How to assign values for boolean array in LabVIEW?

I want assign values for boolean array.Iam not able to do that.For each boolen i want to assign each value.Plz help me......
Please Mark the solution as accepted if your problem is solved and donate kudoes
Solved!
Go to Solution.

Hi agar,
values in an array are "assigned" by building an array (using BuildArray) or by replacing values in an existing array (ReplaceArraySubset)!
Good starting point could be this...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

How to assign values for more than one field

Hi,
I have written following code
constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
field-symbols: <L_FIELD> TYPE ANY.
field-symbols: <L_FIELD1> TYPE ANY.
field-symbols: <L_FIELD2> TYPE ANY.
      Assign (fieldname) to <l_field>.
      <L_FIELD> = 'ZB'. " value according to your requirement
      Assign (fieldname1) to <l_field1>.
      <L_FIELD1> = 'ZB'.
while debugging <l_field1> is not assinging (fieldname1).
Im able to assing for (fieldname).
how to assign value for (fieldname1).
plz suggest me to assign values for more than one field.
Regards,
Brahmaji

Hello,
Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
It is KNA1-LIFSD

How do I return a Boolean array from LabView to TestStand?

I am trying to return a Boolean array from Labview to TestStand and have TS evaluate the results. I can do this for arrays of integers or reals but booleans do not work. I tried copying the PassFailTest step type and adding an array of Bool but I couldn't get it to evaluate the array. It simply always passed. How can this be done?
Bob A.

I have thought about evaluating the Boolean data in TestStand but, as you say, this is a lot of work. What I have been doing is to map the boolean data to integers in LV (very easy) and then use the multiple numeric step type to evaluate the integer array automatically. This feels kludgy and I have tried a couple of times to create a "multiple boolean" step type with little success. I'm surprised TS hasn't anticipated a test returning multiple pass/fail results. I do this all the time for production code.
What I have tried is to copy MultipleNumericLimitsTest data type to a custom type and add a BooleanArray with a data type Array of Boolean[0..empty]. Then when I specify module, I select Step.BooleanArray as the value. The last step (that I know of) is to select Step.BooleanArray as the data source in the edit limits window. At this point if I run the test, I get the error "expect numeric, found boolean" (or something similar). When I look at the properties of my custom step type, the Substeps has DoMultiNumericMeasEvaluation as the Post-Step. I believe this is the root of my problem but I can't figure out how to change this to "DoMultiBooleanMeasEvaluation" or similar. Any Ideas?

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Assign values from one array to another

Hi, I am trying to solve a problem that asks that I assign values in the array that is input, which meet a certain criteria, into another array. isFunny will determine if a given integer is funny, countFunnies will determine how many integers in the given array are funny or not. collectFunnies should assign elements from the first array that are funny into the new array. Please take a look at the code, I am at a loss, everything looks good to me.
public class BatchOne
public boolean isFunny(int x) {
if (x%2 == 0) {return true;}
else {return false;}
public int countFunnies(int[] a) {
int count = 0;
for (int funCheck :a) {
if(isFunny(funCheck)) {
count++;
return count;
public int[] collectFunnies(int[] a) {
int count = 0;
int i = 0;
for (int funCheck :a) {
if(isFunny(funCheck)) {
count++;
int[] array = new int[count];
for (int funCheck : a) {
if(isFunny(funCheck)) {
array[i] = funCheck;
i++;
return array;
Thanks,
T

Ok, I am new to programming and posting so likely need some refinement to my posts.
I am using BlueJ to write my code, the above posted is my entire code. It is compiling correctly but when I run, the return was giving me back something strange, I am not sure if I can post a screenshot because it would be hard to explain.
However, upon further review, it seems that there are some intricacies with BlueJ that I am obviously not used to, because when I select to inspect the return, the program seems to be returning an array of values that is in line with my intended goal.
Thank you for your guidance in terms of how to use the forums.
T

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to assign values to server group when you parallelly client-copying

Hello all,
I'm now trying to create server group.
Currently, I use serial process, or default settings, when client-copying.
But I want to implement this in parallel processes.
Due to this, I have to create server group and assign a lot of values to something I don't know!
I want to create a server group, but don't know how to assign values to ones like "Max. requests in queue", "Max. no of logons" and so on.
Could you please advise me how to allocate values to the resourses shown below;
Advanced : 1 *I think "1" is the flag for advanced settings
Max. requests in queue
Max. no. of logons
Max. disp. of own logon
Max. no. of WPs used: *should be the total of SM50, I guess
Min. no. of free WPs
Max. no. of comm. entries
Max. wait time
thanks in advance,
Hozy

Hi,
Would you check this [Parallel Processes |http://help.sap.com/saphelp_sm32/helpdata/EN/e8/df959834ac11d586f90000e82013e8/frameset.htm] and [Parallel processes FAQ|http://www.saptechies.com/ccinfo-parallel-processes-faq/] i hope will get some hint.
Regards
Mohan Rao

How to assign values to Dynamic VO.

Hi All,
I have created a Dynamic VO and i have created 2 attributes(name and age) for it.
Can i create this dynamic VO in Process form request of one of the CO class?
Please let me know how to assign values to it......and display it and the page.?
Thanks,
Sowmya.

Mukul
I am trying to achieve something like below:
Creating a Dynamic VO in my extended controller's ProcessRequest() method and attaching it to a MessageChoiceBean. In ProcessFormRequest() method based on some condition i have to change my Dynaic VO's whereClauseParam and re-execute it so that it will show some different set of values. Below is the code which i used. But after re-executing it my LOV is still showing old set of values. I have posted a query regd. the same but dint get much help. Kindly let me know, if you have any comments. Also Please find the link to my earlier post.
Link: Re: Re-executed dynamic VO not showing new values
* CODE *
ProcessRequest()
ViewObject vo = (ViewObject)am.createViewObjectFromQueryStmt("dummyVO","SELECT MEANING AS VALUE FROM HR_LOOKUPS WHERE LOOKUP_TYPE = :1");
vo.setMaxFetchSize(-1);
vo.setWhereClauseParam(0,"input1");
vo.executeQuery();
OAMessageChoiceBean mesBean=(OAMessageChoiceBean)webBean.findIndexedChild(webBean,"DemoChoiceItem");
mesBean.setPickListCacheEnabled(false);
mesBean.setPickListViewObjectDefinitionName("dummyVO ");
mesBean.setPickListViewUsageName("dummyVO ");
mesBean.setListDisplayAttribute("VALUE");
mesBean.setListValueAttribute("VALUE");
ProcessFormRequest()
If the event is fired
S.O.P(....);
ViewObject vo1 = (ViewObject)am.findViewObject("dummyVO");
vo1.clearCache();
vo1.reset();
vo1.setWhereClause(null);
vo1.setWhereClauseParams(null);
vo1.setWhereClauseParam(0,"input2");
vo1.executeQuery();
S.O.P(....);
Thanks

How to assign Values to nested table and pass as parameter to procedure?

How to assign Values to nested table and pass as parameter to procedure?
Below is the Object and its type
create or replace type test_object1 as object
val1 varchar2(50),
val2 varchar2(50),
     val3 varchar2(50)
create or replace type test_type1 is table of test_object1;
create or replace type test_object2 as object
val1 varchar2(50),
val2 varchar2(50),
     val3 varchar2(50)
create or replace type test_type2 is table of test_object2;
GRANT ALL ON test_object1 TO PUBLIC;
GRANT ALL ON test_type1 TO PUBLIC;
GRANT ALL ON test_object2 TO PUBLIC;
GRANT ALL ON test_type2 TO PUBLIC;
here is the table made of object type:
create table test_object_tpe
sl_num NUMBER,
description VARCHAR2(100),
main_val1 test_type1,
main_val2 test_type2
NESTED TABLE main_val1 STORE AS tot1
NESTED TABLE main_val2 STORE AS tot2;
here is the procedure which inserts values into nested table:
PROCEDURE INSERT_TEST_DATA(sl_num IN NUMBER,
description IN VARCHAR2,
p_main_val1 IN test_type1,
p_main_val2 IN test_type2
IS
BEGIN
FOR rec in p_main_val1.first..p_main_val1.last
LOOP
INSERT INTO xxdl.test_object_tpe
sl_num,
description,
main_val1,
main_val2
VALUES
sl_num
,description
,test_type1 (test_object1(
p_main_val1(rec).val1,
                                   p_main_val1(rec).val2,
p_main_val1(rec).val3
,test_type2 (test_object2( p_main_val2(rec).val1,
                    p_main_val2(rec).val2,
                    p_main_val2(rec).val3
END LOOP;
commit;
END INSERT_TEST_DATA;
here is the anonymoys block which assigns values to the object type and pass values into the procedure:
set serveroutput on;
declare
p_sl_num NUMBER := 1001;
p_description VARCHAR2(50) := 'Testing Val1';
inval1 test_type1 := test_type1();
inval2 test_type2 := test_type2();
begin
inval1(1).val1 := 'testx1';
inval1(1).val2 := 'testx2';
inval1(1).val3 := 'testx3';
inval2(1).val1 := 'testy1';
inval2(1).val2 := 'testy2';
inval2(1).val3 := 'testy3';
CSI_PKG.INSERT_TEST_DATA(sl_num => p_sl_num,
description => p_description,
p_main_val1 => inval1,
p_main_val2 => inval2
end;
Can anybody correct me.
Thanks,
Lavan

Thanks for posting the DDL and sample code but whenever you post provide your 4 digit Oracle version (result of SELECT * FROM V$VERSION).
>
How to assign Values to nested table and pass as parameter to procedure?
>
Well you are doing almost everything wrong that could be done wrong.
Here is code that works to insert data into your table (the procedure isn't even needed).
declare
p_sl_num NUMBER := 1001;
p_description VARCHAR2(50) := 'Testing Val1';
inval1 test_type1 := test_type1();
inval2 test_type2 := test_type2();
begin
inval1.extend();
inval1(1) := test_object1('testx1', 'testx2', 'testx3');
inval2.extend();
inval2(1) := test_object2('testy1', 'testy2', 'testy3');
INSERT INTO test_object_tpe
sl_num,
description,
main_val1,
main_val2
VALUES
(p_sl_num, p_description, inval1, inval2);
commit;
end;
/See Example 5-15 Referencing a Nested Table Element in Chap 5 Using PL/SQL Collections and Records in the PL/SQL doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/collections.htm#CJABEBEA
1. You don't even need the procedure since all it does is a simple INSERT into the table which you can do directly (see my code above)
inval1(1).val1 := 'testx1';There is no element one (1) of 'inval1' since you haven't created any elements yet. You need to EXTEND the collection to add an element
inval1.extend();And then there is an empty element but 'inval1' is a container for objects of type 'test_object1' not for scalars like 'val1', 'val2', and 'val3'.
So you can't do
inval1(1).val1 := 'testx1';You have to create an instance of 'test_object1'
inval1(1) := test_object1('testx1', 'testx2', 'testx3');And so on for the other collection
You don't need the procedure (as my sample code shows) but once you populate the variables properly it will work.

How to assign values to JTable using mysql database

how to assign value to JTable using mysql...

Search the forum. You use the values of the "ResultSet" to create a "DefaultTableModel" which you then add to the "JTable".
I'll let you pick the search keywords to use, which I've suggested above. You can also throw in my userid if you want to specifically look for my solution.

Need help assigning values to an array of Strings

why do i get an error message saying this isn't a statement?
String customer[z] = {"::" + s1 + ":" + s2 + ":" + s3};
what is the correct syntax for assigning values to an array of strings?

help helpArrays in Java are static, meaning their size cannot change once they've been created. Somewhere in your code you need to declare the String array like this,
String[] costumer = new String[10];Now customer has 10 elements (room for 10 strings) and you can do for example this,
int z = 0;
costumer[z] = "string1" + "string2";This means the two strings are added and assigned to element 0 of the array.
If you can't take it from here you need to step back for a while and carefully study a beginners textbook on Java.

How to populate values for a new field in target infoprovider

Hi Experts,
am new to BI. i would like to know on how to populate values for a new field in the target cube with start rotuine.In my case, i have a source infoprovider, which has 3 fields and a target infoprovider, which has 5 fields. i need to populate the new 2 fields in start routine. i dont want to populate using Field routine and am using 3.5 version. please assist with code on how to solve this issue.
Thank you,
Chitra.
Edited by: Chitra_BI on Jun 13, 2011 10:23 AM

Debug the standard code and see where the other fields are getting update. you can use the similar approach and area to code for the new field.
Regards,
Lalit Mohan Gupta.

How to assigne value in sub record type

Dear below mention record type database,now i want to assigne value in payr_rec type,in this recrocrd type have one column party_id,but how can assigne value int this field ,
TYPE group_rec_type IS RECORD(
group_name VARCHAR2(255),
group_type VARCHAR2(30),
created_by_module VARCHAR2(150),
-- Bug 2467872
mission_statement VARCHAR2(2000),
application_id NUMBER,
party_rec PARTY_REC_TYPE := G_MISS_PARTY_REC
please guide.

to get the desired default party_rec attribute value, just assign the "sub-record" attribute defaults as desired; PL/SQL will assign a default (non-null) record as the party_rec value using those attribute defaults:
create or replace package P_Test_It
as
     type party_rec_type is record (
          dummy varchar2(1) default 'X'
     type group_rec_type is record (
          group_name VARCHAR2(255),
          group_type VARCHAR2(30),
          created_by_module VARCHAR2(150),
          -- Bug 2467872
          mission_statement VARCHAR2(2000),
          application_id NUMBER,
          party_rec PARTY_REC_TYPE
end;
set serveroutput on
declare
     rec p_test_it.group_rec_type;
begin
     dbms_output.put_line(rec.party_rec.dummy);
end;
X
PL/SQL procedure successfully completed.Hope it helps.
Gerard

How to assign ZFORM for F.27 Transaction for FI

How to assign ZFORM for F.27 Transaction for FI

Mohan,
All FI related forms can be assigned by OB96 t-code.
and all payment program are RFKORD10 or RFKORD11.so you need to assign your form against them.
please reward if solved.
Amit.

How to bind values for input parameters from an adf table?

Hi,
The version I am using is
Jdev TP4 11.1.1.0.0
I need to know how to bind values for input parameters to methods.
I have created an af:table and I have a button created using a method which is outside the af:table. This method needs to take input parameter values from the column values in the table.
When I have an adf form instead of the table the binding works.
Any help?
Thanks.

Hi Balaji,
you need to bind you table to a backing bean and call a method in the backing bean when you hit the button. In the method you get the selected row from the table and have access to the columns of it. Then call the the method with the parameters.
To bind the table to a bean select the properties of the table, go to behavior section and look for the advanced section 'Binding' property.
Select the small down arrow at the right side and click edit. In the dialog select or create a bean and property for the table.
Go to the button properties, look for 'Action', again select the small down arrow and click 'Edit'. Select the bean which holds the table property and create a method for the button.
The method look like    public void bearbeitenQuelle(ActionEvent actionEvent)
        // Add event code here...
        RichTable lTable = getYourTable();
        Object lData = lTable.getSelectedRowData();
        FacesCtrlHierNodeBinding lNB = (FacesCtrlHierNodeBinding) lData;
        YourViewRow lRow = (YourViewRow ) lNB.getCurrentRow();
    }Hope the get you started
Timo

How to assign values for boolean array in LabVIEW?

Similar Messages

Maybe you are looking for