How-to "auto-direct" RAS users once connected?

We have an AS5350XM on order, which I'll get to configure (first time for a RAS box for me
Basically, we'd like it that once users are connected to our RAS that either a specific website automatically opens (such as internal corporate portal with webmail), or to have a banner popup with links to those resources.
Is this do-able? How do I do this, and is this the best way to do it?
Thanks

i know it can't host the portal.
i am asking about either a script posy-login that could bring up a website, or bring up a banner with links.....like an sslvpn landing page or a menu.
basically, i'm tasked with restricting ras, and i'm looking for something to "guide" my users to a portal (like herding cattle...)

Similar Messages

How to Check when the user is connected to different desktop.

How to Check when the user is connected to different desktop.Sometimes the user maynot see the theme in the personalize theme list. In that case the person must be using different kind of desktop.How to check, I need a path.And how to apply the theme to that user?
Thanks,
Paturi

Hi,
you can create the new portal desktop from
System Administration => Portal display => Desktop and Display Themes
Select your folder from Portal Content and from its context create new Desktop.
Add The Framework page and the theme to this desktop page.
Go to your folder from Portal Content and from the context of the framework page select add framework page to portal desktop.
Adding Theme to desktop
From Portal content select Theme folder and select the theme right click it and select Add theme to Portal Desktop.
Create rule for the Desktop.
Navigate to System Administration => Portal Display => Desktop and Display Themes Portal Content => Portal Administrators => Super Administrators =>main_rules.
Click Add IF Expression.
create the expression if user = xyz then click on apply
Select the then clause of the if and navigate to your folder where Desktop is created ,Add it and Click Apply.
Save the Changes to the rule.
Hope it helps you.
(reward points if its helpful)
Thanks,
Gunjan

How to make none root user to connect to TCP Port (web ports)

how to make none root user (any user)
to connect to TCP Port 80 or port 81 or any port less than 1024
cause i have web server i want to run and stop service with none root userand on port 80 and port 81
can you help me and give me steps

I believe Solaris 9 also has RBAC control. If so then all you need to do is present the uid with the PRIV_NET_PRIVADDR privilege. See the privielegs(5) manpage for more information on the subject.
This privilege will allow the userid to bind to ports < 1024. You can give a user this privilege either by using usermod (you will probably need the auth_attr(4) manpage as well) after which you need to login again. Or you can try using ppriv to modify the privileges on the users shell.

How to identify which application users are connected to in an rdp session

so we have an rdp gateway with couple of servers acting as brokers. users connect to the RD web access site and see a list of applications. usually these applications are the same but with different parameters like (done through the RemoteApp manager)
app1: C:\Program Files\app.exe arg: C:\appdata\group1\file
app2: C:\Program Files\app.exe arg: C:\appdata\group2\file
i'm trying to find a way to tell which app the users are connecting to at a point with no luck, any help will be appreciated
Noor

Hi Noor,
Thank you for posting in Windows Server Forum.
From your description I can understand that you want the user name with app they have in their session.
You can achieve with below command.
Query process User name
Displays information about processes running on a terminal server. You can use this command to find out which programs a specific user is running, and also which users are running a specific program.
More information:
Query process
http://technet.microsoft.com/en-us/library/bb490798.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

How to Auto-Populate a User Data Picker?

I understand how User Data Pickers work (mostly). We have used them during the shell creation process to allow the creator to specify which users may access the shell and in what user groups they will be placed. This works fine— as the shell is created, these users are added and assigned to their respective groups.
From the documentation, User Data Pickers are supposed to support auto-population, but the system does not allow me to select a suitable source from which to pull. For example, the shell attribute form contains a User Data Picker that contains the name of the PM that was assigned to the shell. Say I have a BP in that shell on which I want the PM’s name to appear. I’m thinking I would place a User Data Picker on the BP and auto-populate that field from the shell attribute user data picker, but uDesigner doesn’t allow the attribute form as source as it does for other DE types. This is important as this field, the PM’s name, must be located on the BP if I’m to use it in a LiveCycle report.
Short of having the user select the name again within the BP, how do I pass the names of shell members that were selected during shell creation using User Data Pickers?
Thanks.

That works! Thanks Rich for clarifying your above posts with the screenshots.
Rich’s solution as it worked for me:
1. Add a User Data Picker to the shell attribute form.
2. Add a DE of DD SYS Medium Name to the shell attribute form. The DD type appears critical here and was my mistake in the past.
3. Auto-populate the DE created in step 2: Source Name-->Data Picker; Source Element-->uuu_user_name (in this case).
4. On the BP, place the same DE as step 2 and auto-populate (or link) it to the same DE on the shell attribute form.
What I didn’t expect:
1. User Data Pickers on BPs cannot reference User Data Pickers on shell attribute forms. Why do we need additional fields to link two other fields of the same type?
2. In operation the auto-populate, setup in step 3 above, occurs immediately as if it were a formula instead of just populating upon the shell creation stup as it would on BP creation.

How to auto login multiple users on boot?

I have mac mini and have users with autostart some programs. But autostart is only when i login on this account.
So now only i can login in to each account and when switch to next account. But it is not good.
I need auto login in to all needed user account. How do that?

Yeah, I'm a big believer in just keeping the machine running, but unfortunately the machine ends up freezing up a few times a month and then it hours of agony as the family complains they can't log into their accounts..etc. I'm going to try updating the hard drive to one of the new Seagate Hybride SSD/HDD drives to help speed the machine up overall. No worries, I've been cleaning off the machine trying to make it run a little smoother (2011 iMac 27", 16GB Ram, 2.97 i7) until I can get a new machine that's a little beffier (the new Mac Pro let's just say).

How to i set up wifi once connected to internet

Tablet shows connected with a good signal but I'm not able to connect to web sites

sundaygirl9872 wrote:
HP 8 POWERED BY CyberLINK
"Cyberlink" is not an Operating System, but perhaps this link might help:
Connecting to a wireless network with an HP Tablet.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Help , how to auto create user account

Hi, guys,
i wanna to know how to auto create user account after use the suppliers' api to create supplier.
i didn't find out how to auto create user account by use ap_vendor_pub_pkg.create_vendor_contact procedure.
how to auto create the user account ?
if you know ,tell me ,pls
best Regards !
Edited by: wanjin on 2013-4-15 下午11:50

Hi Gareth，
I wanna create an Oracle E-business Suite use account ,but how to use fnd_user_pkg.createuser procedure to relation the AP suppliers , not employee suppliers.
the result like N:Purchasing Super User -->supplier-->Contact Directory --> create user
then use "Create User Account for this Contact" to create user account
Regards,
Wanjin

Cannot view history of direct access users connecting to Forefront UAG

Hi, I'm trying to get a list of the users that have been connecting through UAG Direct Access for the past month. I've tried using the methods shown in the technet articles about monitoring of UAG Direct Access either using Powershell or the TMG event loggin
console, using this links:
http://technet.microsoft.com/en-us/library/gg313776.aspx
http://technet.microsoft.com/en-us/library/gg313783.aspx
Using the TMG event logging I see a lot of data from a few days back, even if the filter is set to 30 days, and the log is supposed to be up to 8GB in size before overwriting. The info that it shows is only about sessions to the portal trunk and not direct
access. I know this because on the UAGModuleID column there is no there are no "connected" or "managed" sessions, all are SessionMgr, UserMgr, Filter and RDG mainly.
Through powershell I tried running the following commands after importing the module according to the article:
Get-Directaccessusers -showhistory $true and no results are shown.
Get-Directaccessusers -showhistory $true -starttime "1/6/2015 8:00AM" and no results shown
Get-Directaccessusers -showhistory $true -starttime "1/6/2015" no results
Get-Directaccessusers -showhistory $true -starttime "1/2/2015 8:00AM" -Endtime "1/11/2015 8:00PM" no results
Get-Directaccessusers -showhistory $true -username user = no results.
Get-Directaccessusers -username user = no results
the only command that shows any data is just Get-Directaccessusers but that shows the current Direct Access users, no history.
I checked the Registry HKEY_LOCAL_MACHINE\SOFTWARE\WhaleCom\e-Gap\von\MonitorMgr\sql-builtin-log registry key and it is on 1.
Any ideas on how can I get more history data on the direct access users connecting through UAG?
Please let me know.
Appreciated it.
Thank you!
Eduardo Rojas

Russel,
the problem has been solved now! The final thing missing was just a check in a checkbox.
Below a comprehensive explanation that may help others.
We basically did what you proposed:
We sent a ping from one of the DA-Clients to the TS-Farm members. Since we got replies, we knew that IPv6 communication generally is okay. The answer received was an IPv6. In this scenario we had not yet given any IPv6 to the farm-members! Thus we knew it must
be comming from the DA DNS-Proxy. There are a number of DA-GPOs and one of them is dictating the net portion of the IPv6 to be used in DA-communication, appended by a hex-translation of the target computers IPv4. Therefore the DA DNS-Proxy is taking the GPO-set
IPv6-value, adds the IPv4 in hex and sends it back as an ICMP echo.
With this in place and working correctly one can ping any domain host from any DA-Client. This is configured when initially setting up DA and is handled by the wizzard. Once DA is installed this should all be in place without extra user interaction.
We then took those IPv6 answeres and turned them into fixed IPv6es of the farm-members (each member its own IPv6). So far so good, but this is where it still did not work. Evaluation of the Connection Broker log showed that the redirect reply still included
only the IPv4 of the target farm-member. With that (after a short while) we realized that one has to set a
check in the Connection Brokers Settings, so that the IPv6 LAN-Connection will be used for redirects as well and not only the IPv4 LAN-connection..... How stupid is that? :-)
But as we all know - in dealing with server configuration - you should always "know before you go". But even though you may think you do, when finally arriving you know you didn't.... And that's what we call experinece.
Thanks to Russel for your interest and help.
Brgds Ralf

How many users can connect to a shared drive on a non-server workstation?

How many users can connect to a shared drive on a non-server workstation? We're waiting for our server to arrive and in the interum we're using a Pegasus 2 R6 attached to an iMac running Mavericks as our fileserver. It's been sketchy, the connection to the server being dropped once in a while or the inability to mount the drive after a week of success. The Pegasus we're using now will be attached to a server once it arrives. For now I need to figure what's coausing trouble before I commit to this being our main storage as planned. The data is backed up every night so I'm not worried, its the usability issues. 5-7 people are mounting this drive and opening/saving at the same time. Is there a limit to Maverick's fileserving ability that may be causing this? Understandable if so.

The file server in the client version of OS X has a default limit of 10 simultaneous connections. That limit can be raised by installing OS X Server, or lowered by setting a hidden preference. Assuming you've done neither, you may be able to solve the problem temporarily by stopping and restarting file sharing in the Sharing preference pane, or permanently by setting another hidden preference on the server to break idle connections quickly.
defaults write /Library/Preferences/com.apple.AppleFileServer idleDisconnectOnOff -bool YES
Stop and restart file sharing. To reverse the change, run this command in the same way:
defaults write /Library/Preferences/com.apple.AppleFileServer idleDisconnectOnOff -bool NO
Credit for this solution to ASC member suter:
this file server will not allow any additional users to log on

Wireless Guest Users once authenticated, are able to connect again after disconnection

Wireless Guest Users once authenticated, are able to connect again after disconnection .Clients should not able to connect after the restart or by disabling and enabling the WIFI adapter. But as of now clients are connecting to network . How we can configure this feature in WLC ?

IIRC, if your reboot, disable the adapter or disconnect from the wireless, as long as the session timer or the idle timer does not timeout, then you are still considered as authenticated. If you logout, the wlc logs you off and you will have to log back in. The wierd thing is with iPhones or iPads, they go to sleep mode and you have to log back in to access the guest network. The workaround was to increase the idle timers to a certain acceptable limit to prevent this from happening.
If you disconnect from the guest SSID and leave your client off the network until the idle timer expires, do you get prompted for a login or do you have access again?
Sent from Cisco Technical Support iPhone App

How can I have multiple users on iTunes (in order to connect to a shared office iPad)?

How can I have multiple users on iTunes (in order to connect to a shared office iPad)? Currently each of us has our own iTunes account, so I've made an "all office" Apple ID. However, I can't seem to get two different accounts (my personal and the office) to work on my machine. Even when I login as "the office", my personal library is still showing. Additionally, when I try to setup with a first-time use in iTunes, I get an error that I don't meet the minimum age requirement - no matter what birthdate I enter!

The library exists regardless of which user is logged in.
The only way around that is to create different user accounts on the computer.
There is no way to have 20 unique iTunes users access a shared iTunes under a single login on the computer.

My Iphone has family emails that appear randomly when I try to update apps or generally have to log into my account. It comes up as my sister in laws address. She was once connected to our account when she got her phone at first. How can I remove?

My Iphone has family emails that appear randomly when I try to update apps or generally have to log into my account. It comes up as my sister in laws address. She was once connected to our account when she got her phone at first. How can I remove? There are only two other email address's associated with my account and hers was never one of them! I do have a cloud set up on my phone. I thought this issue had gone away when I canged my passwords, but I just registered a new phone yesterday and its happening again!
Can anyone help me?

Apps are permanently tied to the Apple ID used to purchase them, and all future updates will require you to enter the password associated with this ID, whether you are currently using this ID for purchases or not. If you are being prompted for your sister-in-law's Apple ID when updating it means that there must be one or more apps on your phone that was purchased using her Apple ID. (When she synced with your computer it may have transferred this app to your library. It was subsequently synced to your phone.) The only way to stop the prompt for her ID is to delete these apps from your phone and your iTunes library and repurchase them using your Apple ID.

How can I restrain the user login portal once, in the same time ???

Hi
I need to restrain the user can't repeat to login portal ....
to reduce portal loading
How can I restrain the user login portal once, in the same time???
Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
tks

Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
- Jim

How to Reset Password of User while not connected to Domain using Local Admin Account

How to Reset Password of User while not connected to the Domain using Local Admin Account
(I have the use of a local admin account), and I want to help a user reset their password who has logged in the PC and had their credentials cached, but forgot this password.
In Local Admin Account :
When I go to Control Panel, users, users, manager user ; I cannot see any users in this window except the local admin account, and, so I cannot reset a user password this way.
When I go to lusrmgr.msc, then users ; the local admin account will display only.
If I go to command prompt and type "net user", this will not display any users who have logged in to the computer, and so I cannot use "net user" to reset a password.
I don't want to use any disks, 3rd party programs, or create a VPN connection to the domain. I just want to help a user who calls in and forgets their password.

Hello Keith,
I know this is an old thread but I'm trying to better understand how I could change the domain password while not on the network. What I'm getting from your post is that you:
1. Create a local user account (not a domain user)
2. Login with that local user account
3. Connect to the VPN while logged in as a local user
4. Log out of the local account and login with the domain credentials
Now, my question is based on the assumption that the password created on the local account is the same password that one will use to login to the domain account? Also, is the local user account the same as the domain account?
Thanking you in advance!

How-to "auto-direct" RAS users once connected?

Similar Messages

Maybe you are looking for