How to Avoid Printing the data twice when the sub report has drill down?

Hello,
I have a sub report that has drill down which is placed in report footer.When i run the report sub report displays the data but when i tried to drill down it displays the same data again.After that i can able to drill down on sub report.Is there any way to avoid
printing the same data twice.
Thanks in advance.

Hi,
If the subreport you're referring to does not grow in size and it does not span multiple pages and you know the size of it, here's what you can do to stop drilling into subreports :
1) Create a text object as large as the subreport (perhaps bigger than it) and fill it with spaces or new lines
2) Place it 'over' the subreport such that it covers the entire area occupied by the subreport
3) The subreport at all times should be smaller than the text object in all dimensions
Now, when you hover the mouse over the subreport, there isn't any magnifying glass for you to drill down into.
If the subreport has further drill-down functionality, then this isn't for you! Because, it just wouldn't allow you click on any objects in the subreport because of the text object eclipsing it. This is the only workaround I know at this point in time and I know a lot of users are looking for this.
I would suggest that you log this as an Enhancement Request at http://ideas.sap.com for our developers to have a look into this.
And finally, I also found an old forum post where Jamie has suggested a way to get this working on the Business Objects Environment. Give it a shot, if that's where the reports are eventually run.
How to disable subreport view
Hope this helps!
-Abhilash

Similar Messages

  • How to avoid printing a blank page when there is 'no data' in the report.

    how to avoid printing a blank page when there is 'no data' in the report.

    try like this
    if@section:IND=1
    this template
    end ifsectionbreak
    if@section:IND=2
    this template
    end if

  • How to stop printing the crystal report with an alert message

    I am having a field called "APPROVAL" in my stored procedure with which I prepared the CR. I want that if the value in the filed is 'A' then only the crystal report should print else it should prompt with an alert message.

    Hi Sreejith,
    Check this helps you:
    Create an alert from "Report  -> Alerts -> Create or Modify Alerts" with below steps:
    1. Provide name of the alert (say Alert1)
    2. Click on X+2 in front of "Message" field and write the Alert message you want to display.
    3. Click on Condition button and write the condition If not({APPROVAL}='A') then true;
    The above Alert will prompt with configured alert message when {APPROVAL} field is not having value of 'A'
    Now, in a formula, write below content and display it where you want to display the APPROVAL field value:
    If {APPROVAL} = 'A' then
              {APPROVAL}
    This formula content will be blank if the value of {APPROVAL} is not 'A'
    Thanks,
    Raghavendra

  • How to avoid printing a balnk page at the end in the Adobe form output

    Hello Experts,
        Can anyone please let me know as how to avoid/delete the blank page at the end of adobe form output.
    I have a master page with header n footer and a body page seperate.
    For ex.. I have 3 line items and i want each line item to be displayed in the new page. I am able to get this functionality . I have set the settings in the paginationb tab of the subform as
    "after " Go to Next content Area" " but an extra page is getting printed at the end. 3 + 1 extra pages total. I want to avoid this blank page. I have checked the Allow page break with in content box but it is still not working.
    Can someone guide me as how to solve this problem.
    Any help is appreciated. Thanks in advance.
    Regards,
    Mahesh

    hey mahesh,
    this normally happens because of triggering a new page manually, what u would have done is that you would be checking for the new line item and when this condition is satisfied , you are triggering a new page , the reason for the last blank page is that the condition gets satisfied ( beacuse the line item number changes from the last line item no to  initial or space).
    This can be handled by doing the following
    By knowing the number of line items by the following stmt.
    describe table itab lines v_lines.
    Now you have the value in v_lines.
    use a counter in ur form and keep it increasing it by 1  ( say v_sno ) ie v_sno = v_sno + 1 in the loop of ur internal table.
    ONLY WHEN V_LINES IS LESS THAN OR EQUAL TO V_SNO , TRIGGER THE NEW PAGE
    this should be along with the condition which u have already put, ie when ever line item no changes
    when both these conditions are satisfied , then only the new page will be triggered.
    Hope it helps,
    Reward if useful,
    Regards,
    KP.

  • How can i print an Excel file when in the full screen mode (no print options on toolbar or right clk

    using Vista, sometimes after creating and saving an excel file, the document is not visible when the file is reopened.
    selecting full screen mode makes the document visible, but the toolbars disappear and the print option does not show up on a right click.  How can i print the document and see the document in some other mode than full screen?

    In order to print, you can click the CTRL+P keys to launch the print dialog,
    Regarding the missing toolbar, try clicking the ALT key to shouw the software menu, then look around under the view option for any available toolbar settings,
    If you cannot find it, i would recommend you to try the Microsoft support forums, as they have some more knowledge with their software features
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • When I try to print a photo from iphoto, I select the photo, click print and the preview shows there is a lot of the photo cut off.  It also prints this way.  How can I print the whole picture?

    When I try to print a photo from iphoto, I click print and the preview shows a lot of the photo cut off.  It also prints this way.  How can I print the whole photo?

    After selecting File > Print, a pop-up window should appear. Select "Customize" and this should take you back into a panel within iPhoto. Towards the bottom, you should see an option for "Layout". Select this option and choose the correct photo orientation.
    Hope this helps!

  • How can I print the date and time in a photo from iPhoto

    How can I print the date and time in a photo from iPhoto

    You want to print them on their own? Can't be done. WIth the photo? Install this
    http://www.iborderfx.com/iborderfx/

  • HT3228 Please let me know how to avoid receiving the spam into my email accounts on the iPad.  It is very annoying! My server puts it in the spam folder...why do I get it on the iPad?    Is it avoidable and how?

    Please let me know how to avoid receiving the spam (from the spam folder on the server) into my email accounts on the iPad.  It is very annoying!
    My server puts it in a spam folder and I do not receive it in the Ms Outlook on my desk computer...why do I get it on the iPad?    Is it avoidable and how?b

    You actually cannot do anything to your ipad when its locked but look at pictures the time and date, you need to restore it, and if it dosent let you restore, good luck chuck Heres how to restore it: Okay, i only know the itunes way soz, lol. Try to connect your ipad to itunes, if it does let you then you should be able to select the device you have in the corner somewhere, once you do that you should see a screen that looks sort of like your ipads setting, you should have a button that says "Restore" click that and your ipad should be restored. If that dosent work you should try going to your regular office depot or something. Good Luck!

  • How to avoid printing of void cheques

    Hi Friends,
    In the check printing program FBZ5,  whenever there are more than 25 line items, the first two cheques are getting cancelled and the third cheque is getting printed and thereby wasting the first two cheques.
    I would like to know, how to avoid printing of such cancelled cheques.
    TIA.
    Regards,
    Mark K

    hi
    good
    you can use like this when you r going to FBZ5 tcode in the right hand side there is a tab called Output Control, there if you check the test print out it ll give you this result
    Indicator: Test Print
    If you select this indicator, the print program carries out a test print (for purposes of fine-tuning the printer output) before printing the actual payment media.
    so before taking the original print out you can able to understand which is going to be cancel and which one is going to print .
    Reward Point If Helpful
    thanks
    mrutyun^

  • How can I print in black/white only a document that has colors in the original?

    How can I print in black/white only a document that has colors in its original. I don't need the print out to be in color, and I don't want to waste the color ink.

    It depends on your printer and the application you are using.
    In some applications you can choose color vs. greyscale/black&white when you do File > Print.   PowerPoint is one example of an application that allows this choice.
    Otherwise, you can usually select greyscale at the time you print the document.  Do File > Print. In the resulting dialog box, there should be an item called Copies & Pages (in Word and other applications) or Preview (in Preview).  Click it.  In the resulting list, you should then see an option called Printer Features.  Click it.  Then you should see an option called Printout Mode.  Usually one of the modes is Greyscale or Black & White.  Select it.  Then Print.
    This can also depend on your printer.  Exactly what make/model printer are you using?   And what kind of document are you trying to print (Word, PPT, JPEG, etc)?

  • How do I print the Outline view only?

    How do I print the black and white Outline view only? I pasted the Outline to a new layer, hid all other layers, but the color Preview view still printed.

    Clifford Peterson wrote:
    Re my cropping, I do have one problem.
    When I try to create multiple rectangles to define my cropping areas, 
    the rectangle I just made disappears when I make another one.
    I can only make one rectangle at a time.
    You've probably got your stroke and fill both set to none or to.... enable at least one of them... in a colour other than white

  • How do I print the total number of pages in report, like Page 1 of 5?

    Hi
    How do I print the total number of pages in report, like Page 1 of 5?
    thanks,
    kiran.M

    Hi,
    Check for the below code:
    *Declare a variable
    DATA L_PAGE_COUNT(5) TYPE C.
    *Copy this code to the end of program
    *Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
    READ LINE 1 OF PAGE SY-INDEX.
    REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
    MODIFY CURRENT LINE.
    ENDDO.
    TOP-OF-PAGE.
    WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
    You will find your solution in below thread with code:
    Total Pages in Basic List
    Rgds,
    Shakuntala

  • How can I print the calendar in my IPhone?

    How can I print the calendar in my IPhone? I use to be able to sync it to Outlook, but that option is not available when I sync.

    download and use the app called CalPrint

  • How can I print the invoice for my IPad Order?

    I bought the IPad Air from Apple a week ago and it has been delivered yesterday.  I am wondering how I could print the Invoice for that purchase. 
    I didn't make the AppleID when I bought it, so, my order is not linked to my AppleID.  I managed to go onto the "Print Invoice" link and clicked on the "Print Invoice" link.  But it keeps asking to fill in the AppleID.  Since I don't have one, I made the AppleID.  But when I logged in and go to the "Order History" page, it says, "you don't have any recent order".
    Please see the screenshot belows.  Could you please guide me how I could print the Invoice of my order?  Thanks very much.

    You are going to have to put the iPad into Recovery Mode and try again: http://support.apple.com/kb/HT4097

  • ) how can we print the bar code in SAP_SCRIPTS?

    ) how can we print the bar code in SAP_SCRIPTS?

    hi Pavan,
    barcodes wil be generated in the printer itself, if you give <BC>&HD_GEN-MATERIAL_NUMBER&<> then you have a value for "Barcode" .
    Adding Your Own Bar Code:-
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94fc51ea11d189570000e829fbbd/content.htm
    barcodes in SAP
    http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
    Print Unique Indicator as a Barcode
    The printing of unique indicators of elements (reference numbers of records, case indicators, or document numbers) as barcodes is controlled by SAPscript forms.
    SAP delivers a common SAPscript form based on the SAP barcode type AUFNR for records, cases, documents and incoming post items.
    To create another SAP barcode type, you can copy the SAPscript form RMPS_BARCODE and then adjust it to your own requirements. Then you have to define the new form using the following attribute names in the table SCMGPARAM:
    From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (‘First page’, ‘Next page’, ‘Last page’) is printed as local variable symbol.
    Definition in the SAPscript form:
    /: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
    /: USING &PAGE&
    /: USING &NEXTPAGE&
    /: CHANGING &BARCODE&
    /: ENDPERFORM
    / &BARCODE&
    Coding of the calling ABAP program:
    REPORT QCJPERFO.
    FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA: PAGNUM LIKE SY-TABIX, "page number
    NEXTPAGE LIKE SY-TABIX. "number of next page
    READ TABLE IN_PAR WITH KEY ‘PAGE’.
    CHECK SY-SUBRC = 0.
    PAGNUM = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY ‘NEXTPAGE’.
    CHECK SY-SUBRC = 0.
    NEXTPAGE = IN_PAR-VALUE.
    READ TABLE OUT_PAR WITH KEY ‘BARCODE’.
    CHECK SY-SUBRC = 0.
    IF PAGNUM = 1.
    OUT_PAR-VALUE = ‘|’. "First page
    ELSE.
    OUT_PAR-VALUE = ‘||’. "Next page
    ENDIF.
    IF NEXTPAGE = 0.
    OUT_PAR-VALUE+2 = ‘L’. "Flag: last page
    ENDIF.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    hope this helps you
    Regards,
    Jayant

Maybe you are looking for