How to auto populte selection screen for variant maintained in User Profile

Hi,
I have to auto populate selection screen of Custom Report , with the variant maintained in User profile of User .
Helpful answers would be awarded .
Thanks
Umesh

Hi,
use the PARAMETER-ID clausole of the PARAMETERS / SELECT-OPTIONS instructions.
See help for more informations.
You have to know the parameter id of the field and also the parameters, must be tight to the right data element (example : parameters : p_mara like mara-matnr and NOT parameters : p_mara(18) ).
Otherwise, use "get parameter id" in the initialization event to populate the selection screen.
Bye
Andrea

Similar Messages

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

How to use At Selection Screen for fields whiledealing with Multiple Blocks

Hi Guys,
            In my requirement i am having 4 blocks.1st block with raduio buttons for activating the opther 3 Blocks.
              In these 3 blocks i am having some fields.
       How to do Validation for these fields.?
I am using At Selection-screen on S-SCAD1. I am getting error"S_SCACD1 is neither a selection screen nor a Parameter"
On the top of this" At Selection-screen on S-SCAD1" I am having"AT SELECTION-SCREEN OUTPUT."
                Can anybody tell me how to solve this error?
Thanks,
Gopi.

If you are using your block name than you should use like:
AT SELECTION-SCREEN ON BLOCK S-SCAD1.
Regards,
Naimesh Patel

Selection screen for submit in BSP

Hi Experts,
I have gone throught the link to submit the program in BSP using varients, but i even want to see the selection screen for tht so tht user can post his own values over there.
I tryed SUBMIT with different options but i am not able to see the selection screen for it,pls help me its urgent.
thanks in advance.
Saurabh.

hi,
the submit i have made it the way u told me..before itself..so thts fine..
but value which i get in first.htm of these dates is not getting transfered to the next.htm
thought i am able to get the value through the navigation->set_parameter...
really i feel this issue is bit getting longer....
i guess i used my ful day on it...
thanks for ur great help..but pls let me know is there any proble here in my event handler in first .htm
IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
See if upload is triggered from button
DATA: event TYPE REF TO CL_HTMLB_EVENT.
event ?= CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
    DATA: button_event TYPE REF TO CL_HTMLB_EVENT_BUTTON.
    button_event ?= event.
ENDIF.
CASE event->id.
    WHEN 'ok'.
      DATA: date1 TYPE REF TO CL_HTMLB_INPUTFIELD.
      DATA: date2 TYPE REF TO CL_HTMLB_INPUTFIELD.
     date1 ?= CL_HTMLB_MANAGER=>GET_DATA(
                          request = runtime->server->request
                          name    = 'inputField'
                          id      = 'fromdate'
      IF date1 IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
          EXPORTING
            INPUT         = date1->value
         IMPORTING
           OUTPUT        = p_date.
      ENDIF.
      date2 ?= CL_HTMLB_MANAGER=>GET_DATA(
                          request = runtime->server->request
                          name    = 'inputField'
                          id      = 'todate'
      IF date2 IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
          EXPORTING
            INPUT         = date2->value
         IMPORTING
           OUTPUT        = p1_date.
      ENDIF.
      navigation->set_parameter( 'p_date' ).
      navigation->set_parameter( 'p1_date' ).
      navigation->next_page( 'NEXT' ).
ENDCASE.
ENDIF.
pls help me out expert.
thanks,
Saurabh

Variants on tabbed selection screen for ALV reports

Scenario: We use a tabbed selection screen for an ALV report. We create a variant, make a selection field on the second tab mandatory & save it without a value. When we run the report with the saved variant it does not check that the required field on the second tab is populated before it executes.
Question: How can I code such a check?
Edited by: Alridge Tom on Jul 4, 2008 3:43 PM

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

How to hide input fields on selection screen using variant attribute

Hello all,
I want to know how to hide input fields on selection screen using variant attribute conpletely.
As you know, when setting the attribute of variant "Hide field" checked, the field is temporarily hidden, but when clicking "All Selections(F7)" button on the selection screen, the fileds become appeared.
I want to hide the field completely. Di you know how to do ?
Thank you for your support.
Regards,
Hideki Kozai

Use this attribute hide field and save the variant. Then create transaction for this program setting default variant for parameter Start with variant . The user who runs it will have it by defualt set.
Otherwise
in PBO simply use LOOP at screen and output = 0 for this field. This will ensure that field is invisible in any case.
Regards
Marcin

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How to create the select option for the Plant in screen (Module pool)

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Steps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

Change Layout in Selection Screen for OO ALV-Grid

Hello everyone,
I got a problem regarding layouts for objectoriented ALV Grid. I want to make it possible that user can take the layout for ALV he wants to on the selection screen. So far thats no problem and it works. But there are some little problems which I do not know how to fix them. But first the facts:
(1) I got my parameter for layout
PARAMETER: p_vari TYPE disvariant-variant.
(2) I fill my global layout structure in initialization
INITIALIZATION.
* Variante vorbelegen
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ENDIF.
(3) I got my handling for F4-value help on variant parameter
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
   CALL FUNCTION 'LVC_VARIANT_F4'
     EXPORTING
       is_variant    = gs_variant
       i_save        = 'A'
     IMPORTING
       es_variant    = gs_variant
     EXCEPTIONS
       not_found     = 1
       program_error = 2
       OTHERS        = 3.
   IF sy-subrc <> 0.
     MESSAGE text-m01 TYPE 'S'.
   ELSE.
     p_vari = gs_variant-variant.
   ENDIF.
(4) I give back my parameters content into the variant structure at start of selection
START-OF-SELECTION.
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
   gs_variant-variant = p_vari.
This works all fine but I got some problems when using default variants/layouts. For example I got a default variant only for me. When starting the selection screen it works fine that the default layout was written. It is displayed automatically in the variant parameter. But I want that if i I empty the content (blank it out) from my variant parameter, that report should start with "normal" layout how it was written in the report and NOT with default layout.
When I clear the gs_variant it works like I want it, but then the alv layout button looks like (without functions for layout), because I do not have the reference to my report.
So what to do? :-)
Regards
Michael

Wow that was fast, works great, thanks :-)
I did not use this parameter in set table method but now I fill it dynamically.
Ok next problem, one step harder ;-)
Now I have one selection screen for one ALV-Grid, but four radio buttons which control with which data the ALV gets filled (four different fieldcats, data tables and so on). Each Grid got an own HANDLE so that the layouts can be separated in four categories.
Now I want that by changing the radio button the individual standard layout for the chosen alv grid is getting filled.
This works fine when using it in selection screen output.
AT SELECTION-SCREEN OUTPUT.
   CLEAR gs_variant.
* Layout-Handles individuell für Klausel-Radiobuttons setzen
   IF     p_py IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLPY'.
   ELSEIF p_rh IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLRH'.
   ELSEIF p_aj IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLAJ'.
   ELSEIF p_sr IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLSR'.
   ENDIF.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ELSE.
     CLEAR p_vari.
   ENDIF.
But unfortunately selection screen output is getting passed by EACH changing in the selection screen. This means when I try to clear the default layout in my parameter field, it gets refilled automatically with default layout. If I do a condition around the filling (only if not initial) the default value filling does not work fine in every case, e.g. when clearing the parameters field and then change the radiobutton -> then it does not get filled automatically.

Auto generated selection screen in Modulepool program

Hi Experts!!
How to develop/Desing auto-generated screen for accepting values from the user as criteria for database selections while running a report.
pls. guide me.
Thanks in advance

Use this - two FMS-
here is the code -
FORM extended_selection.
DATA : t_dyn    LIKE rsdsfields OCCURS 0 WITH HEADER LINE.
*Work Areas.
DATA : wa_range TYPE LINE OF rsds_trange,
         wa_ranget TYPE rsds_frange_t,
         wa_line   TYPE LINE OF rsds_frange_t,
         t_selopt TYPE rsds_selopt_t.
*Fields to be Put on the dynamic selection screen
t_dyn-tablename = 'KNA1'.
t_dyn-fieldname = 'KUNNR'.
APPEND t_dyn.
CLEAR t_dyn.
t_dyn-tablename = 'CEPC'.
t_dyn-fieldname = 'PRCTR'.
APPEND t_dyn.
CLEAR t_dyn.
IF ( ( g_sel IS INITIAL ) OR ( t_ranges[] IS INITIAL ) ).
*Initialize Free Selection Mode.
    CALL FUNCTION 'FREE_SELECTIONS_INIT'
         EXPORTING
              kind                     = 'F'
         IMPORTING
              selection_id             = g_sel
         TABLES
              fields_tab               = t_dyn
         EXCEPTIONS
              fields_incomplete        = 1
              fields_no_join           = 2
              field_not_found          = 3
              no_tables                = 4
              table_not_found          = 5
              expression_not_supported = 6
              incorrect_expression     = 7
              illegal_kind             = 8
              area_not_found           = 9
              inconsistent_area        = 10
              kind_f_no_fields_left    = 11
              kind_f_no_fields         = 12
              too_many_fields          = 13
              dup_field                = 14
              field_no_type            = 15
              field_ill_type           = 16
              dup_event_field          = 17
              node_not_in_ldb          = 18
              area_no_field            = 19
              OTHERS                   = 20.
    IF sy-subrc NE 0.
      MESSAGE e717(db).
    ENDIF.
ENDIF.
*Dialog for Selection.
REFRESH t_ranges.
CALL FUNCTION 'FREE_SELECTIONS_DIALOG'
       EXPORTING
            selection_id    = g_sel
            title           = 'Extended Selection'(s12)
            as_window       = true
            start_row       = 5
            start_col       = 20
            tree_visible    = space
       IMPORTING
            field_ranges    = t_ranges
       TABLES
            fields_tab      = t_dyn
       EXCEPTIONS
            internal_error = 1
            no_action       = 2
            selid_not_found = 3
            illegal_status = 4
            OTHERS          = 5.
IF sy-subrc NE 0.
    CHECK sy-subrc NE 2.
    MESSAGE e717(db).
ENDIF.
This will create a dynamic selection screen for you. For more information u can refer to the documentations of those function mdoules.
Hope it solves ur prob.

Background Processing, Selection Screens and Variants

Hi All,
I am having a little trouble Background Processing with Selection Screens and Variants.
When a user runs my report and selects the option of background processing, then they select a checkbox. Once this is checked, they should go and fill in details, press Execute and voila a background process is created. However what is happening is that when i execute it then it asks for a variant. I do not want this to happen. I want the values in the selection screens to be used as default. Here is my code for background processing
FORM START_BACKGROUND_PROCESSING.
CALL FUNCTION 'BP_JOBVARIANT_SCHEDULE'
    EXPORTING
      TITLE_NAME            = 'End Customer Report '
      JOB_NAME              = 'customer_report'
      PROG_NAME             = 'ZSE_SD_SALES'
EXCEPTIONS
    NO_SUCH_PROGRAM       = 1
    OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "START_BACKGROUND_PROCESSING
After the background process is started, all teh data is collated then written to the app server. this is the order
ELSEIF R2 EQ 'X' AND SY-BATCH EQ 'X'.
    PERFORM INITIALIZE_DATA.
    PERFORM SELECT_DATA.
    PERFORM PROCESS_DATA.
    PERFORM GET_END_CUSTOMER_DATA.
    PERFORM WRITE_TO_APP_SERVER.
Any ideas? Points given to those who are helpful

done myeslf

Define selection screen for ldb_process

Hi I'm using the call function ldb_process for KDF(lfa1, lfb1, bsik), the trouble is that the information its different than if i do it on a normal report defining the logical database kdf and selection screen 903.
I find that the difference is because the selection screen, this is because the default selection screen for the kdf database is 1000, and this selection has the "Open items at key date" selection with the current date.
The question is:
How can i define the selection screen 903 using the call function ldb_proces?
Thanks
Pablo Santos

Hi,
You cannot define screen version 903 using function LDB_PROCESS. Instead use table "SELECTIONS" of the function module .
Cheers.

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

How to create Multiple Selection Screen in ALV

Hi,
Can anybody tell me how to create the Multiple Selection screen in ALV reports.
Plse give me code sample if possible.
Thanks in advance
KP

Hi Rich,
thanks for the reply.
I am creating a report. in that for one field, i need to create a multiple selection screen. i mean in the output screen , i need to get the multiple selection screen for that field. in that i should be able to select multiple values, or single values or range of values.
eg: if i take the field kunnr, i should be able to select the multiple kunnar values in the output screen.
Hope my problem is understood.
Thanks
KP

How to auto populte selection screen for variant maintained in User Profile

Similar Messages

Maybe you are looking for