Drill Down Reports and Drag & Drop capability Tool for Developer2000

I am currently doing my development in Developer2000 rel. 2.0.
I have seen many tools for VB which provide the facility for Drill Down reporting and drag & drop option in reporting, but unable to find any tool for developer2000. I wonder if anyone can guide me about any tool for developer2000 which can provide these facilities in reporting and forms.......
Qamar Bilal

you can use the mouse triggers to do drag and drop.
you have mouse-move and mouse-enter etc...
what do you mean by drill down?
you can do drill down reporting in reports by using srw.run_report built in and you can also use oracle discoverer.

Similar Messages

Difference between Drill down Report and Interactive Report

What is the difference between Drill down Report and Interactive Report?

Hi,
Drill down report and Interactive report seems to be acts as same. But there is a minor difference between those two.
Drill Down Report - When you click on a particular field in a report it drills down to the next report, it won't trigger another screen.
Interactive Report - When you click on a particular field in a report it will trigger another report based on the field clicked. It opens another session internally in the same screen.
Regards,
Jayaram...

Product Drill Down Reporting and Using KKC7/KKC8 & KKRV

Hello Guys,
Need some expert advise on my issue.
1. I have created a product group using T-code KKC7 and assigned materials to my product group.
2. I have done some material movement posting using 261 on these materials.
3. Next I run KKRV to collect data
4. Next I run Report S_ALR_87013139
I expect to see drill down report by product group but I dont see anything?
Is there something else which needs to be set?
In spro I have checked reporting control parameters and its all good.
Please share your thoughts.
Regards,
Sanjeev

Dear Sanjeev,
Did you get an error or information message when you execute S_ALR_87013139?
Best regards,
Jason

Drill Down Report using Crystal reports in eclipse and jspviewer

Hi
I want to understand how to write a drill down report since I have a requirement for my project, so I tried to run the sample drill down.rpt that is available with Crystal Reports 2008 Complete Reference book by George Peck.
I can see the results correctly( i.e. can drill down) in the preview tab . Since I am working inside the eclipse, the way I run the reports is first "Create report viewer JSP" by right clicking the report and have a url mapping to this jsp. I am running the reports from a hyperlink that maps to the url which will launch the jsp.
the jsp is:-
<%@ page contentType="text/html; charset=UTF-8" pageEncoding="ISO-8859-1" %><%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %><crviewer:viewer reportSourceType="reportingComponent" viewerName="Drill Down-viewer" reportSourceVar="Drill Down" isOwnPage="true" allowDrillDown="true">
 <crviewer:report reportName="reports/Drill Down.rpt" />
</crviewer:viewer>
The one that was created by "Create report viewer JSP" did not had "allowDrillDown" attribute at all .But I added it since it isnt working.
So when I launch my web app and click on the link to run the report, I get the report results but only to the summary level. When I double click the summary level I get a 404 error page.
Can please anyone suggest what is going on.
Thanks
poonam

Ok. So, you added the report to the project. Now we have to add the CR assemblies to the project, add the viewer (if need be) and fire it off. Simplest code would be:
Public Sub New()
 ' This call is required by the designer.
 InitializeComponent()
 ' Add any initialization after the InitializeComponent() call.
 CrystalReportViewer1.ReportSource = ("path to report")
 End Sub
In this case you are using the viewer SDK to runt he report. The report will prompt for any logon parameters - but you can code these also. You can load the report via the engine as bellow. Again, the report will prompt. I prefer to use the engine as it is way more "extensible"...
Public Sub New()
 ' This call is required by the designer.
 InitializeComponent()
 ' Add any initialization after the InitializeComponent() call.
 Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
 crReportDocument.Load("path to report")
 'Bind the report to the viewer
 CrystalReportViewer1.ReportSource = crReportDocument
 End Sub
If you have a report added to the project (strongly typed) the code would be:
CrystalReportViewer1.ReportSource = New myReport()
For more details, I'd recommend looking at the sample app vbnet_win_simplepreviewreport.zip available from the following location:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
The developer help files are here:
[SAP Crystal Reports .NET SDK Developer Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip]
[SAP Crystal Reports .NET API Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip]
- Ludek

Drill Down Reports - Very Urgent

I have the following situation.
I want to create a drill down report and pass parameters from the
master report to the detail.
I built 2 simple tabular reports Drill1 (master) and Drill2 (detail). I have placed a button in the repeating frame of the Drill1 report, and I wrote the following code in its trigger:
srw.run_report('report=DRILL2');
I have tested the report and it works just fine.
But .... I want to pass as a parameter to the second report the value of a field. According to the documentation I shall change the button trigger to
srw.run_report('report=DRILL2 paramform=No p_1=''' || :field1 || ''''); -- (the value is a string)
I did so but it gives me the REP-0159 error. Am I doing something wrong?
Note that I am using reports version 6.8.12.1
Thanks
Ioanna

hi Ioanna,
The Problem seems to be with the quotes in your srw.run_report command line . The appropriate commandline should be
srw.run_report('report=DRILL2 paramform=No p_1='||:field1||' ... <rest of the cmd line >');
( note the quotes before / after ||:fie1d1|| .. )
Regards
Oracle Reports Team

Transport drill down report

Dear Friends,
I created a drill down report and generate a tranport number but it wasn't transproted successfully.
Did I miss something?
Thanks,
Linda

Check in SE10 transaction is your transport request is available.If it is not transported properly then to Transport transport request
In SE10 transaction first you need to transport transport request task (You need to select truck Icon release immediatlt( F9 )) then you have to transport main request.

Drill Down Reporting Tool

Has anybody worked on the Drill Down Reporting Tool of SAP? I need some help on the output layout.
We need to display some characteristics on the output and by default the output brings out characteristic text and not the characteristic itself. Does anybody know how to handle this ?
Regards,
Sandhya.

Hi Sandhya,
Please check the following link and see if it provides any help for your problem.
<a href="http://help.sap.com/saphelp_46c/helpdata/en/ec/204b6e5733d1118b3f0060b03ca329/frameset.htm">http://help.sap.com/saphelp_46c/helpdata/en/ec/204b6e5733d1118b3f0060b03ca329/frameset.htm</a>
Regards,
Sumant.

Customized drill-down report cannot go to line item level (FGI4 and FGI1)

Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmel

Hi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM

What is the difference in Interactive reports and Drill down reports?

What is the difference in Interactive reports and Drill down reports? Are they same?

Hi FRD ,
Both are same .
as far as i know there is no difference .
bye .

Report painter and drill down reports

Hi SAP gurus,
Can any froward configuration of report painter and drill down reports.
iassign points

Hiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki

Drill Down reports for Profit Centers and Segments

Hello Experts
I would like to down load the "Drill down reports for profit center and segments". I have found standard SAP documentation through (http://help.sap.com/erp2005_ehp_05/helpdata/EN/46/f6fc4e7a7569b5e10000000a114a6b/frameset.htm ).
As per the given guidelines, i have beening trying to down load from client 000, the spool request is showing finished (with out any error and in one / two seconds) .. but the reports are appearining in SAP Easy Acess.
I have checked with Basis team, whethere i have restrictions with my userid. Even with Basis id also, we are being unable to activate these reports.
Does it required any configuration / licence issues before i need to lookinto before download?
Kindly revert
Regards
Anil Kumar

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

Use different Layouts for Summary and Details in Drill down report

Hi All,
I have a 2 level drill down report in ALV.
The summary report has certain fields and the Detail report has different fields. Now my problem is that when i use a default layout (with all fields of summary report) for the summary report, and drill down to the detail report i'm missing the fields on detail that are not in Summary. And if i save the default layout as default (with all fields of Detail) and go back to sumary, I'm missing the some other fields on summary (which are not on detail report).
Is there a way to make different default layouts for each of those summary and detail reports:
Also as the layouts are choosen by the user, i cannot hardcode any particular layout;
So if the user chooses a layout for detail; it has to stay the same layout for the detail report if he goes to summary and then back to detail; unless the user changes the layout again.
I'm using two different Layout types for each report. but i still cannot get the desired effect.
Data:
 gt_layout_s type slis_layout_alv,
 gt_layout_d type slis_layout_alv,
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_s
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_summary.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_d
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_detail_disp.

Here is how you differentiate between the layout of two different grids. There is the parameter, IS_VARIANT in the function. You usually leave it empty or pass only the report name and username. What you need to do is to pass unique string for each grids to the HANDLE field of the parameter IS_VARIANT. You can probably hard code it as HEADER and DETAILS in your case. Once that is done, system identified that these two different layout for different grids.
Regards,
Ravi
Note : Please mark all the helpful answers

How to add the required characterists and key figures to drill down report?

hi,
i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

Hi Inna,
Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
Thanks for your understanding.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

New to Application Express - Drill down report question

Good evening group. I'm new to this Application and DB but can't find quite the correct answer.
QUESTION 1 - I have found and successfully used the "Drill down report example". However, I am only able to do it from a brand new application. That doesn't seem quite right though.
QUESTION 2 - I dropped a column while cleaning/correcting my data but I can't seem to get rid of it from a couple of simple HTML reports. I can't find out how to remove the column (granted I am looking for the gui tool). I would use the "query source" under the "report attributes" tab but the lower section (I believe they are the joins) have me perplexed.
Any thoughts, help would be greatly appreciated.
-Dave

Hi Dave,
>> QUESTION 1 - I have found and successfully used the "Drill down report example". However, I am only able to do it from a brand new application. That doesn't seem quite right though.
I'm not being a smart alec, but I don't see the question in this.
>> QUESTION 2 - I dropped a column while cleaning/correcting my data but I can't seem to get rid of it from a couple of simple HTML reports. I can't find out how to remove the column (granted I am looking for the gui tool). I would use the "query source" under the "report attributes" tab but the lower section (I believe they are the joins) have me perplexed.
For now, don't worry about the WHERE clause of the SQL query unless the column you dropped is in the WHERE clause as well. Beginning with SELECT and up until FROM in the query statement, if you see your column, remove it from there.
If you post your query and the column to be removed, we can help further.
Joel

REPORT PAINTER DRILL DOWN REPORT

Hi,
i need to develop report painter report with drill down for cost elments and month wise
out should be cost elements and all months
Please suggest how to use drill down
Thanks and Regards
RAVi

Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
Mark

Drill Down Reports and Drag & Drop capability Tool for Developer2000

Similar Messages

Maybe you are looking for