How to apply delta's in BI 7.0
hi experts,
can anybody give me the procedure to apply delta's in BI 7.0
thanks & regards
venkat
The deltas in BI 7.0 are a bit different than in 3.X.
DTP calculates the delta from PSA based on request that has not been uploaded into the target.
Below are some scenarios & options to handle them:
Datasource - Delta
Info Pkg Mode - Init (1st time); Delta (repetitive)
DTP Mode - Delta
Datasource - Full
Info Pkg Mode - Full
DTP Mode - Delta (Have to delete previous request in Cube through Pr Chn)
DTP Mode - Full (Rarely used; If used then all previous requests have to be deletd from PSA & cube. Else data will double up).
Look into Features [http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm]
Hope this helps,
Award points if it helps.
Thanks
Vishno.
Similar Messages
-
How i Apply step by step these notes 835163
Hi
I want to apply the SAP note 835163.
But I do not understand how i Apply step by step these notes.
Thank you advance
Best Regards,Hello Farchid,
I recommend you to do it with an ABAP developer,
because you have to make changes in 2 function modules and create three messages in Message Class 'RD'.
Also before this check with developer that notes 776151 and 808663 are already implemented if not you have to implement them.(Tcode SNOTE could be used)
After this, do not forget to correct the incorrect data, you must initialize the delta method again.
Sarhan.
Sarhan. -
Macbook pro system running slow - etrecheck shows issues - any idea how to apply fixes?
Hi I normally consider myself pretty web savvy but I'm totally lost on what to do here. This computer has been running slow since I got it, but the harddrive went sideways recently. I've never worked with a recovered drive - which I apparently have as my terminal lists my workfolder-2 so....I'm guessing I'm pretty screwed. I learned about etrecheck through the forums here but don't understand how to apply it
Would anyone help me understand what I need to do?
Here's my etrecheck:
Problem description:
very slow osx system even with only one or two apps open - standard 2013 macbook pro
EtreCheck version: 2.1.5 (108)
Report generated January 1, 2015 9:52:46 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 4 days 8:16:35
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (310.25 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N disk1 : (369.9 MB)
disk1s1 (disk1s1) <not mounted> : 54 MB
disk1s2 (disk1s2) <not mounted> : 26 MB
disk1s3 (disk1s3) <not mounted> : 34 MB
disk1s4 (disk1s4) <not mounted> : 33 MB
disk1s5 (disk1s5) <not mounted> : 65 MB
disk1s6 (disk1s6) <not mounted> : 29 MB
disk1s7 (disk1s7) <not mounted> : 26 MB
disk1s8 (disk1s8) <not mounted> : 20 MB
disk1s9 (disk1s9) <not mounted> : 36 MB
disk1s10 (disk1s10) <not mounted> : 12 MB
disk1s11 (disk1s11) <not mounted> : 35 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 2
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.4.18) [Support]
[not loaded] com.vmware.kext.vmioplug.10.1.24 (10.1.24) [Support]
[not loaded] com.vmware.kext.vmnet (0104.03.86) [Support]
[not loaded] com.vmware.kext.vmx86 (0104.03.86) [Support]
[not loaded] com.vmware.kext.vsockets (90.4.23) [Support]
/System/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4228 - SDK 10.8) [Support]
[loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.1) [Support]
[not loaded] com.waltop.iokit.driver.USBAtTablet (1.1.0) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.CalendarAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.pbs.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.tccd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.penpad.penpadtablet.plist [Support]
[loaded] org.chromium.chromoting.plist [Support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.github.GitHub.GHInstallCLI.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[failed] homebrew.mxcl.postgresql.plist [Support]
User Login Items: ℹ️
Boom Application (/Applications/Boom.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Support]
Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
QuickTime Plugin: Version: 7.7.1
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
AdobePDFViewer: Version: 10.1.1 [Support]
Autodesk123D32: Version: Autodesk123D32 1.0.6 - SDK 10.7 [Support]
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 [Support]
Safari Extensions: ℹ️
Searchme [Installed] Adware! [Remove]
3rd Party Preference Panes: ℹ️
remoting_host_prefpane [Support]
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% coreaudiod
2% Activity Monitor
1% WindowServer
1% activitymonitord
1% Google Chrome
Top Processes by Memory: ℹ️
168 MB Google Chrome
49 MB Google Chrome Helper
34 MB mds
30 MB WindowServer
26 MB Finder
Virtual Memory Information: ℹ️
93 MB Free RAM
1.39 GB Active RAM
1.35 GB Inactive RAM
1.45 GB Wired RAM
48.43 GB Page-ins
17.53 GB Page-outsSearchme [Installed] Adware! [Remove]
Start by going to Safari/Preferences/Extensions and un-install the above.
17.53 GB Page-outs
Adding some RAM would help. Even though you haven't restarted for 4+ days, this is a little high. The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing
Activity Monitor – Monitor Performance Problems
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
How do i delte more than one image at a time from all images folder on iMac
i have 7000 images in the my images folder, how can I delte them all at once?
Click on one folder (if they are nested together in parent folder) and use Select All from Edit menu; then use Move To Trash from File menu. Then use Empty Trash from Finder menu. Same with single images if all of them are in one folder.
Sometimes a folder may be where an application expects to put them, so if that's the case, be sure to leave an empty folder if its part of a system or application. There are times when ownership privilege or user permissions may be lacking, so you may not be able to move or trash them.
Hopefully its not more complicated than this.
Good luck & happy computing! -
We're deploying new Dell pc's.
Unfortunately we have a large existing install base of Office Home and Business in the field due to customers buying Office bundled on Dell machines. Buying Open License Outlook licenses is more cost effective than upgrading to Office Pro Plus for all
these users and is our preferred path. We aren’t sure how to apply these Open License Outlook licenses since the Home and Business installations work off a single license key for all the applicationsHi,
Isn't the Office bundled on Dell machines already activated?
If it's the OEM version that has been installed on the machines and you want to use retail product keys to activate the Office, it's not possible. You will need to uninstall the OEM version and install the retail version.
You can check the OEM licensing system here:
http://www.microsoft.com/OEM/en/licensing/productlicensing/Pages/office-2013-licensing-packaging.aspx
To find more help about OEM depolyment, I should recommend you to get contact with the OEM Reseller Support System
http://www.microsoft.com/OEM/en/Pages/contactus.aspx
If I misunderstood anything, please feel free to post back.
Regards,
Melon Chen
TechNet Community Support -
How to apply album cover picture to all songs on cd not just one at a time?
i found agreat website with free cd covers for my songs that will show up in the corner of my ipod. but i can figure out how to apply the picture to all the songs in an alubm an dnot just one, i can only drag the picture into the box in itunes one by one.
I highly recommend Album Cover Finder
http://www.amphonicdesigns.com/albumcoverfinder/
It's not free, but it's worth the small investment of 9 bucks.
I just point it to my iTunes library and it batch uploads the artwork to every file automatically. -
How to Apply a Newly Created Access Policy on Existing Users in OIM?
When the rule is getting failed the user is getting removed from the group but resource is not getting revoked. This is happening only for the old uses..for the users which i created now it working fine..i mean its resource is getting revoked.
(Retrofit access policy" is checked on the Access Policyand Revoke if not longer applied is checked.)
For the old users i see the POl_Key is null, for new users i see a value '10'. So i updated the pol_key for old users same as it got generated for new users '10'.
i even updated the form version too but still revoke doesn't work.
I cant go for the below approach..
In order to apply a newly created Access Policy on existing users, one has to make sure that:
1) "Retrofit access policy" is checked on the Access Policy.
2) Then run the "Set User Provisioned Date" Schedule task to apply the Access Policy on the existing users in OIM.
Note: After 9.1.0.1 BP03 the access policy execution has been moved to a new scheduled task "Evaluate User Policies" as mentioned inDocument 839368.1 :How to Use Access Policies to Provision with Groups.
Is there any other approach i can try.. if you have any idea please reply me asap
Thanks..Thanks for the reply kevin..
We decided to try the Schedule task (Set User Provisioned Date).
But i see one problem here after seeing this post in metalik --> Can Access Policies Manage The Life-cycle Of Users Created via Reconciliation? [ID 1136540.1]
According to this post Access Policies framework does not manage users who are obtained either through trusted reconciliation or target reconciliation.
Is there any custom way to achieve this??
How does the access policy framework revoke resource work? (revoke if no longer applies)??
Edited by: IDMuser19 on Jun 21, 2011 11:43 PM -
How to apply the Patchset 7 to Forms 6i
Hi all !!!
I need install the PatchSet 7 in the iAS Server 1.0.2.2.2 (concrectly at the Forms Server Service).
I had stopped all services of Oracle, and had applied the patch. But the services of Forms and Reports is missing after.
Any idea.
How to appplies the patch?
Thanks and best regards.
Carlos Hernandez
Barcelona (Spain)848478 wrote:
How to apply the latest patch set for all the Installed Modules in 11.5.10.2 along with the Roll up's if any.https://forums.oracle.com/forums/search.jspa?threadID=&q=Latest+AND+Patchsets&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Latest+AND+Patches&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
How to apply business rule over report level
Hi All,
I have a column name AAA over which i have to apply a business rule/filter like
COUNT(“X Fact”." ID") WHEN “X Fact”.”Time to Issue Policy” <= 2 days at report level.How to apply that?any idea?
Regards,
SonalHi,
Thanks for responce.
Yes my AAA col is measure column coming frm Order Fact table (i.e AAA= "Order Fact"."Number of Order") & below is Business rule which I have to apply there
COUNT(“Order Fact”."Order ID") WHEN “Order Fact”.”Time to Order” <= 3 days.How Can I apply this logic there at report level.Plz help?
Regards,
Sonal -
How to apply a Character Style that's already been made in a template document?
First of all I'd like to thank everyone that helps. I'm a complete beginner at scripting and appreciate all your help.
I'm basically using GREP expressions to find patterns in a document and apply a Character Style which has already been made. This Character style was not made using script, but just in InDesign when making and setting up the template.
var myDoc = app.activeDocument;
//Clear the find/change grep preferences.
app.findGrepPreferences = NothingEnum.nothing;
app.changeGrepPreferences = NothingEnum.nothing;
//Set the find options.
app.findChangeGrepOptions.includeFootnotes = false;
app.findChangeGrepOptions.includeHiddenLayers = false;
app.findChangeGrepOptions.includeLockedLayersForFind = false;
app.findChangeGrepOptions.includeLockedStoriesForFind = false;
app.findChangeGrepOptions.includeMasterPages = false;
//GREP Expression for finding all HEADERS
app.findGrepPreferences.findWhat = ".+\n";
//Applying formatting changes to put into All Caps, Bold and changing the font size to 12 pt.
app.changeGrepPreferences.capitalization = Capitalization.allCaps;
app.changeGrepPreferences.fontStyle = "Bold";
app.changeGrepPreferences.pointSize = "12";
myDoc.changeGrep();
//Clear the find/change preferences after the search.
app.findGrepPreferences = NothingEnum.nothing;
app.changeGrepPreferences = NothingEnum.nothing;
This is how I currently have it. I will manually define the changes to the text. The problem is, each template uses a different set of fonts and not all of them use Bold e.g. Sabon can use CE Bold.
I would like to learn how to apply a Character Style and have tried looking around but nothing seems to work.
Any help would be much appreciated.
Thanks.select the text where u went and run below script after change group as per ur template.
var myDoc = app.activeDocument;
var mySel = app.selection[0];
//Clear the find/change grep preferences.
app.findGrepPreferences = NothingEnum.nothing;
app.changeGrepPreferences = NothingEnum.nothing;
//Set the find options.
app.findChangeGrepOptions.includeFootnotes = false;
app.findChangeGrepOptions.includeHiddenLayers = false;
app.findChangeGrepOptions.includeLockedLayersForFind = false;
app.findChangeGrepOptions.includeLockedStoriesForFind = false;
app.findChangeGrepOptions.includeMasterPages = false;
//GREP Expression for finding all HEADERS
app.findGrepPreferences.findWhat = "role";
//Applying formatting changes to put into All Caps, Bold and changing the font size to 12 pt.
//app.changeGrepPreferences.capitalization = Capitalization.allCaps;
//~ app.changeGrepPreferences.fontStyle = "Bold";
//~ app.changeGrepPreferences.pointSize = "12";
app.changeGrepPreferences.appliedCharacterStyle=myDoc.characterStyleGroups.item("Style Group 1").characterStyleGroups.item("Style Group 2").characterStyles.item("Header")// Header is name of character name
mySel.changeGrep();
//Clear the find/change preferences after the search.
app.findGrepPreferences = NothingEnum.nothing;
app.changeGrepPreferences = NothingEnum.nothing;
If it's help then click yes
Mi_D -
How to apply PKCS7 Siganture to a File
How to apply PKCS7 Siganture to a File, I go through the BouncyCastle API, all it deal SMIME message.
Please suggest me how to make a PKCS7 signature to a simple business document(i.e XML File).
Thank s in advancehow to read from a file ? Probably the easiest way is to see the API documentation for java.io.BufferedReader
how to delete an item from a file Not knowing what kind of "item" it is I'd suggest building a BufferedReader that reads your input file. Walk through it one line at a time using the readLine method and if the item is not there then write it to a new file. When you get to the item you want to delete just don't write it out.
Further information on how to use file streams can be found here: http://java.sun.com/docs/books/tutorial/essential/io/filestreams.html -
How to apply dll file or user defined function in B1
Dear all,
I have dll file and user defined function which use for converting number amount to text of my language. I plan to create UDF to keep the result of function on A/R invoice and I will use this UDF on print layout desiner but I don't know how to apply my function on B1. Please kindly suggest.
Thanks you in advanced.
AngnamHi Angnam,
Check this link.
Re: amount in words
Thanks,
Srujal Patel -
Dears at Apple:
I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update on any of my devices(iPhone 4s, iPhone Touch (4th Gen), iPad (3rd Gen). Most of the "Podcasts" I listen to are music content based and wanted to apply sound enhancements(EQ) like before when integrated with ipod function. Can you consider to "fix" this issue?
Many Thanks!OK Emanuel I found a solution! I dowloaded and installed "Denon Audio" app from the iTunes store & it works great! It has an EQ you can set curves on manually or use the (few) built in pre-sets. It is a player like the Music app that comes with the iPhone, etc. but restores the EQ functionality so we can adjust the audio of PODCASTS:-) Until Apple fixes this what I consider a bug I will be using the Denon app as my default music player!
-
How to apply business rules with out breaking to patch missing data
Hello Experts,
I am very new to SQL And i have no idea how to apply below rules
Data is polling for every 5 minutes so 12 time intervals per hour 6:00 -->1
6:05---->2
6:50---->11
6:55---->12
6:50---->11
Missing value
Patching
Rule
No values missing
No patching
0
Time interval 1 is null
Time interval 1 is patched with the value from time interval number 2 subject to this not being null.
1.1
Time interval 12 is null
Time interval 12 is patched as the value of time interval 11 subject to this not being null.
1.2
Time intervals 1 and 2 are null
Time interval 1 and 2 are both patched with the value of time interval 3 subject to this not being null
1.3
Two consecutive time intervals (excluding both 1 & 2 or both 11&12) are null e.g. time interval 3 and 4 are null
Average the preceding and succeeding time intervals of the missing 2 values. If time intervals 3 and 4 are null then these become the average of time intervals 2 and 5.
1.4
Time intervals 11 and 12 are missing
Time interval 11 and 12 are both patched with the value of time interval 10 subject to this not being null
1.5
Some time intervals between 2 and 11 are null with 6 or more non null time intervals
Time interval is patched with the average of interval – 1 and interval + 1 subject to these not being null.
For example if time interval 5 was null this would be patched with an average of time interval 4 and time interval 6
n.b this rule can happen up to a maximum of 5 times.
1.6
Three consecutive time intervals are missing
Set all time intervals for the period as null
2.1
More than 6 time intervals are null
Set all time intervals for the period as null
2.2
This will be more info table structure
CREATE TABLE DATA_MIN
DAYASNUMBER INTEGER,
TIMEID INTEGER,
COSIT INTEGER,
LANEDIRECTION INTEGER,
VOLUME INTEGER,
AVGSPEED INTEGER,
PMLHGV INTEGER,
CLASS1VOLUME INTEGER,
CLASS2VOLUME INTEGER,
CLASS3VOLUME INTEGER,
LINK_ID INTEGER
Sampledata
DAYASNUMBER TIMEID COSIT LANEDIRECTION VOLUME AVGSPEED PMLHGV CLASS1vol LINK_ID
20,140,110 201,401,102,315 5 1 47 12,109 0 45 5,001
20,140,110 201,401,102,325 5 1 33 12,912 0 29 5,001
20,140,110 201,401,102,330 5 1 39 14,237 0 37 5,001
20,140,110 201,401,102,345 5 1 45 12,172 0 42 5,001
20,140,110 201,401,102,350 5 1 30 12,611 0 29 5,001
20,140,111 201,401,100,000 5 1 30 12,611 0 29 5,001
output something like FOR above sample data
DAYASNUMBER TIMEID COSIT LANEDIRECTION VOLUME AVGSPEED PMLHGV CLASS1 LINK_ID
Rule
20,140,110 201,401,102,315 5 1 47 12,109 0 45 5,001
0
20,140,110 201,401,102,320 5 1 40 12,109 0 45 5,001
1.4(patched row)
20,140,110 201,401,102,325 5 1 33 12,912 0 29 5,001
0
20,140,110 201,401,102,330 5 1 39 14,237 0 37 5,001
0
20,140,110 201,401,102,335 5 1 42 14,237 0 37 5,001
1.4(patched row)
20,140,110 201,401,102,345 5 1 45 12,172 0 42 5,001
0
20,140,110 201,401,102,350 5 1 30 12,611 0 29 5,001
0
20,140,110 201,401,102,355 5 1 30 12,611 0 29 5,001
1.2(patched row)
20,140,111 201,401,100,000 5 1 30 12,611 0 29 5,001
Any help and suggestions to extend the code to achieve would be greatly appreciate.
Note:Here the key value is Volume to be patched for missed time intervals
Thanks in advancerow_number() OVER (PARTITION BY LANEDIRECTION ORDER BY TIMEID) AS RN,DAYASNUMBER,(*to_date*(timeid,'yyyymmdd hh24miss')) as cte, COSIT,
Are you in the right place? to_date is an Oracle function, and this forum is for Microsoft SQL Server which is a different product.
Erland Sommarskog, SQL Server MVP, [email protected] -
How to apply special right to the PDF file using the LiveCycle Rights Management Server.?
I want to edit bar code field data using Adobe Reader. Bar Code field was designed and data was changing using Acrobat X1 Professional (Trial Version). But can't do so in adobe reader.I think that product has nothing to do with it. You would use LiveCycle Reader Extensions.
Maybe you are looking for
-
It seems that the only iPod with built in speakers is the iPod Touch. Is this correct?
-
Sequence Parameters: Can I use variable number of parameters?
Can I create a sequence that has a variable number of parameters? If not, Can I pass an array of objects as a paramater? In the sequence code: for (i=0; i< Parameters.Params.GetNumElements(); i++) { object o = Parameters.Params[i]; // Do something wi
-
Contacts: where is the local data file saved?
Where does Mountain Lion store the local data file for the Contacts app?
-
TS4435 Can not add photos directly from Mail to iPhoto
Apple calls Article: TS4435 a solution? Drag the photos one at a time to iPhoto? Pathetic. This is BROKEN! Has anyone discovered a better way to save attached photos to iPhoto?
-
Hi Team, Please help on below issues, and it is observed while Launch of WIP Mass Load. Cannot read value for profile option RPM_CONC_PROCESS_ID in routine &ROUTINE Available log is attached. Regards Mahesh.