How to allow receive e-mail by IP address

Hi all
I have question about how to receive e-mail.
We are using Mac OS X Server, is running Postfix mail service. This e-mail server is only for receive e-mail. And we will not create domain name for this. Is it possible sent e-mail to this server from outside? Suppost the WAN IP of this server is 200.200.200.200 and user name is admin. Can i sent e-mail to [email protected] ? Does postfix success get it? I have tried before, but it displays "Illegal address syntax" error message.
Thanks
Philip
Apple X Server   Mac OS X (10.4.7)  

hi,
from /etc/postfix/main.cf:
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
check postconf -n |grep inet_interfaces

Similar Messages

  • How to send/receive e-mails with sql or pl/sql

    Hello,
    I must send and receive e-mail (something like e-mail client) done with oracle database and oracle forms.
    How can I receive e-mails with SQL? Is there any way?
    I read threads about using utl_smtp but i could not send an e-mail. May be I need to use servers without password?
    Best regards
    P.S. I'm using Forms 10g R2 and database 9i

    Hi,
    try below code.
    change mailhost ip to u r mail server ip.
    CREATE or REPLACE PROCEDURE SimpleTextMessage IS
    mailHOST VARCHAR2(64) := '192.168.0.21';
    mailFROM VARCHAR2(64);
    mailTO VARCHAR2(64);
    mailCONN utl_smtp.connection;
    mailDATE VARCHAR2(20);
    vreply utl_smtp.reply;
    vreplies utl_smtp.replies;
    i number;
    BEGIN
    mailFROM := '[email protected]';
    mailTO := '[email protected]';
    SELECT TO_CHAR(SYSDATE,'MM/DD/YYYY HH24:MI:SS') INTO mailDATE FROM dual;
    vreply := utl_smtp.open_connection(mailHOST, 25, mailCONN);
    vreplies := utl_smtp.help(mailCONN, 'HELP');
    for i in 1..vreplies.count loop
    dbms_output.put_line( 'text = ' || vreplies(i).text );
    end loop;
    vreplies := utl_smtp.ehlo(mailCONN, mailHOST);
    for i in 1..vreplies.count loop
    dbms_output.put_line( 'text = ' || vreplies(i).text );
    end loop;
    vreply := utl_smtp.mail(mailCONN, mailFROM);
    vreply := utl_smtp.rcpt(mailCONN, mailTO);
    vreply := utl_smtp.open_data(mailCONN);
    utl_smtp.write_data(mailCONN, 'Subject: '|| 'Hi' || chr(13));
    utl_smtp.write_data(mailCONN, 'From: '||mailFROM || chr(13));
    utl_smtp.write_data(mailCONN, 'Date: '||mailDATE || chr(13));
    utl_smtp.write_data(mailCONN, 'To: '||mailTO || chr(13));
    utl_smtp.write_data(mailCONN, 'CC: '||mailFROM || chr(13));
    utl_smtp.write_data(mailCONN, chr(13));
    utl_smtp.write_data(mailCONN, 'Hello Friend how r u.' || chr(13));
    vreply := utl_smtp.close_data(mailCONN);
    END;
    /

  • How i can receive icloud mail if my icloud email disabled from apple?

    How i can receive icloud mail if my icloud email disabled from apple?
    please help
    thanks

    If Apple has disabled or deactivated your e-mail account, then you will not be able to use it. Did Apple tell you why it was disabled?
    If you don't know why Apple disabled it, you'll need to contact Apple Support to find out why.
    Apple Support
    http://www.apple.com/support/

  • How to stop receiving e-mails from the Adobe Forums?

    After the recent upgrade to the Adobe Forums you may notice that you are receiving additional e-mail messages from the Adobe Forums.
    To turn off e-mail notifications please complete the following steps:
    Go to https://forums.adobe.com/welcome
    Click on your Avatar and choose the Preference option
    Alternately you can click on https://forums.adobe.com/user-preferences!input.jspa to access your Preferences.
    Under the General Preferences you can adjust your e-mail preferences.  You can choose which type of notifications you wish to receive e-mail notifications for.  I would recommend disabling the e-mail regarding Moderation Notifications
    Once your selection has been made then click the Save button to apply the settings change.

    What does “I cannot export or copy and paste or drag the mail over” mean?
    Mail stores most preferences and all account settings in ~/Library/Preferences/com.apple.mail.plist (except the passwords, which are stored in the keychain). Everything else, including all your messages and mailboxes, is stored within the ~/Library/Mail/ folder.
    Similarly, Address Book stores the settings in ~/Library/Preferences/com.apple.AddressBook.plist and the data in ~/Library/Application Support/AddresBook/.
    Other applications store preferences and data in other places. You may want to ask in the appropriate forums for more information on those.
    If both computers are running the same major version of Mac OS X, copying these files & folders from one computer to the other is all you need to do in order to have an exact copy of all your data on both computers.
    In order to avoid potential permission issues, copy the files operating on the destination computer and while logged in as the user that’s going to use them. Also, be sure the affected applications aren’t running on either computer while doing that.
    Alternatively, you may use Migration Assistant, as Michael suggested:
    Transferring data with Setup Assistant / Migration Assistant FAQ
    And you may want to read the following articles as well:
    Transferring files between two Macintosh computers
    How to back up and restore your important Mac OS X 10.4 files
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

  • TS3899 How do i receive e-mail on the i-Pod, switched to AT & T u-verse.

    I switched to AT&T u-verse from AT&T dsl. All my other devices are fine (for now); however, I cannot send or receive e-mail on my I-pod touch.  I may have the wrong incoming and outgoing mail server names wrong.

    Google for: setup mail for AT&T u-verse on iphone
    and the follow the instructions.

  • How can I receive e-mail through a different computer?

    I would like to be able to receive my Thunderbird e-mail on a different computer. How do I set that up?

    There is no such thing as Thunderbird email. You get your email from your email provider. Most providers have a webmail interface where can go there on the Internet with a browser. Use your provider's webmail interface when away from your own computer.

  • How to I receive e-mails with music

    I will receive an e-mail that has music attached.  The music goes into i-tunes I click on i-tunes and I hear the music, but how to I view the e-mail and hear the music when I open the e-mail..
    If I forwrd one of these e-mails, the receiver, does not get any music...Help
    thanks.

    Hi Jean,
    Some poviders won't pass music files or files over a certain size, but in Mail, but in Mail & viewing that, is there on the right that says Attachments, or Save?

  • How can I copy a mailing list into address book without having to type them individualy

    Hi
    I have a mailing list and I would like to send emails to everyone on the list in one go, I copied and pasted the list into my email, but can I have this group somewhere so that I can just call it up like an ordinary address from the address book, preferably without having to type every name individualy into the address book. I tried making a group in the address book and pasting the list in without success,if this is possible can some explain how I can acheive this
    Thankyou
    Richard

    Richard,
    Unfortunately, you have to add them one at a time - wait a sec... oh, yeah, if the contact is in your contact list it will 'auto-fill' as you begin to type. So if I want Wendy Whatshername, all I have to do is type Wen and the contacts will show up for you to select and auto-fill the name and email address.
    Hope this helps,
    Clinton

  • Not receiving e-mail from certain addresses

    I've never had this problem before, but I'm not receiving any emails that come from the community college e-mail system where my husband works. I used to receive them, but today, three different people tried to send me an e-mail from the same place, and I didn't receive them. They aren't in my spam folder. What else should I check? Thank you. The e-mail addresses are from [email protected] Thanks!

    Comcast Security Assurance should be able to help you with this. Call them at 1-888-565-4329 (from http://constantguard.comcast.net/dedicated-support/). Note that this is NOT one of the regular customer service numbers.
    The first-line reps there are sometimes not very helpful. If so, be persistent, and keep at them until you get a satisfactory answer.

  • How can I receive email delivery receipts or read receipts on Mail, OS X?

    How can I receive email delivery receipts or read receipts on Mail, OS X?
    Thanks!

    See here: http://email.about.com/od/macosxmailtips/qt/et_request_recp.htm
    Not sure if it works in Mountain Lion.
    Note that those only work if your recipients have allowed it to happen.
    Also, Mail will not respond to them at all.

  • How do I rebuild a new Mail account? (recipients not receiving e-mails)

    For the last few days, various e-mails I have sent have not reached their recipients when I send them from my Mail application. There is no pattern to whom is and is not receiving e-mails I have sent. All messages show as being Sent and I receive no bounce-back error messages. Some recipients receive e-mails days later, some all the time, some not at all. If I send e-mails using other applications on other computers, including online apps, all e-mails are received successfully by their recipients.
    So, I have determined through the process of elimination (after speaking with my internet provider and Apple support) that I need to rebuild my Mail account (I've created a "test" account and the problem is fixed — everyone across the board is receiving my e-mails fine). There seems to be no idea as to what could be causing the problem, but I am hopeful that at least I know that building a new account can remedy it.
    The obvious question — how to I delete my old account and create a new one without losing all of my current Inbox e-mails, customized mailboxes, smart mailboxes etc. I have no doubt this process has been outlined somewhere on this forum but after some searching I haven't found anything. If someone could point me to a previous thread, I'd greatly appreciate it.
    And, out of curiosity, if anyone has any idea what could have caused this (Apple Support and Internet Provider tech support both stymied) to happen, I would be interested to know!
    Thanks in advance for anyone's time.

    Hi Deirdre, and a warm welcome to the forums!
    For safety...
    First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist
    Is this bad account IMAP or POP?
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup

  • HT4859 After the i-cloud server issue Nov 26, 2012, I had to change some mail account settings to get my i-cloud mail to work again.  However, all of my received e-mails are gone.  How do I retrieve my e-mails from the server?

    After the i-cloud server issue yesterday, November 26, 2012, my i-cloud mail account on my Macbook Pro stopped receiving mail.  I changed some mail account settings to fix the issue, and was able to start receiving e-mails.  However, all of my historical e-mails are gone.  How do I retrieve all of my old e-mails from the server?

    What settings did you change, what were the changes, have you visited www.icloud.com to see what mail is actually there? and do you have a backup?

  • When I receive and answer e-mail, the correspondence is usually "nested" with the original message, and the number of replies, etc. are indicated with a number next to the original message.  How can I change the mail settings so that every reply is listed

    When I receive and answer e-mail, the correspondence is usually "nested" "behind"  the original message, and the number of replies, etc. are indicated with a number next to the original message in the inbox.  How can I change the mail settings so that every reply is listed individually in the inbox instead of having them "stacked" behind the original message.  I'm afraid I might accidentially overlook messages the way they are handled now.

    Somebody here will correct me if I'm wrong, but what you have to do is go into Settings, Mail/Contacts/Calendars and under Mail, turn off "Organize by Thread".  I think that will make each message show individually.

  • I can no longer receive e-mail messages through my @mac/@me account. I can still send e-mail messages, though. I believe there may have been recent attempts to hack into my account. I have changed my password, but wonder how to start receiving mail again?

    I can no longer receive e-mail messages through my @mac/@me account, though I still seem to be able to send messages. I believe there may have been recent attempts to hack into my Mail account (my LinkedIn and Facebook accounts were both hacked three days ago and a scam/phishing message sent to my contacts, and I know there was at least an attempt made to hack into one of my e-mail accounts). I have already changed my Apple password, but how do I start receiving mail again?
    (And I should also say that I'm a little surprised there was no alert from Apple of suspicious activity on my account, if such was the case. Instead, when I logged into my account via Mobile Me three days ago I noticed that all messages in my inbox were gone as well as all of my contacts. I assume this was related to the current problem.)
    Thanks for all responses.

    The problem has been solved with the help of a MobileMe online counsellor. My MobileMe account had in fact been hacked into and the fraudster had been redirecting my e-mail messages to a phony account that he controlled. We took the forward off and reset all my passwords and security questions, which solved the immediate problem.
    Thx.

  • How to find out why we don't receive e-mail from a deployed application?

    Hi guys,
    I've deployed a web application which is in production mode on a weblogic server 10.3.2.0, OS linux.
    In this web application, we send e-mails using javamail library. The mail server is a remote server from this one.
    At the beginning, all was working fine. Now it's impossible to receive e-mail but i've no exception launched, no trace of problem....
    I've tested manually the smtp connection between both servers. It's OK.
    It seems the problem comes from weblo.
    The problem is that i don't know how to test it to find out what is wrong. Is it possible to see what happen in the console portal of the weblogic server and how ?
    Any idea, please it's urgent !!!

    Yes - it is a bit frightening... Had other Macs before this MacBook (Pro), and never experienced such a problem. Don't know - of course I look into the Preference settings from time to time, and maybe I have changed that setting on the other computers... it never occurred to me...
    What an annoyance such a simple decision to make the auto-shutdown after one hour a default can be! Probably, Apple reconsiders :-D I'd rather prefer an auto-lock of the account (instead of an auto-log off)... but I believe it has been expressed often enough that, in this particular case, the - pardon me - Windows-solution (to offer a simple lock of the account, the Windows-L-key combination, IIRC) is much more practical... to copy that behaviour under Mac OS X, You'd have to go through lengths...
    Anyway! Pondind, thank You very much!!! Solved a kind of embarassing, but huge problem of mine!
    Best,
    Björn

Maybe you are looking for

  • Batch Determination in time of Goods Issue

    Hi, We are doing internally numbered Batches. We got 4 btches say A- 10kg,B- 10Kg,  C- 10Kg, D- 10kg. I want to issue 30kg, at this time I want to select Batches automatically by the system which has stock thru FIFO. So that system will create 3 line

  • Tempalte registration failed

    Hi experts When am trying to register templates using OVAB am getting this error: Registering IG_HTTP to cloud_resource_pool::vm_server_pool started. Connecting to cloud_resource_pool::vm_server_pool for register operation. Connected to cloud_resourc

  • Unexpected Error - Type Initializer for Microsoft.Mashup.Host.Document.Formulas.SimpleFilterRowsFormula

    Hello! I have a client experiencing the following error regularly with Power Query (2.10.3547.461, 32-bits). I have a hard time reproducing the issue and identifying the cause, anyone experienced the same and maybe even have a solution? Best regards,

  • Removing the compounding info objects

    Hi Experts, I am having  a problem with large master data tables in the production system. There are 2 custom info objects ZPCA_Doc and ZPCA_item for PCA document number & item number. ZPCA_DOC is compounded with doc_typ and ZPCA_Item is compounded w

  • CBLAS in sun performance library coming with solaris studio 12.2

    Hello, In sunperf library coming with sun studio 12u1 (linux x86) I can use cblas callings using the standard names cblas_xxxx. This interface do not appears in sunperf.h (you can use standard cblas.h) but the objects are in libsunperf.(a|so). But in