How to bring the non-mandatory selection field in Portal

Hi Expert,
I have created an query in Bex. when i run it one selection field is coming like Material,
vendor etc, but in this selection field all are option, non of them is mandatory.
My problem is that when i am creating iview on that query in 7.0 flow and executing/preview
that iview it directly bring the output. it is not bring the selection paremeter like material, vendor,
etc. But same case is not happened with ivew for which query has mandatory field
I want that en spite of running directly it ask the optional selection parameter.
Thanks and Regards
Lalit Kumar

Hi
Check it in SPRO- sap img- material management- logistics invoice verification- incoming invoice- activate direct posting to g/l accounts.then save. It will work.
Regards,
Raman

Similar Messages

When we change the non-mandatory field in the form, it doesn't get updated

Hi... I have one question here..
If I have non-mandatory fields in a custom form, and when I query the form and change the value in the non-mandatory field and click on save, then it doesn't save. It says 'No Changes to Save'. But, it's not the same for non-mandatory fields.
Can you please suggest me?
-vrdida

VRdida,
If I understand correctly, you have a non-Required item in your form that has an LOV assigned. While this item is Required=No, it works correctly. When you change the Required property of the item to 'Yes' then it fails. When this occurs, do you get an error message? Are you able to select a value from the LOV?
It sounds like the Required=Yes property might be preventing you f rom opening the LOV. Try setting the Module property: Defer Required Enforcement = Yes. This is the typical setting in an EBS form. This is what allows you to navigate out of a Required field if the value is NULL, but will give you a Required message when you attempt to save the record if the value is still NULL.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Apr 6, 2011 11:43 AM

How to adjust the text in input field

Hi Expert,
New in VC development. Can someone guide how to adjust the text in input field? Because of long text length it is not displaying fully in visual composer iView so user are not able to see the entire text in input fields

HI Kundan,
I assume that you have already tried different options perent in Label Postion for the field.
If none of these options meet your requirement then you can try the following workaround:
In the display properties, select label position as no label.
In the form view add a new UI Control for Plain Text or HTML text and change its Label to "Material Number".
Now place this new UI Control in before your actual Input field such that it appears as the field label.
Hope this helps.
Regards,
Rk

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
      MFL1(9) TYPE C,
      MFL2(5) TYPE C,
      MFL3(9) TYPE C,
      MFL4(2) TYPE C,
      MFL5(8) TYPE C ,
     end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
      setid(8) type c,
      end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
   mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
   mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
   mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
   mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
   mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
   mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
     FILENAME         = MFILENAME
     FILETYPE         = 'ASC'
   TABLES
     data_tab         = matab1
   EXCEPTIONS
     file_write_error = 1
     invalid_type     = 2
     no_authority     = 3
     unknown_error    = 4
     OTHERS           = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
     MFL5 = '0'.
   CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
    MFL5 = ''.
ENDIF.
concatenate MFL1 ','   into MFL1.
concatenate MFL1 ','   into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
                 "evaluate
*&      Form GET_SOURCE
      text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM.                    "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

How To Increase the Size of Memo Fields 4000 Char in WebCenter 11g?

How To Increase the Size of Memo Fields greater than 4000 Char in WebCenter Content (UCM) 11g?
I was able to increase the size of Memo field from 2000 Char to 4000 by setting parameter value MEMOFIELDSIZE=4000 . But the requirement is to increase the size more than 4000 around 7000 char but Database(Oracle 11G) is not supporting more than 4000 char.
Is there any other way to increase the size of Memo field?
Thanks in Advance!!
Regards
Ram

Hello All,
Thanks for your responses.
Let me explain the scenario again in detail:
1. we have three meta-data fileds xProductCategory,xProductFamily and xProducts
2. These fields are related with DCL feature and corresponding values are being stored in corresponding custom Views
3. xProducFamily is dependent of xProductCategory and xProduct is dependent on xProductFamily
4. currently, there are around 250 Product values and average name of Product can be of 25 Char, so if we are selecting all product values for some Contents then Product Values are being stored in DocMeta table as comma separated values with one space, so total characters are being very high than 4K Char.
5. Currently view that is storing the Product values, stores "Name" column instead of ID(like 1,2,3....)
6. And our Content Server is integrated with Oracle WebSenter Portal, where logic has written to retrieve the contents based on "Product Name" instead of "Product ID" and already we are in UAT phase.Currently we are not in situation to revert the changes from Product Name to Product ID.
7. Also if we are storing the values on the basis of Product ID, then again the issue may arise in Future, if the number of Products increased.
Hoping the issue explanation is clear now and waiting for some possible solution for increasing the length of memo field.
Thanks in Advance !!
Regards
Ram

How to print the value of a field of type FLTP

hi experts,
pls tell me how to print the value of a field of type FLTP. i.e in decimal format not in exponential format.
thankyou.
krishna

Hi ,
I dont think in Floating point u can able to go for the decimal point display as it is for the minimum precission display..
Define the variable as the 'packed' type and then u can able to define the decimal point...
Cheers,
SImha.

How to encrypt the text in password field in Oracle Forms version 6i

Need help!
How to encrypt the text in password field in Oracle Forms version 6i?
one way is to change the settings in the property palette. Can somebody provide me some script to be run while the form is running which will enable the password to be encrypted?
Thanks!

Hello,
Do you mean "hidden" (replaced with stars) or encrypted (that needs to be decrypted ?
Francois

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

How to change the lenth of existing field in sap standard table

Hi all,
can anybody help,my requirement is, how to change the length of existing field in sap standard table....
thanks in advance..

Which field are you thinking of in particular? Are you wanting to increase or decrease the length?
Some fields are used so extensively that a change to their length will mean adjusting many tables, some of them potentially very large, and hence taking a long time to adjust.
Some standard SAP programs expect certain fields to be of specific lengths and won't work if the length is changed.
Some screens could cease to work.
If you decrease length, then you could lose data.
matt

How to get the index of selected values in SelectManyChoice...

How to get the index of selected values in SelectManyChoice... the value which i get is coming when i submit the value second time

By using the given code i get the value of the selected indices, but problem here is i get the value when it get submits at the second time... First time the length of that int array is 0.
Second time it shows the value two times (i.e) First time submitted value and the second time submitted value. After that it works fine.. I have problem while clicking first time only..
The Following error also raises.. One multiselect is dependent on other multiselect.
DF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase PROCESS_VALIDATIONS 3
java.lang.ArrayIndexOutOfBoundsException: 6
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.findObjectFromIndex(FacesCtrlListBinding.java:334)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.getInputValue(FacesCtrlListBinding.java:199)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGet(JUCtrlValueBinding.java:2416)
     at oracle.jbo.uicli.binding.JUCtrlListBinding.internalGet(JUCtrlListBinding.java:3717)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.internalGet(FacesCtrlListBinding.java:500)
     at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:749)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)

How to get the dialog of select ODBC source

how to get the dialog of select ODBC source which system provide.

JNI.
Or buy/find a library that does it for you (using JNI.)

How to bring the hyperlink in a JLabel object ?

How to bring the hyperlink in a JLabel object ?
I tried the following--> [ this is a sample ]
JLabel label;
label=new JLabel("<HTML><A HREF='file://D:/Examination/calc.exe'>Calculator</A></HTML>");Using this JLabel object in an JDialog the label comes perfectly with such a look of the hyperlink
[ Blue coloured and underlined ] that's all !!
It doesn't work anything that it should do.
While all the html tags work perfectly in java then why the hyperlink in label doesn't ?
If you have an idea then please send me the code.
Thanks!

see JXHyperLink at https://swingx.dev.java.net/
Yeah, I looked at this. I agree with the other guy who said that all this does, presumably, is change the color of the text when the button is getting mousedover. That doesn't solve anything.
As far as JEditorPane, it has its bad points and ... well, mostly bad points. However that's not really fair. JEditorPane was not designed to be on the level of an IE or FireFox.
The BEST thing to use JEditor's web browsing facilities on is for creating your own documentation and help pages for software you are developing. Here is a list of some of the things JEditorPane does not come equiped with (as of 1.4 I haven't tried playing with it in 1.5):
1. Form submission, PUT, and GET
2. Download status
3. Caching
4. Cookies
5. Plugins (ie Java, Flash, Quicktime)
6. No javascript.
Beyond that it is extremely brittle in parsing the HTML, and if the HTML is not totally well formed (and many pages are not) you won't get anything

How to bring the Cost of Depreciation to Costing

Hi,
How to bring the Depreciation Cost, Interest on Working capital to Costing.
We have created the Cost components for those mentioned items and what criteria we can bring the values to Costing.
Thanks
Prasad

It's a big topic, ahah.
Depreciation, Interest and Capitals must be different primary cost element, right?
Maintain cost component structure TC:OKKN to make sure your cost component split is by primary cost element splitting. Assign the cost elements of depreciation, interest or capitals to relevant cost component.
Two way to define the cost bring to cost components,
1. Define splitting structure TC: OKES and assign to manufacturing cost centers TC:OKEW
2. Conduct activity type dependent planning through TC:KP06.

How to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL)

Hi Experts,
Can you please tell me to how to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL) when saving of the shipment document.

shipment cost calculation only on the Leg level and not on header level. Currently a lot of confusion happened after creating the shipment cost document and found that the status is u201CBu201D.
now we intend to define detailed specifications to how to create this new user exit to update the shipment cost relevancy at shipment header.
The main functionality of the user exit to be created is to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL).can u pls tell how to do this.

How to bring the non-mandatory selection field in Portal

Similar Messages

Maybe you are looking for