How to arrange keyfigures in between characteristics in BI 7 Workbook
Hi,
How to arrange keyfigures in between characteristics in BI 7 Workbook?
Thanks,
Priya
Hi Priya
Once you Execute your query and saving the query as workbook, u can use workbook as an Excel document and can copy Paste the values in your required format of report.
in this way u can arrangekey figures in between characteristics.
i hope this would solve your problem
Regards
Jasmine
Similar Messages
-
How to Swap the Data between 2 characteristics using FOX Code
Dear All,
We have a requirement to swap the data between 2 characteristics. I tried to get the data from one characteristics using BPS variable VARV() and another characteristic need to get from craters data. But using OBJV() function it is not working for that.
If i try to swap the data between characteristics directly, they are not allowing. It says Type is not same, though it is same type as per properties wise.
Could anybody let me know is it possible to change the characteristics data between characteristics by moving between each other in FOX Formulas. General case it is possible to change the data between same chars.
Thanking you in advance.
Kind Regards,
Ram.
Edited by: RamFound the answer
⌘` the key above the tab. -
How to arrange photos in camera roll datewise its not showing datewise please let me know
how to arrange photos in camera roll datewise its not showing datewise please let me know
Emile
Bear with me a minute. You're confusing a lot of things.
1. As Larry says, on Windows you are using a File Manager for you your photos. All well and good if it works for you, but limited. Why? Because it doesn't leverage any of the extra information available with photos files. Essentially, a File Manager doesn't distinguish between a photo nd a Word file or a Music file. They are just files.
2. Photo Managers like iPhoto (Or Picasa, Aperture, Lightroom et al) work differently. They are designed to leverage the additional information available in the photo file. Case in point: Date. In the File Manager you have folders created for Year/Month/Day. In iPhoto the pics are grouped into Events automatically. These Events are based on the date and time the Photos were taken, and which is recorded in the Exif metadata for the photo file.
As we all know, when one downloads pictures from a camera, their"names" appear as a bunch of letters and the number indicating thesequence.
These are Filenames assigned by the Camera. In iPhoto you don't change Filenames you edit Titles. Titles are quite independent of filenames and are an entry in the Exif metadata.
I'm not sure what you've done in the renaming sequence, but iPhoto does not have a Sort -> by Name command. There is a Sort By Title command.
But you would not use Events for this job anyway. You would use an Album. Create an Album, drag the pics to it and then you can sort them in any order you want, manually. Then using the Batch Change Command you can create a sequence for them. So, Title the pics 'House Sale' and check the box to append number and the result:
House Sale 01, House Sale 02 etc
Regards
TD -
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
HT2729 How do I switch movies between sd and hd on my computer
How do I switch movies between SD and HD.
System Preferences > Display > Arrangement
Drag the white Menu bar from the main screen to the second screen. -
How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS
Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
JacobPlease open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise -
How do I use iMessage between an iPhone & an iPod Touch?
How do I use iMessage between an iPhone & an iPod Touch?
Set up iMessage on both devices and when th touch has wifi you can iMessage to it
-
How can i create link between ipad(xcode) and webserver?
Hi, I'm a new to iPad development and i need help,
i'm not good with english but i try to explain my question:
how can i create link between ipad(xcode) and webserver?
(the webserver ".NET" with driver odbc is connected with DB Oracle)
so, how can my ipad application access to the Oracle DB?
Create a webservice (.NET) to be place between iPad and DB, is this correct?
how can i do it?
which are libraries to include in the xcode's framework?
thxI think the following URL will be your best answer:
http://stackoverflow.com/questions/3510468/connecting-iphone-to-an-odbc-database -
How to open and navigate between human task forms in a same page?
Hi
I use Oracle BPM 11.1.1.5
I have a question about taskflows in BPM Application.
In ADF web application, I create a sipmle task flow and insert view id and bind these to jspx pages, my pages are opend in same page when
return an outcome.
For exapmle I have three pages like A,B,C.
In task flow, insert three view ids and bind to A,B,C.
My first pages is A, and when outcome is B navigate to B, when my outcome is C then navigate to C in a same page not separate pages.
But my problem is here.. in BPM Application when create task forms, every task has a separate task flow that there exist a single view id and a wild card flow in it.
In BPM workspace when initiate human task form is closed, I should press refresh button to see next human task form in task list table.
I tried to create a simple task flow and insert human task forms in it and navigate between these.. but show human task form in wrong display and don`t show some component and human task payload.
Now, my question : How to open and navigate between human task forms in a same page like software installation?Having a separate Data Control for each human task is normally the case. There is a way to assign multiple human tasks to a single data control (and one task flow), but I don't think that this is going to help you with what I think you're trying to do.
If your human task is called "EmployeeDetail", then you'd use the data control associated with this for the UI pages in the task flow diagram that is associated with this human task. For example, you might have a first page that has just the basic employee information - the fields (at least the ID field) would come from the EmployeeDetail data control. When the end user clicks "Next", you might have this UI page flow to a second UI page in the task flow diagram that has the employee's address information. You might place the address fields from the EmployeeDetail data control onto this second UI page.
You might be asking how the work item instance can automatically flow to the next interactive activity in the process while staying inside the first interactive activity's human task's task flow diagram. This is not how it works - the task flow diagram models the end user interaction while inside a single human task that is tied to a specific interactive activity in the process. If you want a the end user to be able to move the instance through multiple interactive activities in the process in one interaction, look at "Activity Guides". Activity Guides do a nice job of this.
Dan -
How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?
how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?
No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l -
How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?
Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
(74502) -
How do i share files between users
I would like to know how to share documents (files) between users on my iMac. Any suggestions would be welcome.
Choose Go to Folder from the Finder’s Go menu, provide /Users/Shared/ as the path, and drag them there.
(117100) -
How do I share files between two Macs on my wireless network?
I have an iMac G4 and an ibook G3 on a wireless network. I have "file sharing" activated on both computers. (Also Appletalk, which may or may not be a misguided move, but I got the idea from OSX "Help.")
When I try to get from either computer onto the other, my computer is recognized by name (another alternative is to log on as a "guest"). I'm prompted for a password. None of the passwords I use works. I've tried the administrative passwords for both computers.
How do I get beyond this hurdle to share files? I've posted elsewhere to no avail. This must be an easy one. How do you share files between two macs on one network?Do your accounts on the machines have the same short name? It's an issue I've seen a few names.. one machine with bsmith, the other with bobsmith, but the long names for both being "Bob Smith". The login windows would confuse users because it showed their names, but because the short names didn't match, it wouldn't work.
The password you should use is the administrative one, so I don't know why you're not having luck. -
How do I share files between users on the same Macbook pro?
I have created different users on my new Macbookpro, but I can't seem to share files between two users. Help how do I share files between users on one laptop? eg. a pdf file that I want to grab from my user x and use it on user y, thanks. By the way I have already tries going into system preferences, sharing folder, then turning on file sharing and that didnt work. thanks
From the Help Menu using the search criteria Drop Box
-
How do I share files between Macs?
I have a new Mac running Lion. My wife has a MacBook running OS X 10.6.8.
How do I share files between the 2 machines. Her laptop shows up in my Finder and my Mac shows up in her Finder. We try to copy files and it looks like they are copied (using iPhoto export), but there is nothing there. When I try to browse her laptop from my Mac, I am told I don't have permission.
Is this something that can be done? I would like to think so.Target disk mode is one way: http://support.apple.com/kb/ht1661
Another way:
Drop files in the user/Public Folder
Make changes in >Preferences>Sharing
Maybe you are looking for
-
Sql server does not exist or access is denied.
Hi, i am trying to connect a dadabase to the server from client pc. and i take the sql error [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied to the client pc. i using .udl file and ia trying to connect with sql auth
-
Hai recently I updated to ios7 on my iPod ,I didn't like it how can I revert back to ios6. ?,with regards
-
Error Handling in Oracpe form 9.4.0
Hi, Have you got good documentaion about error handling in Oracle form 9.0.4? If yes, Could you let me know? Many thanks Michael
-
I am trying to transfer the licence of a Dreamweaver CS3 Macintosh product. A transfer of licence form has been signed by the person that gave it to me. Can anyone help me to complete the process as Adobe chat say they cannot to help? They told me th
-
We need the FAQ put up the top in the sticky area (as already requested) and also ACR 5.4 is out!