How to create a clickable Table of contents using Crystal Reports 8.5

How to create a clickable Table of contents using Crystal Reports 8.5. I was able to create the table of contents using subreport and temporary table. but not able to link to the pages.
how to make it clickable ?
-Vivek

Hi Vivek,
To you may create on demand sub report.
In main report only the link will be shown when you click on the link the sub report will be opened in a new tab.
It can be placed in a Group header and to show the data for that particular group only.
Click on the Help menu in the crystal Reports Designer and open the Crystal Reports Help
Go to Index tab and type in subreport
Select Creating On demand you will get lot of information on that.
Please let us know if that is enough to solve your problem
Regards,
Aditya Joshi

Similar Messages

How to build Table of Content in Crystal Reports

Hi,
Initially, I am looking for an article about how to build Table of Content in Crystal Reports in table-based approach----including how to write to DB table from report:
http://support.businessobjects.com/library/kbase/articles/c2011950.asp
However, the link above is invalid. I also searched through SDN articles, but no luck.
Can someone please forward me the link if you happend to know?---does not have to link to this specific article, any working solution is just fine.
I am aware of another approach which put the TOC to the end of the report(http://www.ml-consult.co.uk/cryst-05.htm), which probably does not satisfy the requirement.
If you have other solutions, your share is greatly appreciated.
Thanks a ton!

[Is it possible to create a table of contents in Crystal Reports?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333133303330%7D.do]

Can anyone explain how to make a clickable table of content for my cookbook

I want a table of contents at the front of the book, then folks can click the recipe that they want to make and will automatically be paged forward to that exact recipe.

Sheri,
This isn't possible at the moment. Pages for iPad can only handle external links.

How to get the total page number when using Crystal Report in JSP

In my JSP, I use the class CrystalReportViewer to generate and display the report views. But this class only sypply the function to get the info of the active view.
Thus with this info, I only can get the active view's page number. How can I get the report total page number without showing the last page first?
Thanks.

Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

Can we create Multi Tabbed excel Sheet using Crystal Reports 2008

Hi,
We want to create a Crystal Report which will export the output as multiple Tab's ( we can use sub reports). Can we create a Multi Tabbed excel Sheet using Crystal Reports 2008 ( not Crystal reports Basic 2008). Please share any information/links on how to do that.
Also if it is not supported please let us know which version supports it.
Thanks,
Vasu

At least one of the 3rd-party Crystal Reports Desktop Scheduling tools listed at: http://www.kenhamady.com/bookmarks.html provides that functionality. It allows you to burst a single report so that each Group at level 1 becomes a separate tab. You can control the tab names (and tab colors) via fields/formulas inside the report.
You can also automate the process of exporting to (and also replacing or appending to) specified tabs inside existing workbooks.

How can I create an active table of content in the sidebar to help readers to get to the section?

How can I create an active table of content in the sidebar to help readers to get to the section?

You can create bookmarks with Adobe Acrobat.

How do I create table of contents in the reports

Hi,
Can I create a table of contents in the report?
for example:
Name page
Jack ___________________________________25
Mat ____________________________________29
Please let me know.
Thanks,
Ratna

Hi!
I would try to use a (temporary) table with needed Columns for
output. Then fill this table using SRW.DO_SQL in a trigger.
Greetings - Hajo

How do I make a table of contents for a collection of six short stories that is after the legal page and NOT in the front on an unnumbered page?

How do I make a table of contents for a collection of six short stories that is after the legal page and NOT in the front on an unnumbered page?
When I first started I made a title page and then pasted in my first story from a .TXT file. After cleaning up I went back to the front a couple of empty lines ahead of the story and typed in the story title. Unlarged the font size and centered it, then

You can't do that. This is what the Pages User Guide, downloadable from your Pages Help menu, says:
Creating and Updating a Table of Contents
Each table of contents (TOC) you create using a Word Processing template lists only the content that follows it, up until the next table of contents. If you want a master table of contents for the entire document, it must be the only table of contents, and it must be at the beginning of the document.
You can do it manually though.

How to create a temp table in the memory, not in disk?

in sql server, you can create a temp table in the memory instead of disk,
then you can do the insert, delete,update and select on it.
after finishing, just release it.
in Oracle,
I am wonderfing how to create a temp table in the memory, not in disk?
thanks,

Thanks for rectifying me Howard.
I just read your full article on this too and its very well explained here:
http://www.dizwell.com/prod/node/357
Few lines from your article
It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they donâ€™t swamp themselves, and start causing each other to age out back to disk.
Thanks and Regards

How to create a clickable hyperlink in iCloud Numbers?

How to create a clickable hyperlink in iCloud Numbers?

There is no such thing. All you could do is create an HTML e-mail, but many users won't even view it in that mode for security reasons and it may get filtered. Similarly, Flash-based content may get removed/ not show up. So at best, if you really want to get a clickable document, you could use a PDF file containing a link. but did i mention that the user can suppress those, too? Well, sorry, but you are SOL. You want something that for a million reasons nobodyy can give you. The best you can do, as always, is host your content on a proper website and send peopel a link to it...
Mylenium

How can I generate a table of contents from bookmarks

How can I generate a Table of Contents from bookmarks in Adobe Acrobat XI?

Something to try.
Rick Bostein provided a "Create Bookmark Report" Acrobat Action.
With this report as a PDF you could insert it at the start of your PDF document to serve as a "TOC".
Go here:
https://acrobatusers.com/actions-exchange
Scroll down some.
Be well...

How To: Create a link to gatewayed content (e.g. in email)

I apologize if this is too basic of a question but I can't find any results after looking for several hours.
I would like to generate a URL in an email that points to the portal and a specific portlet in the portal. The portlet has limited access rights so the URL should cause the portal to go through the login page and then redirect to the portlet. Can anyone point me to the documentation that describes this or give me an example?
Thanks in advance!
Mike

Using the PTARGS might also solve another difficulty I've encountered passing (dynamic) querystring parms to portlets through the gateway. Your example seems to work great for portlets, but now trying to access a Community page containing a portlet to retain branding elements.
For portal pages, should the ObjectID be the pageID (i.e PageID=0 for the default page) or is the ObjectID for a community page some other value (where in PlumDB is this stored) ? I changed the ClassIDView to 514 which should indicate a Community Page but it's still not loading my page. Adding to my confusion, the PTCOMMPAGES table stores the PageID as a negative value.
Here's my example:
http://portalserver/portal/server.pt/gateway/PTARGS_0_0_0_201_0_514/http%3B/portletserver/ApplicationName/default.aspx?querystring=value
Any thoughts?
re: How To: Create a link to gatewayed content (e.g. in email) Posted by Mike Beniston 5/5/05 9:45:40 AM It turned out that I was pretty close.
If anyone else is interested, here is one way that works.
The PTARGS are _0_userid(leave at 0)_objectid(of portlet)_communityID(if any)_0_ClassIDView(43 = view for portlet)
"http://portalserver/portal/server.pt/gateway/PTARGS_0_0_348_208_0_43/http://portletserver/ApplicationName/pagename?querystring arguments.

How to update alt layout tables of contents

I'm having trouble with alternate layouts and tables of contents.
After creating a 6 page document, I created an alternate layout. The content from the primary document was linked to the new layout.
Some modifications were made to the alternate layout, which involved positioning some paragraph styles onto a different page.
When the alternate layout was exported as an interactive PDF, the table of contents indicated it was hyperlinked because the mouse cursor would change to a hand when hovering over the respective table of contents entry, however when clicked, the PDF simply remained on the same page.
As one potential solution, I created an additional table of contents and made certain to use the heading styles that were relevant to the alternate layout.
When I would generate a new table of contents for the alternate layout, only the table of contents title appeared and no additional paragraph styles were included in the table of contents.
Is there a special way that I need to get the table of contents to work properly using an alternate layout.
I am a Lynda.com subscriber, so please feel free to refer me to a video that may answer my questions.
I have been looking through the Adobe help, and if the answer to my question is there, I'm overlooking it because I'm overwhelmed with information (and possibly the stress of the print deadline which is later today).
Any help would be greatly appreciated.
Thank you,
Buck

I am doing my final project. It uses the publish-subscribe mechanism. Publishers publish the messages and subscribers can get the messages by subscribing the topic they am interested in. When the subscriber get the messages , I built a java swing application to simulate a public screen to display these messages. That means this swing application is not interactive to the user. The swing window is just for displaying the information.( Imagine in the airport hall, you can look at the flight informaiton on the public screen).
What I want to achieve is that the swing window can automatically repeatedly display the messages. If the amount of messages is too much to display only one page, how it can be implemented to alternatively display multi-pages in one window? Scrollpanel is not useful for this aim. I think maybe I can use java.swing.timer. But this is the first time I try to use it. Some ideas?
I hope this is clear now.

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How do I get the table of contents to toggle? I opened it while reading one book I had checked out from my library, but it is still open when I start another book. I am using Adobe 4 and Windows 8.1 on my PC.

How do I get the table of contents to toggle? It has remained open since I opened it while reading two books ago. Thanks for the help.

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

How to create a clickable Table of contents using Crystal Reports 8.5

Similar Messages

Maybe you are looking for