How to identify what customer exit variables are used in which query?

Hi all,
When i happened to check the CMOD transaction code i can find a list of customer exits are used. But i want to know what are those customer exist are used in which query? can anyone let me know the procedure of identifying it.
Thanks a lot
Pooja

hii pooja
check the foll links
Very Urgent: Customer Exit Variable
customer exit variable
MIssing Authorisation for customer exit variable query
Authorization variable or customer exit variables
if it is helpful assign points
thanks.

Similar Messages

HOW TO CREATE A CUSTOMER EXIT VARIABLE

<Moderator Message: use lower case letters next time, we don't want you to shout. --> see rules of engagement>
hi,
How to create a customer exit variable..!
in a query designer i have created the customer exit variable ,in the cmod i have created the project
for the exit rsap0001 and kept the break-point....but when i executing the query via BEX-Analyzer
where control not stoping in the break-point..
can any one help me ..what is the approch i need to do.because i new to BI..
Regards,
shahina.....!
Edited by: Siegfried Szameitat on Dec 17, 2008 10:37 AM

Hi Shahina,
1. Create formula variable var1 from to date using replacement path.
2. Create another formula variable var2 for current date using customer exit or you can use standard
formula variable for current date
3. Create calculate key figure ckf using var1 & var2.
ckf = var1 - var2.
Thanks == points
Regards
Sudheer
Edited by: SUDHEER on Dec 17, 2008 10:41 AM

Authorization variables are used by each query

Hi,
I am working with BW 3.5. I need to check how many authorization variables are used by each query.
Is the any table which shows this?
I know in RSZGLOBV i can display all the Auth. Variable at the system but i don't have such relation with the queries...
Thanks in advance,
F

Hi,
Get the UID of your query from the query designer (select query in the properties window, goto Advanced tab).
Pass it to table RSZELTXREF (pass query UID to field SELTUID and 'VAR' to field LAYTP). This gives the list of variables used in the query. Now got to table RSZGLOBV, pass all the variable IDs (field values for TELTUID from table RSZELTXREF) to the field VARUNIID and restrict VPROCTP to '6'. This gives a list of all the auth variables used in a query.
Regards,
Murali.

How to make BEX Customer Exit Variable inactive through Customer Exit Code

Hi,
I had created two variables VAR1 and VAR2 as Customer Exit variables
If VAR1 is entered then it should automatically make the VAR2 as NO Entry Variable.
vice versa also required.
can u help me with any code in CMOD so that we can make it inactive through Customer Exit Code.
Thanks in Advance.
Sunil.

What i want is not commenting the code
I want to make the BEX Variable as inactive by using the Customer Exit Code
EX : If value in VAR1 is entered then VAR2 should become automatically inactive.
If value in VAR2 is entered then VAR1 should become automatically inactive.
how can this be done
Thanks in advance.
Sunil

How to assign a Customer exit variable to Key figure

Hi,
I have created a Customer Exit variable to findout no. of days in the month.
But I dont know how to assign that variable to a Keyfigure value. Can you please let me know how to assign it.
Regards
Sankar

Hi Sankar,
From what I could understand, you want to display the output of that key figure for some no. of days of a month (calculated in your customer exit variable)...right ???
If that is the case then you can create a structure in columns. Create a new selection...include your key figure and that customer exit variable in it.
That shall serve the purpose.
Regards
Shalabh Jain
Edited by: Shalabh Jain on Dec 15, 2008 1:46 PM

How to change a customer exit variable in columns

Hallo Experts,
i have a query with two columns. In the first column is a customer exit variable, who get filled with the actual calyear. In the second column is the same variable with an offset -1.
When i execute the query, in the first column i can see the year 2007 and in the second column i can see 2006. That´s ok.
Now i want to change the year (dynamically) in a filter 2007 in 2005. The result should be in the first column 2005 and in the second column 2004.
What can i do?

Hi Jens,
As I understand the scenario, you have two RKF or selections in column 1 and 2, one is restricted with variable ZYear, the other with the same variable, offset - 1 and variable ZYear provides current year.
I think there is no way to change years dynamically in a filter, but you could solve the issue by refreshing the query and overwrite default value provided by customer exit.
To achieve this, please change variable and check 'Ready for input' in change dialog..
If this shouldn't work, please let me know details a variable definition and customer exit.
Have a nice w/e
Joe

Changing a customer exit variable in Step 2 which was already set in Step 1

Hello,
i have the following problem.
There are 2 BEx customer exit variables A and B.
Variable A is filled in Step 1 before the user dialog appears.
Variable B is determined in Step 2 in dependence of variable A.
Now i want to change variable A in dependence of user entry althoug it was already filled in step 1. Can i somehow force the variable manipulation in step 2 for a single variable wich has already been set in step 1?
Or is there a way to change all variables at once after they have been set e.g. in step 3?
Regards,
Alexander

Hello Alexander!
It's true: You cannot change values that were entered in step 1. It's a feature This is supposed to make sure that a value that was entered (or confirmed) by the user can never be changed by any piece of coding - customer or SAP. If that possibility existed, then that would create some real issues for reliability and also support.
What is your scenario that you are trying to solve? Maybe there's another way to do it?
Regards,
Christian!

Customer Exit Variable and Condition in a Query (Sequence of Execution)

Hi,
For a query i defined a Customer exit variable and a condition....
Which will first execute...wether it is a Variable and then Condition or vise versa
Is there any way we can control sequence of execution
My requirment is first to execute the condition and the variable how can i control this
Thanks

Hi
In your customer exit you will be having a field by name I_STEP which will help you to handle the time of execution of the variable.
Assign points if helpful
Prathish

How to read what Component Config you are using at runtime

is there any way to programatically read what Component Configuration you are running at runtime?

Have a look at IF_WD_COMPONENT, method GET_CONFIGURATION_KEY.
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/aa/0b8b85dce1a941b78eb3aedf47a378/frameset.htm

How to identify clips in finder that are used in the timeline?

Heya, this is my first post to this forum and an issue ive been struggeling with for a while...
i am trying to archive my footage and reduce the amount of HDD space old projects are taking up. I have LOADS of footage i'm never going to use again saved in folders that i want to easily identify and get rid of. Is there any way in premier pro to 'tag' files that have been used in the timeline or even the project and then i can simply go and delete those that aren't. Similar to the feature in after effects that removes unused clips from the project (though that still leaves them on the drive).
this would also make transcoding the correct files much easier as i currently have to identify each one individually by using the show in finder option...
some help on this would be much appreciated
I'm using CS5 on a macbook to edit canon DSLR footage, is there any more information that you guys need?
Cheers
Rich

In the Project Panel, click the flyout menu; that's the little stack o' pancakes thing in the upper right corner of the panel. Select "Metadata Display." In the search box, type "usage"--this will reveal the Video Usage and Audio Usage metadata labels. Check those to add them, and hit OK; they'll now be added to the columns in the Project Panel. Now, you can sort on those columns to filter by usage--the unused clips won't have a number associated with that column. Select them all, and if you really want to purge them from the drive, hit Ctrl/Cmd+Delete--that will remove the media from the drive.
If you just want to get rid of the clips, Project > Remove Unused will do that.

How to recognise what type of keys are used in the laptop keyboard reading its bottom description?

How to recognise the type of keys (regarding hinges, clips etc.) used in the HP laptop keyboard reading just its bottom description like:
AEUT3U00040
574261-001
dfe p/n: 9j.n0y82.p01
rev.3b
model no. ut3
aut3usam2yr349
Many thanks.

Could you please give me the exact model number of your notebook?
You can use the following document if you need assistance in finding it.
How Do I Find My Model Number or Product Number?
And actually I would recommend contacting HP phone support if you are needing to order the keyboard or replacement keys.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to Write a CUstomer Exit for a variable in BEx

Hi,
How to write a customer exit variable in bex Query designer
Do i need developers key for this (If so what type of key do i need so that i can ask basis tean to generate)
Info Object: ZEXP_DTE (Expiry Date)
Variable on ZEXP_DTE :
ZEDTE
Type: Customer Exit
Can any one please tell me how to write a code in CMOD from this (Step-by Step)
Expiry Date > Current Cal Day
As arun said
'l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.'
I want to insert the above code for the above customer exit but as i am new to BW as ABAP please explain me what are the steps involved in CMOD
Thanks

Hi,
To write customer exit for a variable, you require Access key.
Contact your BASIS to get that.
Access Key,BASIS?
To write Customer exit,
User Exits
User Exit for Variable
/thread/809285 [original link is broken]
Hope these helps u...
Regards,
KK.

Query Drilldown does not Invoke Customer Exit Variables

We have a problem with performing a drilldown in a BEx Analyzer reprot, basically the client is a Trading company and they have inter company trading. We are using the Profit Centre as one of thre u201CFree Characteristicsu201D in the query and hence we are able to drilldown on a Characterictc by Profit Centre.
We are using a couple of BEx query variables (Customer Exit variables) to determine the inter-area and extrenal area profit centres and these profit centres will be different based on the level of Hieracry node selected when the query is initially executed. For example if we assume a hierarchy with has one root node, 3 children under the root node and 2 grand-children under each of the 3 child nodes, now if we are at the root Node of the Hierarchy then every profit centre is internal and there are no external profit centres, similarly if we are at the 2nd node (i.e. one of the child nodes) then everything under that node is internal and everything in the other 2 child nodes is external and so on.
This is where the issue starts for us, since on the report if we select the the node we want to see the results for at the query rumtime (i.e. the Customer Exit Variables are invoked at I_STEP=2 and they select the other nodes of the hierarcy if any and group them into either external or internal) then the results are correct. Now if we were to drilldown, i.e. We selected the root node and we drilldown on to see for example of the child nodes then the result are not correct, this becomes apparent when we drilldown further to the grand-child nodes.
One logical explaination is that when we are doing the drilldowns the customer exit variables are not being invoked in the BEx analyzer report and hence they are not grouping the sums for the internal and external profit centres relevent to node selected in the Drill down.
Does anyone have any suggestions regarding how to make this query work properly or show the correct results in BEx Analyzer (ideally), I have considered the Workbooks option but the client does not want Workbooks.
Please let me know if there is a program etc we can customise to ensure that the Customer Exit variables logic is used when the user does a drilldown in the query or any other way to make it work.
Many Thanks
Jack

Hi
Just to aid anyone who is thinking what to do in a similar situation, I am aware that RRI or using workbooks are a couple of good alternatives (just that these are currently not being considered by the client, hence I am asking here).. Also, if someone has Business Objects WEBI then we can satisfy the requirement by creating a new Webi Report for each of the nodes and displaying it (similar to Workbooks but much nicer and faster) or we can get the Webi to execute the variables again during the drilldown... Unfortunately the client is not using Webi either... So the solution has to be in BEx Analyzer / Query designer based...
If you have any thoughts on how I might be able to do what I want to do then please feel free, I am quite confident that I am not the 1st person to come accross this issue and someone somewhere has solved this issue.
Thanks

Population of Customer Exit Variables in Web Template Queries

Hello,
Desired Scenario:
I have three Queries: Q1, Q2, Q3, attached to one Web Template in the same order. Queries Q2 and Q3 have exit variables which are populated from the Input Variable of Query Q1 (these customer Exit variables are mandatory, not available for user input and are populated in STEP=2).
Problem:
Sometimes on execution of the template, Q1 is executed first and then the exit variables are populted (which is OK) BUT sometimes Query Q2 or Q3 is executed first and exit variables don't get populated.
As such, I am not sure of the order these three queries are executed. Please suggest how do I ensure that Q1 is always executed first, followed by Q2 or Q3.
Thanks for your suggestions.
Best Regards,
Sumita

Hi,
The Infoobjects are different in all the three queries. In Q1, the variable is on 0CALWEEK. In Q2, the variable is on XWEEKD (which is reference to 0CALWEEK). IN Q3, it is on XFORWEEK (which is again reference to 0CALWEEK). So, I can't use the same variable in all three queries. But all these variables have to have the Week from to Week To as the input and that input remains same for all three variables.
To prevent the user from entering this week from & to thrice, we populate the other two in customer exit depending on the value input by the user.
So, now I want to know the order in which the queries attached to a Web Template are executed.
Best Regards,
Sumita

BW customer-exit variable in WebItnelligence

Hi all.
Did anybody try to use BW customer-exit variables in WebI report. In documentstion I've found that this type of variable 'supported without user entry', what does it mean?
Thanks.

Hi,
Yes, I have used BW queries in which a customer-exit variable was used and that works fine in WebI.
When you define variables in BW, there is a checkmark saying "Variable is ready for input", i.e. BW customer exit variables are only supported in BO, when this checkmark is not set (which means, that the user can not enter a value directly for the variable).
Best regards,
Jacob

How to identify what customer exit variables are used in which query?

Similar Messages

Maybe you are looking for