How to asssign output value in the CSV file for the specific header

Hi,
I am using OpenScript 9.10. The problem I am facing is that, to Write the Output value captured from the application, When i am trying to use the methods "Appen String to File" i am unable to write / assign the out put value below the specific header. Can any one please look into this and post the methods related to Write the output vaues in to the CSV files under specific headers.
Thanks in Advance.
Thanks.,
Siva

Hi Alex,
Thanks for your reply.I need to write the output value under specified parameter name.
for example after creating the sales order,the order number have to write in the CSV file under
OrderNumber column.I tried with appendStringtofille() method,by using this able to write the value under
first column.But i need to write output value under specified columnname(means Header name in the cSV
file).can u please give a reply for the above problem.
Note: In that Csv file i am taking the input vales and also need to write the output values under
specified column(header)
Thanks,
Siva Thota.

Similar Messages

How to Export Address Book contacts as CSV file for Gmail?

Hi
I wish to export some of my Address Book contacts towards Gmail (which i use through the web interface for now) but I don't want to export vcards as i don't trust big brother Google with all the other data (snail mail, phone numbers, birthdays, etc).
I have tried to do the export through Address Book but found no CSV export option.
I've searched the forum for an answer, but to no avail. Some other (paying) websites claim to offer solutions but the "pay before you see" deters me from using them.
Any tip on how to do this would be greatly appreciated. Scripts and software also welcome, if shareware/freeware.
Cheers,
FMN

Thanks for your answer, but gmail's help specifically states one can import contacts in CSV format and i was looking for a simple batch solution.
Here is a link to the relevant gmail page (might be in French - am not a "Froguette" for nothing ;)) about importing:
<http://mail.google.com/support/bin/topic.py?topic=28647>
and the one about importing addresses as CSV files:
<http://mail.google.com/support/bin/answer.py?hl=fr&answer=12119>)
So my question still stands.
FMN
Message was edited by: FroguetteMiNote - wrong link corrected
Message was edited by: FroguetteMiNote

How to create two headers line in CSV file for File Receiver Adpater ?

Hi friends ,
 My scenario is RFC to File. I am downloading file in CSV format . May I know how do i add two line of staic headers Like follows
 CLOCTYP CFLOCTYP
Exe Loc. Type Cus Loc. Type
Best Regards.,
V.Rangarajan

My Input xml will be like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:FileRec_MT xmlns:ns0="urn:tabFile">
 <ContactFile>
 <Contact>
 <Name>Raghavendra</Name>
 <LName>GURU</LName>
 <Company>xxx</Company>
 </Contact>
 </ContactFile>
</ns0:FileRec_MT>
Output in csv as
Raghavendra, Guru ,xxx
My requirement is [ 2 header Lines ]
CLOCTYP CFLOCTYP CFPLACE
Exe Loc.Type Cus Loc. Type Place
Raghavendra Guru xxx
 If multiple rows comes it has to come like
 CLOCTYP CFLOCTYP CFPLACE
 Exe Loc. Type Cus Loc. Type Place
 Raghavendra Guru xxx
 test test yyyyy

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

HT2486 how can I export the contact book data to a csv file for editing?

how can I export the contact book data to a csv file for editing?

You can edit a card right in Contacts. No need to export and re-import.
Select a name and on the right side, click the Edit button:

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
reward points if useful.
regards,
Vinod Samuel.

How to add field value to the standard table

Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod.

How to pass a value to the export parameter for a method (public instance)?

Hello,
I am trying ABAP OO newly. How to pass a value to the export parameter for a method (public instance) called in a report? This *export parameter has a reference type of structure.
Thanks in advance,
Ranjini

Hi,
"class definition
class lcl... definition.
public section.
method m1 imporitng par type ref to data. "now you can pass any reference to the method, but this way you have to maintain this reference dynamically inside the method (you can't be sure what that reference is really "pointing" at)
endclass.
"in program
data: r_lcl type ref to lcl...
create object r_lcl.
call method r_lcl
exporting
par = "pass any reference variable here
Regards
Marcin

How to show the VALUE as the Column Header using SQL query?

Hi
I have a requirement to show the picked value as the column header using SQL query.
Example:
======
SELECT EMPNO FROM EMP
WHERE EMPNO=7934;
Result Should be:
7934
7934

I have a requirement to show the picked value as the column header using SQL query.In sql*plus you can do
SQL> set verify on
SQL> def e = 7934
old: SELECT empno "&&e" FROM emp WHERE empno = &&e
new: SELECT empno "7934" FROM emp WHERE empno = 7934
SQL> SELECT empno "7934" FROM emp WHERE empno = 7934
7934
7934
1 row selected.

Unable to output data to a csv file

hi,
i need to out put some values to a csv file (the one that is mapped to it in the databank). i have used the function
rswapp.setdatabankvalue "name", value
where name is the variable name that is mapped to the field that should be updated by the script and value contain a string value that i want to export...
somehow this code is not working properly.... :(
can someone help me.......
thanks in advance

Hi Priyanshu,
The function setDatabankValue will not write to the .csv file, but it will override the current databank. This would be useful if you had a function in VBA that you would like to use to replace a Databanked parameter. In order to output to the csv you will need to use file i/o functions.
From online help the code below is the basic syntax where "newline" is what is going to be placed in test.txt
newline would be replaced by the new variable that you want to output. Also, be sure that you reference EmpirixUtilities in your VBA. Hope this helps.
Jim
Private Sub RSWVBAPage_beforePlay()
Dim m_util As EmpirixUtilities.FileIO
Set m_util = New EmpirixUtilities.FileIO
Dim resultb As Boolean
Dim mstatus As String
'write a line
resultb = m_util.WriteToFile("c:\Test.txt", "newlineText", Append, mstatus)
Call RSWApp.WriteToLog(CStr(resultb), "", mstatus)
Set m_util = Nothing
End Sub

How to search a .csv file for data using its timestamp, then import to labview

Hi, I'm currently obtaining density, viscosity and temperature data from an instrument, adding a timestamp and writing it to a .csv file which I can view in Excel. This works fine (see attached code) but what I need to do now is to search that csv file for data which was obtained at a certain time, import the temperature, density & viscosity values at this time back into Labview to do some calculations with them, while the data acquisition process is still ongoing.
I've found various examples on how to import an entire csv file into labview, but none on how to extract data at a specific time. Also, whenever I try to do anything with the .csv file while my data acquistion VI is running, I receive error messages (presumably because I'm trying to write to and import data from the .csv file simultaneously). Is there some way around this, maybe using case structures?
If you need to know my skill level, I've been using Labview for a few weeks and prior to that have basically no experience of writing code, so any help would be great. Thanks!
Solved!
Go to Solution.
Attachments:
Lemis VDC-30 read registers MODBUS v5.vi ‏56 KB

It sounds as if you are going about this a little backwards writing to a data file and then extracting from the file but its the weekend so I can't think of an improved way to do it at the moment.
Searching for a specific time with those specific values is quite easy, or if you wanted to select any time then you could interpolate the values to find any value that you want (This is where the contiguous measurement comes in, as you have readings at discrete times you will have to interpolate the values if you want to get the 'measured value' at a time point that is not exactly one of your measured points).
If you can extract the TDMS time column and the T, D & V then simply thresholding and interpolating each of your array/data sets should allow readings at your desired times.
Attachments:
Interpolate.png ‏301 KB

Output chinese character to CSV file in UNIX

Hi
I encountered ABAP dump whenever output chinese character to CSV file in UNIX in ECC6. Error show as
"At the conversion of a text from codepage '4102' to codepage '1100':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported"
The program with coding of statement OPEN DATASET xxxxx FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE. Reason to output to OPEN statement to non-unicode as users would like to open the csv file thru Excel directly. They do not wish to open the text file in Excel. Can Experts please share with me how to overcome the problem?
Thanks
Kang Ring

May be you could give a try with the following code and check
OPEN DATASET xxxxx FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE CODEPAGE '4103'.
Vikranth

How to asssign output value in the CSV file for the specific header

Similar Messages

Maybe you are looking for