How to append text of one JTextPane to another JTextPaneacross the network.

i am developing a chat software using client server architecture. i have a JTextPane on client end where the client types the message in multi colour,multi font and multi size formats. i can send the data to other clients but then i cannot send this formats in which the client wants to send the data. how should i achieve it. when i make the content type of the JTextPane then whatever client types it shows up properly but if i change the content type to text/html then what ever i try to type it just shows an <html> tag and doesn't show the text that the client types. i tried using the second content type with the idea of sending data to the server in html format so that when other clients JTextPane get it then it should display it that way. but it doesn't happen that way. ne suggestions?

Similar Messages

Inserting text from one JTextpane to another

How do i insert text from one jTextpane to another with the attributes i used in the first. Please help.

i'm using a defaultstyleddocument. Also.....if u know
how i can transfer this data through a
DataOutputStream to another computer.Hi again,
DefaultstyledDocument uses a tree-structure with classes in it, that implements the Element-Interface to hold the styles. It is very easy to get the plain text, but what you need to transfer a part of text from one JTextPane with DefaultStyledDocument in it to another with the same document-style in it, is a sequence of (string, AttributSet) - pairs, so you are able to insert them in the destination document by the insertString(...)-method.
It is easy to get the Element by postion from the document and retrieve the Attributset from it that it uses in that position. I guess, an approach would be, to do the following:
get the Attributset at the start of the text = AttributSet of the pair
scan the document until the set changes
extract the string from start to the position right before the set changes = string of the pair
store the (String,AttributSet)-pair in a Vector
do this in the same way, but this time the "start" will be the position of the start of the new Attributset that causes the end of the scan above.
When this is done for the hole text, that is to be transferred, you have a Vector with the String-AttributSet-pairs that you can use to insert them in the other JTextPane by calling the
insertString(...)-method with this values.
Tell me, what you are thinking about that - I don't know another method for this and had to create a solution on the fly for you, so that is perhaps not the best way to do it.
greetings Marsian

How to move iTunes from one user to another on the same Windows 7 computer

How to move iTunes from one user to another on the same Windows 7 computer? Thanks, Bob

Move the iTunes library to a shared area and then into the desired location. If this isn’t the default one, launch iTunes with the Shift key held down and choose that library.
(122379)

Copying text from one jtextpane to another

Hi,
I've two jtextpanes in my application. The first jtextpane holds styled text including icons. When i press the copy button i want it to be copied and appended to the text in the second jtextpane. how can i do this? :(...desperately looking for a solution...Thank you in advance...
Edited by: THE_MACHINE on Jun 9, 2008 4:46 AM

Maybe this can be of some use...
try {
            jTextPane2.getStyledDocument().insertString(jTextPane2.getStyledDocument().getLength() - 1, jTextPane1.getText(), /*Your attribute set*/);
        } catch (BadLocationException ex) {
        }

How can I migrate from one user to another within the same computer?

My main user account in my desktop is becoming buggy after to many migrations from different computers and long time usage. I would like to migrate from one user to another user within the same computer to see if this improves my current problems.
How can I do it in a reasonably safe and quick way?
Thank you very much, cheers, Rui
iMAC, OS 10.6.8... and yes, I love Snow Leopard light and handy... and all my programs work on it...

Move small groups of files to the /Users/Shared/ folder or another location and see if the problems disappear. Moving everything to a new user account will in all probability transfer the problems.
(119885)

How to transfer files from one partition to another on the same computer

I had a crash could not boot back into my 8.1 upgrade. Went out bought standalone 8.1. I loaded it on HD free space now I want to transfer files from one partition to another.

hi
say there are two infoobjects X and Y.
X is existing infoobject and Y in new one.
go to infosurce-search for X-create export datasource - map the rules and load the data.
This is one way.
Other way is u can use X as a reference object of Y so that both of them have same structure and both objects will share common database tables in BW which are exsting for X.
Hope this helps.
Kindly assign the points if it helps.

How to append data from one file to another

Hello,
I am trying to replace one column of numbers in a 2D array with a unique string from another file.
Pos.    Serial    Gain
2      3252      4
4        15697     4
6        15543     4
I want to replace the "4" in the third column with a string obtained from another file, such as;
Serial # 3252 Fuel Cell # arxe-2282
Time and date 09:47   09/08/07
Version 4.0
Serial # 1234 Fuel Cell # arxf-0047
Time and date 09:50 09/08/07
Version 4.0
In this case, I want to replace the "4" in the first row of the top file (after the header) with "arxe-2282" from the file just above.
This means I need to search though the second file (which will have multiple entries) and find the same serial number (in this case "3252") and then write the "arxe-2282" string in place of the "4" in the top file, right next to the "3252" number there.
The search part is proving difficult. I can replace the "4" easy enough, but only if I already know where the "arxe-2282" is in the second file.
Any ideas?
Tay

try this.....
the program uses the match pattern and scan from string functions. And there is still room for improvement.
If you have to do is more often with bigger files, you should create a lookup table first. currently the files is scanned each time ....
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
find location.vi ‏11 KB

How to load data from one Infobject into another in the same system??

Hello All,
i need to load hierarchy data (already existing in 1 Infobject) into another newly created Infobject in the same BW system.Is there a way to do it without involving flat files??
Thanks soo much in advance
Regards,
Priya

hi
say there are two infoobjects X and Y.
X is existing infoobject and Y in new one.
go to infosurce-search for X-create export datasource - map the rules and load the data.
This is one way.
Other way is u can use X as a reference object of Y so that both of them have same structure and both objects will share common database tables in BW which are exsting for X.
Hope this helps.
Kindly assign the points if it helps.

How to transfer data from one MBP to another on the same wireless network?

Hello All,
My wife & I both have MBP's & are connect to the internet wirelessly via a Comcast-supplied Arris modem & a Belken router I purchased.
Please don't laugh too hard but when I share data with my wife I, first, transfer it onto a flash drvie, then I walk to my wife's mbp & transfer the data from the flash drive to her mbp.
I have a feeling there is a better way. Since I guess we are on the same network can I do this wirelessly some how?
Any help would be appreciated!
Thanks in advance.
Jim

here is a link to some information on AirDrop --
http://support.apple.com/kb/HT4783?viewlocale=en_US&locale=en_US

Aol email... How do I move from one email to another in the ios7 system?

iPad

Could you clarify a little on what you're trying to do?
Are you wanting to use more than one email? or are you wanting to change the email you have on the iPad? or something else?

How to get photos from one iPad two another keeping the original

My mom bought an iPad 2 I want to transfer photos from my ipad 2 to her photo folder on her new iPad. Not exactly sure how to do it. Hoping someone can advise me. Thanks

Sending the photos over WiFi might be the easiest way for you to accomplish this. The Wireless Transfer App should work. You will both have to download the app on your own devices. Read about it here.
http://www.wirelesstransferapp.com/

How to move AE5 from one computer to another without the disc?

I am working for a company that installed Adobe After Effects 5 last year on one Imac machine and we need to move that program to another computer. I believe they downloaded the application. We have a serial number, but don't want to install it on the computer it was downloaded on. Any help would be much appreciated. Thanks

If the company purchased an electronic software download version of the product then you should be able to complete the following steps to download the software:
Go to the Adobe Store for your country and sign in with your Adobe ID and password.
Click My Orders and then My Order History.
Locate the order number, and click the Download link in the Downloads column.
Start the download by doing one of the following:
Click Download and follow the onscreen instructions.
Click Akamai Download Manager and follow the onscreen instructions.
Click Alternate Download Method, and then click the .7z and .exe files (Windows) or the .dmg file (Mac OS) to download the software to your computer.

If I have many tabs open how do I move from one tab to another using the keyboard? For example to move from one window to another we have to hit alt+tab keys. How does it work for Tabs?

Thanks

Hi,
To move to the next tab it's '''Ctrl''' + '''Tab''' or '''Ctrl''' + '''Pg Dn''' (Page Down). To go to the previous tabs (reverse order) it's '''Ctrl''' + '''Shift''' + '''Tab''' or '''Ctrl''' + '''Pg Up''' (Page Up) keys. More about this and other keyboard shortcuts [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts here.]

I have two different accounts on my iMac 2011 OSX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

I have two different accounts on my iMac 2011 OCX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

I have 2 users on the imac. when entering text in the first account it is duplicated in the second

How can I copy text from one card to another while creating cards using Iphoto?

I created two cards with different pictures using Iphoto on Macnotebook.
I want to use the same text message.
How can I copy text from one card to another?

select the text and copy (edit menu ==> copy) tehn gpo to the next card and paste
LN

How to append text of one JTextPane to another JTextPaneacross the network.

Similar Messages

Maybe you are looking for