How to assign my custom VBA variable to a parameter

I want to be able to assign the value from my custom variable to a parameter from a script;
but I cannot figure out if it is possible;
I want to be able to manipulate a string using my VBA code, save this string to a variable, and pass it back to a one of the parameters on a page in a scripts, and continue playing the script with this new value instead, without using Data Bank;
Thank you for help.

Here is an example that sets a parameter named "UserName."
Private Sub RSWVBAPage_beforePlay()
Dim col As New Collection
col.Add "MyName"
RSWApp.SetParameterValues "UserName", col
End Sub
As you can see, this code is in the before play event. You must put this in before play in the page where the parameter exists. You can also use wild cards when identifying the parameter to be set.
For example, if you needed to look for UserName_784328732 (with a changing number value)
You could do the following RSWApp.SetParameterValues "UserName*", col
I hope this is helpful

Similar Messages

How to assign a Customer exit variable to Key figure

Hi,
I have created a Customer Exit variable to findout no. of days in the month.
But I dont know how to assign that variable to a Keyfigure value. Can you please let me know how to assign it.
Regards
Sankar

Hi Sankar,
From what I could understand, you want to display the output of that key figure for some no. of days of a month (calculated in your customer exit variable)...right ???
If that is the case then you can create a structure in columns. Create a new selection...include your key figure and that customer exit variable in it.
That shall serve the purpose.
Regards
Shalabh Jain
Edited by: Shalabh Jain on Dec 15, 2008 1:46 PM

HOW TO CREATE A CUSTOMER EXIT VARIABLE

<Moderator Message: use lower case letters next time, we don't want you to shout. --> see rules of engagement>
hi,
How to create a customer exit variable..!
in a query designer i have created the customer exit variable ,in the cmod i have created the project
for the exit rsap0001 and kept the break-point....but when i executing the query via BEX-Analyzer
where control not stoping in the break-point..
can any one help me ..what is the approch i need to do.because i new to BI..
Regards,
shahina.....!
Edited by: Siegfried Szameitat on Dec 17, 2008 10:37 AM

Hi Shahina,
1. Create formula variable var1 from to date using replacement path.
2. Create another formula variable var2 for current date using customer exit or you can use standard
formula variable for current date
3. Create calculate key figure ckf using var1 & var2.
ckf = var1 - var2.
Thanks == points
Regards
Sudheer
Edited by: SUDHEER on Dec 17, 2008 10:41 AM

Custome Exit Variable Not prepopulating Parameter of CRE Report

Hi
I am using a customer exit varibale to pre populate a parameter in a Bex query I have created. When I run the bex query the customer exit variable populates the parameter just as it is supposed to. However when I use the bex query in Crystal Reports for enterprise the customer exit variable does not pre populate the parameter. Is there something I need to do to make sure that CRE recognises the customer exit variable or does CRE not recognises them? If it doesn't recognise them is it possible to create CRE level Customer Exit Variable?
Many Thanks in advance
Neil

Hi Alun
Thanks but I'm in BW so Stored procedures are not really an option on this one. I suppose my primary question is, is there a reason that Customer Exit Variable is not working as it is creating a lot of difficulties by not populating the parameters in the same way it does in the bex query I am using to develop my Crystal report.
Thanks
Neil

How to make BEX Customer Exit Variable inactive through Customer Exit Code

Hi,
I had created two variables VAR1 and VAR2 as Customer Exit variables
If VAR1 is entered then it should automatically make the VAR2 as NO Entry Variable.
vice versa also required.
can u help me with any code in CMOD so that we can make it inactive through Customer Exit Code.
Thanks in Advance.
Sunil.

What i want is not commenting the code
I want to make the BEX Variable as inactive by using the Customer Exit Code
EX : If value in VAR1 is entered then VAR2 should become automatically inactive.
If value in VAR2 is entered then VAR1 should become automatically inactive.
how can this be done
Thanks in advance.
Sunil

How to identify what customer exit variables are used in which query?

Hi all,
When i happened to check the CMOD transaction code i can find a list of customer exits are used. But i want to know what are those customer exist are used in which query? can anyone let me know the procedure of identifying it.
Thanks a lot
Pooja

hii pooja
check the foll links
Very Urgent: Customer Exit Variable
customer exit variable
MIssing Authorisation for customer exit variable query
Authorization variable or customer exit variables
if it is helpful assign points
thanks.

How to change a customer exit variable in columns

Hallo Experts,
i have a query with two columns. In the first column is a customer exit variable, who get filled with the actual calyear. In the second column is the same variable with an offset -1.
When i execute the query, in the first column i can see the year 2007 and in the second column i can see 2006. That´s ok.
Now i want to change the year (dynamically) in a filter 2007 in 2005. The result should be in the first column 2005 and in the second column 2004.
What can i do?

Hi Jens,
As I understand the scenario, you have two RKF or selections in column 1 and 2, one is restricted with variable ZYear, the other with the same variable, offset - 1 and variable ZYear provides current year.
I think there is no way to change years dynamically in a filter, but you could solve the issue by refreshing the query and overwrite default value provided by customer exit.
To achieve this, please change variable and check 'Ready for input' in change dialog..
If this shouldn't work, please let me know details a variable definition and customer exit.
Have a nice w/e
Joe

Help.I want to learn about how to assign a custom request with manager .

Hi.
When i submit a custom single request.I got this problem.
No concurrent manager is defined to process this request, so it cannot be processed.
Contact your system administrator to define a concurrent manager to process this request or to verify that existing concurrent managers have the correct specialization rules.
Then, I check the request with request id in application manager.I found there is no manager with my program.So I think i need to assign it.But i don't know how to do it.
So.please help me.waiting for reply...
Thanks
Snail.

Check Note: 342932.1 - No Concurrent Manager is Defined to Process This Request on Shutdown of Managers
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=342932.1

Help: How to assign dynamically a javascript variable to a jsp variable???

Hello all,
What I need to do is to assign the value of the html form element which is a checkbox in this case:
<input name="ADB02_checkbox" type=checkbox id="ADB02_checkbox" onClick="decide_enable_or_disable_particular_checkbox()" value="ADB02">
to a jsp variable :
<%
String riderCode = "";
%>
Its dynamic because i need to do different operations based on different rider codes like in this function:
function decide_enable_or_disable_particular_checkbox() {
var rider = document.rider_form;
alert(rider.ADB02_checkbox.value);
if (rider.<%= riderCode%>_checkbox.checked == true) {
enable_all_row_elements_for_<%= riderCode%>();
else {
     disable_all_row_elements();
which uses the naming of the rider code to call other corresponding functions.
so is there any way that you guys ca suggest a solution.
what i thought is to do this:
function decide_enable_or_disable_particular_checkbox() {
var rider = document.rider_form;
HERE--> riderCode = rider.ADB02_checkbox.value;
alert(rider.ADB02_checkbox.value);
if (rider.<%= riderCode%>_checkbox.checked == true) {
enable_all_row_elements_for_<%= riderCode%>();
else {
     disable_all_row_elements();
or
add an onFocus="riderCode = document.rider_form.ADB02_checkbox.value;" in the checkbox tag.
but can i do that or is there any other way or is it totally impossible to assign javascript values to jsp variables.

Hi again,
I got a problem here abt looping in javascript.
The prob is that only the 1st loop works the rest are not.
So only the checkbox in the 1st row is enabled, the rest aren't.(only ADB02 is enabled not DLP01 cause ADB02 is 1st in the loop)
Here are 2 of many of the checkboxes in different rows:
<input name="ADB02_checkbox" type="checkbox" id="ADB02_checkbox" value="checkbox" onClick="val_checkbox()" disabled=true>
<input name="DLP01_checkbox" type="checkbox" id="DLP01_checkbox" value="checkbox" onClick="val_checkbox()" disabled=true>
This is declared in jsp:
<%
//to be used with javascript function prepare_elements() for checking to enable/disable checkbox , to check age base and limit of insured
String[][] riderCheckArray = {
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_ACCIDENTAL_DEATH_BENEFIT, "20", "60"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_LIFELINE_BENEFIT, "20", "50"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_MEDICASH_100_PLAN, "0", "55"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_MEDICASH_200_PLAN, "0", "55"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_MEDICASH_300_PLAN, "0", "55"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_MANUTERM_REDUCING_TERM_ASSURANCE_PLAN, "16", "65"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_PERSONAL_ACCIDENT_BENEFIT, "20", "65"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_15_YEAR_LEVEL_AND_CONVERTIBLE_MANUTERM_RIDER, "16", "55"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_20_YEAR_LEVEL_AND_CONVERTIBLE_MANUTERM_RIDER, "16", "50"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_5_YEAR_RENEWABLE_AND_CONVERTIBLE_MANUTERM_RIDER, "16", "60"},
{allPlans.PLAN_HER_MY_FUTURE, allRiders.RIDER_10_YEAR_RENEWABLE_AND_CONVERTIBLE_MANUTERM_RIDER, "16", "60"},
%>
Here's the script (the riderCheckArray[any no.] should be eg: riderCheckArray[0] (has an i in front))
<script>

function prepare_elements() {
var rider = document.rider_form;

for (i=0 ; i < <%= riderCheckArray.length%> ; i++) {
if ("<%= txtPlanCode%>" == "<%= riderCheckArray[i][0]%>" ) {
riderCode = "<%= riderCheckArray[i][1]%>";
if (<%= insuredAge.intValue()%> < <%= Integer.parseInt(riderCheckArray[i][2])%> ||
<%= insuredAge.intValue()%> > <%= Integer.parseInt(riderCheckArray[i][3])%>) {
disable_particular_checkbox();
alert("This rider cannot be attached. This rider can only be attached for age range " +
<%= riderCheckArray[i][2]%> +
" to " +
<%= riderCheckArray[i][3]%>);
else {
enable_particular_checkbox();

function enable_particular_checkbox() {
var Rdr_Checkbox = riderCode + "_checkbox";
var rider = document.rider_form;
rider.all(Rdr_Checkbox).disabled = false;
rider.all(Rdr_Checkbox).style.background ="FFFFFF";
function disable_particular_checkbox() {
var Rdr_Checkbox = riderCode + "_checkbox";
var rider = document.rider_form;
rider.all(Rdr_Checkbox).disabled = true;
rider.all(Rdr_Checkbox).style.background ="CCCCCC";
</script>

Help needed on how to assign string value to variables in process designer

Hi,
I am using LC Workbench 8.0.1 version, I have a business requirement where in my form I have a dropdown box which contains two options i.e,
1. Accept
2. Decline
If the user selects Accept, I have to route the form to user some "x" or if the user selects Decline then the form should be routed to some user "y" .
To implement this I need to capture the user selected value which is a String.
can someone explain me how to reslove this..?
thanks and regards,
sudheer

I'm assuming you're using a xfaForm variable that points to an XDP in the repository to render your document.
In that case, you set the Form Data Mapping to point to that xfaForm variable in the User step.
When the user submits the form the xfaForm variable contains the data for the form in an XML format. You can have multiple routes that come out of your user step that will check a certain value in the xfaForm variable.
The xml data for you form will be located under the /process_data/xfaForm/data/datasets/data node.
You can use an xPath similar to /process_data/xfaForm/object/data/xdp/datasets/data/myNode/MyField
you can also use the // notation to do a full search within the data node if you're not sure of the structure:
/process_data/xfaForm/object/data/xdp/datasets/data//MyFieldValue
I hope this helps.
Jasmin

How to assign information file to variable.

Hi, I created two variables.
First variable(name:v_year_bbdd)
This variable receive a year database input.
SELECT
CASE WHEN extract (month from trunc(sysdate)) = 1
THEN
extract (year from trunc(sysdate))-1
ELSE
extract (year from trunc(sysdate))
END
FROM DUAL
Second variable(name:v_year_file)
This variable receive a year a value of csv.
In the scene(package) I will compare two variables.
but my problem is how I get the value file?
The file is a csv, and value is a year.
I could have loaded this information of the file in a table, but in the scene it can´t to compare field of the table with the variable, but only I can variable with variable.
Dou you undestand me?
thanks

Hi ,
I am not sure what you meant by code image ...
All you need to do is that follow the steps mentioned in the post and then copy the code generated for "Load Data" from your own ODI operator .
Then use the same code inside your variable .
Thanks,
Sutirtha

Assigning a customer exit variable to a user entry variable

Hello all,
I'm creating a PCA query and would, in a certain column, like to show the year's cumulated value (key figure amount), based on documents posted up until a certain posting period (specified via a user entry). E.g. from 01.2006 to [user entry] where the "from"-year is also dependent of the user entry.
1) Where do I do this coding (transaction code/function module etc..)?
2) How do I do this coding?
3) Does this kind of variables exist as standard? If yes, which one?
Thanks!!!
Best regards,
Fredrik

Hello again,
I have now created a new input variable named 'Z_FPER' (single value) which I want to read into the exit variable...
I debugged the query and found out that the value of I_STEP is 1, which is wrong. It should be I_STEP = 2... However, I have definied my user exit variable as "no input" and "mandatory". What else should I do to make it a '2'?
Thanks,
Fredrik
P.S. This is the code:
*& Include ZXRSRU01
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'Z_FISCPE'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'Z_FPER'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4)."low value, e.g.200001
L_S_RANGE-LOW+4(3) = '001'.
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW. "high value = input
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
ENDCASE.

How to assign my customized smart style to the SO10 texts?

Hi .
In the standard text which we enter through SO10, I want some of the words to be coloured(blue) and some lines should be highlighted with yellow backgnd colour.
For the first part at least, how can I change the SO10 text's style to my customized style?
I can see the style list in text editor format menu->change style, but there, only some of the styles are able to select and I am not able to see my own customized style created through the tcode /NSMARTSTYLES.
Please help.
Rgds,
Madhuri
Edited by: madhuri sonawane on May 24, 2010 12:43 PM

Hi Maduri,
Check this link.....
Using custom styles in SO10
Hopet it is useful..
Regards,
Raj.

How to assign colour to a variable?

In a project have a dozen of half titles that divides the book in these parts.
Only a master page, no chapters, no sections.
In the master is inserted a variable (running header) based on the twelve half titles to identify in each page the parts (1-12)
I need to change the colour of this running header instead of creating twenty master pages.
Has it to be scripted?

Hi Camilo,
If this is what you want to do, that can be done with variables.
With left and right pages:

How do I pass a local variable as a parameter to a JSP Tag File?

I wrote a custom JSP tag file, and I want to pass a local variable to it through a parameter, like this:
<% Integer someValue = new Integer(-5); %>
<my:TestTag value="someValue"/>
This doesn't work though - the result is the string someValue. Trying to do this doesn't work either:
<% Integer someValue = new Integer(-5); %>
<my:TestTag value="someValue"/>
the value attribute ends up being null.
I know I can work arount by putting the local variable in the request attributes then using ${}, but that seems like a lot of unecessary work. Does anyone know I can just pass a local variable to the custom tag through the custom tags parameter list?

I'm far from beeing an expert, but this may be a clue (?)
Basically, the rule is: everything you want to be considerred as Java must be in a
JSP tag.
As an example, think of how you would do to pass the litteral string "someValue" otherwise. Then you may imagine other related issues...

How to assign my custom VBA variable to a parameter

Similar Messages

Maybe you are looking for