How to change a customer exit variable in columns

Hallo Experts,
i have a query with two columns. In the first column is a customer exit variable, who get filled with the actual calyear. In the second column is the same variable with an offset -1.
When i execute the query, in the first column i can see the year 2007 and in the second column i can see 2006. That´s ok.
Now i want to change the year (dynamically) in a filter 2007 in 2005. The result should be in the first column 2005 and in the second column 2004.
What can i do?

Hi Jens,
As I understand the scenario, you have two RKF or selections in column 1 and 2, one is restricted with variable ZYear, the other with the same variable, offset - 1 and variable ZYear provides current year.
I think there is no way to change years dynamically in a filter, but you could solve the issue by refreshing the query and overwrite default value provided by customer exit.
To achieve this, please change variable and check 'Ready for input' in change dialog..
If this shouldn't work, please let me know details a variable definition and customer exit.
Have a nice w/e
Joe

Similar Messages

HOW TO CREATE A CUSTOMER EXIT VARIABLE

<Moderator Message: use lower case letters next time, we don't want you to shout. --> see rules of engagement>
hi,
How to create a customer exit variable..!
in a query designer i have created the customer exit variable ,in the cmod i have created the project
for the exit rsap0001 and kept the break-point....but when i executing the query via BEX-Analyzer
where control not stoping in the break-point..
can any one help me ..what is the approch i need to do.because i new to BI..
Regards,
shahina.....!
Edited by: Siegfried Szameitat on Dec 17, 2008 10:37 AM

Hi Shahina,
1. Create formula variable var1 from to date using replacement path.
2. Create another formula variable var2 for current date using customer exit or you can use standard
formula variable for current date
3. Create calculate key figure ckf using var1 & var2.
ckf = var1 - var2.
Thanks == points
Regards
Sudheer
Edited by: SUDHEER on Dec 17, 2008 10:41 AM

How to make BEX Customer Exit Variable inactive through Customer Exit Code

Hi,
I had created two variables VAR1 and VAR2 as Customer Exit variables
If VAR1 is entered then it should automatically make the VAR2 as NO Entry Variable.
vice versa also required.
can u help me with any code in CMOD so that we can make it inactive through Customer Exit Code.
Thanks in Advance.
Sunil.

What i want is not commenting the code
I want to make the BEX Variable as inactive by using the Customer Exit Code
EX : If value in VAR1 is entered then VAR2 should become automatically inactive.
If value in VAR2 is entered then VAR1 should become automatically inactive.
how can this be done
Thanks in advance.
Sunil

How to assign a Customer exit variable to Key figure

Hi,
I have created a Customer Exit variable to findout no. of days in the month.
But I dont know how to assign that variable to a Keyfigure value. Can you please let me know how to assign it.
Regards
Sankar

Hi Sankar,
From what I could understand, you want to display the output of that key figure for some no. of days of a month (calculated in your customer exit variable)...right ???
If that is the case then you can create a structure in columns. Create a new selection...include your key figure and that customer exit variable in it.
That shall serve the purpose.
Regards
Shalabh Jain
Edited by: Shalabh Jain on Dec 15, 2008 1:46 PM

Changing a customer exit variable in Step 2 which was already set in Step 1

Hello,
i have the following problem.
There are 2 BEx customer exit variables A and B.
Variable A is filled in Step 1 before the user dialog appears.
Variable B is determined in Step 2 in dependence of variable A.
Now i want to change variable A in dependence of user entry althoug it was already filled in step 1. Can i somehow force the variable manipulation in step 2 for a single variable wich has already been set in step 1?
Or is there a way to change all variables at once after they have been set e.g. in step 3?
Regards,
Alexander

Hello Alexander!
It's true: You cannot change values that were entered in step 1. It's a feature This is supposed to make sure that a value that was entered (or confirmed) by the user can never be changed by any piece of coding - customer or SAP. If that possibility existed, then that would create some real issues for reliability and also support.
What is your scenario that you are trying to solve? Maybe there's another way to do it?
Regards,
Christian!

How to identify what customer exit variables are used in which query?

Hi all,
When i happened to check the CMOD transaction code i can find a list of customer exits are used. But i want to know what are those customer exist are used in which query? can anyone let me know the procedure of identifying it.
Thanks a lot
Pooja

hii pooja
check the foll links
Very Urgent: Customer Exit Variable
customer exit variable
MIssing Authorisation for customer exit variable query
Authorization variable or customer exit variables
if it is helpful assign points
thanks.

How to Write a CUstomer Exit for a variable in BEx

Hi,
How to write a customer exit variable in bex Query designer
Do i need developers key for this (If so what type of key do i need so that i can ask basis tean to generate)
Info Object: ZEXP_DTE (Expiry Date)
Variable on ZEXP_DTE :
ZEDTE
Type: Customer Exit
Can any one please tell me how to write a code in CMOD from this (Step-by Step)
Expiry Date > Current Cal Day
As arun said
'l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.'
I want to insert the above code for the above customer exit but as i am new to BW as ABAP please explain me what are the steps involved in CMOD
Thanks

Hi,
To write customer exit for a variable, you require Access key.
Contact your BASIS to get that.
Access Key,BASIS?
To write Customer exit,
User Exits
User Exit for Variable
/thread/809285 [original link is broken]
Hope these helps u...
Regards,
KK.

How to use a customer exit in WebI

Hi expert,
I read from official SAP document that customer exit variable are supported within WebI query.
I created an universe based on a query bex. In this query I use a variable exit for 0calmonth2.
Within the WebI universe I don't see any variable.
How can I use/build a customer exit variable in my WebI query?
System feature: BO 3.1
Many Thanks.
Claudia

Hi,
I havethe same issue, even though I place the user exit variable in Filter section, its not working as expected in WEBI/crystal.
the variable that i have created will assign default value as sysdate.its working fine BW.
Are there any extra settings at BEX/BW level which have to be set before using user/sap exit variables in webi/crystal?
How should the user/customer exit variables be defined in order to get them carried properly to webi or crystal, I mean what should be the properties set for these variables?

Change customer exit variable in selections over Dropdownbox

Hello Experts,
we are on NW2004s, SP12.
I have a customer exit variable (0CALYEAR) in two columns. In the first column the customer exit variable and in the second column the customer exit variable with an offset -1.
Now I want to change the year in a dropdownbox. Under <=BW3.5 that was not possible, only over a how to paper.
I can fill the dropdownbox in the web template but when I change the year, it jumps back to the year selected by the customer exit. How can I change the variable in the new web application designer (2004s) during the navigation? Has any one experience with such a problem?

Hallo Frank,
how can I change the variable values in the WAD?
The parameters of the variable: mandatory, customer exit, reference characteristic: 0calyear, single value, not ready for input.
My coding:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: i_s_var_range   TYPE rrs0_s_var_range.
DATA: i_calyear(4) TYPE c,
        i_duedate(4) TYPE c.
IF i_step = 1.   " Variable nach Selektionsbild bearbeiten
    READ TABLE i_t_var_range
    WITH KEY vnam = 'CALYEAR_X01'
    INTO i_s_var_range.
    i_calyear = i_s_var_range-low.
    i_duedate = '0210'.
    IF sy-datum+4(4) GE i_duedate.
      i_calyear = sy-datum(4).
    ELSE.
      i_calyear = sy-datum(4) - 1.
    ENDIF.
Rückgabetabelle füllen
    CLEAR l_s_range.            " Range-Tabelle füllen
    l_s_range-low = i_calyear.
    l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    APPEND l_s_range TO e_t_range.
ENDIF.
Thank you for your fast reply!
Regards
Jens

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How to use customer exit variable in the report

Dear All,
i want to use a standard customer exit variable in the report properties.
In the Bex Query Designer right hand bottom you will find two buttons "Properties" and "Task". Click on task you will get different option. Choose properties from there and then select "variable sequence tab".
I need to add a standard variable there. How can i achieve it?
Appreciate your early help.

You need to add variable to corresponding charctertic then you can get that varaible for sorting the sequence....
If 0CUST is the varaible then you need to assign it 0CUSTOMER then 0CUST will be available for the sequence.
Edited by: shanthi bhaskar on Apr 2, 2009 5:41 PM

How to insert a code for a function module into a Customer Exit Variable?

I have two Key Figures viz., Net Prchs Rtl, and Net Prchs Unt. Both these Key figures have This Week (TW) and Last Week (LW). There is a variable for This week but there is no variable defined for Last week.
I need to get data in the column LW (Last Week) for both the key figures.
In function module EXIT_SAPLRRS0_001 one of the functions I have is:
Get the previous Fiscal Week
          CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
I need to create a new variable to get values in the Last week column for different key figures and use function 'DATE_TO_PERIOD_CONVERT' in that variable.
Can anyone please explain me the steps as to how to use a function module in a variable so that when the variable is used in a key figure it shows the output.
In other words what I want to know is after creating a Customer exit variable of type Characteristic value how do I refer the above mentioned function moduel and insert the code for the function module into the Customer exit variable that I created.
Thank you.
TR.

Hi Wond,
Thanks a lot for your reply. I understand what you mean but I have never done this before so can you please explain it in a detailed manner. I have the following code:
Get the previous Fiscal Week
          CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
            EXPORTING
              i_date         = ld_date
              i_periv        = lc_periv
            IMPORTING
              e_buper        = ln_poper
              e_gjahr        = ln_bdatj
            EXCEPTIONS
              input_false    = 1
              t009_notfound = 2
              t009b_notfound = 3
              OTHERS         = 4.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            lc_poper = ln_poper.
            CONCATENATE ln_bdatj lc_poper+1(2) INTO wa_e_t_range-low.
            wa_e_t_range-sign = 'I'.
            wa_e_t_range-opt = 'EQ'.
            APPEND wa_e_t_range TO e_t_range.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
I believe I should now use the above code in my customer exit variable. If that's right can you please explain me the steps as to how should I do this so that the variable gets populated.
Thank you.
Regards,
TR.

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

Displaying Customer Exit Variable with derived value from another ODS

Hi All,
Sorry if this question has been answered before. I searched the forums and could not find anything specific to my problem.
I am new to BEx Query. Customer is requesting a variable(s) be created which will be displayed as a column along with other CKF and RKF. This query is a payroll query for US/Canada. This new variable will be based on the user input date for the query. We are to take this date and go look up the actual pay date for the pay period to which the user input date belongs. The pay date is stored in another ODS.
So far, as far as the changes to the Customer Exit ZXRSRU01 are concerned, I would perform the logic when I_STEP = 2. Do a basic selection off the second ODS, derive the pay date, and store in range table E_T_Range.
The data displayed off the user input date is displayed in rows. This is done six times, going back seven days for each row (first row is data for period user entered date to user entered date - 7 days; second row is data for period user entered date - 7 days to user entered date - 14 days; etc ...). For this to happen correctly, I am assuming the variable(s) are to to have characteristic types 'Not ready for input', 'Mandatory', 'Customer Exit', and 'Single Value'.
My question is ... How do I display the six variables in columns (how are they to be defined in the query) and the characteristics I list above, are they correct? Does this need to be a replacement path variable?
Thanks.
Edited by: Amir Hasan on Jun 11, 2009 6:24 PM
Edited by: Amir Hasan on Jun 11, 2009 6:25 PM

Hi Amir,
What i can understand from u r requirement is you want to few columns that will show something like below,
User entered date = x
Period of X to Period of (X-7) Period of X to Period of (X-14).....
This can be done by CMOD for variable only.
Logic steps :
1) Take the user input.
2) Find out the period by using T009B table and store in temp variable.
3) Do day -7 and find out period for the same
4) Assing period of X to ls_range-high range and X-7 to ls_range-low.
Let me know if you have any doubt
Regards,
Viren

Display Error Message in BW Report based on Customer Exit Variable

Hi
I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
    IF i_step = 1.
      <check for condition -- if successful, variable flag = 1, else variable flag = 0>
      IF flag = 0.
        MESSAGE e157(00). "Error Message
      ENDIF.
    ENDIF.
I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??

Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano

How to change a customer exit variable in columns

Similar Messages

Maybe you are looking for