How to avoid E(Exponential) in large decimal numbers?

Large Numbers like 999999999999999998.77 end up being rounded up to higher value or shown in Exponential format like 99E1445 etc.
What needs to be done to retrive the same value as assigned above?

You'll need to use DecimalFormat with a suitable pattern.

Similar Messages

IDCS6 - How do I create tables with large whole numbers and small fractions?

I have a lot of engineering data, dimensions, etc, to enter into an existing IDCS6 Table. I need whole numbers to display full size, but fractions to be small size. I know I can use Open Type and select the Fractions option for each individual fraction, but that would take forever and give me a roaring headache.
How do I create a style (or whatever) that will allow me to just type in the numbers and have them automatically apply small formatting to the fraction portion of the number whenever it sees a "/"?
Along a similar line, I was trying to copy table data from a PDF document from Acrobat X Pro and paste that into an IDCS6 table, so each cell is populated by the appropriate cell data from the PDF file, but didn't have any success. That would really save me a lot of time, because I have many complete tables in PDF format. The data is not protected in the PDF, but I'm having a hard time figuring out how to bring it over to IDCS6.
On a Mac, OSX 10.8.5.
Thanks,
Lou

There are a number of ways to do it, but I make fractions using Dan Rodney's excellent (and free) Proper Fraction script. After it's installed; assign it a keyboard shortcut. Then type your numerator/denominator, select it, and invoke the script. With just a couple keystrokes, you've got a perfectly formatted fraction.
As for the PDF tables, I'd try exporting the host file to RTF and copy/pasting from there. In case you're unaware, to paste values into InDesign table cells, the number of (pre-existing), cells/rows/columns in InDesign must match those copied (from) exactly, and must be pre-selected when the Paste command is executed. So...
1. Set up empty destination table in InDesign which matches the source structure.
2. Select source cells and Copy.
3. In Indesign, select exact same (x, y, qty), range of destination cells and Paste.

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

How to avoid performance problems in PL/SQL?

How to avoid performance problems in PL/SQL?
As per my knowledge, below some points to avoid performance proble in PL/SQL.
Is there other point to avoid performance problems?
1. Use FORALL instead of FOR, and use BULK COLLECT to avoid looping many times.
2. EXECUTE IMMEDIATE is faster than DBMS_SQL
3. Use NOCOPY for OUT and IN OUT if the original value need not be retained. Overhead of keeping a copy of OUT is avoided.

Susil Kumar Nagarajan wrote:
1. Group no of functions or procedures into a PACKAGEPutting related functions and procedures into packages is useful from a code organization standpoint. It has nothing whatsoever to do with performance.
2. Good to use collections in place of cursors that do DML operations on large set of recordsBut using SQL is more efficient than using PL/SQL with bulk collects.
4. Optimize SQL statements if they need to
-> Avoid using IN, NOT IN conditions or those cause full table scans in queriesThat is not true.
-> See to queries they use Indexes properly , sometimes Leading index column is missed out that cause performance overheadAssuming "properly" implies that it is entirely possible that a table scan is more efficient than using an index.
5. use Oracle HINTS if query can't be further tuned and hints can considerably help youHints should be used only as a last resort. It is almost certainly the case that if you can use a hint that forces a particular plan to improve performance that there is some problem in the underlying statistics that should be fixed in order to resolve issues with many queries rather than just the one you're looking at.
Justin

How to avoid tiny rectangles showing up as separate pages in multipage PDFs scanned with Image Capture?

I'm not sure I'm posting this question in the right forum. I am having a scanning problem. I’d appreciate it if anyone could explain what’s happening and suggest how to avoid it or how to fix it after the fact. I’m using a large-format scanner, the HP Officejet 7610, with a MacBook Pro, running OS X Yosemite, v.10.10.1. I am using Apple’s Image Capture app, v.6.6, for scanning software. I am scanning some newspapers, with text and photos on the pages, which are about 11” x 14-3/4” in size. I am making multipage PDFs, each about 10 pp., at a resolution of 300 dpi. Sometimes, when I scan a single page or multiple pages, one or more tiny rectangles of scan show up in the resulting PDF, following a normal page or between pages. In the Acrobat Reader, this tiny rectangle shows up as a curious little box, much less than an inch on a side, and when the PDF is printed out, the tiny rectangle is printed, too, as though it were a separate page. Why is this rectangle showing up in my scans? Is there a way to keep from getting it? After it has been made a part of a multipage PDF, is there any way to get rid of it, keeping the rest of the scan?

I haven't received any replies to the question I recently posted, but one work-around that HP suggested is to use different scanning software. Instead of Image Capture, I used the HP Scan.app that came with my all-in-one printer. I haven't seen those rectangles in my PDFs since switching.

How do i create a contact list in adobe send from my email contact list and how do avoid typing individual email adresses

how do i create a contact list in adobe send from my email contact list and how do avoid typing individual email adresses

Hi [email protected],
The e-mail addresses will not be memorized in Adobe send but will be saved in sent items.
You can use Adobe send outlook plugin to access your email contact list and send.
You can download it here:Send Large Files Online - Share, Control, Track & Manage | Adobe Send
Regards,
Florence

How to avoid merged columns on conversion

Dear All,
I have built some reports using Oracle Developer Report Suit. All is well and working fine but when I send report output to Excel file I am facing following two issues:
1) It goes always to .xls file which is excel 97 format and having limit of maximum 65 thousands rows. Can I convert report to excel 2010 .xlsx file as my reports sometime contains large number of rows?
2) When I convert into excel all information comes normally with proper format but some of report columns occupy multiple excel columns which is causing difficulties in sorting and other function in excel. How to avoid it?
I would be glade to hear from you guys to resolve above issues.
Thanks!

Zia wrote:
1) I have a detail report which contains more than 100 thousands rows. This report is already on menu and available to users. User have got an option on menu that they can select output either 'screen' or 'spreadsheet'. If user select option as 'spreadsheet', report open in excel file but in old excel and truncating excessive rows as .xls have limitation of maximum 65 thousands rows. I do not want to use 'csv' format as directly conversion into excel is more convinient for users. If report contains less than 65 thousands rows then everything is fine and no issues with the report. I hope I could explain real problem this time.65 thousands rows is the limitation of that version u use. I use Microsoft Office 2010 where limitation is 1048576 is a sheet.
One solution is uninstall the present Office version and use Office 2010.
2) Regarding second point, I have a summary report which is all fine and showing desired output in desired format. But when user want output in excel file, some of report columns occupy more than one columns and causing difficulties for users. Actually users do need to convert few reports into excel and work with formulas in excel but in this situation they have to do lots of changes in format before applying formulas. A sample screen shot of a report and converted report in excel file both can be seen on this link [https://skydrive.live.com/?cid=573511bde4261fe6#cid=573511BDE4261FE6&id=573511BDE4261FE6%21120]
I'm not sure about the solution. Most probably you have more space in repeating frame and cause this thing happen. shorter the space in the frame and try.
Hope this will help you.

How to avoid international roaming iphone

Hey everyone,
So I travelled to Colombia recently and in general, had my phone either turned off, or on airplane mode the entire trip. I only used it for one five minute phone call and to listen to music for about five hours accumulated. I was there for about 8 days.
I was told to put the phone on airplane mode, so as to avoid any roaming charges, as my fellow travel companions (who all also owned iPhones), said "that way nothing comes through. No wi-fi, messages, nothing".
So, yes, went with that advice.
Get home, BAM! $255 phone bill.
Now, I was obviously expecting a larger bill than normal, but I have all together $130 in roaming charges. How the eff did this happen?
Excuse me if I'm just a dummy, but I have never owned an iPhone before and this was my first time outside of North America.
I am going to Uruguay next week and obviously, don't want the same to happen.
Any advice on how to avoid this again?
Thanks in advance everyone!

That's not surprising. AT&T's roaming charges are $2.89 per minute, and data is $19.95 per megabyte. Text messages are $0.50 each. If you turned on the cellular without turning off cellular data, then data could have been exchanged while you were using the phone to make a call. It should be itemized on your phone bill to see where the money went. They charge a flat fee for international roaming too.
You don't need to use "airplane mode" however, to prevent the charges. "Airplane mode" disables the radios in the phone from operating entirely. However, you only get charged to for using cellular voice and data. You'll not be charged for using WiFi (at a cafe or hotel, for instance).
The phone's settings section gives you some control over this. See Settings > General > Network and note the "Cellular Data" and "Data Roaming" options. Those should be set to "Off" when you travel. If these aren't off, whenever you are out of "Airplane mode" the phone will receive notifications, look for e-mail, or whatever else you have configured that uses data semi-automatically. Because it's SO expensive (3333% what AT&T charges for domestic data), you don't want ANY data charges.
You can safely leave the cellular service turned on as you are only charged for connected calls and text messages. They are cheaper and can be avoided by not answering the phone.

How to avoid flash player out of memory problems

hi all,
when i am running my swf file i am getting the message saying
that " flash script causes flash player run slowly do u want abort
script ". even it's not the problem of infinite loop.in that i am
passing huge data.
please help me how to avoid this situation.

It is not apparent from your posting, but if you are parsing
large amounts
of XML data you could be faced with this issue if not just a
general
performance issue.
Solution is look at how to consume the data in smaller
pieces. In other
words only download the needed data to deal with the
immediate needs of the
Flash movie and based on user interaction load additional
data. A possible
drawback is where user interaction required the data
instantly such as
rollovers for large numbers of objects.
Another solution is look at streamlining the data such as
reducing nested
levels in XML.
Finally you may have an infinite loop that depends on the
data. With test
data the code runs fine, however certain values trigger an
indefinite loop.
I am working with a few large corporate clients and the
mentality of dumping
data in large vats to the client does not take into
consideration the
technology and performance. It should be the other way round
-- know the
capacity of the technology which is the Flash player.
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"kalyanchakri" <[email protected]> wrote in
message
news:ed42oe$l6j$[email protected]..
> hi all,
>
> when i am running my swf file i am getting the message
saying that " flash
> script causes flash player run slowly do u want abort
script ". even it's
> not
> the problem of infinite loop.in that i am passing huge
data.
> please help me how to avoid this situation.
>
>

Forest trust - security issues and how to avoid

Hi guys,
I have few questions.
1/Planning do Forest trust.We have Forest + Domain functional level at WS 2003 level.
In case of trust what are the security issues and how to avoid them? Meant something like browsing in AD, possible hacking from new destination etc.
2/ What in case that the trust will not be possible create because of security reasons (rejected by other company)? What can be an workaround for that? I have idea with resource forest or ADFS? Any other ideas?
Thanks in advance or for a good link to study about.
Petr Weiner

Other than broad general answers it is difficult to answer this from the negative side. I work in a very large company where we have hundreds of domains with one way trusts in place and I don't believe we have any security issues in place. With
the large numbers of domains we can't operate in any other fashion. We have a user forest and many resource forests. All of our domains and forests are operated and maintained within the company but if you have domains operated by different departments
then you can run into issues on who trusts. Also if you need to have a situation where you need to trust other companies then you start to look at ADFS, you can also use it internally for many applications as well as cloud services. But as I already
mentioned you haven't detailed what exactly is going on so it is hard to try and give you a concrete answer.
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

How to avoid the duplicate values, I do not want the duplicate............

i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

How to avoid Line Items(fields) in BAPI mapping.

Hi
Does any body help me for mapping between header and line items in BAPI..
my scenario is filerfcmail(wokflow)!
File is CSV based :
(ex: 001150,,1123,JERM,08122006,,,
,,,ANN,,01082006,
If you look at example csv file , there is some fields mixed with header and line items. But in RFC header can be 1 to 1 and line item should be 0 to Unbound.
Now my problem is if I sent above example csv file as source :
The payload coming like this(sxmb_moni) :
</HEADERDATA>
- <GLACCOUNTDATA>
- <item>
<COSTCENTER />
<PROFIT_CTR />
</item>
- <item>
<GL_ACCOUNT>738100</GL_ACCOUNT>
<ITEM_AMOUNT>60000</ITEM_AMOUNT>
<COMP_CODE>001150</COMP_CODE>
<ITEM_TEXT>*777-8030-861</ITEM_TEXT>
<COSTCENTER>7320</COSTCENTER>
<PROFIT_CTR>7320</PROFIT_CTR>
<ALLOC_NMBR />
</item>
- <item>
<GL_ACCOUNT>738100</GL_ACCOUNT>
<ITEM_AMOUNT>40000</ITEM_AMOUNT>
<COMP_CODE>001151</COMP_CODE>
<ITEM_TEXT>*777-8030-861</ITEM_TEXT>
<COSTCENTER>6010</COSTCENTER>
<PROFIT_CTR>6010</PROFIT_CTR>
<ALLOC_NMBR />
</item>
<item />
</GLACCOUNTDATA>
You can find there is one more item coming after headerdata with null values. It means map reading first line and one by one , if any field found in rows which belogs to GLAccount(Line item), then it writing one more item after headerdata with that fields only.
Remainig GLAccount data coming as per map after the item .
Can you tell me how to avoid extra line items.
Thanks,
Sankar

Yes, It exist..
I cross checked ..with out givig fileds and giving some fields...its writing another items in after headerdata tag.
hope you understand , what my problem..
See: GLACCOUNTDATA under subnode
item is 0 to unbound in BAPI side, because of this its reading all rows , and if find any field which belongs to GLAccount , then it writing another item tag after headerr data.
Thnaks,
Sankar

HT3228 Please let me know how to avoid receiving the spam into my email accounts on the iPad. It is very annoying! My server puts it in the spam folder...why do I get it on the iPad? Is it avoidable and how?

Please let me know how to avoid receiving the spam (from the spam folder on the server) into my email accounts on the iPad. It is very annoying!
My server puts it in a spam folder and I do not receive it in the Ms Outlook on my desk computer...why do I get it on the iPad? Is it avoidable and how?b

You actually cannot do anything to your ipad when its locked but look at pictures the time and date, you need to restore it, and if it dosent let you restore, good luck chuck Heres how to restore it: Okay, i only know the itunes way soz, lol. Try to connect your ipad to itunes, if it does let you then you should be able to select the device you have in the corner somewhere, once you do that you should see a screen that looks sort of like your ipads setting, you should have a button that says "Restore" click that and your ipad should be restored. If that dosent work you should try going to your regular office depot or something. Good Luck!

How to avoid printing a blank page when there is 'no data' in the report.

how to avoid printing a blank page when there is 'no data' in the report.

try like this
if@section:IND=1
this template
end ifsectionbreak
if@section:IND=2
this template
end if

How to avoid creation of _(file.*), coping from tiger to pc?

how to avoid the creation of this file for ever on a pc environment??
I explain: as i copy any image file, it goes to a spooler directory and that begins instantly to process the file to an OPI server, separating CMYK channels, converting it to high and low resolution...
but as this _(file) is created (same name and extension, but 0Kb and with this _ underscore in the beggining of it name), it begins to process it, and as it really does not exists as an image itself, it crashes the OPI server, forcing us to restart it...
and then, you can imagine the mess, because we're a newspaper, with more than 100 machines logged in two cities simultaneously...
thanks for those who replied last topic I posted about some softwares to delete it! it really worked!!
but now, can anyone have a clue how to DON'T create this file?
thanks in advance!
alex borba
[email protected]

I believe that command is supposed to stop the creation .DS_Store files on servers. Also, I think the plist file gets written to the user ~/Library/Pref, it probably ought to exist both there and in the /Library/Pref folder to really work.
I didn't think the Save for Web option would work for your purposes. I don't believe anything will work except to strip the resource fork off the files before you send them. There is an Applescript that will do it, using a UNIX command in the script. You select a folder, run the Applescript, and it strips the resource fork off all files in the folder and creates a sub-folder called Stripped with resourceless copies of the files in the original:
-- Strip resource fork and metadata in Tiger for one file.
-- If a folder is selected creates an unresourced subfolder of the selected folder
tell application "Finder"
     try
          set aFile to the selection as alias
          set aFolder to the container of aFile
     on error
          display dialog "Select a file"
          return
     end try
     set aFile to the quoted form of POSIX path of aFile
     do shell script "rsync -a " & aFile & " " & aFile & "Stripped; mv " & aFile & "Stripped " & aFile
     update aFolder
end tell
The "do shell script" line must be all a single line in Script Editor. It might wrap funny in the browser. Anyway, copy it, paste into Script Editor, hit compile, and save it as an application. I've only fooled with it a little tiny bit, so I'm not sure whether the rsync process would have any strange effects on complex Photoshop and EPS files or not.
As far as I know the only way to send Mac files without resource forks to a server is to strip them from the files.
Francine

How to avoid E(Exponential) in large decimal numbers?

Similar Messages

Maybe you are looking for