How to apply ALV view at runtime

Hi,
Now I have the view list for current alv table, but I don't know how to apply them at runtime.
I know this class CL_SALV_WD_CONFIG_TABLE, unfortunately no similar method can be found to implement this.
Any reply is highly welcome.
Thanks and regards,
Felix

Hi Felix,
If there is a saved view in ur ALV. It can be set during runtime by using the method GET_CONFIG_DATA in the ALV interface IWCI_SALV_WD_TABLE.
SAP Help document: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/93/47854a8366474f8bedabdcc43b2387/frameset.htm
Ranganathan

Similar Messages

How to save ALV data at runtime...?

Dear All,
How to Save the data of ALV report at Runtime... (I have to save data in to an internal table).
regards.

You mean that you have to get the data from a submitted program's output(alv output)?
Regards,
Rich HEilman

How to apply common View criteria for all LOV View programatically?

Hi,
In my application I use nearly 100 VOs, which will be mapped as LOV to some base VOs. These VOs are not only for LOV but also will be used directly in screen as read-only table. All these VOs contains EFF_BGN_DTand EFF_END_DT. Requirement is to display only the active records in VO.
We don't want to crete view criteria at design time for each and every VO. Instead we want to have a base ViewObjectImpl class, create at runtime and add this common criteria with the existing view criterias (If any given, which are actually required for the developer for screen specific functionality).
NOTE: As all of our VOs are custom java data source implemented and none of them have queries, we cannot use whereclause API but only ViewCriteria.
We want to create a view criteria, that somewhat looks like the below condition.
           (     (TO_CHAR( EffBgnDt, 'yyyy-mm-dd') <= '2010-02-01' )
             AND (TO_CHAR( EffEndDt, 'yyyy-mm-dd') >= '2010-02-01' )
             OR
           (     (TO_CHAR( EffBgnDt, 'yyyy-mm-dd') <= '2010-02-01' )
             AND (EffEndDt IS NULL )
           )Question:
1. Which is the best place in ViewObject class, where I will be able to create common view criteria, include it with existing criterias.
Thanks in Advance.
Raghu

No it is not working. I've tested. When i test your implementation in my sample using AM tester, it is not at all going inside getCriteriaItemClause(ViewCriteriaItem pViewCriteriaItem). For example when i say, AM.findViewObject(String ViewObjectName), followed by getEstimatedRowCount(), it should apply common filter criteria and give me the result.
Given below required scenario:
Department table:
ID     DEPT_NAME     START_DATE     END_DATE
1     Hr          1-Jan-2010
2     Purchasing     1-Jan-2010     31-Dec-2010
3     Shipping             1-Jan-2010     31-Dec-2055
4     Sales          1-Jan-2010
Common criteria to be applied (Programatically) : :bind_current_date between StartDate and EndDate or :bind_current_date >= StartDate and EndDate is null
VO specific view criteria (may vary VO to VO): DeptName not equal to 'Sales'
Expected Result:
Case 1:
         a. DeptView = AM.findViewObject("DepartmentVO")
         b. DeptView.getEstimatedRowCount()
          It should give me 3 records (Hr, Shipping, Sales)
Case 2:
         a. DeptView = AM.findViewObject("DepartmentVO")
         b. Create View Criteria 'NotSalesDeptVC', which should not list out Sales department.
         c. Apply NotSalesDeptVC using RowSet rowSet = (RowSet) this.findByViewCriteria(NotSalesDeptVC, -1, ViewObject.QUERY_MODE_SCAN_VIEW_ROWS)
         d. rowSet.getEstimatedRowCount()
          It is in-memory filtering, will not disturb the default rowset, should give me 2 records (Hr, Shipping)
Case 3:
         a. DeptView = AM.findViewObject("DepartmentVO")
         b. Apply 'NotSalesDeptVC' to the default row set, followed by executeQuery
         c. DeptView.getEstimatedRowCount()
          It should give me 2 records. (Hr, Shipping)
Case 4:
         a. DeptView = AM.findViewObject("DepartmentVO")
         b. Unapply the applied 'NotSalesDeptVC', followed by executeQuery
         c. DeptView.getEstimatedRowcount()
          It should give me 3 records (Hr, Shipping, Sales)Essence is at any point of time, User should always work with active records. He no need to write extra logic to retrieve only the active records but the base Viewobject impl should have. Note, All of my view objects are custom java data source implemented and not query based. Similarly it does not meant that all of my VOs will be having some business specific View criteria. Some VOs may have. Some VOs may not have. However basic active records criteria is applicable for all VOs

How to Pre-Select a View for ALV dashboard at runtime

Hello Experts,
The requirement is to pre-select 1 view initially (out of several configured) for 'All' users and disable the 'View-selection' dropdown function in a standard ALV dashboard. So whenever the dashboard loads, a particular view has to be set automatically for all users.
I need your help for the first part, which is to always pre-set a 'View' in a standard dashboard.
I tried to implement the suggestion provided in the following thread:
How to apply ALV view at runtime
However I couldn't make this work in my case. I created a Post-Exit of a method in Comp Ctlr of dashboard (Initialize method) - where I receive the refrence 'IWCI_SALV_WD_TABLE'. Then calling the method 'GET_CONFIG_DATA' with action 'if_salv_wd_table=>set', I try to set the view, but it has no effect.
Thanks a lot for your help,
Abir

Hi abir,
Use this and alv1 is my alv component name
    DATA LO_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
    LO_CMP_USAGE =   WD_THIS->WD_CPUSE_ALV1( ).
    IF LO_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
      LO_CMP_USAGE->CREATE_COMPONENT( ).
    ENDIF.
    DATA LO_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
    LO_INTERFACECONTROLLER =   WD_THIS->WD_CPIFC_ALV1( ).
LS_PARAM_IN TYPE IF_SALV_WD_TABLE=>S_TYPE_PARAM_CONFIG_IN.
ls_param_in-default = "your view name " ( view is of type wdr_pers_variant)
    DATA LO_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
    LO_VALUE = LO_INTERFACECONTROLLER->GET_CONFIG_DATA( ls_param_in )
Regards
Srinivas
Edited by: sanasrinivas on Dec 30, 2011 7:15 AM

How to add Custom View to GP Runtime Views

Hi All,
I would like to add custom view to my GP process.
In GP runtime mode the numbers you see on left hand side like "run103" "run002" are confusing to users. I would like to have appropriate name/description instead.
I understand that I can add Custom view to Runtime Views, but when I am editing a process "Add Custom View" button is always disabled.
Why that button is always disabled?
How do I define Custom View for a process?
Thanks,
Abhay

Hi Abhay,
this is a bug in SP7 which is fixed in the last patch. You can download it from the Market Place.
Best regards,
David

How to apply List box for multiple selection of rows in ALV report ?

Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subash

hi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
      wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
ENDMODULE.                    "pai INPUT
*&      Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'T517A'
    CHANGING
      ct_fieldcat      = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
   WHEN 'SLART'.
*is the first list box
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
        ls_fcat-drdn_hndl = '2'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
         EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      is_layout       = gs_layout
    CHANGING
      it_fieldcatalog = gt_fieldcat
      it_outtab       = gt_outtab.ENDFORM.                               "ALV_OUTPUT
*&      Form dropdown_table
      text
--> p1        text
<-- p2        text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.ENDFORM.                               " dropdown_table
*&      Form build_layout
      text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM.                    " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM

How to automate ALV to Excel View selection?

How to automate ALV to Excel View selection?
I'd like to view ALV data in Excel sheet. The standard way is to select "View" tab in "Change Layout" window, then click "Excel" radio button, then I should select document template from list, then I should select it again, then I need to press "Copy" button.
This is very long way! Is it possible to do it automatically, without multiple selection and pressing lots of buttons.

Hello Vladimir,
Use FM 'XXL_SIMPLE_API ' or XXL_FULL_API .
Also go thru the link :
http://www.sap-img.com/abap/download-to-excel-with-format-border-color-cell-etc.htm

Here's how to do ALV (OO) with dynamic fcat, int table and editable data

Hi everybody
Here's a more useful approach to ALV grid with OO using dynamic table, data NOT from DDIC, dynamic FCAT and how to get changed lines from the grid when ENTER key is pressed.
It's really not too dificult but I think this is more useful than the ever present SFLIGHT methods from the demos.
This also defines a subclass of cl_gui_alv_grid so you can access the protected attributes / methods of that class.
You don't need to add the class via SE24 -- done fron this ABAP.
When you run it click Edit for the first time.
After editing data press ENTER and the break point should bring you into the relevant method.
Code developed on NW2004S trial version but also works on rel 6.40 on a "Real" system.
The code should work without any changes on any system >=6.40.
All you need to do is to create a blank screen 100 via SE51 with a custom container on it called CCONTAINER1.
The rest of the code can just be uploaded into your system using the SE38 upload facility.
When running the program click on the EDIT button to enable the edit functionality of the grid.
Change your data and when you press ENTER you should get the break-point where you can see the original table and changed rows.
This program is actually quite general as it covers Dynamic tables, building a dynamic fcat where your table fields are NOT in the DDIC, intercepting the ENTER key via using an event, and accessing the protected attributes of the cl_gui_alv_grid by defining a subclass of this class in the abap.
I've seen various questions relating to all these functions but none in my view ever answers the questions in a simple manner. I hope this simple program will answer all these and show how using OO ALV is actually quite easy and people shouldn't be scared of using OO.
Have fun and award points if useful.
Cheers
Jimbo.
<b>PROGRAM zdynfieldcat.
Simple test of dynamic ITAB with user defined (not ddic) fields
Build dynamic fcat
use ALV grid to display and edit.
*When edit mode set to 1 toolbar gives possibility of adding and
*deleting rows.
*Define subclass of cl_gui_alv_grid so we can use protected attributes
*and methods.
Add event handler to intercept user entering data and pressing the
*ENTER key.
When enter key is pressed get actual value of NEW table (all rows)
rather than just the changed data.
*use new RTTI functionality to retrieve internal table structure
*details.
Create a blank screen 100 with a custom container called CCONTAINER1.
James Hawthorne
include <icon>.
define any old internal structure NOT in DDIC
types: begin of s_elements,
       anyfield1(20) type c,
       anyfield2(20) type c,
       anyfield3(20) type c,
       anyfield4(20) type c,
       anyfield5(11) type n,
       end of s_elements.
types: lt_rows type lvc_t_roid.
Note new RTTI functionality allows field detail retrieval
at runtime for dynamic tables.
data:   wa_element type s_elements ,
        wa_data type s_elements,
        c_index type sy-index,
        c_dec2 type s_elements-anyfield5,
        wa_it_fldcat type lvc_s_fcat,
        it_fldcat type lvc_t_fcat,
        lr_rtti_struc TYPE REF TO cl_abap_structdescr,    "RTTI
        lt_comp TYPE cl_abap_structdescr=>component_table,"RTTI
        ls_comp LIKE LINE OF lt_comp,                     "RTTI
        zog like line of lr_rtti_struc->components,      "RTTI
        struct_grid_lset type lvc_s_layo,
        l_valid type c,
        new_table type ref to data.
field-symbols: <dyn_table> type standard table,
               <actual_tab> type standard table,
               <fs1> type ANY,
               <FS2> TYPE TABLE.
data: grid_container1 type ref to cl_gui_custom_container.
class lcl_grid_event_receiver definition deferred.
data: g_event_receiver type ref to lcl_grid_event_receiver.
data: ls_modcell type LVC_S_MODI,
      stab type ref to data,
      sdog type s_elements.      .
class lcl_grid_event_receiver definition.
public section.
    methods:
    handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed,
       toolbar for event toolbar of cl_gui_alv_grid
                 importing e_object
                           e_interactive,
      user_command for event user_command of cl_gui_alv_grid
                 importing e_ucomm.
endclass.
*implementation of Grid event-handler class
class lcl_grid_event_receiver implementation.
method handle_data_changed.
code whatever required after data entry.
various possibilites here as you can get back Cell(s) changed
columns or the entire updated table.
Data validation is also possible here.
perform check_data using er_data_changed.
endmethod.
Method for handling all creation/modification calls to the toolbar
method toolbar.
    data : ls_toolbar type stb_button.
Define Custom Button in the toolbar
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EDIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Edit' to ls_toolbar-text.
    move icon_change_text to ls_toolbar-icon.
    move 'Click2Edit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'UPDA' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Update' to ls_toolbar-text.
    move icon_system_save to ls_toolbar-icon.
    move 'Click2Update' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EXIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Exit' to ls_toolbar-text.
    move icon_system_end to ls_toolbar-icon.
    move 'Click2Exit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
endmethod.
method user_command.
    case e_ucomm .
      when 'EDIT'.          "From Tool bar
        perform set_input.
         perform init_grid.
      when 'UPDA'.          "From Tool bar
        perform refresh_disp.
        perform update_table.
      when 'EXIT'.          "From Tool bar
        leave program.
    endcase.
endmethod.
endclass.
class zcltest definition inheriting from cl_gui_alv_grid.
define this as a subclass so we can access the protected attributes
of the superclass cl_gui_alv_grid
public section.
methods: constructor, disp_tab.
endclass.
need this now to instantiate object
as we are using subclass rather than the main cl_gui_alv_grid.
class zcltest implementation.
METHOD constructor.
CALL METHOD super->constructor
        exporting i_appl_events = 'X'
           i_parent = grid_container1.
endmethod.
method disp_tab.
FIELD-SYMBOLS: <outtab> TYPE STANDARD TABLE.
break-point 1.
mt_outtab is the data table held as a protected attribute
in class cl_gui_alv_grid.
ASSIGN me->mt_outtab->* TO <outtab>. "Original data
do whatever you want with <outtab>
contains data BEFORE changes each time.
Note that NEW (Changed) table has been obtained already by
call to form check_data USING P_ER_DATA_CHANGED
         TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Entered data is in table defined by <fs2>
In this method you can compare original and changed data.
Easier than messing around with individual cells.
do what you want with data in <fs2> validate / update / merge etc
endmethod.
endclass.
data :
    ok_code like sy-ucomm,
    save_ok like sy-ucomm,
    i4 type int4,
Container Object [grid_container]
now created via method constructor
in the subclass zcltest.
Control Object [grid]
grid1 type ref to zcltest,
Event-Handler Object [grid_handler]
grid_handler type ref to lcl_grid_event_receiver.
start-of-selection.
call screen 100.
module status_0100 output.
now display it as grid
if grid_container1 is initial.
    create object grid_container1
        exporting
          container_name = 'CCONTAINER1'.
    create object grid1.
     break-point 1.
    create object grid_handler.
    set handler:
       grid_handler->user_command for grid1,
       grid_handler->toolbar for grid1,
       grid_handler->handle_data_changed for grid1.
perform create_dynamic_fcat.
perform create_dynamic_itab.
perform populate_dynamic_itab.
perform init_grid.
perform register_enter_event.
set off ready for input initially
i4 = 0.
call method grid1->set_ready_for_input
         exporting
           i_ready_for_input = i4.
endif.
endmodule.
module user_command_0100 input.
*PAI not needed in OO ALV anymore as User Commands are handled as events
*in method user_command.
*we can also get control if the Data entered and the ENTER is pressed by
*raising an event.
Control then returns to method handle_data_changed.
endmodule.
form create_dynamic_fcat.
get structure of our user table for building field catalog
Use the RTTI functionality
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( wa_data ).
Build field catalog just use basic data here
colour specific columns as well
loop at lr_rtti_struc->components into zog.
c_index = c_index + 1.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype =   zog-type_kind.
wa_it_fldcat-intlen =    zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-lowercase = 'X'.
if c_index eq 2.
wa_it_fldcat-emphasize = 'C411'.
     endif.
    if c_index eq 3.
wa_it_fldcat-emphasize = 'C511'.
   endif.
append wa_it_fldcat to it_fldcat .
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to field sysmbol.
Use dynamic field catalog just built.
call method cl_alv_table_create=>create_dynamic_table
             exporting
                it_fieldcatalog = it_fldcat
             importing
                ep_table        = new_table.
assign new_table->* to <dyn_table>.
endform.
form populate_dynamic_itab.
load up a line of the dynamic table
c_dec2 = c_dec2 + 11.
wa_element-anyfield1 = 'Tabbies'.
wa_element-anyfield2 = 'ger.shepards'.
wa_element-anyfield3 = 'White mice'.
wa_element-anyfield4 = 'Any old text'.
wa_element-anyfield5 = c_dec2.
append wa_element to <dyn_table>.
endform.
form check_data USING P_ER_DATA_CHANGED
           TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Get altered data back
ASSIGN   p_er_data_changed->mp_mod_rows TO <FS1>.
stab =       p_er_data_changed->mp_mod_rows.
ASSIGN STAB->* TO <FS2>.
LOOP AT <FS2> INTO sdog.
ALV grid display with altered data is now in <fs2>.
do any extra processing you want here
endloop.
now display new table
call method grid1->disp_tab.
endform.
form exit_program.
call method grid_container1->free.
call method cl_gui_cfw=>flush.
leave program.
endform.
form refresh_disp.
call method grid1->refresh_table_display.
endform.
form update_table.
The dynamic table here is the changed table read from the grid
after user has changed it
Data can be saved to DB or whatever.
loop at <dyn_table> into wa_element.
do what you want with the data here
endloop.
switch off edit mode again for next function
i4 = 0.
call method grid1->set_ready_for_input
      exporting
          i_ready_for_input = i4.
endform.
form set_input.
i4 = 1.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form switch_input.
if i4 = 1.
i4 = 0.
else.
i4 = 1.
endif.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form init_grid.
Enabling the grid to edit mode,
     struct_grid_lset-edit = 'X'. "To enable editing in ALV
     struct_grid_lset-grid_title = 'Jimbos Test'.
     call method grid1->set_table_for_first_display
       exporting
         is_layout           = struct_grid_lset
       changing
         it_outtab             = <dyn_table>
         it_fieldcatalog       = it_fldcat.
endform.
form register_enter_event.
call method grid1->register_edit_event
               exporting
                  i_event_id = cl_gui_alv_grid=>mc_evt_enter.
Instantiate the event or it won't work.
create object g_event_receiver.
set handler g_event_receiver->handle_data_changed for grid1.
endform.</b>

Hi there
IE7 doesn't give me the add new page option and I get 404 error when trying to access the "How to contribute" section.
I'll load up Firefox later (this browser usually works when IE7 doesn't always work properly).
I'll copy the stuff to the wiki when I've got the browser sorted out.
Cheers
jimbp

How to wrap a view in oracle

Does any one know how to wrap a view in Oracle, I know it is not possible, yet. Are there any third party software to wrap the logic in the view.
Thanks,
Sanjay

Your best bet is to write a view that queries the source tables and contains any necessary business logic
CREATE VIEW VBASE AS SELECT A.COLUMN_A FROM TABLE_1 A, TABLE_2 B, TABLE_3 C WHERE A.ID = B.ID AND B.ID = C.ID;
create a view for exposure to the user that queries the base view.
CREATE VIEW VSECURE AS SELECT COLUMN_B FROM VBASE;
and grant privileges to VSECURE.
GRANT SELECT ON VSECURE TO SECURE_USER;
This will allow the user to see, query, and describe VSECURE without seeing the definition for VBASE.
The advantage of the this approach is that the query engine can still push predicates down into the base view to optimize the performance or the query where as this is limited with the pipeline function and can become a tuning headache.
eg.
SQL> -----------------------------------------
SQL> -- create some tables
SQL> -----------------------------------------
SQL> CREATE TABLE table_1(ID NUMBER, MESSAGE VARCHAR2(100))
Table created.
SQL> CREATE TABLE table_2(ID NUMBER, message2 VARCHAR2(100))
Table created.
SQL> CREATE TABLE table_3(ID NUMBER, message3 VARCHAR2(100))
Table created.
SQL> -----------------------------------------
SQL> -- populate tables with some data
SQL> -----------------------------------------
SQL> INSERT INTO table_1
SELECT ROWNUM,
CASE
WHEN MOD ( ROWNUM, 50 ) = 0 THEN 'HELLO there joe'
ELSE 'goodbye joe'
END
FROM DUAL
CONNECT BY LEVEL < 1000000
999999 rows created.
SQL> INSERT INTO table_2
SELECT ROWNUM,
CASE
WHEN MOD ( ROWNUM, 50 ) = 0 THEN 'how are you joe'
ELSE 'good to see you joe'
END
FROM DUAL
CONNECT BY LEVEL < 1000000
999999 rows created.
SQL> INSERT INTO table_3
SELECT ROWNUM,
CASE
WHEN MOD ( ROWNUM, 50 ) = 0 THEN 'just some data'
ELSE 'other stuff'
END
FROM DUAL
CONNECT BY LEVEL < 1000000
999999 rows created.
SQL> -----------------------------------------
SQL> --create base view
SQL> -----------------------------------------
SQL> CREATE OR REPLACE VIEW vbase AS
SELECT a.MESSAGE,
c.message3
FROM table_1 a,
table_2 b,
table_3 c
WHERE a.ID = b.ID
AND b.ID = c.ID
View created.
SQL> -----------------------------------------
SQL> --create secure view using base view
SQL> -----------------------------------------
SQL> CREATE OR REPLACE VIEW vsecure AS
SELECT MESSAGE,
message3
FROM vbase
View created.
SQL> -----------------------------------------
SQL> -- create row type for pipeline function
SQL> -----------------------------------------
SQL> CREATE OR REPLACE TYPE vbase_row
AS OBJECT
message varchar2(100),
message3 varchar2(100)
Type created.
SQL> -----------------------------------------
SQL> -- create table type for pipeline function
SQL> -----------------------------------------
SQL> CREATE OR REPLACE TYPE vbase_table
AS TABLE OF vbase_row;
Type created.
SQL> -----------------------------------------
SQL> -- create package
SQL> -----------------------------------------
SQL> CREATE OR REPLACE PACKAGE pkg_getdata AS
FUNCTION f_get_vbase
RETURN vbase_table PIPELINED;
END;
Package created.
SQL> -----------------------------------------
SQL> -- create package body with pipeline function using same query as vbase
SQL> -----------------------------------------
SQL> CREATE OR REPLACE PACKAGE BODY pkg_getdata AS
FUNCTION f_get_vbase
RETURN vbase_table PIPELINED IS
CURSOR cur IS
SELECT a.MESSAGE,
c.message3
FROM table_1 a,
table_2 b,
table_3 c
WHERE a.ID = b.ID
AND b.ID = c.ID;
BEGIN
FOR rec IN cur
LOOP
PIPE ROW ( vbase_row ( rec.MESSAGE, rec.message3 ) );
END LOOP;
END;
END pkg_getdata;
Package body created.
SQL> -----------------------------------------
SQL> -- create secure view using pipeline function
SQL> -----------------------------------------
SQL> CREATE or replace VIEW vsecure_with_pipe AS
SELECT *
FROM TABLE ( pkg_getdata.f_get_vbase ( ) )
View created.
SQL> -----------------------------------------
SQL> -- this would grant select on the 2 views, one with nested view, one with nested pipeline function
SQL> -----------------------------------------
SQL> GRANT SELECT ON vsecure TO test_user
Grant complete.
SQL> GRANT SELECT ON vsecure_with_pipe TO test_user
Grant complete.
SQL> explain plan for
SELECT *
FROM vsecure
WHERE MESSAGE LIKE 'HELLO%'
Explain complete.
SQL> SELECT *
FROM TABLE ( DBMS_XPLAN.display ( ) )
PLAN_TABLE_OUTPUT
Plan hash value: 3905984671
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 16939 | 2365K| | 3098 (3)| 00:00:54 |
|* 1 | HASH JOIN | | 16939 | 2365K| 2120K| 3098 (3)| 00:00:54 |
|* 2 | HASH JOIN | | 24103 | 1835K| | 993 (5)| 00:00:18 |
|* 3 | TABLE ACCESS FULL| TABLE_1 | 24102 | 1529K| | 426 (5)| 00:00:08 |
| 4 | TABLE ACCESS FULL| TABLE_2 | 1175K| 14M| | 559 (3)| 00:00:10 |
| 5 | TABLE ACCESS FULL | TABLE_3 | 826K| 51M| | 415 (3)| 00:00:08 |
Predicate Information (identified by operation id):
1 - access("B"."ID"="C"."ID")
2 - access("A"."ID"="B"."ID")
3 - filter("A"."MESSAGE" LIKE 'HELLO%')
Note
PLAN_TABLE_OUTPUT
- dynamic sampling used for this statement
23 rows selected.
SQL> -----------------------------------------
SQL> -- note that the explain plan shows the predicate pushed down into the base view.
SQL> -----------------------------------------
SQL> explain plan for
SELECT count(*)
FROM vsecure_with_pipe
WHERE MESSAGE LIKE 'HELLO%'
Explain complete.
SQL> SELECT *
FROM TABLE ( DBMS_XPLAN.display ( ) )
PLAN_TABLE_OUTPUT
Plan hash value: 19045890
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 2 | 15 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | 2 | | |
|* 2 | COLLECTION ITERATOR PICKLER FETCH| F_GET_VBASE | | | | |
Predicate Information (identified by operation id):
2 - filter(VALUE(KOKBF$) LIKE 'HELLO%')
14 rows selected.
SQL> -----------------------------------------
SQL> -- note that the filter is applied on the results of the pipeline function
SQL> -----------------------------------------
SQL> set timing on
SQL> SELECT count(*)
FROM vsecure
WHERE MESSAGE LIKE 'HELLO%'
COUNT(*)
19999
1 row selected.
Elapsed: 00:00:01.42
SQL> SELECT count(*)
FROM vsecure_with_pipe
WHERE MESSAGE LIKE 'HELLO%'
COUNT(*)
19999
1 row selected.
Elapsed: 00:00:04.11
SQL> -----------------------------------------
SQL> -- note the difference in the execution times.
SQL> -----------------------------------------

How to create a view with Oracle apps Org initialization ?

Hi,
How to create a view which needs Oracle apps org initialization to provide the correct data .
The purpose of the view is to be accessed in Primavera DB via a DB link for reporting purpose.
So how should the org be initialized so that the view returns the correct data when accessed from the remote data base using the DB link?
EX: step1 run fnd_client_info.set_org_context for the org
step2 query the veiw returns correct data in Oracle.
How can this be achieved if the view needs to be accessed via DB link?
sample view sql :
select po_header_id
from po_distributions_all pod
where (apps.po_intg_document_funds_grp.get_active_encumbrance_func
('PO',
pod.po_distribution_id
) <> 0
Thanks in advance!
Darshini

Hi,
This is not possible in Oracle. What u can do is create the view without the where clasue and supply the where clause at runtime.
Hope this helps...
Regards,
Ganesh R

How to get the view Object in UserDefined Action

Hi All,
Any body tell me how to get the view object , like the view object avilable in the wdDoModifyView() method as parameter.
I have requirement like, i want to change the , no of rows displaying in the table should be changed at the runtime based onthe no of rows selected in the dropdown box.
The action which i created will be assigned to that dropdown box, on select of the available option, i will get the view object and change the properties of the "maxrows" of the table .
so for getting the view object in the the Action methods tell me what is the procedure for getting the current view object.

Hello Vishal,
Simply create a value attribute (say rowCount) of type 'integer' and bind it to the 'visibleRowCount' property of your table. Then, in the actionHandler get the value from the UI element (in your case, I guess it is drop down) and set it to the attribute 'rowCount' like this.
wdContext.currentContextElement.setRowCount(
wdContext.current<nodeElement>.set<AttributeBound toDropDown>);
Bala

How to assign ALV for parent node and child node that uses supply method.?

HI Dear friends,
I need to display header details ( VBAK ) and Item details ( VBAP ). I have created two node like HEADER_NODE inside this i have created ITEM_NODE for this item node i use supply function 'GET_ITEMS' any way it is working only when crete two separate table and binding but when i come to work with ALV i am totally confused .. i have created two 'View Controller UI Elements' when i try to map HEADER_NODE it mapped properly but for ITEM_NODE it shows mapping already defined. return status message as 'Action Cancelled' . In result both ViewContainer shows only HEADER_NODE data only.
How to achive ALV for Parent, child node that uses supply function ? ?
Thank you

Delete Mapping is not enabled, that means there is no mapping done yet.
I just tried what you are saying and the application works and i am able to map the header table and item table and also again i could map the tables any number of times.. i didn't get any such message, sorry i couldn't recreate the scenario. might be there is something wrong in the context.
i just did it like this.
Please also move this to Web DynPro Discussion, Hope that would be helpful.
Message was edited by: Syed Ghulam Ali

How to create hashed table in runtime

hi experts
how to create hashed table in runtime, please give me the coading style.
please help me.
regards
subhasis

Hi,
Have alook at the code, and pls reward points.
Use Hashed Tables to Improve Performance :
report zuseofhashedtables.
Program: ZUseOfHashedTables                                        **
Author: XXXXXXXXXXXXXXXXXX                                 **
Versions: 4.6b - 4.6c                                              **
Notes:                                                             **
    this program shows how we can use hashed tables to improve     **
    the responce time.                                             **
    It shows,                                                      **
       1. how to declare hashed tables                             **
       2. a cache-like technique to improve access to master data **
       3. how to collect data using hashed tables                  **
       4. how to avoid deletions of unwanted data                  **
Results: the test we run read about 31000 rows from mkpf, 150000   **
         rows from mseg, 500 rows from makt and 400 from lfa1.     **
         it filled ht_lst with 24500 rows and displayed them in    **
         alv grid format.                                          **
         It needed about 65 seconds to perform this task (with     **
         all the db buffers empty)                                 **
         The same program with standard tables needed 140 seconds **
         to run with the same recordset and with buffers filled in **
Objetive: show a list that consists of all the material movements **
         '101' - '901' for a certain range of dates in mkpf-budat. **
the columns to be displayed are:                                   **
         mkpf-budat,                                               **
         mkpf-mblnr,                                               **
         mseg-lifnr,                                               **
         lfa1-name1,                                               **
         mkpf-xblnr,                                               **
         mseg-zeile                                                **
         mseg-charg,                                               **
         mseg-matnr,                                               **
         makt-maktx,                                               **
         mseg-erfmg,                                               **
         mseg-erfme.                                               **
or show a sumary list by matnr - menge                             **
You'll have to create a pf-status called vista -                   **
See form set_pf_status for details                                 **
tables used -
tables: mkpf,
        mseg,
        lfa1,
        makt.
global hashed tables used
data: begin of wa_mkpf, "header
      mblnr like mkpf-mblnr,
      mjahr like mkpf-mjahr,
      budat like mkpf-budat,
      xblnr like mkpf-xblnr,
      end of wa_mkpf.
data: ht_mkpf like hashed table of wa_mkpf
      with unique key mblnr mjahr
      with header line.
data: begin of wa_mseg, " line items
      mblnr like mseg-mblnr,
      mjahr like mseg-mjahr,
      zeile like mseg-zeile,
      bwart like mseg-bwart,
      charg like mseg-charg,
      matnr like mseg-matnr,
      lifnr like mseg-lifnr,
      erfmg like mseg-erfmg,
      erfme like mseg-erfme,
      end of wa_mseg.
data ht_mseg like hashed table of wa_mseg
      with unique key mblnr mjahr zeile
      with header line.
cache structure for lfa1 records
data: begin of wa_lfa1,
      lifnr like lfa1-lifnr,
      name1 like lfa1-name1,
      end of wa_lfa1.
data ht_lfa1 like hashed table of wa_lfa1
      with unique key lifnr
      with header line.
cache structure for material related data
data: begin of wa_material,
      matnr like makt-matnr,
      maktx like makt-maktx,
      end of wa_material.
data: ht_material like hashed table of wa_material
        with unique key matnr
        with header line.
result table
data: begin of wa_lst, "
      budat like mkpf-budat,
      mblnr like mseg-mblnr,
      lifnr like mseg-lifnr,
      name1 like lfa1-name1,
      xblnr like mkpf-xblnr,
      zeile like mseg-zeile,
      charg like mseg-charg,
      matnr like mseg-matnr,
      maktx like makt-maktx,
      erfmg like mseg-erfmg,
      erfme like mseg-erfme,
      mjahr like mseg-mjahr,
      end of wa_lst.
data: ht_lst like hashed table of wa_lst
        with unique key mblnr mjahr zeile
        with header line.
data: begin of wa_lst1, " sumary by material
      matnr like mseg-matnr,
      maktx like makt-maktx,
      erfmg like mseg-erfmg,
      erfme like mseg-erfme,
      end of wa_lst1.
data: ht_lst1 like hashed table of wa_lst1
        with unique key matnr
        with header line.
structures for alv grid display.
itabs
type-pools: slis.
data: it_lst            like standard table of wa_lst with header line,
      it_fieldcat_lst   type slis_t_fieldcat_alv with header line,
      it_sort_lst       type slis_t_sortinfo_alv,
      it_lst1           like standard table of wa_lst1 with header line,
      it_fieldcat_lst1 type slis_t_fieldcat_alv with header line,
      it_sort_lst1      type slis_t_sortinfo_alv.
structures
data: wa_sort         type slis_sortinfo_alv,
      ls_layout       type slis_layout_alv.
global varialbes
data: g_lines type i.
data: g_repid like sy-repid,
      ok_code       like sy-ucomm.
selection-screen
"text: Dates:
select-options: so_budat for mkpf-budat default sy-datum.
"text: Material numbers.
select-options: so_matnr for mseg-matnr.
selection-screen uline.
selection-screen skip 1.
"Text: show summary by material.
parameters: gp_bymat as checkbox default ''.
start-of-selection.
perform get_data.
perform show_data.
end-of-selection.
      FORM get_data                                                 *
form get_data.
        select mblnr mjahr budat xblnr
            into table ht_mkpf
           from mkpf
          where budat in so_budat. " make use of std index.
have we retrieved data from mkpf?
describe table ht_mkpf lines g_lines.
if g_lines > 0.
if true then retrieve all related records from mseg.
Doing this way we make sure that the access is by primary key
of mseg.
The reason is that is faster to filter them in memory
than to allow the db server to do it.
    select mblnr mjahr zeile bwart charg
             matnr lifnr erfmg erfme
      into table ht_mseg
      from mseg
        for all entries in ht_mkpf
     where mblnr = ht_mkpf-mblnr
       and mjahr = ht_mkpf-mjahr.
endif.
fill t_lst or t_lst1 according to user's choice.
if gp_bymat = ' '.
    perform fill_ht_lst.
else.
    perform fill_ht_lst1.
endif.
endform.
form fill_ht_lst.
refresh ht_lst.
Example: how to discard unwanted data in an efficient way.
loop at ht_mseg.
filter unwanted data
    check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
    check ht_mseg-matnr in so_matnr.
read header line.
    read table ht_mkpf with table key mblnr = ht_mseg-mblnr
    mjahr = ht_mseg-mjahr.
    clear ht_lst.
* note : this may be faster if you specify field by field.
    move-corresponding ht_mkpf to ht_lst.
    move-corresponding ht_mseg to ht_lst.
    perform read_lfa1 using ht_mseg-lifnr changing ht_lst-name1.
    perform read_material using ht_mseg-matnr changing ht_lst-maktx.
    insert table ht_lst.
endloop.
endform.
form fill_ht_lst1.
refresh ht_lst1.
Example: how to discard unwanted data in an efficient way.
         hot to simulate a collect in a faster way
loop at ht_mseg.
filter unwanted data
    check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
    check ht_mseg-matnr in so_matnr.
* note : this may be faster if you specify field by field.
    read table ht_lst1 with table key matnr = ht_mseg-matnr
    transporting erfmg.
    if sy-subrc <> 0. " if matnr doesn't exist in sumary table
    " insert a new record
      ht_lst1-matnr = ht_mseg-matnr.
      perform read_material using ht_mseg-matnr changing ht_lst1-maktx.
      ht_lst1-erfmg = ht_mseg-erfmg.
      ht_lst1-erfme = ht_mseg-erfme.
      insert table ht_lst1.
    else." a record was found.
    " collect erfmg. To do so, fill in the unique key and add
    " the numeric fields.
      ht_lst1-matnr = ht_mseg-matnr.
      add ht_mseg-erfmg to ht_lst1-erfmg.
      modify table ht_lst1 transporting erfmg.
    endif.
endloop.
endform.
implementation of cache for lfa1.
form read_lfa1 using p_lifnr changing p_name1.
        read table ht_lfa1 with table key lifnr = p_lifnr
        transporting name1.
if sy-subrc <> 0.
    clear ht_lfa1.
    ht_lfa1-lifnr = p_lifnr.
    select single name1
       into ht_lfa1-name1
      from lfa1
    where lifnr = p_lifnr.
    if sy-subrc <> 0. ht_lfa1-name1 = 'n/a in lfa1'. endif.
    insert table ht_lfa1.
endif.
p_name1 = ht_lfa1-name1.
endform.
implementation of cache for material data
form read_material using p_matnr changing p_maktx.
read table ht_material with table key matnr = p_matnr
transporting maktx.
if sy-subrc <> 0.
    ht_material-matnr = p_matnr.
    select single maktx into ht_material-maktx
      from makt
     where spras = sy-langu
       and matnr = p_matnr.
    if sy-subrc <> 0. ht_material-maktx = 'n/a in makt'. endif.
    insert table ht_material.
endif.
p_maktx = ht_material-maktx.
endform.
form show_data.
if gp_bymat = ' '.
    perform show_ht_lst.
else.
    perform show_ht_lst1.
endif.
endform.
form show_ht_lst.
"needed because the FM can't use a hashed table.
it_lst[] = ht_lst[].
perform fill_layout using 'full display'
                       changing ls_layout.
perform fill_columns_lst.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program       = g_repid
            i_callback_pf_status_set = 'SET_PF_STATUS'
            is_layout                = ls_layout
            it_fieldcat              = it_fieldcat_lst[]
           it_sort                  = it_sort_lst
       tables
            t_outtab                 = it_lst
       exceptions
            program_error            = 1
            others                   = 2.
endform.
form show_ht_lst1.
"needed because the FM can't use a hashed table.
it_lst1[] = ht_lst1[].
perform fill_layout using 'Sumary by matnr'
                       changing ls_layout.
perform fill_columns_lst1.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program       = g_repid
            i_callback_pf_status_set = 'SET_PF_STATUS'
            is_layout                = ls_layout
            it_fieldcat              = it_fieldcat_lst1[]
           it_sort                  = it_sort_lst
       tables
            t_outtab                 = it_lst1
       exceptions
            program_error            = 1
            others                   = 2.
endform.
form fill_layout using p_window_titlebar
               changing cs_layo type slis_layout_alv.
clear cs_layo.
cs_layo-window_titlebar        = p_window_titlebar.
cs_layo-edit                   = 'X'.
cs_layo-edit_mode              = space.
endform.                    " armar_layout_stock
form set_pf_status using rt_extab type slis_t_extab.
create a new status
and then select extras -> adjust template -> listviewer
set pf-status 'VISTA'.
endform.        "set_pf_status
define add_lst.
clear it_fieldcat_lst.
it_fieldcat_lst-fieldname     = &1.
it_fieldcat_lst-outputlen     = &2.
it_fieldcat_lst-ddictxt       = 'L'.
it_fieldcat_lst-seltext_l       = &1.
it_fieldcat_lst-seltext_m       = &1.
it_fieldcat_lst-seltext_m       = &1.
if &1 = 'MATNR'.
    it_fieldcat_lst-emphasize = 'C111'.
endif.
append it_fieldcat_lst.
end-of-definition.
define add_lst1.
clear it_fieldcat_lst.
it_fieldcat_lst1-fieldname     = &1.
it_fieldcat_lst1-outputlen     = &2.
it_fieldcat_lst1-ddictxt       = 'L'.
it_fieldcat_lst1-seltext_l       = &1.
it_fieldcat_lst1-seltext_m       = &1.
it_fieldcat_lst1-seltext_m       = &1.
append it_fieldcat_lst1.
end-of-definition.
form fill_columns_lst.
set columns for output.
refresh it_fieldcat_lst.
add_lst 'BUDAT' 10.
add_lst   'MBLNR' 10.
add_lst 'LIFNR' 10.
add_lst 'NAME1' 35.
add_lst 'XBLNR' 15.
add_lst    'ZEILE' 5.
add_lst    'CHARG' 10.
add_lst   'MATNR' 18.
add_lst   'MAKTX' 30.
add_lst   'ERFMG' 17.
add_lst   'ERFME' 5.
add_lst   'MJAHR' 4.
endform.
form fill_columns_lst1.
set columns for output.
refresh it_fieldcat_lst1.
add_lst1 'MATNR' 18.
add_lst1 'MAKTX' 30.
add_lst1 'ERFMG' 17.
add_lst1 'ERFME' 5..
endform.
Regards,
Ameet

How to apply source code

Does Contribute allow Admins to paste in (apply) source code
to various Web pages? I've got a source code from Google Analytics
I want to use for tracking and can't find how to apply it using
Contribute.

Use Insert--> HTML Snippet and insert the Google Analytics
code at the end of the page. I tried in one of my site, it worked
fine.
When viewed the page source the GA code was insert here
<GA code comes here>
</p>
</td>
</tr>
</table>
</td>
</tr>
</table>
</td>
</tr>
</table>
</body>
</html>
Thanks

How to Apply Windows 8´s themepack during Task Sequence

I was trying to find any info, how to apply themepack with TS, during Windows 8.1 deployment, but there is no info I could find.
I´m aming to customize fully the look of Windows 8.1, I aleady have different layout profiles pushing to tablets and PCs, but I also want to fully redo and deploy my own theme. I have W8.deskthemepack file saved (480 kb size), but how I could apply
it with run command line as default theme? It must also cantain the lock screen.
I know about desk.cpl but I have no idea how to add switches around it.

Hi,
I found a relevant blog for your reference.
Windows 8 Deploy – Apply Theme
http://www.bewi.at/?p=803
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Thanks for help, I will try this and report the result! Thanks, I will mark your post as an answer later.

How to apply ALV view at runtime

Similar Messages

Maybe you are looking for