How to build Table of Content in Crystal Reports

Hi,
Initially, I am looking for an article about how to build Table of Content in Crystal Reports in table-based approach----including how to write to DB table from report:
http://support.businessobjects.com/library/kbase/articles/c2011950.asp
However, the link above is invalid. I also searched through SDN articles, but no luck.
Can someone please forward me the link if you happend to know?---does not have to link to this specific article, any working solution is just fine.
I am aware of another approach which put the TOC to the end of the report(http://www.ml-consult.co.uk/cryst-05.htm), which probably does not satisfy the requirement.
If you have other solutions, your share is greatly appreciated.
Thanks a ton!

[Is it possible to create a table of contents in Crystal Reports?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333133303330%7D.do]

Similar Messages

How to create a clickable Table of contents using Crystal Reports 8.5

How to create a clickable Table of contents using Crystal Reports 8.5. I was able to create the table of contents using subreport and temporary table. but not able to link to the pages.
how to make it clickable ?
-Vivek

Hi Vivek,
To you may create on demand sub report.
In main report only the link will be shown when you click on the link the sub report will be opened in a new tab.
It can be placed in a Group header and to show the data for that particular group only.
Click on the Help menu in the crystal Reports Designer and open the Crystal Reports Help
Go to Index tab and type in subreport
Select Creating On demand you will get lot of information on that.
Please let us know if that is enough to solve your problem
Regards,
Aditya Joshi

How to build table join query in Jdeveloper

Hi,
Can someone tell me how to build table join query in Jdeveloper's Expression Builder UI?

[Is it possible to create a table of contents in Crystal Reports?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333133303330%7D.do]

How to change table of content font in captivate 6

Hi There,
Can somebody please suggest me how to change table of Content Text font English to Arabic in Captivate 6 and which font supports Arabic language.
Please refer below image, highlighted text font should be changed.
Looking forward for help.
Thanks,
Srikanth

The weird sliding navigation is Apples pride and joy!
That TOC allows you to slide between chapters, sections and pages.
iBooks Authjor was designed to do what it does and what Apple wanted it to do.
Some things can be changed during the books production, but the " weird navigation" is not something you can change to do what you want.
iBooks Author is does not produce ePubs.. at least not as "ePub" is known from Pages, inDesign etc,.
If you want what is available in ePubs.. then iBooks Author is not the application to produce it.
You could drag a section page above chapter on and create an index type page using book marks for links - but whats the point?
People using iPads and familiar with iBooksAuthors special way of book presentation.. are quite happy its so easy to use.

How to center the content in crystal report viewer?

open crystal report viewer in winform, default at the left top
after maxmium the winform window, content become at the center
another odd thing is that i set window winform size 1208*1024 and crystal report view is fill
then tried, content is not center any more
How to center the content in crystal report viewer in code?
Edited by: Mathew_666 on Oct 6, 2011 5:20 AM

Since there is no control for center you'll need to do the math on your own. This is just a rough draft, but you'll get the idea.
One of the things you'll need to figure out is your buffer to help you give a centered feel. We'll say that value is 50 in this case.
Height
int buffer = 50;
int formHeight = 1000; // we'll assume a height of 1000 in this case
int crystalTop = buffer;
int crystalViewerHeight = formHeight - (buffer * 2); // buffer is at the top and bottom
Width
int formWidth = 1000; // we'll assume a width of 1000 in this case
int crystalLeft = buffer;
int crystalViewerWidth = formWidth - (buffer * 2); // buffer is at the top and bottom

How do I create table of contents in the reports

Hi,
Can I create a table of contents in the report?
for example:
Name page
Jack ___________________________________25
Mat ____________________________________29
Please let me know.
Thanks,
Ratna

Hi!
I would try to use a (temporary) table with needed Columns for
output. Then fill this table using SRW.DO_SQL in a trigger.
Greetings - Hajo

How to suppress a blank section in crystal report

how to suppress a blank section in crystal report. although i have set the property
"suppress blank section "=true ,still i m unable to suppress my section
please help me to cope up this issue.
thanks in advance

One recommendation I make, when troubleshooting suppression issues, is to put a visible border of the section, area or object to be suppressed, and borders for all objects contained in the section or area. This will help isolate what's suppressed, and whether the section is truly blank or has content that's blank.
Furthermore, I recommend indicating which SDK and what version you're using when posting.
Sincerely,
Ted Ueda

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

How to use a connection ODBC in crystal reports viewer?

Hi Guys!
I need to know if for update a report in crystal reports viewer, is necessary, have a connection SAP Business Objects Business Intelligence. How to use a connection ODBC in crystal reports viewer?

Hi Guys!
I need to know if for update a report in crystal reports viewer, is necessary, have a connection SAP Business Objects Business Intelligence. How to use a connection ODBC in crystal reports viewer?

Not able to Access R/3 Tables, Function Modules through Crystal Reports

Hi Gurus,
I am working on Crystal Reports 2008 - V12.2.0, When I am trying to connect SAP R/3 system through the Data connectivity SAP Table,Cluster or FM,
I could see only the very few tables , and cannot see all Tables and not any Info sets or Function Modules,
But, I can access BW system, problem facing only with SAP R/3 system,
Suggest me on this,
Thanks
Siva

Hey here..,,
There is a limitation to show all Tables, Function Modules in Crystal reports for R/3. To see them,
In Options:
You will see Table_Name Like%: Text box, go there and give the starting or ending characters of FM's.
Eg: Z% or %Z
Then Click on Ok.
Now try to connect to R/3 again or Refresh the Connection, it will list out as you opted.
Hope it should help you.
Thank You!!

How to use drill down option in Crystal Report

Dear all,
I want to know how to use drill down option in Crystal report 2008. In below i have explained my screnario
For example
My scenario is. In crystal report I have Purchase order like PO101,PO102. Each purchase order have 5 line items. If i drill down each purchase order it should display line item in crystal report.
Regards,
Baskaran.

hi,
Create a Group on 'Purchase order'.
Group Expert -> Select the Purchase Order and Click the arrow button such that it appears right side. Click ok.
GH1 is inserted.
Your detail section should include 'Line items' fields.
Right Click 'Detail' section on left hand side, Click 'Hide (Drill down Ok)'.
Now you will see only 'Purchase order's in Group Headers.
Now when you click on a particular order, you will see respective line items.
Regards,
Vamsee

How to view the History of a Crystal Reports iView in EP6?

How to view the History of a Crystal Reports iView in EP6?
Our Crystal reports are viewed via Crystal Enterprise and are both BW and non-BW Crystal reports.
I have looked at the three supplied iViews from Business Objects (alert, folder and thumbnail) but I have only been able to access the last instance or run on demand a CR.
Our users would prefer to see a listing of the past runs of the report and choose which report to view. What parameters need set in the EP6 iView to see the history of a report?

Hi Heather,
it is correct that there is no sample iView that shows the History of Crystal Reports that are stored in Crystal Enterprise but there a sample codes on our web site and there are sample codes as part of the SDK documentation that show how to call the history and you should be able to take the code and create your own Java or ASP iView based on that.
the link to our developer library :
http://www.businessobjects.com/products/dev_zone/default.asp?intcmp=products12
hope this helps
Ingo

How to increase the width of the Crystal Report

Hello All
How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
CrystalReports version 10.2.3600.0
Thanks in advance
Srivatsa

HI Srivatsa,
You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
Insert and Suppress a Cross-Tab
1. On the 'Insert' menu, click 'Cross-Tab'.
2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
3. Click the 'Customize Style' tab and select the following check boxes:
" Suppress Empty Rows
" Suppress Empty Columns
" Suppress Row Grand Totals
" Suppress Column Grand Totals
4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
====================
NOTES:
" As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
" To increase or decrease the number of virtual pages do one of the following:
- Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
- Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
====================
How to Insert Fields on Virtual Pages
You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
1. Insert the field on the main page.
2. Click the 'Preview' tab.
3. Drag the right edge of the field to the right, onto the virtual page.
4. Drag the left edge of the field to the right, onto the virtual page.
Hope this helps!!
Regards,
Shweta

How to make table of contents linkable

Could someone tell me how to make the table of contents for my indesing book linkable? I've seen this in PDF documents before and assume it can be done using InDesign, but haven't been able to figure out how to do it.

gscortino1 wrote:
I need to have a Book Table of contents work as well as chapter Table of contents and also Ineractive elements all work when clicked in a PDF. How do I manage this? I can get the Table of Contents to work and no interactive elements or visa versa. I f I export to pdf Ptint I get both TOC to work but no buttons If I export to interactive I get only the Chapter TOC to work and the buttons but not the Book TOC. I know its a bug what is Adobe doing about it and when are we going to get a free fix?
What version of ID are you using? What export settings? As noted above, there is a bug, and what you want may not be posible at the moment.

Indesign to ebook-kindle: how to make table of contents link/jump to first page each chapter?

I have successfully completed the "ebooks: from adobe indesign to the kindle store.pdf"
I have InDesign CS 5, not 5.5.
I did the indesign doc - export to epub, then converted that epub in Calibre to MOBI format for kindle.
But how do I make a table of contents that link or jump to the beginning of its respective chapter head?
THANKS!!!

Yes, that fixed it, thanks! I had no idea they clashed like that. I ruthlessly purged all other tables of contents, and then used Layout > Table of Contents to create a new one, and it worked.
It made more sense after seeing in this thread that table of contents styles are more like presets or entities than styles.

How to build Table of Content in Crystal Reports

Similar Messages

Maybe you are looking for