How to build formula?

Hi,
Maybe someone of you can help me in such issue.
I have data in that form:
City, salesman, revenue.
In Webi I want to create report wich shows revenue per number of salesmen in city.
F.e.
In City_1 there are 4 salesmen and sum of their revenue is 10000,
in City_2 there are 4 salesmen and sum of their revenue is 30000,
In City_3 there are 6 salesmen and sum of their revenue is 60000.
The report should shows:
Number of salesmen,     Revenue
     4 salesmen ,                   40000
     6 salesmen ,                   60000
There is no City and no salesmen dimensions in the report.
The question is how to build formula for Number of salesmen.
Thanks for replying.
Regards.
MG

hiding report body is an issue, but it can be done some how.
Tell me something
do you want the report like below
city       no of salesman      revenue
city_1   4 salesman            10000
city_2   5 salesman            30000
then try this
variable 1 : no of salesman = count(salesman) In city      (note:make sure you use IN keyword)
variable 2 revenue by city = sum(revenue) in City
in your report pull
city variable1 variable2
let me know if this works.
Thanks,
Karthik

Similar Messages

Error building formula

I am trying to build formulas involving cells in another table on the same sheet. I click on the cell I want to reference, and sometimes it works, sometimes it doesn't.
When it works, the cell I click becomes coloured, and the formula includes a reference in the form "Table Name :: cell column&row". However, other times, it doesn't work, and I get a reference to some random cell in the table where the formula is, and that cell changes colour. It seems to depend on the cell being referenced. I even tried referencing a cell that worked, and then editing the reference itself to point to the cell I really wanted - it reverted to a reference to the wrong cell.
It seems that the cells that I am having trouble referencing are ones I recently added to the table, by inserting rows, since it was last saved (when everything worked).
Any ideas?
Message was edited by: Brian Gibb
Message was edited by: Brian Gibb
Message was edited by: Brian Gibb

I have figured out what caused this problem, and how to work around it. Based on what I found, I would say that this is a bug in Numbers - the program doesn't work the way it should.
It turns out that the cells I was referring to (in a table of input value) had as their rightmost header column a small integer (they were box numbers on tax information slips). The formulas that referred to them set up references to, for example, "2007 22" meaning the value in box 22 in year 2007 in the input values table. When later I edited the formula, rather than interpreting it as a reference to the row identified as 22 in the other table, it changed the reference to row 22 in the current table.
I got around it by changing the layout of my input values table so the box number was no longer the rightmost header column (rather the description text is). Now the references read, for example, "2007 Income tax deducted", and the confusion goes away.

How to build a Oracle style Web site

Dear All,
(Not sure whether this question should be this sub-site or not.)
My question is how to build a Oracle style Web site, what technology should be use.
Example Site: [http://www.orapub.net/ebs/index.htm|http://www.orapub.net/ebs/index.htm]
This web site style is like Oracle Enterprise Manager.
Thanks a lot
Pan

You can use Oracle Webcenter or just Oracle ADF to build a Oracle Enterprise Manager kind of Website.
See details here -
http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
http://www.youtube.com/watch?v=iE2zTNhlvy8

How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000

Post Author: ltkin
CA Forum: WebIntelligence Reporting
Hi,
How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000 ?
Regards,

Hi ltkin,
Unfortunately, it is not possible in Xir2 to create Webi reports from stored procedures.
Webi reports can only be created from Universe. So in Business Objects XIR3 we can create a special universe that enables Web Intelligence user's to access stored procedures residing in the database. This is the only way that Web Intelligence user's can access stored procedures.
Please let me know if the above information helps.
Regards,
Pavan

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David

How to build the FM data I_header and I_orgdata

hi all,
Im working on the conversion program for AVL using the following function modules
BBP_PD_AVL_GETLIST
BBP_PD_AVL_CREATE
BBP_PD_AVL_UPDATE
BBP_PD_AVL_SAVE
In the function module BBP_PD_AVL_CREATE , how to build the FM data I_HEADER and I_ORGDATA.
I'm giving 3 input in Export parameter in BBP_PD_AVL_GETLIST and E_pdlist should contain data .
but e_pdlist is not getting data...any suggestion..
after execution it was showing "Buffer table is not up to date"
with regards,
P.lokesh

Hi Lokesh,
We are also encountering same problem.
How did you solve your problem?
Would really appreciate your help.
Thanks,
Kezia

How to apply formula field for a chart object in crystal report XI

Hi
how to add formula field for a chartobject, i tried the following code but returns invalid condition field.
i want to show different chart in same crystal report viewer with different coursestatus values.
please suggest where ia m wrong.
               FormulaField oFormulaField;
               oFormulaField = new FormulaField();
               oFormulaField.Name = "Status1";
               oFormulaField.Text = "{CSP_PROCESS_REPORT.Coursestatus} = 'Mastered'";
               oFormulaField.Syntax = CrFormulaSyntaxEnum.crFormulaSyntaxCrystal;
               oFormulaField.Type = CrFieldValueTypeEnum.crFieldValueTypeStringField;
                boChartObject.ChartDefinition.ConditionFields.Add(oFormulaField);
regards,
Padmanaban V

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

How to build a search engine in the database?

Hi there,
say I have 3 tables:
1. Table_empl: idEmpl, fname, lname, dob...
2. table_department: idDpartment, idEmpl, departmentName, section...
3. table_fligths: idFlight, idEmapl, departure date, destination, carrier...I would like to provide the end-user a text box (in my GUI) where he can write whatever he would like to get info about. If, for example, he'll write: british-airways, I expect the system to search everything in the db that matches this input.
Question: How can I design such a search engine that retrieve information from every possible table in the db with reference to every column.
thanks for any pointers

thanks darted for your reply. so what do you recommend? should i give the end user all names of tables and columns and ask him to choose from the list and than build a query based on that?
this is optional but i'd rather have one exec button and to return all possible results from the db. if (in the example i provided) it found 'british airways' in the carrier - than that a result. if it founds 'british' in the lname of table_emple - that's another result. so the output should be something like:
found 2 matches:
1. british airways, 10/10/2006, LHR
2. British, John, 12/01/63,
any idea how to build that?

How to build a query based on(UNION) 3 vendor InfoObject

Dear Experts:
I have a requirement to build one query based on 3 vendor InfoObjct: 0VENDOR + 0VEN_COMPC + 0VEN_PURORG.
I tried to build a multiprovider upon these 3 infoobjects, but when I Identify(Assign) the key for each InfoObject, supposely there should be 3 InfoObject for me to check (0VENDOR, 0VEN_COMPC and 0VEN_PURORG) so that I can UNION these 3 infoobjects together on vendor number. But since the reference infoobject of these 3 vendor master data is different, I can not check the 3 together.
Can anybody let me know how to build that query? I only need vendor number show once, and the attributes of 0VEN_COMPC and 0VEN_PURORG can be union to 0vENDOR.
Any post would be appreciated and thank you all in advance!
Best Regards!
Tim

Hi,
you can create a link between the vendor objects itself, means link 0vendor with 0ven_compc and 0ven_purorg. This should give you a list of all vendors multiplied with the comp codes multiplied with the purch. org. May be here it is possible to create another link between a attribute (eg. comp_code of 0ven_purorg with comp_code of 0ven_compc). In case it is not possible you need to add this link information somehow. Another option might be to create 2 queries. One on a infoset of 0vendor and 0ven_purorg and another one on 0vendor and 0ven_compc.
regards
Siggi

How to build a server?

Hey,
Can anybody tell where I can find online tutorials on how to build a server using java?
Thanks

@bender02
Thx very much for your link. This ready-made solutions can help me to save a lot of otherwise wasted time. QNAP's NAS solution looks good and this Bubba|Two (though it doesn't have mirroring via raid1) is also very attractive.
I am very interested in what server solution you use.
My planned server is really for local network uses only. It should serve for file related purposes like file sharing over the network, backup (maybe with raid1) and a centralized data storage.
I think I will settle with one of this commercial and ready-for-use systems. The thought to tinker around and to make everything by yourself is very temptating but I am getting weary of it. And I dont have the time to tinker around as I have to study enormous amounts
If I did everything by myself I would have to learn how to handle ssh and rsync, which software is suited for what purpose, how I can configure each software to fit my needs and at last I would have to work on some scripts or search for them to achieve a workaround. And this takes for weeks and months, time that I can't afford -.- sometimes a desktop alone can be enough work to do, when I want everything to be "perfect" and "secure". In the past the guys worked on their motorcycles and now they work on their computers, hehe
So if nobody has a very good reason why I should tinker around, then I'll buy some ready-for-use stuff.
Last edited by hauntergeist (2009-04-11 20:55:56)

How to create Formula based value field in COPA

Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh R

The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas

How to build Perfctr 32-bit libray on 64-bit AMD machine

Dear all,
I have downloaded perfctrl library (used by "collect" tool) as this is required by collect tool for getting performance data from underline system.
from http://user.it.uu.se/~mikpe/linux/perfctr/2.6/perfctr-2.6.34.tar.gz
OS
Linux MyMachine 2.6.18-92.el5.src-PAPI #1 SMP Tue Jan 27 10:57:40 CET 2009 x86_64 x86_64 x86_64 GNU/Linux
Architecture
AMD 64 bits (Family 10h) or x86_64
I am using Java version
$ java -version
java version "1.6.0_10"
Java(TM) SE Runtime Environment (build 1.6.0_10-b33)
Java HotSpot(TM) Server VM (build 11.0-b15, mixed mode)
My question is that when i install using defaults, perfctr user library installs 64-bit of libray version that can be used with 64-bit JVM
but i need to use or get performance data using "collect" tool and 32-bit JVM, for that i think i need 32-bit version of "perfctr" library
So i want to know can any body kindly tell me how to build 32-bit "perfctl" library on my system.
Many Thanks

You are correct - you will need to build a 32-bit perfctr user library to profile 32-bit applications.
The analyzer team has only built this library on 32-bit systems (and copied the library to the 64-bit systems). Some users have built the 32-bit version on 64-bit system, but we don't know the specific changes they made to the perctr build. I'm sorry I couldn't be more help at this time.

How to build my own SELECT-OPTIONS?

Hi experts,
I hv 4 values like for a field, (say VBAK-BNAME),
NAME_A
NAME_D
NAME_M
NAME_Z
My selection- screen is like,
SELECT-OPTIONS: MANAGER FOR VBAK-BNAME.
So,
1) How to build the SELECT-OPTIONS table in my ABAP code?
I mean, if the user enters the NAME_A TO NAME_Z in select-options, the system shuld take in-between NAMEs also!
(Actually, I thiught that, the SAP will take care of building the select-options table based on Alphabetical Order, but, When I observed in debug mode, its not like that!)
2) And Where I hv to write the code for building select-options? I mean, Is it DATA DECLARATION part, AT SELECTION SCREEN or AT SELECTION SCREEN OUTPUT or START OF SELECTION?
thanq.
Message was edited by:
Sridhar
Message was edited by:
Sridhar

Hi,
Pls. suggest me other than RANGES?
Well, if you don't want to use RANGE then you can do it at SELECT statement.
SELECT BNAME
INTO TABLE ITAB
FROM VBAK
WHERE BNAME IN ( NAME_A, NAME_D, NAME_M, NAME_Z )
OR
SELECT BNAME
INTO TABLE ITAB
FROM VBAK
WHERE BNAME BETWEEN 'NAME_A' AND 'NAME_Z'.
2) under which event i hv to write it?
If you are using in SELECT statement, then you use at START-OF-SELECTION.
If you are buiding RANGE, then you can use at any events such as INITIALIZATION, AT SELECTION-SCREEN OUTPUT, START-OF-SELECTION, etc.
Regards,
Ferry Lianto

How to build a plug-in for FCP

I want to build an export plug-in for FCP. It is a little similar to Automatic duck export plug-in. I want to export sequence in my own format.
The version of Final Cut Pro is 6.0.
I downloaded FxPlug SDK, but it is only about video effect, not what i want.
And I didn’t find any other documents about how to build an export plug-in for FCP.
Who has some related documents or can support me on this?
I will pay for the help if i can afford it.

I don't own Automatic Duck so I don't know how that particular application goes about doing this, but the only way I can think of doing it is through a QuickTime Export Component.
http://developer.apple.com/documentation/QuickTime/Rm/ImportExport/DataExchange/ A-Intro/chapter1_section1.html

How to build a query to join on two tables without mapping

I did Automatic mapping by the workbench Directofield mapping with the table and java object.
Wanted to build a simple join query by joining on the same field on both the tables.Not the sql query through the toplink using expression builder.
Please help.............
Spent one full day for this................

Thanks Don for the reply,sorry to bug you,but i need help.....
SELECT A.AGNCY_C,
     A.TYPE_C,
     A.RESN_C,
     A.S_TYPE_C,
     A.SUB_ID_C,
     A.RY_C
FROM RATING A, REF B
WHERE A.ID_C = B._ID_C
AND A.ALPHA_C = B.ALPHA_C
AND A.EFF_D >= B.MATURITY_D
This is the real query i was talking about.I did mapping automatically through the workbench,generated java classes also throught the workbench.
Now they don't want to execute the raw sql.They wanted to get all the RATING objects with the where condition.
So how to build a query by using toplink.
tried your example
ExpressionBuilder builder = new ExpressionBuilder();
Expression creditRating = builder.getTable("RATING").getField("ID_C");
Expression issue_ref = builder.getTable("REF").getField("ID_C");
Expression join = creditRating.equal(issue_ref);
I am getting java.lang.OutOfMemoryError
error.
I selected the option generate classes and descriptors
from the tables (RATING,REF).,so it created the classes and dscriptors automatically.
In Database script for the table RATING like this
ALTER TABLE RATING ADD (
CONSTRAINT RATING_F1 FOREIGN KEY (ID_C, ALPHA_C)
REFERENCES REF (ID_C,ALPHA_C));
I think when i generate descriptor automatically it is keeping this association.
Please help me.........

How to build formula?

Similar Messages

Maybe you are looking for