How to call standard CRM transactions into Webdynpro component

Hi,
i have a requirement where i need to call the the standard CRM transaction like <i>activity worklist</i> and <i>activity creation</i> into the webdynpro component. Please let me know how to do it, would appreciate it, if provided with a sample code.
Thanks,
Suri

Hi Suri,
You could use suspend/resume mechanism to jump to the ITS version of these transactions (in case they are ITS-enabled). Starting the SAPGUI from within the browser environment, transferring data/starting a transaction and then returning to the browser is not possible.
Best regards,
Thomas

Similar Messages

How to call a CRM transaction from WDA component

I have requirement where i need to open the CRM transaction CRMD_BUS2000126 from WDA with the object id selected in the context. To be more specific all i need to do is to open the activity screen of a particular give activity number from a WDA component.
I have checked out the previous threads there is a solution how to fire a transaction from WDA, but i need to send a parameter to this transaction to open that particular activity number screen.
please advice asap.
Thanks,
Shyam

Karthikeyan,
Please make sure that flag attribute is under some node, say NODEA. NOW please select the interface node property and input element of NODEA.
now NODEA will be available in interface controller. Interface controller acts like a global controller between two different components.
So from interface controller you can take that flag value.
pls reply back if you have any confusion.
Regards
Srinivas

How to Call SAP ECC transactions into CRM IC Webclient Profile Screen

Dear all,
We are implementing IC Webclient application for our Clientu2019s call center operations.
All sales related activities are being created in back end SAP ECC system like, starting from Quotation to Sales Order, Deliveries and Billing.
Client wants to see all relevant ECC reports of Sales transactions in IC Webclient Screen.
Connectivity between SAP CRM and ECC has already been established and we did all basic configuration for IC Webclient, but donu2019t know how to and where to call ECC transaction in IC Webclient Screen.
I am looking for suggestions from any of you to handle this requirement successfully. I would be grateful if you send me any documentation which addresses this requirement.
Your suggestions and help will be highly appreciated.
Thank you,
Raghu ram.

Hi,
Step-by-step process for the same is as follows:
1. Create a launch transaction to launch the relevant BOR object at the following
IMG->CRM->IC WebClient->Basic Functions->Transaction launcher -> Configure Transaction Launcher (Wizard).
This wizard is very useful and easy way to create a launch transaction and guides through each step and generates a handler class for you.
2. This transaction now has to be incorporated in the Navigation bar. For this you have to create navigation bar entry and navigation bar profile.
IMG-> CRM-> IC WebClient->Basic Functions -> Define Navigation Bar Profiles
Here you have to first Define Entries where you would input Launch transaction ID created in step 1 and then Define the Navigation Bar Profile.
3. Assign the Navigation bar profile to IC WebClient profile.
Please note that you can you Transaction launcher for incorporating any web links, PCUI Transactions, CRM Transactions, ERP transactions etc.
Regards,
Deepak

How to call Standard Iviews in Webdynpro application?

How to call STD iviews in the wwbdynpro application.
can any of friends give the code

Use this snippet to call standard iviews from your webdynpro code :
//use LinktoAction UI element
onActionClick (com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent)
WDPortalNavigation.navigateAbsolute("ROLES://portal_content/folders/X.Iview", WDPortalNavigationMode.SHOW_INPLACE, (String)null, (String)null, WDPortalNavigationHistoryMode.NO_DUPLICATIONS, "Called iView Name", (String)null, (String)null);
Hope this helps.
Rgds
Prabhakar

Can we call an SAP transaction in Webdynpro

Hi,
I have a requirement to call an SAP transaction in Webdynpro, ie on clicking a button in a view, the particular SAP transaction has to come . Kindly tell me how to do it.
Regards,
Lakshmi

Lakshmi,
You cannot call a transaction from WDA
check these threads
https://forums.sdn.sap.com/click.jspa?searchID=19319106&messageID=6146192
https://forums.sdn.sap.com/click.jspa?searchID=19319106&messageID=6476084
Thanks
Bala Duvvuri

How to divide the CRM transaction data by company cord?

How to divide the CRM transaction data by company cord?
CRM transaction have not company cord, so how to divide the data on BI report by company cord?
Do I have to get the sales organization from customer master?
Some transactions have not master data like lead. I want to know your experience.

Hi
This is self reply.
I should use the sales organization instead of company cord.
But some business like lead from contact from customer can not separate the company, in situation one call center for multiple companies.
We should use another field to divide the company. Ex. Product, campaign, etc.
If someone knows better way to solve this issue, let me know the reply.
Regard
u1

Can any body tell me how to pull SAP-CRM data into BW

Hi BW guru`s,
Does anybody tell me how to pull SAP-CRM data into BW.
Is there any configuaration setings takes place in CRM system or BW system?
Provide few of CRM datasources names (Transaction data Datasources)
Please explain indetail and give some examples.
Thanks in advance,
venkat

Hi.......
SAP CRM uses BW Adapter to extract data from SAP CRM and send it to SAP Business Information Warehouse and SAP NetWeaver Business Intelligence. For mBDocs, BW Adapter extracts objects for CRM business transactions and CRM billing use the BAdI CRM_BWA_MFLOW. However, in releases prior to SAP CRM 2005, after using transaction code RSA5 to activate business content in SAP CRM, you must use transaction code BWA5 to activate the business content for the BW Adapter.
Check this link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
Hope this helps you.........
Regards,
Debjani........

How to call standard report with in zprogram?

Hi Sap experts,
How to call standard report with in zprogram.
For example if country is 'US' then call Zprogram(zprog_US).Inside zprogram call standard report(rhecm_change_proc_status).If country is 'CA' then call zprogram.Inside zprogram call standard report.For same othercountres like 'PR','GB','ES'.Actually HR_ECM_READ_FEATURE_CARGP will having the input as employee id and will return the CAREA(County like 'US','PR'......).Kindly help me what is the procedure?
Regards,
Sujan

>
sujan T wrote:
> Thanks for your reply.
>
> What is the logic to call the standard report from zprogram?Inside the zpogram how to call standard report?
>
> Regards,
> Sujan
no special logic is required
If u want to use
RPUAUDOO IN THE ZREPORT.
Put the submit button where ever required
ex: In zreport after certain process reacedu want to call then use
submit rpuaudoo and return.
Regards
Sas

Urgent!! How to call a custom transaction or an ABAP program in BSP?

Urgent!! How to call a custom transaction or an ABAP program in BSP?
We are pretty new on BSP. Would be very appreciated if any expert here give us the detailed steps on how to build up the application to just call a custom transaction (e.g., t-code: ztest) or an ABAP program. Would we have to create a button or event handler to do that? And the detailed steps?
Thanks in advance and we will definately give you reward points!

hi Durairaj,
During the time to wait for your answer, we copied Bernd's code from your last link, but when activating it, get the 1st error msg:
Field "CLIENT" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "DATA" statement."DATA" statement. The error shows up here:
<td>
<htmlb:inputField id = "client"
value = "<%= client %>" />
</td>
Then we added Client to the page attribute and define it as type String, then get another error:
The field "EVENT" is unknown, but there is a field with the similar name "EVENT_ID"."EVENT_ID". This error shows up at the beginning in the Event Handler:
OnInputProcessing:
code
event handler for checking and processing user input and
for defining navigation
event handler for data retrieval
event = cl_htmlb_manager=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
button_event ?= event.
How to resolve this unknown Event error, need to define in Page Attribute tab? but with what type?
Actually we only want to run an ABAP4 program in BSP, the code is complicated, could you show us an easy way of doing this in BSP?

How to get the floor plan in Webdynpro component ?

Hi,
How to get the floor plan in Webdynpro component ?
Best Regards,
Tripathi

Hi,
Just copy the templates from Webdynpro Component by choosing OIF or GAF or QAF template.
Regards,
Bansidahr

How to call particular ecc transaction directly into IC Webclient

Dear all,
We have called ECC Transaction into IC Webclient, but instead of showing the particular transaction like VA05N, system showing the ECC system Easy access screen.
I want call directly the required transaction, and dont want to access though the sap main menu.
Please help to solve this problem, your suggestions will be highly appreciated.
Best wishes,
Raghu ram

Hi Raghu,
Are you calling the execute method ?. I think you have to give the method name as execute ( in the wizard of TL )
for confirming the same please go to SWO1 transaction, and give the BOR object name that you have created, now click execute / test button.
it will ask for the T-code to be executed,, give the ECC t-code
now ,, run the method execute ( one among the three methods TSTC have ).
you should able to see the ECC transaction opened for you..
if this happens I am sure that some all you need to do is some minor changes in TL wizard!.
Tip: I think u missed the method name while configuring the TL.
Hope it Helps..
Regards, Sudeep..

How to integrate 2 diff transactions into one

Hi All,
I have a requirement to combine trasaction FBPM(SAPFPAYM) & Z_ACHEMAIL(RFFOAVIS_FPAYM) transactions into single transaction i.e As soon as the file is released through transaction code FBPM then the email notifications should be sent automatically(RFFOAVIS_FPAYM).
But when i try to use
call trasaction FBPM.
call trasaction Z_ACHEMAIL. One after other in my z program its not executing both at a time since both are having diff selection screen. its only executing FBPM transaction, its unbling me to press back button to get into Z_ACHEMAIL AND again i need to execute.So please let me know ur ideas how can i achieve this.
Thanks in advance.
Regards,
Rajesh

Hi Vishal,
You could try using the SUBMIT statement. Through this statement you can pass parameters to the selection screen of the second transaction, however instead of the name of the transaction you'll need to pass the name of the program. Check the documentation for more detail.
Hope it helps.
Regards,
Gilberto Li

How to call a SM35 transaction and run in BDC report.

Hi Experts,
I knew that how to call a transaction but here, I've to call the SM35 transaction ,which have my BRS BDC recording, to run my session.
Pls help me how to call the transaction and run/process the first session tab in the table control of SM35 window.
thanks & regards
sankar.

Hi,
Look up this example..here v have recorded one transaction & running it throough BDC report programming.
report ZBDC_16JUL2008
       no standard page heading line-size 255.
include bdcrecx1.
DATA : BEGIN OF it_tab OCCURS 0,
         LIFNR(016),
         BUKRS(004),
         KTOKK(004),
         NAME1(035),
         SORTL(010),
         STRAS(035),
         PFACH(010),
         ORT01(035),
         LAND1(003),
         REGIO(003),
         SPRAS(002),
         TELF1(016),
         AKONT(010),
         FDGRV(010),
       END OF it_tab.
start-of-selection.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE                      = ' '
   FILENAME                      = 'D:\'
   FILETYPE                      = 'ASC'
ITEM                          = ' '
FILEMASK_MASK                 = ' '
FILEMASK_TEXT                 = ' '
FILETYPE_NO_CHANGE            = ' '
FILEMASK_ALL                  = ' '
FILETYPE_NO_SHOW              = ' '
LINE_EXIT                     = ' '
USER_FORM                     = ' '
USER_PROG                     = ' '
SILENT                        = 'S'
IMPORTING
FILESIZE                      =
CANCEL                        =
ACT_FILENAME                  =
ACT_FILETYPE                  =
TABLES
    data_tab                      = it_tab
EXCEPTIONS
   CONVERSION_ERROR              = 1
   INVALID_TABLE_WIDTH           = 2
   INVALID_TYPE                  = 3
   NO_BATCH                      = 4
   UNKNOWN_ERROR                 = 5
   GUI_REFUSE_FILETRANSFER       = 6
   OTHERS                        = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
LOOP at it_tab.
perform bdc_dynpro      using 'SAPMF02K' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-KTOKK'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              it_tab-LIFNR.
perform bdc_field       using 'RF02K-BUKRS'
                              it_tab-BUKRS.
perform bdc_field       using 'RF02K-KTOKK'
                              it_tab-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-TELF1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              it_tab-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                              it_tab-SORTL.
perform bdc_field       using 'LFA1-STRAS'
                              it_tab-STRAS.
perform bdc_field       using 'LFA1-PFACH'
                              it_tab-PFACH.
perform bdc_field       using 'LFA1-ORT01'
                              it_tab-ORT01.
perform bdc_field       using 'LFA1-LAND1'
                              it_tab-LAND1.
perform bdc_field       using 'LFA1-REGIO'
                              it_tab-REGIO.
perform bdc_field       using 'LFA1-SPRAS'
                              it_tab-SPRAS.
perform bdc_field       using 'LFA1-TELF1'
                              it_tab-TELF1.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-VBUND'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '=UPDA'.
perform bdc_field       using 'LFB1-AKONT'
                              it_tab-AKONT.
perform bdc_transaction using 'FK01'.
ENDLOOP.
perform close_group.

How to call standard ITS service from custom ITS service

Hi,
I have a requierement in ITS where I need to call standard ITS service(CATW) from custom service upon clicking on Accept button. how to achieve this?
Thanks in advance.

Hi Sarada Nukala,
You can call the service url from first service button. To get this url, from SICF transaction, test service and a browser is opened.
Hope this helps,
Iván.

How to Call Standard PO Form in my Z program

Hi All,
Could you please tell me, How to Call the Standard PO form in my Z program for print priview and printing.
My requirement is :
Create Z program with PO Number as Selection screen.When we give the PO Number and Press execute it will show the print priview with printer option.
Thanks & Regards
Murali

Plz refer this.
REPORT ZPPR_BOM1.
TABLES
TABLES : MAST. " Material to BOM Link
*& Internal tables         Begin with it_
DATA : IT_MAST TYPE MAST OCCURS 0 WITH HEADER LINE.
DATA: fm_name TYPE rs38l_fnam.
CLEAR   : IT_MAST.
REFRESH : IT_MAST.
*& Parameters       Begin with pr_
*& Select-options   Begin with so_
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: PR_MATNR LIKE MAST-MATNR OBLIGATORY,
             PR_WERKS LIKE MAST-WERKS OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
SELECT * FROM MAST INTO TABLE IT_MAST   " Get BOM number
    WHERE MATNR = PR_MATNR
      AND WERKS = PR_WERKS.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname = 'ZPPS_BOM1'
    IMPORTING
      fm_name = fm_name.
CALL FUNCTION fm_name "'/1BCDWB/SF00000079'
EXPORTING
   ARCHIVE_INDEX              =
   ARCHIVE_INDEX_TAB          =
   ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         =
   MAIL_APPL_OBJ              =
   MAIL_RECIPIENT             =
   MAIL_SENDER                =
   OUTPUT_OPTIONS             =
   USER_SETTINGS              = 'X'
IMPORTING
   DOCUMENT_OUTPUT_INFO       =
   JOB_OUTPUT_INFO            =
   JOB_OUTPUT_OPTIONS         =
   TABLES
     IT_MAST                    = it_mast
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to call standard CRM transactions into Webdynpro component

Similar Messages

Maybe you are looking for