How to assign approver to missing approver of workflow

We have defined approval group on specific employee so when every user create their leave then it go to specific user for approval. Now the issue is, approver has been terminated and the dynamic query is getting no record. Due to this neither approver information is appearing nor it’s not going to notification user.
Now we have updated approver name with the new, but how to assign approver to those leave request which have no approver defined.
Pls advice

I am bit confused, when i assigned from one user to another user by selecting notification and press reassign button on the main page instead of inside the request where is the same re-assinge button beside approval.
Now problem is that system has assigned all notification to new user instead of two particular record which i selected.
pls advice.

Similar Messages

How to assign approval task to a person who is not a member of the site

Hi All,
I need to assign approval task to a person who is not a member of site but member of team site.
I know that if a person need to approve/reject task form should have atleast contribute permission.
Is it possible to assign contribute permission to that person through workflow using impersonate step?

You can assign permission through workflow using impersonate step and add list item permission. Few things to note here
1) Impersonate step actually impersonate the person who last modified the workflow. This impersonation is similar to code impersonation. So you have to be careful that person who is creating this workflow does have permission to assign permission to others.
2) You will have to assign permission to the list item (or list) where the item is as well as the task list item (or list) where your workflow task would be created. I think that would be Association: Task List when in SPD.
3) If user does not have any permission at the site level then the only way they can access the item and/or the task item is through the link they would have received in email.
I am not 100% sure how permission assignment works from SPD when you list and list items are inheriting permission from parent so please verify that part as well.
Amit

How to assign Dynaminc Approver in GP

Hi,
Iam developing one application in GP .In first collable object form the user has to fill the department and other details..
Depending up on the department chosen it should go to the concern department manager for approval..
For e.g IT dept the approver should IT head
         Finance dept the approver should Finance head..
How to assign the approver dynamically...
How to get the first form value and to approve
Iam using webdynpro form in GP..
Help me.
Very Urgent..
Thanks&Regards,
Kiruthika.S

Hi All,
I have problems with designing the PDB, how it is teached in the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/de/43/7e5b306b3b2679e10000000a1553f7/content.htm">help-link</a>.
My Block design:
Block: Confirm Decision (sequential)
      Action: Add members (Output-Table with Column
                           UserID)
      Block: PDB
            Block: Confirm (sequential)
                Action
                     CO: Confirm (Execution)
                     CO: Confirm (Display)
The mapping between Output-Table and Input-Table works, I get the Users in the Confirm-Action. But the Fill From Context doesnt work, what is the problem?
David said that its necessary that the Technical Name of the Multiline-Input-Structure (Input for PDB) and the Action (Output) is the same. But for me its not possible to rename the Multiline-Input-Structure to the technical name of the Action, because: Parameter with technical name UserStructure already exists in local context (=error message).
When I dont change the Technical Name, the mapping works, but the block doesnt work correct. The user who Add the Members (Action: Add Members) is responsible for all PDB-Actions, and the real Responsibles (like PDB-table) do not have a workitem in there worklist.
Thanks for helping me
Steve
Message was edited by: Steve Mussdorf

How can I get Apple to approve an app created by a third party?

I was trying to install an app provided by Headwaters Economics (http://headwaterseconomics.org/tools/eps-hdt/download-eps-hdt-application). When I click the install button, however, my OS gives a message saying "'install.app' can’t be opened because it is from an unidentified developer.:" The software in question is an add-on for Microsoft Excel, and it is crucial for acquiring data I use in research. The software is recommended by staff at the Bureau of Land Management. They have been working with me for a while on acquiring data. They suggest, and the online documentation at Headwaters Economics confirms, that this add-on app will fulfill my research needs. How do I get Apple to approve this app for installation.

There is no Apple approval process for this. Headwaters Economics needs to fork over the $99 to get a Developer ID so that people who install their software can be assured it came from them and isn't some malware masquerading as them. Until that happens, you will have to right click (or command click) and choose "Open" to get past the Gatekeeper.

How can i get option to approve or reject an emial in outlook in mac such that once i click on approve, the email is sent and if i click on reject it goes to sender (within our workgroup), i used to have it in windows

how can i get option to approve or reject an emial in outlook in mac such that once i click on approve, the email is sent and if i click on reject it goes to sender (within our workgroup), i used to have it in windows

Better ask on the Microsoft forums where the Office experts hang out as it's Microsofts product you're have questions about
http://answers.microsoft.com/en-us/mac

How do we control who can approve items in a list?

We are building a referral bonus list that needs to go through 4 levels of approval before being paid out. I've created the workflow, but I can't figure out how to control who is allowed to approve it. For example, it would be bad if an employee
can enter the item, and then approve it as the Manager, Director and VP so that Finance gets notified and puts it on his check.
How can I set it so that only management-level personnel are able to approve/reject specific items within the list?
John

Hi John,
If you are using a custom list as referral bonus list, you can use the PowerShell to enable the option "Create items and edit items that were created by the user" (you
can check if you need to set "Read items that were created by the user" ), then all users could only edit his own created items, then you grant "Manage lists" permission
to Manager,Director and VP on this custom list and they will be able to view and edit all items.
http://www.hersheytech.com/Blog/SharePoint/tabid/197/entryid/28/Default.aspx
If you want only Manager, Director and VP to be able to approve/reject the Approval Workflow task items, you need to grant them Contribute permissions or higher on Workflow Tasks list, and remove all others' Contribute permissions.
http://sharepoint.stackexchange.com/questions/35619/what-type-of-permission-user-needs-in-order-to-approve-workflow-task
Thanks
Daniel Yang
TechNet Community Support

How to route the information to approver with out involving sap workflows.

Hi Developers,
i have a doubt regarding how the requester filled form information will be send to approver with out involving SAP workflows in the portal.
Normally i know the procedure where users fills the form with the approver details, the filled information is routed to approver UWL by trigerring a function module thru webdynpro.
But i need to know is there any procedure to route the information without involving any backends.
Thanks in Advance.

Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
and it is a good idea to install STB on your machines.
If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
I believe that on this platform, sneep gets the serial from the output of prtconf.
There is a minor correction to be made :
After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
man -M /opt/SUNWsneep/man sneep
with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
that you will find on the physical serial tag.
The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

How to fetch APPROVER NAME and approval date dynamically for an user

Hi all..
How to fetch approver name and approval date dynamicall for an user in an email template..
can any help me to sort out this pbm,i am new to IDM..
Thanks in advance..

Access policies get a static value. You can't populate a field with an adapter. If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
-Kevin

How to show catalog items with Approval Status:Pending in a Content Search Webpart

How to show catalog items with Approval Status:Pending in a Content Search Webpart using cross site publishing. Thanks in advance.

I don't think you're going to be able to. Usually Approval Status is used in conjunction with Major/Minor versioning and while Approval Status is pending the item is usually a draft.
As a result the search crawler should not be able to see the draft items as it would not have the necessary rights to do so. (Good practice ensures that the Search Crawler has only read access and is not an elevated account for this reason)
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

How can i customize portal's Approval Detail Page?

Hi there,
I wonder how can i customize the portal Approval Detail Page? I got to know tat the package script is wrapped and cannot be unwrapped. So I am thinking to add smth like a link in the page for the mailto function. I was asked to send an email notification to the top management whenever there's smth new added approved.
where can i locate the page? or... where's the script to generate the page? Can someone suggest me?
thank you for your patient wit my question..

In SP3 you can get a DesktopBackingContext, from which you can get the desktop's definitionLabel or title. Perhaps that will work for you?

How to identify first and last approver?

Using SharePoint Designer 2010 I have a simple Approval process workflow. I will have 5 approvers but I need to populate a fields in a list that are "Initial Approver" and "Final Approver".
How do I grab the name of these approvers to display in the fields?

Hi,
I could figure out how to get last approver for Approval Process workflow:
1. Open this link and navigate to section "Change
a completion condition for the task process"
2. Change the value in Percentage
of Approved to 100%
3. Grab the name of approver in this condition.
Let me know if this works.
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered

GRC10 Access control-how/where to check if an approval request email was sent?

Hi experts
Please could you let me know how/where to check if an approval request email was sent?
I some approvers complaining that they havent received the approval request email from GRC.
Please advise.
Thanks
Ran

Hi Ranjit
I tested it as well by stripping the access back and then used STAUTHTRACE (much nicer than ST01). You are right - it is asking for S_DEVELOP 02 DEBUG
METHOD check_admin_auth .
   DATA: lo_message_manager TYPE REF TO if_wd_message_manager,
       lo_api_controller TYPE REF TO if_wd_controller,
       lr_auth_node TYPE REF TO if_wd_context_node.
   lo_api_controller ?= wd_this->wd_get_api( ).
   lo_message_manager = lo_api_controller->get_message_manager( ).
   lr_auth_node = wd_context->get_child_node( name = 'AUTH' ).
   TRY.
       cl_grfn_msmp_authorizations=>check_sap_debug_authorization( ).
       lr_auth_node->set_attribute(
          EXPORTING
            value =     'X'
            name =     'CAN_RUN'
     CATCH cx_grfn_msmp.
       MESSAGE e197(grfnmw) INTO cx_grfn_msmp=>m_msg_str. ----> E197 (GRFNMW) matches the error msg
       lo_message_manager->report_t100_message(
    METHOD check_sap_debug_authorization.
   AUTHORITY-CHECK OBJECT 'S_DEVELOP'
             ID 'DEVCLASS' DUMMY
             ID 'OBJTYPE' FIELD 'DEBUG'
             ID 'OBJNAME' DUMMY
             ID 'P_GROUP' DUMMY
             ID 'ACTVT'    FIELD '02'.
   IF sy-subrc NE 0.
     MESSAGE e219(grfnmw) WITH sy-uname INTO cx_grfn_msmp=>m_msg_str.
     grfnw_msmp_raise_msg: cx_grfn_msmp_no_authorization.
   ENDIF.
ENDMETHOD.
I recommend raising a customer incident with SAP to get their input as I don't think DEBUG should be necessary for MSMP Instance Runtime - and then let us all know the outcome
Regards
Colleen

Approve button missing.

I have the following users with their permissions on a particular forder:
author: read/write
approver: no permissions, is mentioned as a approver in a single step approval process.
Issues:
1. approver does not see the folder nor the document that is submitted for approval, in the KM Navigation iView created for this repository. I was expecting to see the document and its content folder once the document is submitted for approval.
2. Approer does get an email. But that is no mechanism for the user to approve it. It just has Actions>approval>stop approval process in the details display.
Any responses are appreciated.
Regards,
Kumar

Hi Natarajan,
you have to give the approver as minimum Read Permission for the folder in which the approver should approve documents.
The approver can see and access the documents in the moment the document is set to status "Submit for Approval" and this approver is assigned to the workflow step.
regards,
Anja

How can we reject an already approved sales quotation and sales order

Hi,
Could anyone please tell me how can we reject an already approved sales quotation and sales order.
Thanks and Regards
Mahavir

Hi,
in the document flow : i am finding documents which are given below :
Serv. notif.      00015773
Qt For NewConnection 20022016 23.04.08 Completed
Order New Connection 22460       23.04.08 Open
Z New Connection 90022430   23.04.08 FI doc. not Required
Cancel. Invoice (S1) 90023731 19.07.08 FI doc. not required
I have run VF11 for document no. 90023731 .
But when i was running VL09 i just gave the shipping point and execute the transaction.
Then i did not find any document for that selection.
Please guide .
Thanks and Regards

How to make leave absence /CAts approval in HR

how to make leave absence /CAts approval in HR

do you want to apply absences through cats with the approval
srinivas

How to assign approver to missing approver of workflow

Similar Messages

Maybe you are looking for