselected in View > Hide layout. No matter what it will be white paper when you print.
To not get white paper you need to be able to print borderless and you need to have images and text al the way out to the edge.

How to adjust the path of a tween using actionscript

I'm a novice at Actionscript3 and would greatly appreciate an answer to what seems like a simple question:
Here's my project:
http://home.comcast.net/~samiri/director/mortals/amadoFlashPortrait/index.htm
Click on the gray scale frame images. A larger version of that image tweens out along the z axis. However it comes from 'somewhere else' not from 'within the frame.' How do I get the each larger gray scale frame image to look like it comes directly from the place where the user clicks (not to one side or the other)?
So I guess what I'm asking is how to adjust the path of the tween along the x and y axis using the actionscript code (below).
My method:
I'm using this line of code in my script:
var myTween:Tween = new Tween(mdImg, "z", Strong.easeOut, 300, 0, 1, true);
"mdImg" is the variable that holds the name of the hotspot clicked upon by the user.
I have the larger (faded edge) image positioned directly on top of the frame image and just kept invisible until the User clicks on the hotspot over the frame image.
Thanks much.

Thanks moccamaximum,
By "do your tweens manually" you mean to use the timeline to do frame-based tweening? That is an option but I'm wondering (as a newbie): Isn't it better to use actionscript to do animation since you have more control and it's time based rather than frame-rate based (and works better on low performance machines)? Just curious if I should be spending the time to learn actionscript or do it in the traditional way.
Thanks

How to adjust the height of the tracks in timeline mode

I am trying to find my way around PE 10, have had the program for years but not used it. (I am using Win 7 on a 15" laptop, screen resolution is 1920x1080, 16 GB Ram, 4GB video RAM.) I took some video on vacation, in some clips there is a lot of wind noise. I know how to adjust the volume using key frames, but the tracks are only about ¼" wide making adjustment just about impossible. Full volume to zero is just a small fraction of an inch. I can zoom in on the track, but this doesn't make the track wider. Is there any way to do this?
Thanks,
David

Actually, I wanted to do this in a static table.
Just now, I learnt that this feature is not available in 12.0 as well as in other previous versions.
However, this will be implemented in Release 12.1.
Thanks,
Navin.

How to adjust the Fonts to fit the component

The size of the text is much smaller than the size of the button. But when I put the letters onto the button, they are not properly shown. Instead of showing the whole letters, they become "..." on the button. I can not see them at all unless I make the window/frame to its full size.
How to adjust the Fonts or the properties of the components?
Thanks.

The best way is to use a layout manager, so that your component is laid out automatically to fit.
If you really want to adjust the font size according to the size of the component, you would have to first retrieve the FontMatrix for your font, calculate the width of a particular string of text and see if it fits the component. However, why do that if you don't need to?

How to adjust the brightness of a second display connected to iMAC 2012 by Apple Mini DisplayPort to Dual-Link DVI Adapter?

How to adjust the brightness of a second display (Dell 3007WFPHC 2560x1600 dpi) connected to 27 inch iMAC 2012 through thunderbolt port by an Apple Mini Display Port to Dual-Link DVI Adapter?

Macs control computer by USB. With a non-Apple display, you will have to use the brightness control on the display.

How to adjust the size of a region?

Hello, would anyone know how to adjust the size of a region size?
Thanks for your replies!

Checkout an interesting article called " Oracle9iAS Portal Best Practices: Regions" to understand resizing region.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_REGIONS_0.HTML

How to adjust the font size of iPad in printing a web page.

How to adjust the font size of iPad printout of web pages ?

In HTML Header I put textDid you mean Page Header Text? It wouldn't have done much of anything at all in the HTML Header...
However, the font doesn't do anything.Yet another universal selector problem: see +{message:id=4184109}+
How do I overwrite the style sheet? I am wondering if I change the default style sheet, does that also affect the other pages, which is not what I want. In that case you can just include the CSS inline, which will also get round the universal selector issue. You are also recommended to use a semantic HTML element instead of deprecated presentational elements like <center> and <font>. Assuming this text is the primary heading on the page, use <h1>:
<img src="#WORKSPACE_IMAGES#my_header_logo_white.jpg" alt="" title="Application" />
<h1 style="font-size: large; font-weight: bold; text-align: center;">Web Management System</h1>

At the time of go-live, how to adjust the stock in the bins which match- -

Hello,
Materials are already distributed in to the bins physically where SAP WH mgt not implemented. When we implement the SAP/(at the time of go-live),we have following issues
When we go live, then how to adjust the stock in the system as per actual physical bin stocks in WMS?
OR
DO we have to tell user to adjust the stock in the bins physically as per the system stock?
Thanks

hi,
your stock level get differed between storage level and warehouse level? if so go to LX23 AND EQUAL THE DIFFERENCE.
if u want to change the bin level adjustment use lt01 and lt10 tran. as per your req(at the time of go live) adjust according your inventory stock.
regards
muthuraman.d
Edited by: muthuraman d on Dec 16, 2009 8:59 AM

How to adjust the playhead frame by frame instead of bar and beat?

Similar Messages

Maybe you are looking for