How to configure router to use ip pool on the aaa server for vpn clients

how to configure router to use ip pool on the aaa server for vpn clients . i want to use vpn clients to connect to the router. authenticate using the aaa server username databse and also use the ip pool cretaed on the aaa server. i am not able to find the command on the router pointing to use the pool created on the aaa server. can u some one help me with this command.
sebastan

Hello Sebastan,
what do you use as AAA server (e.g. ACS with TACACS+ or RADIUS) ?
Regards,
GNT

Similar Messages

How to configure https connection using a http proxy in weblogic server

Hi,
I have a proxy in Aqualogic Service Bus that points to a https external service. Our development environment internet access is supported by a http proxy server. The ALSB proxy fails to connect, with the following error message:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380002</con:errorCode>
<con:reason>
Tried all: *1 addresses, but could not connect over HTTPS to server: sitenet43.serasa.com.br port: 443*
</con:reason>
<con:location>
<con:node>RouteTo_ConsultarSerasa</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
I've added the following parameters to jvm args:
-Dhttp.proxyHost=10.128.0.50
-Dhttp.proxyPort=3126
-Dhttp.proxyUser=<someUserName>
-Dhttp.proxyPassword=<somePassword>
Accessing the page in Internet Explorer or Firefox is working fine. Somebody knows any additional configuration to this case?
Thanks in advance
Rogério Cruz

In osb you can configure a HTTP proxy server. Once this is done all BS http/https requests will be through the configured proxy server.
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137225
Manoj

Using encryption on one drive of server for W7 clients

Hi,
I run Win 2008 R2. It has an SSD boot drive, 9 Spinners and a USB attached drive.
The Spinners are 2 & 3 TB drives. Two of the 2TB drives are set up as a spanned volume
One of the spinners has several partitions.
I am considering encrypting the data on that one partition. It contains user folders that are mapped on the clients, which are Windows 7, Windows 8.1 and Linux Mint
I don't want to use bit locker. I'd prefer something "other". I guess that won't be TrueCrypt given the media frenzy about that product lately.
Can someone please provide some guidance as to where to start. Perhaps some advice on whether I should do this (Opinions are fine, as long as they are respectful).
For example...
\\server\joe
\\server\jane
\\server\fred
thanks
tanya

Thanks for your reply.
I was advised by someone else to stay away from bitlocker because if is extremely insecure (and Googling it certainly indicated there were a number of concerns for people using it). For example, the rumor that Microsoft did not impede government agencies
attempts to circumvent the encryption (to put it nicely).
Given that, a third party option is where I thought I would have to go.
But before that, I'm wondering if it is even a good idea? Can any serious agency break any encryption? Is there a performance hit that is going to annoy people? etc.
That was the sort of advice I was after.
thanks
Tanya

How to configure Firefox to use OpenVPN?

summary: I'm running OpenVPN from a Debian client through a Debian jumpbox/server. After I [start the server, start the client] most IP-based applications (DNS, ping, ssh) seem to work from the client, but client's Firefox cannot connect to http://www.whatismyip.com/ (or any other URI). How to configure Firefox to use the VPN? or otherwise fix the problem? or further debug it?
details:
I have a laptop running debian_version==jessie/sid with Firefox version=33.0 which needs to access a compute cluster. The cluster formerly required only an SSL VPN (enabled by a Firefox plugin) to access, but now has several additional requirements, which I seek to satisfy by running the SSL VPN through a jumpbox running an OpenVPN server. The jumpbox is running a "vanilla" Debian 7.7.
I have been using the laptop successfully for a few years without network problems. Currently I have the laptop connected by wire directly to an ISP-supplied modem/router. With `openvpn` NOT running on the laptop, I see:
* `ifconfig` shows no entry='tun0' (just "the usual" entries for 'eth0', 'lo', 'wlan0'), and shows the expected client IP# bound to 'eth0'.
* I can `ping` my jumpbox/server using its real IP#, but cannot `ping 10.8.0.1`
* I can `ssh` to my jumpbox/server using its real IP#, but cannot `ssh 10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
* browsing to http://www.whatismyip.com/ shows my client's IP# (as also shown in `ifconfig`)
Both my client/laptop and server/jumpbox setups are quite generic OpenVPN-wise, and are almost exactly as described on the Debian wiki
https://wiki.debian.org/openvpn%20for%20server%20and%20client
me@jumpbox:~$ date ; cat /etc/openvpn/server.conf
Sat Nov 8 16:49:00 EST 2014
port 1194
proto udp
dev tun
ca /etc/openvpn/ca.crt
cert /etc/openvpn/server.crt
key /etc/openvpn/server.key
dh /etc/openvpn/dh1024.pem
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8" # google public DNS
keepalive 10 120
comp-lzo
user nobody
group nogroup
persist-key
persist-tun
status openvpn-status.log
verb 3
me@laptop:~$ date ; cat /etc/openvpn/client1.conf
Sat Nov 8 16:51:31 EST 2014
client
dev tun
proto udp
remote ser.ver.IP.num 1194
resolv-retry infinite
nobind
user nobody
group nogroup
persist-key
persist-tun
mute-replay-warnings
ca /etc/openvpn/ca.crt
cert /etc/openvpn/client1.crt
key /etc/openvpn/client1.key
ns-cert-type server
comp-lzo
verb 3
up /etc/openvpn/update-resolv-conf
down /etc/openvpn/update-resolv-conf
My jumpbox/server firewall is currently set to forward everything, using `iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE`:
me@jumpbox:~$ date ; sudo iptables -L
Sat Nov 8 16:42:06 EST 2014
Chain INPUT (policy ACCEPT)
target prot opt source destination
fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain fail2ban-ssh (1 references)
target prot opt source destination
RETURN all -- anywhere anywhere
After I start `openvpn` on first the server and then the client, I see no OpenVPN errors on either the server or the client:
me@jumpbox:~$ sudo openvpn --script-security 2 --config /etc/openvpn/server.conf &
Sat Nov 8 17:48:25 2014 OpenVPN 2.2.1 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jun 18 2013
Sat Nov 8 17:48:25 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:48:25 2014 Diffie-Hellman initialized with 1024 bit key
Sat Nov 8 17:48:25 2014 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Sat Nov 8 17:48:25 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:48:25 2014 ROUTE default_gateway=ser.ver.gate.way
Sat Nov 8 17:48:25 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:48:25 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:48:25 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:48:25 2014 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500
Sat Nov 8 17:48:25 2014 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.2
Sat Nov 8 17:48:25 2014 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Sat Nov 8 17:48:25 2014 GID set to nogroup
Sat Nov 8 17:48:25 2014 UID set to nobody
Sat Nov 8 17:48:25 2014 UDPv4 link local (bound): [undef]
Sat Nov 8 17:48:25 2014 UDPv4 link remote: [undef]
Sat Nov 8 17:48:25 2014 MULTI: multi_init called, r=256 v=256
Sat Nov 8 17:48:25 2014 IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
Sat Nov 8 17:48:25 2014 ifconfig_pool_read(), in='TomRoche,10.8.0.4', TODO: IPv6
Sat Nov 8 17:48:25 2014 succeeded -> ifconfig_pool_set()
Sat Nov 8 17:48:25 2014 IFCONFIG POOL LIST
Sat Nov 8 17:48:25 2014 TomRoche,10.8.0.4
Sat Nov 8 17:48:25 2014 Initialization Sequence Completed
me@laptop:~$ sudo openvpn --script-security 2 --config /etc/openvpn/client1.conf &
Sat Nov 8 17:49:12 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:49:12 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:49:12 2014 NOTE: UID/GID downgrade will be delayed because of --client, --pull, or --up-delay
Sat Nov 8 17:49:12 2014 UDPv4 link local: [undef]
Sat Nov 8 17:49:12 2014 UDPv4 link remote: [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:12 2014 TLS: Initial packet from [AF_INET]jump.box.IP.num:1194, sid=25df7af6 0ece4089
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=1, <my config data/>
Sat Nov 8 17:49:13 2014 VERIFY OK: nsCertType=SERVER
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=0, <my config data/>
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Sat Nov 8 17:49:14 2014 [TomRoche] Peer Connection Initiated with [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:16 2014 SENT CONTROL [TomRoche]: 'PUSH_REQUEST' (status=1)
Sat Nov 8 17:49:16 2014 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 8.8.8.8,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: timers and/or timeouts modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ifconfig/up options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: route options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sat Nov 8 17:49:16 2014 ROUTE_GATEWAY lap.top.gate.way/255.255.255.0 IFACE=eth0 HWADDR=la:pt:op:MAC:ad:dr
Sat Nov 8 17:49:16 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:49:16 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:49:16 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:49:16 2014 /sbin/ip link set dev tun0 up mtu 1500
Sat Nov 8 17:49:16 2014 /sbin/ip addr add dev tun0 local 10.8.0.6 peer 10.8.0.5
Sat Nov 8 17:49:16 2014 /etc/openvpn/update-resolv-conf tun0 1500 1542 10.8.0.6 10.8.0.5 init
dhcp-option DNS 8.8.8.8
Sat Nov 8 17:49:16 2014 /sbin/ip route add lap.top.IP.num/32 via lap.top.gate.way
Sat Nov 8 17:49:16 2014 /sbin/ip route add 0.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 128.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 10.8.0.1/32 via 10.8.0.5
Sat Nov 8 17:49:16 2014 GID set to nogroup
Sat Nov 8 17:49:16 2014 UID set to nobody
Sat Nov 8 17:49:16 2014 Initialization Sequence Completed
I then see the following on my client:
* `ifconfig` shows a new entry=`tun0`, which looks correct
* I can `ping` the server using either its real IP# or `10.8.0.1`
* I can `ssh` to the server using either its real IP# or `10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
... but I get no connection if I open a new instance of Firefox and browse to http://www.whatismyip.com/ :-( "Looking up www.whatismyip.com..." succeeds quickly but the status line continues to display "Connecting to www.whatismyip.com..." until the attempt times out. I also get the same behavior (connection timeout) if I open a new instance of Chrome, or if I browse to http://www.whatismyip.com/ with a Firefox opened prior to starting OpenVPN. FWIW I get the same behavior browsing to any URI, including (e.g.) Google.
This is a major problem for me! For the SSL VPN to work, I need to start a Firefox and run it (since the SSL VPN's vendor only supports it on Linux via a Firefox plugin) to access a particular remote-access website. Furthermore I need the SSL VPN to run through the jumpbox/OpenVPN. (Don't ask, it's a long, sad story ...)
Is there something I must do to configure Firefox to use the VPN? Or is there some other way to fix this?
Alternatively, what should I do to further debug the problem? It just seems odd to me that the other services work (e.g., `nslookup`, `ssh`) but Firefox does not. That being said, both Firefox and Chrome fail in this usecase, so the problem might be generic to web browsers.
your assistance is appreciated, Tom Roche <[email protected]>

You're kidding. You have to go through that rigamarole just to put your bookmarks on your own server? Where's the simple FTP option?
Also, the above-linked article has a broken link. The link to the weaveserver (which is what you have to set up on your own server) is no good, and there is no obvious replacement. There are plenty of Weave-related repositories here:
http://hg.mozilla.org/labs
but it's not clear what you need.

How to configure sendmail to use multiple LDAP servers ?

Hi everybody!
I have a sendmail running on Solaris 10 and a LDAP server(192.168.1.9) also running Solaris 10 OS. I have configured the sendmail the following way:
bash-3.00# ldapclient list
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=email,dc=reso,dc=ru
NS_LDAP_BINDPASSWD= {NS1}*********************
NS_LDAP_SERVERS= 192.168.1.9
NS_LDAP_SEARCH_BASEDN= dc=email,dc=domain,dc=ru
NS_LDAP_AUTH= simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= sub
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= default
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_BIND_TIME= 10
I also have another LDAP server (IP 192.168.1.10). It is configured as a replicant of the 192.168.1.9 LDAP server.
The question is how can i configure sendmail to use both LDAP servers ?
The man pages explain how to configure ldapclient to use ONE server and what if want to use two or more? All the settings and the profiles the same.
Thanks in advance =))

Hi!
To add LDAP servers to the Solaris ldapclient, you might use the ldapclient command:
ldapclient manual -v -a defaultServerList="servera.yourdomain.com serverb.yourdomain.com"
But this is only failover, AFAIK the Solaris ldapclient does not perform loadbalancing by itself.
But I am not sure about your sendmail programm. Normally, sendmail has its own configuration
and can be configured to use LDAP e.g. for aliases etc.
Regards!
Rainer

How to configure sap to use gmail as smtp server?

Hi experts,
I need to know how to configure gmail as my smtp server. In the scot transaction I don't see anywhere where to specify whether it is a ssh connection, ports for secure smtp, username, password.
Does anyone know how to configure sap to use gmail as the smtp server?
I've seen some similar threads about this, but they are of no help. Although they are classified as answered, in most cases the reason they are answered is because the person who made the query dropped the cause trying to make it work. I'd like to know for sure is this is possible or not.

Hi Camilo,
You can't set up gmail as your smtp server to handle this. gmail is an email server which generally are based on POP protocol. now for SAP to send mail to gmail, you would need one SMTP capable server which can relay those message received from SAP to configured email address.
As of WAS 6.10 SAP kernel supports SMTP without more components. i.e e-mails can be sent (or received) from the SAP system to each SMTP-compatible mail server. see SAP note 455140 for more details.
Hope this clarifies your doubt.
http://en.wikipedia.org/wiki/SMTP_server
Regards,
Debasis.

How to implement route cipher using java?

Hi guys,,,
I really got a headache solving how to implement route cipher using java lang,,i already got the concept but i really dont get how to implement it using java actually i want to make a presentation of how route cipher works using "adobe flash" but first i will implement it using java coz flash actionscripts are closer to java lang.
Hope you could post some examples or ideas...i would really appreciate it!
thank you so much...

just add an action listener (either keypressed or keytyped) to the frame that you want to record. I did this in NetBeans in about 2 seconds. I can simplify it if you need. As for loging it just write the characters to a file output stream.
public class test extends javax.swing.JFrame {
    /** Creates new form test */
    public test() {
        initComponents();
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" Generated Code ">
    private void initComponents() {
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        addKeyListener(new java.awt.event.KeyAdapter() {
            public void keyTyped(java.awt.event.KeyEvent evt) {
                formKeyTyped(evt);
        pack();
    // </editor-fold>
    private void formKeyTyped(java.awt.event.KeyEvent evt) {
        System.out.println(evt.getKeyChar());
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new test().setVisible(true);
    // Variables declaration - do not modify
    // End of variables declaration
}

How to configure Team explorer 2010 command-line tool in Mac x os. configure shell or system path to include the folder to which (TF client) unzipped archive available.

How to configure Team explorer 2010 command-line tool in Mac x os.
Hot to configure shell or system path to include the folder to which (TF client) unzipped archive available. I am new to Mac X OS. Please help.

Dmitry,
Thanks for the great writeup!
I think I've got my universal instant client libraries built correctly.
I too am using MacBook Pro but I'm getting stuck at building the 32 bit oci8.so
First problem is my pecl download (ver 1.4.1) did not contain a "configure" file so ./configure failed.
I used configure from /sw/....... to try to continue.
Second problem. Using existing configure from /sw/.... I used an appropriate variation of your example command
(./configure --with-oci8=instantclient,/usr/local/oracle/instantclient_10_2 && make).
Things look like everything ran OK but The output does NOT include an oci8.so file
So I guess my question is: Which "configure" should I be using? And if it is not the one on the system under /sw/...
where would I get it since it doesn't come in the pecl download?

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
Thanks in Advance
NTRao

Hi,
There are numerous ways to change the cache size.
You could deploy a vbscript to a collection of the devices.
On Error Resume Next
Dim UIResManager
Dim Cache
Dim CacheSize
CacheSize=20000
Set UIResManager = createobject("UIResource.UIResourceMgr")
Set Cache=UIResManager.GetCacheInfo()
Cache.TotalSize=CacheSize
Or you could use a configuration item.
http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
http://www.nowmicro.com/recast/right-click-tools/
http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?

How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!

Copied from the link provided.
Follow these steps to use your iPhone without a wireless service plan:
Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
Connect the iPhone to iTunes on a computer connected to the Internet.
Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch.

How do I open and use this app after I have paid for my subscription? I previously downloaded Primeir Pro CC for the trial and when I try to open the app it says my trial has ended and there is no other option to sign in and use the app?

how do I open and use this app after I have paid for my subscription? I previously downloaded Primeir Pro CC for the trial and when I try to open the app it says my trial has ended and there is no other option to sign in and use the app?

Remove all current Adobe software. Download Adobe Cleaner Follow instructions.

HT204053 i lost my iPhone recently and how can i retrieve it using my Apple ID? also, how to turn icloud on using Itunes even if the phone's lost?

i lost my iPhone recently and how can i retrieve it using my Apple ID? also, how to turn icloud on using Itunes even if the phone's lost?

Unless you had enabled Find My iPhone on it before it was lost then there isn't any way to locate it (it can only be turned on directly on the phone, it can't be done remotely). If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPhone disabled on it.
If you think that it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

How to generate Webservices.xml using tool in Sun One App Server?

How to generate Webservices.xml using tool in Sun One App Server?

Hi,
The build.xml file should be in a directory from where
you are running the asant command.
To resolve the common.xml file not found error,
open your build.xml and check from which location the common.xml file is incuded.
In the sample application it is four directories above
the directory where build.xml is located.
You can copy the common.xml in the current directory and then change the following in your build.xml
<!ENTITY include SYSTEM "../../../../common.xml">
to <!ENTITY include SYSTEM "common.xml">
Hope this helps.
Get back in case you have more issues

URGENT PLEASE:How can I run a a class file on the Apache server?

Hi Guys and Gurus,
I am seeking some favor all of experienced gurus, i.e.
How can I run a a class file on the Apache server? Can I run through an Applet?
How can I set Environment variables in Windows2000 Professional Environment?
Actually, I want to extract some records from a MySQL Database running on Apache Server. I wrote a program just to select the columns and show them. It is now a Class file, Now how can I run this class file from the Server???
The code is here
import java.sql.*;
public class RecordShow {
public static void main(String args[]) {
String url = "jdbc:mysql://localhost/myhost";
Connection con;
String query = "select mytable.column," +
"from mytable " +
"where mytable.column = 1";
Statement stmt;
try {
Class.forName("com.mysql.jdbc.Driver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
try {
con = DriverManager.getConnection(url,
"myuser", "mypassword");
stmt = con.createStatement();
ResultSet rs = stmt.executeQuery(query);
ResultSetMetaData rsmd = rs.getMetaData();
int numberOfColumns = rsmd.getColumnCount();
int rowCount = 1;
while (rs.next()) {
System.out.println("Row " + rowCount + ": ");
for (int i = 1; i <= numberOfColumns; i++) {
System.out.print(" Column " + i + ": ");
System.out.println(rs.getString(i));
System.out.println("");
rowCount++;
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.print("SQLException: ");
System.err.println(ex.getMessage());
Please advise... THANKS
VJ

Ehm, I wasn't referring to you at all... read up,
there's a comment by jschell saying that CGI might be
easier/better for his purposes.
Yep.
I know PHP/Perl/whatever might be easier for some
purposes, but only if you happen to know them and want
to/are able to use them. Ok. But you aren't the one asking the question are you. And the person who asked the question seems to have absolutely no familiarity with Apache or applets.
So whatever they do they are going to have to learn a lot.
And that does indeed suggest that in all likelyhood they have not investigated the alternatives.
And for the vast majority of internet applications, especially with smaller projects (obvious this person is not working with a large team), using perl, or something besides java, is going to be the best business solution. It is simpler, and more secure (probably due to the fact that it is simpler.)
Since this is a Java forum, I
answer under the assumption that people have made a
choice one way or another to use a Java solution to
their problem, so I try to solve it in Java first, and
only when that fails (very seldom) do I turn to other
solutions.You approach problems by arbritrarily deciding to try to solve it in java first and only if you fail do you then look to other solutions?
My first step is to try to figure out which of the various avenues is going to cost less. (And a secondary, but non-trivial concern, is then to convince the customer that just because they have heard of a buzz word like 'enterprise bean' that it doesn't mean that is a cost effective solution.) We must come from different worlds.

HT4864 can I use the icloud smtp server as the outgoing server for all my other imap accounts?

I have several imap accounts. I want to send all my messages using the icloud server. I put the icloud server as the smtp server for each account but mail is not able to send the messages. The configuration is correct for the smtp iclous server, I checked.
Is there anything I'm missing?
Fausto

The only thing you're missing is that you can't do that. You have to use the correct smtp server for the mail accounts. Email providers generally don't like sending some other company's mail. If you want to send from the icloud servers, use your icloud account when composing.

How to configure router to use ip pool on the aaa server for vpn clients

Similar Messages

Maybe you are looking for