How to avoid the user selecting a different path in my installer
Hello again all you helpful forum-goers!
I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory. My problem is that if the user selects a different path to which to install my primary application, the secondary installer will not put the required support files in the same spot.
Now, I think I've figured out how to get the user-selected path from the "Run executable at the end of installation" option in the Advanced pane of the LabVIEW installer configuration, and I can pass that in to my secondary installer, and that should fix the problem. However, what I'd really like to do is just not give the user the option to install my primary application in a different directory to begin with. I've looked, but cannot find any way to do that.
Does anyone know of any way to not present the option to install an application in a different directory when using the LabVIEW installer?
Thanks in advance for any suggestions,
-Joe
Ben64,
That's great! Thank you so much for your quick reply. The only reason I haven't already accepted that as my solution is that it requires a manual post-compile change to a text file. Ideally I'd prefer not to have to remember to do that every time I rebuild my installer. Is there any way that you know of to automate the process?
If not, I'm happy to have a good solution even if it takes an extra step each time to implement.
-Joe
Similar Messages
-
How to let the user select from more then 1 data templet file to fillin a field
help i have a form the has 5 free form text fields that i need to select from a list of texts to fill it in and then allow the user to add to the data.
thanksthanks here are 2 strings
COPD continue O2 by NC/Albuterol MDI/ Atrovent MDI/ Duonebs/ Albuterol MDI/ Prednisone taper/ IV Solumedrol/ Spiva/ Advair diskus/ oximetry prn/ PT/ OT/ Coreg
CAD/ANGINA cont. O2 by NC?baby ASA/ ASA/ Lopressor/Atenolol/ Lisinopril/ Low fat diet/ PT/OT/ sublingual nitroglycerin prn/ Lasix/ Lipitor/ Zocor/ Mevacor
i would like the user to be able to select from inside of the field when it is blank (fisrt time entering data)
thanks again -
How to avoid the user accounts to appear in the disk boot while installing Yosemite?
Hi, there is an issue when I encrypt the disk in Yosemite, when I make a clean installation, I first format partition with encryption, install system and restart computer, in the first boot the system ask only for disk password then continue creating user account, when I finish the configuration and restart the computer, the first boot screen ask me for disk password or user password, this is wrong, I want that the system ask me first the disk password and then the users accounts passwords to start the session as it was in Mavericks, so I try different ways to do this.
1. In clean Installation is not working, every time that create a user it appears in the first boot screen, in which the system must ask only for disk password.
2. In upgrade Installation with a computer already encrypted, it appears to works properly but if you create a new user it appears in the first boot screen.
3. I test this by doing a clean installation without encryption, create a user and make an image of this partition, then I copy the dwg image to an external disk, then start computer with an USB with Yosemite, using disk utility I erase the partition and format it with encryption, then restore the dwg image in this partition, it looks that works properly, but if I create a New User then the new user appears in the first boot screen when only must ask for disk password.
Can someone help me with this issue please?
If there is someone of Mac can you tell me if this is going to be corrected in this version? or we must wait for the next OS X version.
Thank You.Hi, there is an issue when I encrypt the disk in Yosemite, when I make a clean installation, I first format partition with encryption, install system and restart computer, in the first boot the system ask only for disk password then continue creating user account, when I finish the configuration and restart the computer, the first boot screen ask me for disk password or user password, this is wrong, I want that the system ask me first the disk password and then the users accounts passwords to start the session as it was in Mavericks, so I try different ways to do this.
1. In clean Installation is not working, every time that create a user it appears in the first boot screen, in which the system must ask only for disk password.
2. In upgrade Installation with a computer already encrypted, it appears to works properly but if you create a new user it appears in the first boot screen.
3. I test this by doing a clean installation without encryption, create a user and make an image of this partition, then I copy the dwg image to an external disk, then start computer with an USB with Yosemite, using disk utility I erase the partition and format it with encryption, then restore the dwg image in this partition, it looks that works properly, but if I create a New User then the new user appears in the first boot screen when only must ask for disk password.
Can someone help me with this issue please?
If there is someone of Mac can you tell me if this is going to be corrected in this version? or we must wait for the next OS X version.
Thank You. -
File path control-how to avoid the user to change the path string
Hi all,
I'm using "File path control" to chose file name. I don't want the user to write the path in the control directly (by typing) but only to choose the file via the button on the right.
I can implement this behaviour with path indicator and button of course. But I belieave that it can be done more elegant - only disable the part with the string - not the whole "File path control". But how? I tried to customize the control but not success.
Is it possible?
jochynator
LV 8.0.1, WinXP Pro
Attachments:
Path.vi 44 KBThe way I've done it is to make the path part of the control tiny and hide it behind a string indicator. Then whenever the path control changes value (by pressing the Browse button), I populate the string indicator with the path value. Here's a sample VI demonstrating this method, saved in LabVIEW 8.0.
Hope this helps,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
path_browse.vi 12 KB -
How to avoid the screen of selection output device
Hi all,
Who can tell me how to avoid the screen selection output device when running a smartform.
Best regard.Hi,
data: wa_SSFCTRLOP type SSFCTRLOP.
wa_SSFCTRLOP-DEVICE = 'PRINTER'.
wa_SSFCTRLOP-NO_DIALOG = 'X'.
wa_SSFCTRLOP-PREVIEW = 'X'.
in the function module
call function '....
exporting
CONTROL_PARAMETERS = wa_ssfctrlop
regards,
Santosh Thorat -
How to avoid the below nested select statement
Please any one help me how this select statemet is working and how to avoid the nesetd select statement .
if we avoid below nested , does it improve performace ?
select field1 field2
into table w_feeds
from ZTable as t
where field2 in r_feedf1
and POSITION_POSTDT =
( SELECT MAX( position_postdt ) FROM zTable
where position_postdt le r_pdate-high
and field1 = t~field1 ).
Thanks in Advace.Hi,
Instead of nested query go for two separate queries. I see you are querying on the same table...so better go by this approach
select field1 field2 POSITION_POSTDT
into table w_feeds
from ZTable
where field2 in r_feedf1.
Remove the where condition on POSITION_POSTDT
Sort the table w_feeds by POSITION_POSTDT Descending; So you will get data pertaining to Max Position_Postdt.
Finally delete the other entries which are not Max.
This will enhance the performance over the nested query.
Regards
Shiva
Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM
Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM -
How to bind a user selected value to a view object bind variable?
Hi
I have two pages in ADF BC application. In the first page ,i will give a drop down menu to user which displays all the table names in my databse.
when the user selects a table and goes to the second page..he should be given a menu or a check list of all the columns in the user selected table....
to display the columns i have used the query
Select COLUMN_NAME from user_tab_columns where table_name = : table_name in the view object.
now how to bind the user selected table value in the first page to the table_name bind variable in view object ?
thanks
swathi.Hi,
depends on how the select box is implemented. With ADF and ADF Faces, the default value selection is the list index. In a value change listener you could look up the selected value from the underlying iterator. Store this value e.g. in a session attribute and point the NDValue of the ExecuteWithParams operation to #{sessionScope.your_attribute}
Frank -
How to adjust mouse or trackpad parameters for the user selection screen?
This is not critical, but annoying. I can change the mouse or trackpad parameters by user, so anyone can use their own mouse or trackpad adjustment. However I can not locate how to change this parameters for the welcome or user selection screen. In my case I have two users, both of us use the trackpad with the one touch for click function, so no one press physically the trackpad for a click. However, as the default parameter is the touch function deactivated we have to actually click the trackpad in that exclusive screen.
Another example with mouse, normally we use the mouse with almost double of the default acceleration, but when in the user selection screen the mouse assumes default configuration and feels super SLOWWWWWWW.
Again, this is not critical, but would be very nice to be able to modify this parameters in the welcome screen.
Tyrone CarrionFor the login screen, you are not associated with a normal user, but the system defaults...try logging in to the Admn account and change the behavior there...those settings should then apply to the login screen.
-
How to call an action when the user selects a radiobutton
Hai
PLease help me in providing the information.
In my Project i have two radio buttons as
New
Asssessment
when the user selects new button, i want to automatically call an action in the controller(.jpf file)
Simalarly when he selects the other radio button i need to call a separate action in the controller.
Remember i dont have the submit button.
I want to dynamically call an action when the user selects the radio button.
i dont have any field inthe radio button which actually takes action as an attribute .
please provide me the necessaryHi,
You can use JavaScript to call the action in interest upon the Radio Button Element Being Selected.Should be simple, and if your controller is part of the portlet dont forget to use the jpfScopeId to asscoiate the controller instance with the one in the portlet.
Let me know if you have any further questions. -
How to check the action selected by the user in CRMD_ORDER
Hi all,
I have created actions and these actions will be displayed in the actions tool box in CRMD_ORDER
transaction.
User can select any actions as required.
When the user selects any one of these action, i want to get the action selected by the user and i want to validate aganist a field in the same transaction.
This validation should happen only for certain actions, so i want to find out the action selected by the user .
I didnt find any threads related to this. Pls provide inputs.
Thnks,
Jean.Hi PePe,
Thnks for ur rply. But both the BADI's didnt helped me, I didnt find any information related to action in these BADI's.
Any other suggestion pls.
Regard's
Jean.
Didnt find exact solution, i got alternative solution to my requirement. closing the thread. -
i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
substr(rcstcnatcnatcnatcnawther,3,2) c,
substr(rcstcnatcnatcnatcnawther,5,1) s,
substr(rcstcnatcnatcnatcnawther,6,3) tc,
substr(rcstcnatcnatcnatcnawther,9,3) na,
substr(rcstcnatcnatcnatcnawther,12,3) tc2,
substr(rcstcnatcnatcnatcnawther,15,3) na2,
substr(rcstcnatcnatcnatcnawther,18,3) tc3,
substr(rcstcnatcnatcnatcnawther,21,3) na3,
substr(rcstcnatcnatcnatcnawther,24,3) tc4,
substr(rcstcnatcnatcnatcnawther,27,3) na4,
substr(rcstcnatcnatcnatcnawther,30,10) wther,
sno
from scott.sms1 a
where sno = (select max(sno)
from sms1
where sno != a.sno
); ---------------> added where clause with table alias.
end;Regards
Etbin -
"File Dialog" Express VI returns the wrong path when the user selects the desktop
In labview 8.0.1 with Windows
XP, the File Dialog Express VI seems to return something other than the path
selected by the user when configured to browse for folders (or files and
folders) and the user selects the desktop.
I can't determine exactly when it works and when it fails, but it always seems
to fail if the user selects the desktop from the places bar (the shortcuts on
the left side of the dialog) or from the drop-down menu at the top of the
dialog and then clicks the "Current Folder" button to dismiss the
dialog. In this case it always returns whatever path is wired to the
"Start Path" terminal.
If the user navigates to the desktop with the "Up One Level" button
or by selecting the actual desktop directory under Documents and Settings, the
correct path is returned.
If the user selects a file before clicking the desktop icon, then clicks
"Current Folder" the correct path is returned.
If the user clicks the desktop icon, clicks open, then clicks "Current
Folder" the correct path is returned.
It's possible to work around this bug in most cases by setting the start path
to the desktop.
Has anyone seen this behavior before?
Can anybody verify this behavior by running the attached VI?
In the past, when I've reported issues like this I've received responses from
NI engineers that basically said "Thanks, but we already knew
that". Is there anywhere that users can search the list of known
bugs and avoid wasting time tracking down issues that are already understood by
NI?
Thanks,
Adam Brewster
Attachments:
File Dialog Test.vi 39 KBI'm on 8.2 and I can't get it to fail no matter how I select the desktop. I haven't tried it in 8.0, but I imagine that if this really is a bug, they did know about it and fixed it with 8.2. If this causes a real problem for you, I would suggest upgrading if you can.
-
How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?
How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi 38 KB -
Is that possible to display the user selection data in the printable page?
Hi All,
I'm going to add a printablepage button on my page.
Here comes a questions.
Is that possible to display the user selection data in the printable page?
For example,
I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
Please help.Hi Yannick,
Thanks a lot for the information. It worked.
The portlet data can be accessible using bindings, but parameter name can be different.
Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
Is this possible? If yes can you please let me know the steps?
Thanks in advance!
Somnath
Edited by: Somnath Basak on Dec 20, 2011 9:41 AM -
How can avoid the problem of Parameter Prompting when I submitting ?
I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
1. using System;
2. using System.Collections;
3. using System.Configuration;
4. using System.Data;
5. using System.Linq;
6. using System.Web;
7. using System.Web.Security;
8. using System.Web.UI;
9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22. CrystalReportViewer crViewer = new CrystalReportViewer();
23. //CrystalReportSource crsource = new CrystalReportSource();
24. int nItemId;
25.
26. protected void Page_Load(object sender, EventArgs e)
27. {
28. //Database Connection
29. ConnectionInfo ConnInfo = new ConnectionInfo();
30. {
31. ConnInfo.ServerName = "127.0.0.1";
32. ConnInfo.DatabaseName = "Xcodf";
33. ConnInfo.UserID = "HR777";
34. ConnInfo.Password = "zghshshs";
35. }
36. // For Each Logon parameters
37. foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38. {
39. cnInfo.ConnectionInfo = ConnInfo;
40.
41. }
42.
43.
44.
45.
46.
47.
48. //Declaring varibles
49. nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50. //string strStartDate = Request.QueryString.Get("StartDate");
51. //int nItemId = 20;
52. string strStartDate = "23-JUL-2010";
53.
54. // object declration
55. CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56. CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59. TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61. // new report document object
62. ReportDocument oRpt = new ReportDocument();
63.
64. // loading the ItemReport in report document
65. oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67. // getting the database, the table and the LogOnInfo object which holds login onformation
68. crDatabase = oRpt.Database;
69.
70. // getting the table in an object array of one item
71. object[] arrTables = new object[1];
72. crDatabase.Tables.CopyTo(arrTables, 0);
73.
74. // assigning the first item of array to crTable by downcasting the object to Table
75. crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77. dbConn = crTable.LogOnInfo;
78.
79. // setting values
80. dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81. dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82. dbConn.ConnectionInfo.UserID = "HR777";
83. dbConn.ConnectionInfo.Password = "zghshshs";
84.
85. // applying login info to the table object
86. crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93. crViewer.RefreshReport();
94.
95. // defining report source
96. crViewer.ReportSource = oRpt;
97. //CrystalReportSource1.Report = oRpt;
98.
99. // so uptill now we have created everything
100. // what remains is to pass parameters to our report, so it
101. // shows only selected records. so calling a method to set
102. // those parameters.
103. setReportParameters();
104. }
105.
106. private void setReportParameters()
107. {
108.
109. // all the parameter fields will be added to this collection
110. ParameterFields paramFields = new ParameterFields();
111. //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112. //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114. // the parameter fields to be sent to the report
115. ParameterField pfItemId = new ParameterField();
116. //ParameterField pfStartDate = new ParameterField();
117. //ParameterField pfEndDate = new ParameterField();
118.
119. // setting the name of parameter fields with wich they will be recieved in report
120.
121. pfItemId.ParameterFieldName = "RegionID";
122.
123. //pfStartDate.ParameterFieldName = "StartDate";
124. //pfEndDate.ParameterFieldName = "EndDate";
125.
126. // the above declared parameter fields accept values as discrete objects
127. // so declaring discrete objects
128. ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129. //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130. //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132. // setting the values of discrete objects
133.
134.
135. dcItemId.Value = nItemId;
136.
137. //dcStartDate.Value = DateTime.Parse(strStartDate);
138. //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140. // now adding these discrete values to parameters
141. //paramField.HasCurrentValue = true;
142.
143.
144.
145. //pfItemId.CurrentValues.Clear();
146. int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147. pfItemId.Name = valueIDD.ToString();
148.
149. pfItemId.CurrentValues.Add(dcItemId);
150. //ParaLocation.ApplyCurrentValues;
151. pfItemId.HasCurrentValue = true;
152.
153. //pfStartDate.CurrentValues.Add(dcStartDate);
154. //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156. // now adding all these parameter fields to the parameter collection
157. paramFields.Add(pfItemId);
158.
159. //paramFields.Add(pfStartDate);
160. //paramFields.Add(pfEndDate);
161. /////////////////////
162. //Formula from Crystal
163. //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164. crViewer.RefreshReport();
165. // finally add the parameter collection to the crystal report viewer
166. crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170. }
171. }Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Maybe you are looking for
-
How to revert to Classic view in Address Book?
I tried to use it, but this NEW look of Address Book in LION is just a worthless pile of junk! Not only is fake book look out of place and a ridiculous addition to a MODERN OS, but I'm also getting sick of the new trend to hide info that was once eas
-
Imported Invoices to a Consolidated BP does not reflect Aging correctly
I imported some service documents and the file had all the correct BP codes but they were set up in SAP with a payment consolidating BP...now when I look at the account balance for these, they are all blank and all documents reside under the Consolid
-
Hey all. I have a datagrid that has it's columns generated dynamically based on whatever columns are in the database. I have no problems retrieving the columns and dynamically creating my datagrid with those columns. My problem arises not with genera
-
Multiple Reporting Currency Setup in Release 11.5.9
Hi, I need a clarification: Can one any tell me about the feature of Multiple Reporting Currency (MRC)implementation in Oracle Apps 11.5.9?? Whether it is a newly introduced feature in apps or will it come as existing feature in 11.5.9 instance. If t
-
How to add more PDF pages to a document, there is no tab for this on new vesion