How to avoid links upp/down being propagated to the syslog server?

How do you avoid approx 5 billion links up/down filling up the Syslog server when you connect a couple of hundred Cisco Switches? Apart from setting the Level to Critical.
If possible we would like to gett messages from Warning and upwards in order to be able to pinpoint problems before they happen (or atleast find out what caused them) but not at the cost of having the whole logg drenched in links upp/down! We would also like the link-messages to remain in the switch log.

You can create a logging discriminator to filter out those messages and then specify the discriminator in the logging host definition.
For instance:
logging discriminator FILTER mnemonics drops UPDOWN
logging trap notifications
logging host <syslog_server_address> discriminator FILTER
(Note the discriminator name is limited to 8 characters.)

Similar Messages

My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

Lynne130,
to figure out which users have administrative privileges, open the Users & Groups pane of System Preferences; each user other than the Guest User will be shown with a description of either “Admin” or “Standard”. It’s typical for the first user created on a Mac to be an administrative user.

How to avoid Java Studio Creator 2 to use the regional settings?

How to avoid Java Studio Creator 2 to use the regional settings to select the language that will be used to display the IDE in a certain language?
My country settings are set to Belgium (French) but I want to have my IDE running in English.
What should I change in the defautl properties of JSC2 to avoid this behaviour?
Please, don't tell me to change my regional settings, it is not a valid answer :-)
Best regards,
Abdelkrim BOUJRAF

just modify creator.conf in directory etc/
add: -J-Duser.language=en
in the netbeans_default_options line:
like this:
netbeans_default_options="-J-Duser.language=en -J-Xms96m -J-Xmx384m -J-XX:PermSize=32m -J-XX:MaxPermSize=128m -J-XX:+CMSClassUnloadingEnabled -J-XX:+CMSPermGenSweepingEnabled -J-Xverify:none -J-Dnetbeans.javacore.background_scanning=true -J-Dsunappsrvint.home=\"C:\Program Files\Sun\Creator2\SunAppServer8\""

How do I show applications running in the background? And how do I close them down? In class, the instructor press something but she did not go into Settings. Does anyone know?

How do I show applications running in the background? And how do I close them down? In class, the instructor press something but she did not go into Settings. Does anyone know?

Double-click the home button that will bring up all the applications in the background.
To close then you swipe the application upward and it will close.

How can I run a a class file on the Apache server?

Hi Guys and Gurus,
I am seeking some favor all of experienced gurus, i.e.
How can I run a a class file on the Apache server?
Actually, I want to extract some records from a MySQL Database running on Apache Server. I wrote a program just to select the columns and show them. It is now a Class file, Now how can I run this class file from the Server???
Please advise...
VJ

cross posted
http://forum.java.sun.com/thread.jsp?thread=299137&forum=31&message=1184025

I can no longer sync my touch with my computer. I'm being told that "the sync server failed to sync the iPod."

I can no longer sync my touch with my computer. I'm being told that "the sync server failed to sync the iPod."

Are you sure that these times are still selected to sync in iTunes?
When you connect your iPad to your PC and with iTunes running, select your iPad under the devices button in the upper right corner of the iTunes window. Then click on the Movies tab and make sure that the movies are selected (checked) to sync. Check the playlists in the Music tab as well.

How do I setup permission to transfer files to the MacMini Server. I thought I had it setup to do such but apparently not as I get an error message?

How do I setup permission to transfer files to the MacMini Server. I thought I had it setup to do such but apparently not as I get an error message that I don't have permission?

Both the Mac and Windows units we are usinghave connectivity to the MacMiniServer (on the same network) to open and edit files but cannot transfer new files to the MacMini. FileSharing is on. I went to File Sharing on the MacMini and added the appropriate users and checked FileSharing. Is there something else I needed to do?

URGENT PLEASE:How can I run a a class file on the Apache server?

Hi Guys and Gurus,
I am seeking some favor all of experienced gurus, i.e.
How can I run a a class file on the Apache server? Can I run through an Applet?
How can I set Environment variables in Windows2000 Professional Environment?
Actually, I want to extract some records from a MySQL Database running on Apache Server. I wrote a program just to select the columns and show them. It is now a Class file, Now how can I run this class file from the Server???
The code is here
import java.sql.*;
public class RecordShow {
public static void main(String args[]) {
String url = "jdbc:mysql://localhost/myhost";
Connection con;
String query = "select mytable.column," +
"from mytable " +
"where mytable.column = 1";
Statement stmt;
try {
Class.forName("com.mysql.jdbc.Driver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
try {
con = DriverManager.getConnection(url,
"myuser", "mypassword");
stmt = con.createStatement();
ResultSet rs = stmt.executeQuery(query);
ResultSetMetaData rsmd = rs.getMetaData();
int numberOfColumns = rsmd.getColumnCount();
int rowCount = 1;
while (rs.next()) {
System.out.println("Row " + rowCount + ": ");
for (int i = 1; i <= numberOfColumns; i++) {
System.out.print(" Column " + i + ": ");
System.out.println(rs.getString(i));
System.out.println("");
rowCount++;
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.print("SQLException: ");
System.err.println(ex.getMessage());
Please advise... THANKS
VJ

Ehm, I wasn't referring to you at all... read up,
there's a comment by jschell saying that CGI might be
easier/better for his purposes.
Yep.
I know PHP/Perl/whatever might be easier for some
purposes, but only if you happen to know them and want
to/are able to use them. Ok. But you aren't the one asking the question are you. And the person who asked the question seems to have absolutely no familiarity with Apache or applets.
So whatever they do they are going to have to learn a lot.
And that does indeed suggest that in all likelyhood they have not investigated the alternatives.
And for the vast majority of internet applications, especially with smaller projects (obvious this person is not working with a large team), using perl, or something besides java, is going to be the best business solution. It is simpler, and more secure (probably due to the fact that it is simpler.)
Since this is a Java forum, I
answer under the assumption that people have made a
choice one way or another to use a Java solution to
their problem, so I try to solve it in Java first, and
only when that fails (very seldom) do I turn to other
solutions.You approach problems by arbritrarily deciding to try to solve it in java first and only if you fail do you then look to other solutions?
My first step is to try to figure out which of the various avenues is going to cost less. (And a secondary, but non-trivial concern, is then to convince the customer that just because they have heard of a buzz word like 'enterprise bean' that it doesn't mean that is a cost effective solution.) We must come from different worlds.

Is database link only 'valid' for instances in the same server?

Background: We have 5 servers and installed Oracle 7.3 and 8.
Problem: I managed to create database link to other instance in same server; but not to other server. Error message received was :
ORA-02019: connection description for remote database not found
: TNS server name not found
BUT: I managed it with 'copy from ' command in SQL*plus.
Question: Is database link only 'valid' for instances in the same server?
Thanks! ;o)

user10127912 wrote:
Hi,
We are planning to install second instance of Oracle 11gR2 in Linux server 2.6.39-400.21.1.el6uek.x86_64 x86_64. This is something we never haven done before. If you have such experience, please give us some insight.
The existing instance has all the standard ports:
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Enterprise Manager Console HTTP Port (pterpdb02) = 1158
Enterprise Manager Agent Port (pterpdb02) = 3938
What ports should we select for second listener and enterprise manager? Is there anything else that we need to know before we install the second instance?If you want a second database instance, no additional installation is required - as long as you want to run the second instance at the same version as the the first. Just fire up dbca and create the second database. One installation of Oracle (one ORACLE_HOME) is capable of supporting many database instances, though the same may or may not be said of the hardware it is running on.
As already said, one listener is enough. One listener, running from one oracle home, using the default name of LISTENER, running on the defualt port of 1521, is quite capable of -- indeed, WAS DESIGNED TO, supporte multiple database instances of multiple versions running from multiple ORACLE_HOMEs.
One instance of dbcontrol/dbconsole will support only one database. If you do not use Grid Control (extra installation, extra license) you will need to use the emca utility or one of the options in the dbca utility to configure a seperate instance of dbcontrol for each database. Don't worry about the ports, the creation utility will take care of it and report what it does.

How to configure router to use ip pool on the aaa server for vpn clients

how to configure router to use ip pool on the aaa server for vpn clients . i want to use vpn clients to connect to the router. authenticate using the aaa server username databse and also use the ip pool cretaed on the aaa server. i am not able to find the command on the router pointing to use the pool created on the aaa server. can u some one help me with this command.
sebastan

Hello Sebastan,
what do you use as AAA server (e.g. ACS with TACACS+ or RADIUS) ?
Regards,
GNT

Query: how to avoid multiple POs from being combined into delivery

Hi all,
We are working on an enhancement.
The requirement is:
We need to avoid multiple POs from being combined into one delivery.
Any pointers in this regard would be highly appreciated.
regards
Gurpreet

Hi Murali,
I think your suggestion should solve Gurpreets problem.
I have a query here.
In the copy controls VLTA, defines between sales doc to dlivery doc.
Here we want to maintain copy control between purchasing doc to delivery doc.
How do we achive this?
Also in my view we should write a new combination requirement.
Please check if combination requirement 51 can be used?
Regards
Abhishek

How to avoid that two or more people alter the same Sales Order same time

I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution.
I've already put this thread in the Business One forum and someone suggested to put it in the Business One SDK forum, as there isn't a solution in Business One itself.
So if someone can give me a direction for a solution I would be very pleased.
Best regards,
Tim

Hi Tim,
The only thing that comes close to what you want in standard SBO is Data Ownership. However, this can't stop someone editing a document that is already being edited.
You can't use stored procedures to track which document is open because the SBO_SP_TransactionNotification proc (which is the only one that you are able to customise) is triggered when a document is updated or added (or cancelled or closed) and not when the document is actually being edited in the user-interface.
You could do this by writing an addon that uses the UI API to trap events in the sales order form. In theory, a sales order is being edited if the sales order form is in Update mode (ie in order for the form to be in Update mode, the user must have selected an existing document and changed the value of at least one field). You can trap the event of the user changing a value and then log the user and document in a table. When other users try to edit the same document, you could check the table and then prevent them changing values. When the first user clicks on the update button (or cancels the update or closes the form etc etc) you can remove the lock on the document. However, I have doubts as to how robust it would be. The problem with this kind of locking solution is that you sometimes get 'stranded' locks (eg user was editing a document when their workstation crashed) and the solution can end up being more troublesome than it is worth.
Kind Regards,
Owen

How to prevent ipad apps from being stored in the iCloud and how to bring them back to the iPad

I have an iPad Mini Retina with 128GB of storage. I purchased about a dozen apps and it gets stored in the iCloud and I don't know how to access them on the cloud storage. Plus I have many apps from me itouch that I use and they are also stored on the iCloud.
How can I prevent further apps that I buy from gettting transfer to the iCloud?
How can I download my existing apps that I purchase and that are from my itouch that are stored in the iCloud into my iPad?
How do I access my iCloud storage from my iPad?
Thanks.

You make it sound like apps are disappearing from your iPad and uploading to iCloud. That's not how it works. Maybe somebody (or you) deleted the apps and you don't realize it.
You cannot prevent apps from being stored in iCloud. That is one of the reasons for using iCloud. It will store all of your purchased apps and you will be able to download them if you delete them, or if you buy another device that you want to use the apps on.
If you have apps that are in iCloud, just go to the Purchased Tab in the app store, tap on the Not on this iPad button at the top. Look for any of the apps that you want to download and then tap the cloud icon in order to download them to the iPad. You access your iCloud storage in the purchased tabs of the different stores or in the apps themselves. Any data that is being backed up in iCloud is on the device in the corresponding apps and you don't need to access that data in iCloud. It's at your fingertips already,
Purchased apps do NOT count against your iCloud storage. If you have 60GB of apps, they do not take up the alloted 5GB of free storage that you get. The app data would count against the storage but not the apps themselves.

How to change Labels of Fields being shown in the search help as F0001 etc.

Dear All,
For one of my fields of screen I have been calling a search help configured using F4IF_INT_TABLE_VALUE_REQUEST.
In this function I am returning the field in dynfields. Let me know please how to change the Labels of Field Names being shown in the search help as F0001, F0002 etc....
Regards,
Alok.

Hi Alok,
You can change the Field Label by going to the Data Element and changing the Field Label .
Hope this helps
Regards
Sunil

How to avoid lo-gin prompt while check in the document and saving doc while opening the document?

Hello
I might be missing something to configure or verify but many times I have faced below situation :
When I click on document in document library either its just opens or first save to disc and open.
When I check in a document , its asking for credentials but sometimes doesn't
Can anyone please describe the reason behind above behaviors ? how to avoid saving doc while opening and lo-gin prompt while check in the document?
Thanks and Regards,
Dipti Chhatrapati

It the sharepoint site accessed through firewall
http://support.microsoft.com/kb/2756625
You can try adding below registry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters\AuthForwardServerListAdd the site to Trusted Sites Zone instead of Intranet Go to Control Panel >> User Accounts >> Manage Your Credentials and remove any credentials storedMake sure your office and IE Is same build (64 or 32)http://www.techrepublic.com/blog/smb-technologist/prevent-unwanted-credentials-prompts-with-sharepoint-document-libraries/ checked that 'basic authentication' is unchecked under Central Administration -> Application Management -> Authentication
ProviderOr tryhttp://social.technet.microsoft.com/Forums/office/en-US/45feb132-c304-4521-8b79-42236a829aab/login-prompt-appearing-when-opening-office-documents?forum=sharepointadminlegacy
If this helped you resolve your issue, please mark it Answered

How to avoid links upp/down being propagated to the syslog server?

Similar Messages

Maybe you are looking for