How to assign the parameter in case condition?

Dear All,
I have one procedure say p1. I want to pass one parameter like d_forcd = 'IN' and ALC_Code in ('11', '21', '31') from this procedure.
In begin part I have one query. Can I pass this paramer in case condition in that query.
If possible please hint me.
Thanks in advance,
Prathamesh.
[pre]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

There is probably a way using CASE, but it seems easier without:
SQL> var param varchar2(10)
SQL>
SQL> exec :param := 'IN'
PL/SQL procedure successfully completed.
PARAM
IN
SQL> SELECT * FROM dual
  2  WHERE  (    :param = 'IN' AND dummy IN ('A','B','X','Y')
  3          OR  NVL(:param,'?') != 'IN' );
D
X
1 row selected.Substitute your actual PL/SQL parameter for the SQL*Plus variable.

Similar Messages

  • How to assign  the parameter value in form2 while passing it from form1

    Hi
    I have two forms,form1 is calling form2 passing a parameter client_id. If for that client_id form2 has any record it is displaying fine but if there is no record for the passing client_id , form2 could not get assigned to that client_id automatically. I want to get that parameter value in form2 so that I can add a new record (detail table). Please help!!
    Sumita

    In your servlet you can read directly the file using request.getInputStream().
    In this way you get the InputStream of the file selected by the user.
    I hope this help you.

  • How to Hide the Parameter field at run time....

    Hi,
    I have a parameter field which behaves differently depending on the User logged in.
    It has the LOV coming from following SQL.
    SELECT customer_name FROM Cust_mast;
    If the user = 'INTERNAL' then the Where clause will be
    WHERE cust_id in('DELL', 'SBC', 'BANK')
    Else there will be no WHERE clause or the parameter field
    should be hidden in the parameter form.
    So my questions are:
    1) How to hide the Parameter field during Run time?
    OR OR OR
    2) How to change the LOV select statement during Run time?
    Thanks.
    Ram.

    Hi Ram,
    Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
    However, what you want can be done in 2 other ways:
    1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
    1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
    <form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
    <select name="selected_customer" onChange="First.submit()" >
    <option value="">Choose a Customer Name
    <rw:foreach id="G_cust_id" src="G_cust_id">
         <rw:getValue id="myCustId" src="CUSTOMER_ID"/>
    <rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
    <option value="<%=myCustId%>"><%=myCustName%>
    </rw:foreach>
    </select>
    </form>
    In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
    Navneet.

  • How to assign the budget to maintenance order

    Dear PM Guru's,
    I like to know the how to assign the budget for a maintenance order. how we control the expenses from a maintenance order. suppose for a small work manangement assigns budget as 2lacs. now i like to restrict if any thing purchased once budget reached to 2lacs system should populates the error message to restrict the creation of Purchase orders / material requisitions and some other issues. Please suggest me how i can map in SAP? if any one have full documentatioin regard this please send through mail.
    thanks in advance to all of PM Guru's.
    regards
    Jalu

    Hi,
    There are different approaches for budget control in PM orders.
    1) Option1: In koab transaction maintain commitment managemen active and in budget profile (oioa) you must tick total values ,annual values,activation type should be 1-automatic activated when budget allocation done. Then distribute budget in PM order through KO22.
    2) Option2:You can also opt for Investment management approach but it is mainly done in case of capital work/projects/internal orders. In this approach you need to activate IM for orders(done by CO people). Investment programs are created and budget distributed through IM52. For details you may consult your FICO consulatnt.
    3) Option3: Fund Management approach enables you to monitor budget-relevant plant maintenance processes. enables you to monitor budget-relevant plant maintenance processes in FM.
    The link between the plant maintenance process and FM is established by entering an FM account assignment (commitment item, funds center, and fund) when you create a plant maintenance order.
    You have to enter the FM account assignment manually. If, however, you have maintained the assignments of FM account assignments to CO account assignments, the system determines the FM account assignment from the cost center of the technical object (functional location, equipment) which is assigned to the plant maintenance order.
    FM takes care of budget related processes from creation of maintenance order till settlement.
    Hope this helps you to decide an appropiate approach.
    Regards,
    S.Basu
    Edited by: S Basu on Nov 10, 2011 5:34 PM
    Edited by: S Basu on Nov 10, 2011 5:34 PM

  • How to get the parameter from Java Script into the Parameter crystal Report

    Hi All,
    Crystal Report is integrated with Oracle 10g. I created the base SQL query for col1, col2, col3 and col4. Java Script pass parameter value (185) to Col1.
    My question is how to create crystal report to make Col1 as parameter and how to get the parameter value 185(Col1) from Java Script. Is there any additional code I need to include in the crystal report?
    FYI.
    Java script sends the right parameter value.There is no issue in java script.
    This is an automatic scheduled process when batch runs, Java script should pass the parameter value and the crystal report should get the value and produce the output report.

    Not sure if this is an application question or if you are trying to hook into Crystal Reports parameter UI? If the later then no option other than report design. If an application then I can move this to the Java Forums.
    If you are asking how to alter the parameters I suggest you remove the Java reference and post a new question so it's not confusing the issue.
    Please clarify?

  • How to pass the parameter of a stored procedure to iReport

    Hi... i don't know how to pass the parameter of the stored procedure to the iReport.
    In the Report Query, i tried
    1. sp_storedprocedure ' value'
    2. sp_storedprocedure +''''+$P{parameter}+''''+
    3. sp_storedprocedure +$V+$P{parameter}++$F($F is a variable having a value of ' (a single quote))may you enlighten us please? thank you

    For M$ SQL server I find that it only works when U use the fully qualified name...
    e.g. catalod.dbo.my_procedure_name 'variable'
    My full query in the Report Query window is something like this:
    EXEC arc.dbo.jasper_Invoice 1000
    Note that you may find that selecting from VIEWS / TABLES fails for no apparent reason and iReport will prompt you with the usual very unhelpful (we have what we "pay" for) prompt, stating that "The document is empty".
    To work around this issue, where a statement like "SELECT * FROM arc.dbo.acc_invoices WHERE Invoice_id=1000" does not work, simply create a PROC, something like:
    CREATE PROC jasper_MyProc (@my_rec_id integer) AS
    SELECT * FROM arc.dbo.acc_invoices WHERE Invoice_id= @my_rec_id integer
    ...to wrap your SELECT statement, then call the PROC
    Edited by: Sylinsr on Apr 22, 2008 4:23 PM

  • How to assign the dynamic value of PV to Sip Header in ICM?

    Hi everybody,
    I would like to ask your help, please. We are working on Temporary IVR Handoff (ICM+CVP). I need to add/modify a customer Sip header in ICM transfer script. The value for that header is dynamic and stored in the one of ICM Call Peripherial Variables (PV9, for examle).
    Is it possible somehow to assign the value of that PV9 to Sip header (Set Variable Call.SipHeader)? I tried to do it but unfortunally without any success. I can assign any static string, but how to assign the value of the PV??? That's the question...
    For static string assignment the syntax of the Set Variable Node (Call.SipHeader) looks like that:
    "IVR-Handoff~add~It's Cisco"
    and it works fine.
    For dynamic value (PV9) I tried:
    "IVR-Handoff~add~Call.PeripherialVariable9" - it add Call.PeripherialVariable9 as a string, but not it's value;
    "IVR-Handoff"~add~Call.PeripherialVariable9 - returns a syntax error;
    Call.PeripherialVariable9 - no Sip header is added.
    What do you think? Is it doable at all?
    Any ideas, answers or examples how to do it would be much appreciated.
    Thank you in advance.
    Dmitriy.

    Hi Senthil,
    Yes! It works, but with the little difference. The right answer is:
    "IVR-Handoff~add~"&Call.PeripherialVariable9
    (Call.PeripherialVariable9 is without quotes, otherwise it insert the name of the variable, but not it's value)
    The other solution is shown here (thanks to Paul Tindall):
    http://developer.cisco.com/web/cvp/forums/-/message_boards/message/15627744?p_p_auth=6psgR8ML
    concatenate("IVR-Handoff~add~",Call.PeripherialVariable9)
    Thank you so much for the idea! I very appreciate your help and vote you.

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • How to run the parameter form example report :pform_report.jsp

    how to run the parameter form example report : pform_report.jsp ?
    I got these error message:
    Reports Error Page
    Sat Oct 18 11:58:24 CST 2003
    javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/�� ' PI with the name 'xml' can occur only in the beginning of the document.'.
    javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/��
    PI with the name 'xml' can occur only in the beginning of the document.'.
         at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:180)
         at examples.tools._pform__report._jspService(_pform__report.java:79)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:66)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:539)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:285)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:771)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:796)
         at java.lang.Thread.run(Thread.java:484)

    repost !
    please help!

  • How to retrieve the parameter names from a JSP page ? Urgent Please

    Hello,
    Can anybody tell me how to retrieve the parameter names from the JSP
    page. (without using getParameterNames() method.)
    The problem with the getParameterNames() method is I get the Jumbled output.
    I need it very badly
    With regards
    Ananth R
    email:[email protected]
    [email protected]

    Dear duffymo,
    My primary intention is to convert the JSP form information into a XML file.
    If I do not get the Parameter names in the correct order how can I maintain
    tag order in XML file.
    For ex: (JSP PAGE VIEW)
    Name--
    FirstName
    MiddleName
    LastName
    Address--
    Street1
    Street2
    City
    Country
    &so on
    (XML File to be generated)
    <Name>
    <FirstName>Value</FirstName>
    </Name>
    <Address>
    <street1>value</street1>
    </Address>
    & so on
    If I use getParameterNames() to get all the parameter names(Which form the tag names in the XML file ) the Enumeration object it returns will not be in the same order as the text fields in JSP.From this I can not construct a meaningful XML file.
    order means: Order of entry on the page, from top to bottom
    That's it
    Waiting for your responses

  • How to assign the downloaded file path in dropdown menu dynamically?

    I have one jsp page. In that jsp page one dropdown menu is there. Dropdown menu contains "save" and "saved content". I download the file using "save" option in menu. That downloaded file path is assigned to the below of the "saved content" option. Then i clicked that downloaded file path, that file will be open.
    My problem is how to assign the downloaded file path in dropdown menu. plz help me.

    dittu wrote:
    My problem is how to assign the downloaded file path in dropdown menu. plz help me.I don't understand your problem.

  • How to Test the individualmapping field and conditions...

    Hi Frnds,
    I done mapping from source to destination as per tech spec in my scenario based on some conditions
    i used node functions also..
    But my question is how to test the every mapping filed , condition is correct or not, what i used node function working properly or not...
    Regards,
    Raj

    Hi
    If you want to check mapping for individual mapping then in design go to test tab and put your data there and then come again on Design tab and click on any target field fro which you want to check mapping then right click on target field in mpping area and click on Display queue and check whether it is expected output for that particular field mapping.
    Regards
    Sami
    Reward points if useful.

  • How to test the parameter new_active_sess_pool_p1

    Dear all,
    How to test the parameter new_active_sess_pool_p1? I have set the new_active_sess_pool_p1=1,and I login db using the user HXL,execute DML and make sure the session is active,now i login the db again and found the new_active_sess_pool_p1 not work,Why?
    Begin
      Dbms_Resource_Manager.Create_Pending_Area();
      Dbms_Resource_Manager.update_Plan_Directive(Plan => 'MAXCAP_PLAN',
                                                  Group_Or_Subplan => 'MAXCAP_PLAN_G1',
                                                  new_active_sess_pool_p1 => 1);
      Dbms_Resource_Manager.Validate_Pending_Area();
      Dbms_Resource_Manager.Submit_Pending_Area();
    End;
    Begin
      Dbms_Resource_Manager.Create_Pending_Area();
      Dbms_Resource_Manager.Set_Consumer_Group_Mapping(Attribute      => Dbms_Resource_Manager.Oracle_User,
                                                       Value          => 'HXL',
                                                       Consumer_Group => 'MAXCAP_PLAN_G1');
      Dbms_Resource_Manager.Validate_Pending_Area();
      Dbms_Resource_Manager.Submit_Pending_Area();
    End;

    Hi,
    The issue have solved,just as run the flowing:
    BEGIN
    DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP (
    GRANTEE_NAME => 'HXL',
    CONSUMER_GROUP => 'MAXCAP_PLAN_G1',
    GRANT_OPTION => TRUE);
    END;

  • How to execute the parametered stored procedure in sql *plus ?

    how to execute the parametered stored procedure in sql *plus ?
    my storedprocedure format
    CREATE OR REPLACE PROCEDURE SMS_SELECTMPLOYEE
    (empDOB out date, empEmpName out varchar2)
    thanks & regards
    mk_mur

    Oh, sorry... making many reading-too-fast mistakes today...
    You can't declare date variables in SQL*Plus (seel help var), but you can cast to varchar2:
    TEST> CREATE OR REPLACE PROCEDURE SMS_SELECTMPLOYEE (empDOB out date, empEmpName out varchar2) IS
      2  d date := sysdate;
      3  e varchar2(10) := 'bob';
      4  begin
      5  empdob := d;
      6  empempname := e;
      7  end;
      8  /
    Procedure created.
    TEST> var d varchar2(30)
    TEST> var n varchar2(30)
    TEST> call  SMS_SELECTMPLOYEE(:d,:n);
    Call completed.
    TEST> print d n
    D
    11/07/06
    N
    bobYoann.

  • In LSMW using BAPI Scenario, how to assign the same file to HEADER and ITEM

    Hi,
    i got a problem when we are in ASSIGN FILES step how to assign the same file to both HEADER and ITEM Structures?

    Hi,
    When defining the file in specify files step check the option 'Data for Multiple Source Structures'.
    Hope it helps.
    Thanks,
    Mahesh

Maybe you are looking for