How to assign status profile to components in service order

Hi,
For my business requirement, I want to assign status to individual components planned in the service order. Even though there is a status button on the component tab, there is no config where I can assign the status profile. We can only assign status profile to the order header and the operations and not to components level.
As SAP has provided the status button in the component tab, I am hoping that there is a way to assign the status to the parts planned.
Your help is much appreciated.
Regards,
Ram.

hi all,
It will be helpful if you give any useful tips on maintaining status for the component level in the service order.
regards,
ram.

Similar Messages

  • How to assign status profile to marketing campaign ?

    Dear Friends,
    I am working on Marketing Campaign (SAP CRM 4.0) : I want to customize a new status profile for campaign. I create a new one and I don't know where I assign it to camapign : I searched in SDN and I found a message : "to assign status profile, you have to do when you customize campaign type : Marketing -> Marketing Planning and Campaign Management -> Basic Data -> Define Campaign Types/Objectives/Tactics : in this customizing point, when you define campaign type, here is a status profile field".
    The problem is I did not find any "status profile" field in this customizing point.
    Thanks in advance for your help.

    Hi,
    Pls follow below said path to create User Status profile
    CRM--> Marketing > Marketing Planning and Campaign Management> General Setting --> Change Status Profile for User Status
    Once you create Status profile you can see the same in the profile field of Campaign. You will have to assign this profile in the campaign then you can see the statusses in Change Status field,. But these stausses can not over write the system statusses.
    Hope this will help..
    Rgds
    Mallikarjun

  • How to assign status profile to Business partner

    Hi Gurus,
    in sap crm 7.0 web ui
    i want to restrict particular user group to only" see" accounts it means only  "display"  view this we can achieve through status profile but how it is configured i don't know...can somebody help me understand it.
    Thanks,
    Gaurav
    Edited by: wwgauravshah on Nov 4, 2011 2:21 PM

    hi PP,
    in sap crm7.0 web ui
    1.i have a requirement that once the account is created manually one at a time and while saving bp, a  "opportunity"/lead transaction should get created automatically, this we can achieve with the help of action workflow ...can some body tell me how to configure it...exactly where we can assign action profile to BP.
    2. once sales manager makes any changes to BP master, change update should trigger action workflow to inform all employee responsible automatically about changes.
    please help me it's critical....
    Thanks,
    Gaurav

  • Status profile update in old sales orders

    I recently created a new status profile to suffice a business requirement . Any order created henceforth will have the status profile , BUT for the old orders there will be no status profile .
    Is there any way to update status profiles in old orders via some existing standard function modue?

    Hi Chandrashekhar,
    The program didnt work . I havent gone through the oss notes though.
    Here in my client's system , the status profile functionality was never used . They had a new requirement , for this I had a to create a new status profile, which i have assigned ot the item cat  . We are doing Resource related billing here . Till date all the orders created dont have any status profiles or Statuses. i want all the old orders to have the statuses .
    In other words in the status tab, the object status button itself is missing( invisible) .
    My requirement is for the old orders the object status button , & the statuses in side it should appear.
    The table linkage is ONR00-> JSTO-> JEST->VBAP/VBAK  . there are no entries in all the first three tables, and because of this the object no in the VBAP table is blank .

  • Assign status profile automatically when upload documents in cFolder

    Hello all,
    Is there any way to make the automatic assignment of a state profile to documents that are upload into a collaboration of cFolder?
    At this time we do it manually, but carries to assign the state profile every time we upload a new document.
    Best Regards,
    Jennifer Lohan.

    Hi
    Use FM CFX_API_STATUS_PROFILE_ASSIGN somewhere in any user exit or BADI (let me know the scenario)
    we pass status profile GUID and the Folder / Doc /collaboration GUID into the FM and it attaches the status profile to desired object.
    regards
    Alok

  • How to block status profile in Network Activity

    Dear All,
    Is there any way to block status profile in network activity? Is it possible block base on network type / network profile?
    Cheers,
    Nies

    Hi,
    we can block the status profile by using network type. Define your own order types in txn kot2_opa.same will be displayed in txn opsc with out status profile. assign the same network type in network profile.
    regards,

  • How to get status profile (STSMA) in user exit ILOM0001

    Hi ABAPers,
    I am currently working on user exit ILOM0001 (Check before saving a functional location) and need to get information about status profile (STSMA). I have checked parameters that is imported into this user exit (DATA_IFLO, DATA_IFLO_OLD, DATA_IFLOS) and none of them have STSMA.
    Could anybody help me how to get this field STSMA into user exit ILOM0001?
    Appreciate it.
    Thanks
    Regards
    Hadi

    Dear Kolla,
    Really appreciate your answer, but
    I don't want to generate or make settlement receiver.
    I was building a script in user exit IW010009,
    And the issue is I can not capture the content of field settlement receiver.
    If we want to capture screen field, ex. equnr, we can use structure CAUFVD,
    when i see the technical detail in this field, the structure for settlement is DKOBR, field EMPGE, but i cannot call it on debug.
    Kindly need your help on this issue.

  • Assign Status Profile upon BP Creation

    Hi all,
    Is there a way to default a Status profile and the Initial User profile upon BP creation?
    I have Status Profile: ZTEST which has inside 3 User Statuses:
    1 - Start (Initial)
    2 - Middle
    3 - End
    I need to have ZTEST automatically assigned and "Start" set as the first Status.
    Thank you in advance!
    Ciao!
    Max

    Hi all,
    thanks again for your patience.
    I am sorry to look dumb but I cannot solve my problem yet.
    I have done the following Steps:
    I have created status profile ZTest
    I have defined 3 user statuses with the following settings:
    Status Number - Status - Text - Initial Status - Lowest - Highest - Position - Priority
    1 - DRFT - Draft - X - 1 - 3 - 1 - 1
    2 - APVD - Approved -  - 2 - 3 - 1 - 1
    3 - CANC - Cancelled -  - 3 - 3 - 1 - 1
    I have select Object Type "Business Partner"
    When I go in the Transaction control (for each single User Status) and I press "New", two transactions are displayed:
    Business Partner Usage
    Change (Business Partner)
    And for each of these I can define No influence, Allowed, Warning, Forbidden (the remaining columns, i.e. No action, Set, Delete, do not have the radio button below).
    Moreover, going in the Object type transaction, I find "Object type does not set initial status".
    Whichever combination I try in assigning Transaction control to user statuses, nothing changes in the BP creation transaction (i.e. I can assign any User Status).
    Where am I wrong?
    I cannot find the place where I assign the transaction to the user status.
    I need user status to maintain approvals of Master Data. No need to block transactions etc. What my user expects is to go to BP transaction, press Create Person or Organization, and find there the ZTEST profile with the Draft user status setting AUTOMATICALLY ASSIGNED. So far the ZTEST is to be assigned manually and the initial user status can be selected without restrictions (i.e. I can select Draft, Approved or Cancelled). Anyway, once assigned e.g. Draft, the possible user status changes are correct according to the Low-High status settings.
    Thank you.
    Ciao!
    Max
    Edited by: Massimiliano Lamagna on May 21, 2008 4:40 PM

  • How to restrict status profile for sales order.

    Dear Friends,
    Pl suggest me for follwoing scenario
    ►     As per business process for tender/ institutional sales and exports, the order is complete once the complete delivery and invoicing for the same has been performed.
    ►     It was also observed that a sales order may be modified (material, quantity, price etc) even after complete invoicing of the same has been performed in SAP.
         The requirement is  Possibility to enable a control to restrict any amendments to the sales order after complete delivery and invoicing will be explored as per business requirements.
    Is there any solution above scenario without writing any code.
    Regards,
    Atul
    Edited by: atul thakur on Oct 28, 2009 5:09 AM

    Mr Atul,
    My understanding is, you don't want your user to be able to change the pricing and order quantity once the order is complete, i.e Delivered and Shipped.
    The status profile will not help you in the above scenario, Price/Quantity changes will not come up as Business transactions that can be controlled at Status profile.
    Standard SAP restricts the price changes to a completed item of the order, so no need to worry about this.
    But order quantity can be increased any time.
    So to restrict the user to increase the order quantity you need to use the User-Exits that SAP provided.
    Use the MV45AFZB user-exit program and form  FORM userexit_check_vbap to code this.
    Hope this helps you.
    Regards,
    Aj.

  • Table name which contains status profile of a given process order

    Hi All,
    I created one process order and assigned a status profile for it.
    I need to know which table will contain both these values.
    Ex: If i give process order as an input, then it gives status profile as an output.

    Hi,
    The Table for Status Profile is JSTO.
    But there is no direct link bitween AFKO/AFPO and JSTO.
    Take the help of an ABAPer for this..
    Regards,
    Siva

  • How to assign/unassign a finance document in sales order

    Dear experts,
    At billing tab at line item in sales order, a finance document (a letter of credit in this case) can be assigned. I would like to know
    1. how to assign and unassign it
    2. is it possible to "deactivate a letter of credit" meaning that the letter of credit (already created) cannot be assigned to SD documents.
    The field "Financ.doc.no." in VA02 is disable, so it cannot be changed.
    Your suggestion would be appreciated.

    Hi,
    1. how to assign and unassign it
    If you have created a financial document in the transaction Vx11N, then you can assign that to the sales document item or to the header using that field in the billing tab. You need to have the "Paym.guar.proc." field fill before doing that.
    To un-assign it, you can simple remove the value from that field, before you create a delivery / billing for that sales order line item.
    2. is it possible to "deactivate a letter of credit" meaning that the letter of credit (already created) cannot be assigned to SD documents.
    Yes, in the Financial document type configuration you have a configuration option to setup validity periods. During LC document creation using transaction VX11N, you can give a validity period. Based on the validity dates system will issue an error message, if you try to assign an expired LC.
    If you want to see how this should be configured, check below link;
    [LC|http://www.learnsaptips.com/2011/09/how-to-handle-letter-of-credit-in-sap.html]
    Best regards,
    Anupa

  • How to assign OIM Remote Manager as a service on Win 2003 ?

    I want to assign OIM Remote Manager as a service on Win 2003. I've used instsrv.exe to install srvany.exe and configured Parameters-Application, Parameters-AppDirectory and Parameters-AppParameters string values using parameters from remotemanager.bat file. I've obviously make same configuration mistakes because when I try to start service which I create, I can't see any new java application and Remote Manager log stays calm.
    Would you please give me advices how to configure Windows registry to start Remote Manager as a service.
    Regards
    VeePee

    Hi folks,
    I am a little bit confused about this.
    The metalink note explains how to convert remote manager to a windows service using the java service wrapper (and noted that this approach applies to version 9.0.1)
    It is explicitly declared that OIM’s Remote Manager can run as a Windows Service in OIM 9.1 datasheet (see: http://www.oracle.com/global/kr/download/pdf/ofm/OIM_DATASHEET.PDF) but admin/install guides does not include any configuration guidance about how to do it.
    Is there an easier way for v 9.1 to install remote manager as a service or do we use Java Service Wrapper method for this version also ??
    cheers
    // gurol
    Edited by: Gurol Erdogan on Dec 13, 2008 11:16 AM

  • User status for component item in service order (plant maintenance order)

    Dear experts,
    I cannot find the customizing for assigning a user status (profile) to a component item of a service order.
    IW31 - tab components - mark an entry - click on button "component status"
    Can you help me?
    Best Regards,
    Philipp

    OSS message created. Answer from SAP:
    11.02.2011 - 15:04:46 CET - Antwort von SAP     
    Hello Mr. Miller,
    user status for components are not possible and not intended. I'm
    sorry that I cannot provide better news.
    Best regards
    Reinhard Gruber
    Senior Support Consultant
    AGS Primary Support,
    Business Suite & Technology
    SAP AG
    Therefore this message is closed... but not yet answered
    Edited by: Philipp Miller on Feb 11, 2011 3:28 PM

  • Restrict Deletion of Components from Service Order

    Hello All,
    I noticed that I am able to delete the components from the Components tab of a Service Order even after I have completely issued the components.
    Is there a possible way to prevent deletion of components that have already been issued..?
    I think I can use the Business Transaction RMKL in the system status GMPS. But I guess this will prevent deletion of those components which have not been issued to the service order.
    What would be the best way to prevent deletion of components that have already been issued...?
    Thanks
    Jensibo

    Hello All,
    I don't know if you all received the last reply I posted against this thread... coz I am not able to find it in the thread. I had asked for your comments on any repercussions that may occur because of this config.
    Anyway, the thing is, I followed Narashiman's suggestion and although I did not use the exact config he pointed me to, I used the config in the following nodes:
    1.) Production --> Shop Floor Control --> System Modifications --> Define System Message Attributes
    2.) Production Planning & Process Industries --> Process Order --> System Modifications --> Define System Message Attributes
    and added an entry: Application Area = CN, Message No. = 750-Component & item & was already withdrawn and Category = E.
    Having done this, the system did display the "Component & item & was already withdrawn" message when I tried to delete a component that was issued to a service order, but it did not delete the component from the service order. I was able to save the service order with the issued component still in the components tab.
    Narashiman,
    to specifically respond to your latest reply, I did find the node you pointed me to. But the trouble was that it did not have an entry for CN750 in it. When I tried to add an entry, the system did not let me do so and displayed the error message "Please specify a legal value".
    So I went around opening each system message control node and finally found the two that I mentioned earlier that did work for me.
    Thanks
    Jensi

  • Purchase price for components in service orders

    Dear Fellow SAPPERS,
    I did not find any separate forums for service management nor did I find anything for plant maintenance. As a result I have to post it in this forum since SM/CS uses lot of settings from SD. If you do not find this relevant, please point to appropriate forum for my post.
    Now the problem,
    When users are entering components which are externally procured in the service order compoenent tab, the price is picking up automatically from the purchase inforecord. For some materials which are stocked and real materials we want it this way. But the client is also using generic materials like nuts, bolts, impellers etc where the purchase price is specific to the service order.
    When the users are putting in a real price, the price from the purchase inforecord is overwriting the price the user entered. Then they need to reenter the price which if they forget, the purchase requisition gets a wrong price. We want to stop this overwriting of price from inforecord for certain materials.
    How is this possible? We are exploring the function module CO_ZF_MAT_INFORECORD_READ where the price gets fixed from inforecord. Is modifying the funtion module the only way?
    Thanks in advance for any help.
    Andy.

    Hello,
    Its not that easy unfortunately. The users started complaining about this behavior many months after go live. Before that the indicator Info record update was already checked in the PO. Since these materials are generic with few materials, most of the info records are already created. Now when I delete the inforecords, I get an error message inside the service order that the inforecords are deleted. So I cannot go and delete the inforecords.
    This needs to be done by a program. Anybody has experience modifying the function module CO_ZF_MAT_INFORECORD_READ by implicit enhancement?? Also any links explaining all the features / functionality of implicit enhancement.

Maybe you are looking for

  • How do I remove a program that won't close?

    A program called Macprotector downloaded itself onto my Mac, will not close and cannot be deleted, because it remains open.

  • Adobe 9 Pro - text flow from imported PDF

    We are updating our forms to mailable, fillable PDF documents and there are instances where we need to have two or more lines to fill in and wrap the text. My problem is once i have the text box where i need it to be (as shown above by line #2), i ca

  • Plz help me to understand sql trace

    Hi, i need your help to understand the sql trace and where exactly i should concentrate, i am also going through docs, your help is appreciated, select count(rep) from (select /*+ leading(v1 v2) use_nl_with_index(v2) */ count(v1.val) rep from   (sele

  • "Missing" Icon in Sidebar under PLACES / Sluggish Response (if at all)

    First, the icons in the sidebar "PLACES" for all placed folders on a xServe or other computers are the white-dog-eared missing icon. When clicked, nothing happens. Click it 12 times in a row, really really fast, it might finally connect. Weird. I hav

  • Failed to install a local copy of ias60.jar

    Hello, could anybody help me with this problem. We have installed under Solaris: iPlanet Webserver6.0, Directory Server5.1 and Application Server6.5. In the console it is not possible to select iPlanet Application Server. Message: Class Loader Error: