How to broadcast call on all phones in intercom

Dears,
Hope you doing well
Please guide me how I can make a call from one intercom extension on to all intercom extension present within the network.
Ex: An Alert on all extension through intercom service.

Hi Mohammed,
agree with Chris - you need a paging system.
I recommend to follow this link http://www.2ring.com/NewJuice to get more information about 2Ring solution.
It can deliver much more than just paging.
HTH,
Martin

Similar Messages

  • Broadcast Message to All Phones

    Hi
    I am wanting to develop a solution to send a message to all IP phones or a selection of IP Phones.
    I do not want to use a 3rd party product - I want to write the code myself in c#
    I have downloaded the SDK and have the Push2Phone ASP scripts working.
    I can send text from a C# web application to a particular IP Address by using the Execute Method.
    Is using the Push2Phone example the only method to send to multiple phones?
    Create a queue and send to each IP address one after the other an execute command?
    Is there a broadcast method to send to all phones? How do you configure this?
    The PushToPhone uses the execute method. Is this the correct method one would use to send to 200 phones?
    Where is the best documentation for doing what I want. I have done a lot of searching but since I am new to this technology I keep finding information that is not quite relevant to my task. ( a url please ).
    I hope someone can answer one or more of my questions.
    Cheers
    Chris

    >Create a queue and send to each IP address one after >the other an execute command?
    Yes, that's the way to go. Well, I'd use either a threadpool and send a bunch of requests simultaneously (with authentication, it can take a while before you get a response).
    Also keep in mind to use your own authentication page to reduce the load on your CCM and speed up the process.
    There is no broadcast message so you have to get all devices via DeviceListX.asp (CCM 3/4.x) or AXL Serviceability (CCM 5.x)

  • How to video call with other phone using Iphone 4??

    Hii
    Anant Patel here.
    How to use iphone 4 for video call to other phone like nokia or others.??

    Skype, if the other phones support skype.

  • How to decline call when the phone is not in lock screen

    Why is there no option to decline a call when it rings like for the old iOS? I need an option to decline a call, not remind me later or send a message

    It does not solve the problem for me. I liked to decline people and instantly call them back (cause I have bonus calls) by simply sliding their name in the missed call that appeared right affter I declined.
    Now if I decline by double tapping the power button the missed call does now show up on the notification screen, so I have to unlock, go to my contacts and call back... Do I need to say this is terribly worst???

  • Nokia 1520 - how to forward calls?

    Hi. In setting>phone.......there is no option for call forward on Lumia 1520
    Moderator's note: We amended the subject as the post was moved to the appropriate board.
    Solved!
    Go to Solution.

    Hi,
    Welcome to the forum.
    Here's how to activate call forwarding:
    Tap Phone >  > settings, or tap Settings > network+‎, depending on your software version.
    Switch Call forwarding to On.
    Type in the phone number in the Forward calls to box, and tap save.
    To check if call forwarding is being used, tap the top of the screen. This icon should show up. 
    Note: You may need to contact your network service provider to get this service.
    Besides forwarding calls to another phone number, you can also forward these calls to your voice mail and listen to them later.
    Tap Phone >  > settings, or tap Settings > network+‎, depending on your software version.
    On first use, type in your default voice mail number in the Voicemail number box.
    If necessary, switch Use default voicemail number to On.
    Switch Call forwarding to On, and type in your voice mail number in the Forward calls to box.
    Note: You may need to contact your service provider to get this service & to get the default voice mail number.
    Hope this helps.

  • JAVA: calling a cell phone

    How can I call a cell phone using java?
    I need it to make a call to a certain number and play a certain voice message, (and also send a text message).
    LP

    It depends which hardware you want to use, you can send sms messages via a cellphone which you have connected to your pc. Then you can use AT-commands which you have to send to the port where you have connected your phone (or gsm modul). To do this from within an application you can use javax.comm to communicate with your serial port!
    Hope it helps a little bit.

  • Broadcast message to all contacts

    How to broadcast message to all the contacts via sms?

    Hi
    The link below was the only information I could find that made sense.
    http://supportforums.blackberry.com/t5/BlackBerry-Enterprise-Server/Error-1330/td-p/634913
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • Support Line - Call Forward All through Hunt Pilot to cell phone

    I know I may be beating a dead horse, but I've found so much help in these forums that I figured I'd give it a shot.
    We have a Cisco Unified Communications Manager Business Edition and we are running into a configuration issue. What we would like to do is to create an emergency support line for our IT staff. The way we would like this to function is that a caller dials a number, CM accepts the call and dials out to our IT staff's cell phone numbers in a round-robin fashion. To avoid the caller getting dumped into the IT staff's voice mail on their cells, we would like the staff member to have to dial a number to accept the call. If there is no answer, the call rolls to the next cell number. If no one is available, the caller should be directed to Unity Connection to leave a message. Unity then will send out text and email messages to the support staff.
    I know that we can use Unity to perform an assisted transfer, which will require the user to press "1" to accept the call, and we are able to get Unity to send out the notifications (text and email) when a voice message is left. The issue is with Call Manager making the outbound calls to the cell phones.
    What we have attempted is to setup DNs that call forward all to the users cell numbers. These DNs have been added to a Line Group, which has a Hunt Pilot attached to it. Any time this pilot is called, we get a reorder. Using the DNA, we see that "no device is associated with the DN", which is under the DN for the first users cell forward. If we add that DN as a second line to that users IP Phone (7940), then the call into the Hunt Pilot rings that line on the IP phone, not the CFA to the cell phone.
    After weeks of digging around, it seems as though CFA in a Hunt is just not possible. My boss wants official word from Cisco about this, but TAC doesn't seem to want to help due to service contract issues (which blows my mind, as we have opened several cases in the past two months for configuration related issues). Our Business Edition came with Contact Center Xpress, although we do not have the resources available to install it. If CCX will carry out this task, that might be enough to push management into getting another server to support this, but without being able to play around with it, I don't know.
    If anyone has any suggestions on how to make this work, I would GREATLY appreciate the help!
    Thanks in advance,
    -Geoff

    Hi Geoff,
    Always interesting isn't it :)
    Call Forward settings on individual Hunt member phones are ignored when presented a call via the Hunt feature. Here is a clip;
    The concept of hunting differs from that of call forwarding. Hunting allows Cisco CallManager to extend a call to one or more lists of numbers, where each such list can specify a hunting order that is chosen from a fixed set of algorithms. When a call extends to a hunt party from these lists and the party fails to answer or is busy, hunting resumes with the next hunt party. (The next hunt party varies depending on the current hunt algorithm.) Hunting thus ignores the Call Forward No Answer (CFNA) or Call Forward Busy (CFB) settings for the attempted party. This also applies to CFWD ALL settings.
    From this doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edabe.html#wp107892
    So, any Forwarding settings have to be done on the Hunt Pilot itself. These Destination settings (on the Hunt Pilot) need to be configured to go to the Unity Voicemail Pilot # or perhaps this is where you Forward out to the Cell #;
    Hunt Forward Settings
    Forward Hunt No Answer - When the call that is distributed through the hunt list is not answered in a specific time, this field specifies how to forward the call.
    Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)
    Forward Hunt Busy - When the call that is distributed through the hunt list is busy in a specific time, this field specifies how to forward the call.
    Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)
    Maximum Hunt Timer - Enter a value (in seconds) that specifies the maximum time for hunting.(Used in conjunction with Forward Hunt Busy)
    Maybe you could leverage these Unity Connection configs to achieve your desired results. These will ensure that the Message is not left unattended;
    Cascading Message Notification
    Cascading message notification allows you to send notifications to a widening circle of recipients. Cisco Unity Connection continues to send notifications according to the devices you selected until the message has been saved or deleted by a recipient.
    For example, to create a cascade of message notifications for your Technical Support department,
    Chaining Message Notification
    Message notification can be set to "chain" to a series of notification devices if an attempt to send notification to the first selected device fails. The definition of failure to a notification device is based on the options you select for retrying a device that is not answered or is busy.
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/user_mac/guide/2xcucmac040.html#wp1132107
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/user_mac_cmbe/guide/6xcucmbemac040.html#wp1132107
    Hope this helps!
    Rob

  • I just upgraded my iPhone4 iOs and lost ALL Phone Contacts! How can I get them back?

    HELP! I've been using my iPhone consistently for ALL phone numbers, since I have serious memory problems due to fibromyalgia. I upgraded my phone last night finally, having moved my photos out of it I had the space to download and install the upgrade.
    I got a nasty shock this morning when I tried to make a routine call and found ALL of my phone contacts missing. They don't seem to be either in the cloud or in the phone. What happened? It said it was storing them in the cloud but they're all gone! How can I get them back?
    IF this normally happens, why should I ever upgrade? Seriously! I didn't think to copy all of it out manually before upgrading, I'd upgraded once before without any problems. Addresses and other details gone too. I've got four numbers in "Favorites" but no context for them beyond location by state. I don't even know who they are - can't recognize just the numbers.

    Thanks, but I checked iCloud and it has none of them.
    If it backed up to my laptop, that died and I just got the new computer. The one that's crashed won't even boot, so there's no way to even tell if it was syncing the contacts along with all the phone photos. Literally happened at the same time - it was because I had the new computer that I was finally able to pull the photos off the phone and make room for the upgrade. It had refused to upgrade for lack of space for some time.
    I had thought it was set to sync to iCloud but it vanished from BOTH my phone and the cloud. That's why I'm so angry about it.

  • I just installed ios 8 update and now my email won't open and I can't receive calls.  All of my apps have been updated.  How can I fix this?

    I have an iphone 5 and I just installed the latest ios update and now I can't open my email app and I can't receive calls.  All of my apps have been updated.  How can I fix this?

    Try a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. If it still isn't working, then restore the phone.

  • I have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

    i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

    You can turn iMessage off on your iPhone.  That's relatively easy.  Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one.  For that answer you should probably contact Samsung support.

  • I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    Are the contact details in your contacts app, the phone app uses the contact app to put names against telephone numbers.

  • I have an I pad2, an iMac desktop and an I phone 5, how do I get them all to be bale to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Ay help gratefully received !!

    I have an I pad2, an iMac desktop(2012) and an I phone 5, how do I get them all to be able to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Any help gratefully received !!

    Graham,
    For the iPad, iMac you need to create verifyible e-mail addresses created with one of the providers such as Yahoo, Gmail,etc.  For the iphone you should use it's phone number, but an e-mail could be used for it too.  If you want to associate these e-mail addresses with a single ID, I'm including a link to give you info about how you can do that. Read it carefully, as it can be a bit confusing.
    http://support.apple.com/kb/HE68

  • How do i sync my i phone to a new computer without losing all of my pictures, set up, apps, etc...?

    How do i sync my i phone to a new computer without losing my set up, apps, pictures etc...?

    One of the reasons to include your iTunes library with your computer's backup along with all other important data that is kept separate from your laptop - not carried in the same case, etc.
    iTunes includes an option to transfer iTunes content that was purchased/downloaded from the iTunes store from an iDevice, but this is for iTunes content that was purchased/downloaded from the iTunes store only.
    First you need to authorize your new computer with your iTunes account with iTunes. With your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.
    If you are in the US, you can do this now as well.
    http://support.apple.com/kb/ht2519

  • Hi! At connection to iTunes the section "other" constantly increases. What's the matter? How to avoid it? On phone music isn't necessary, video too isn't present. But another grows. How to correct it? I know only one method, it to dump all settings and a

    Hi! At connection to iTunes the section "other" constantly increases. What's the matter? How to avoid it? On phone music isn't necessary, video too isn't present. But another grows. How to correct it? I know only one method, it to dump all settings and a content.

    http://discussions.apple.com/docs/DOC-5142

Maybe you are looking for