How to integrate 2 diff transactions into one

Hi All,
I have a requirement to combine trasaction FBPM(SAPFPAYM) & Z_ACHEMAIL(RFFOAVIS_FPAYM) transactions into single transaction i.e As soon as the file is released through transaction code FBPM then the email notifications should be sent automatically(RFFOAVIS_FPAYM).
But when i try to use
call trasaction FBPM.
call trasaction Z_ACHEMAIL. One after other in my z program its not executing both at a time since both are having diff selection screen. its only executing FBPM transaction, its unbling me to press back button to get into Z_ACHEMAIL AND again i need to execute.So please let me know ur ideas how can i achieve this.
Thanks in advance.
Regards,
Rajesh

Hi Vishal,
You could try using the SUBMIT statement. Through this statement you can pass parameters to the selection screen of the second transaction, however instead of the name of the transaction you'll need to pass the name of the program. Check the documentation for more detail.
Hope it helps.
Regards,
Gilberto Li

Similar Messages

  • How to combine 2 diff transactions into 1 transaction

    Hi All,
    I want to combine 2 diff transactions into single transaction so taht i can run these 2 at a time as a single transaction. Currently we have 2 diff transactions which we need to run one after anether. So we want to combine these 2 transactions as a single transaction. Is it possible, how we can do that. thanks in advance.
    Thanks,
    Vishal

    U can create a ABAP which calls the transaction one after another...and assign the new ABAP a transaction
    code using SE93.
    Basically the abap would like below.
    Report Ztrans.
    start-of-selection.
      call transaction ZT01.
      call transactin ZT02.
    Regards
    Anurag
    Message was edited by: Anurag Bankley

  • Integrate Multiple BPEL Process into one project

    Hi,
    Can anyone help for the following problem?
    We created different BPEL process.One bpel process calls the another bpel process internally .
    EX:
    process1,process2 and process3.
    In side process1, I will call process2 and process3.
    I want to integrate all 3 process into one.
    Can anyone help how can i do this.
    Thanks in advance.
    Thanks,
    Bharath

    Can't you create a new process, copy everything between the main-scopes of the other processes to the new process (skip some of the receives and callbacks so you have 1 receive and 1 callback left), copy all the variables, namespaces, xsl mappings, and try again.
    it's more a bit of 'trial and error' and see what's left.
    Hope you can use this a bit.

  • I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album?

    I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location.  They are pictures taken at different times and have the same number I guess.

    In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
    If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
    LN

  • Have multiple accounts, how can I move all products into one account?

    have multiple accounts, how can I move all products into one account?

    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • How do I scan multiple pages into one document?

    How do I scan multiple pages into one document?
    HP Photosmart 5514-e-All-in-One Printer B111h
    Model CQ 183 A

    Hi,
    Have you tried this (using PDF format).
    Launch the scan from the HP Solution Center
    Click Change Settings.
    Select the desire Scan Shortcut, then click Save to file save options
    Make sure Create One File per scanned page... is Unchecked, Approve and perform the Scan.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do i scan multiple pages into one pdf file

    How do I scan multiple pages into one pdf file?

    That depends on your scanning software. Adobe Reader doesn't scan.

  • How do i put multiple albums into one huge album collection?

    How do i put multiple albums into one huge album collection?
    Some examples include: Linkin Park - Studio Collection, Michael Jackson - The Indisposable Collection

    Hi skullkrunch3r,
    Thanks for visiting Apple Support Communities.
    If you "Get Info" on the tracks that are part of your collection, you can use the Compilation option in iTunes.
    In iTunes 8 and later, you find the option to mark multiple items as "Part of a compilation" in the Options tab of the Multiple Item Information window.
    See this article for more information on marking your albums as part of a compilation:
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Best Regards,
    Jeremy

  • How do I scan multiple pages into one document using the CanoScan LiDE 200?

    How do I scan multiple pages into one document using the CanoScan LiDE 200?
    I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.

    Hi dagda24,
    You can scan multiple pages into a single document with the scan to PDF option.  Use the following steps to do so:
    1.  Open MP Navigator.
    2.  Click One Clcik.
    3.  Click Save to PC.
    4.  Change the File Type from PDF to PDF (multiple pages).
    5.  Make any other changes as needed, then click scan.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How Do I Combine Several Images Into One Image Which Contains Links To A Series Of Web Sites?

    How do I combine several images into one such that the combined image contains a series of web links? In particular, I’d like to create such an image and put it into my Outlook email signature. At present, as per the image below, I have at least six separate images in my email signature with each image containing a web link. Is Photoshop the best tool for this job? Or would it be easier to do this in some other package? I have three packages at my disposal: Photoshop, Ilustrator and Dreamweaver. Can someone please explain in detail how I would do this? Or perhaps someone could direct me to a link that explains how to do this. Thank you.

    Thank you for that correction, Hobotor. I admit I hadn't thought about an image map, in the context of someone who doesn't seem to know HTML very well...  My thinking was running along the use of the Photoshop Slice Tool to get most of the way there...
    To expand on the above, if you were to slice up your image using the Slice Tool, say like this:
    Save for Web & Devices will create the HTML and save all the sub-images.
    Then you edit the HTML and add a (hypertext link) elements surrounding the various images.  Only thing is you'll have to set the border-style of the images to none.
    For example:
    <!-- Save for Web Slices () -->
    <table id="Table_01" width="554" border="0" cellpadding="0" cellspacing="0">
    <tr>
      <td colspan="10">
       <img id="Sig_01" style="border-style:none" src="images/Sig_01.jpg" width="554" height="56" alt="" /></td>
    </tr>
    <tr>
      <td colspan="10">
       <a href="http://www.GrahamsWebSite.com"><img id="Sig_02" style="border-style:none" src="images/Sig_02.jpg"
            width="554" height="43" alt="" /></a></td>
    </tr>
    etc.
    A full copy of the HTML and images can be found here...  View Source to see it as an example:
    http://Noel.ProDigitalSoftware.com/temp/Graham/Sig.html
    -Noel

  • Problems concerning "How to integrate MS Exchange Server into SAP EP"

    Hi,
    I want to realize the scenario in "How to integrate Microsoft Exchange Server into SAP Enterprise Portal" from the Microsoft-Website.
    We´re using SAP NetWeaver 04, SAP NetWeaver Portal 6.0.14.0.0 and KMC 6.0.14.2.0 and Microsoft Exchange Server 2000 SP3.
    I have created (as described in the document) the HTTP-System and a WebDAV RM. But the repository doesn´t appeaer in the KM-Content-iView.
    I checked the Component Monitor and got this error-message for "servers" (it was marked with a red square)
    last-error-3   2006-05-16T13:12:11Z: PROPFIND /public: 401 Access Denied
    last-error-4   2006-05-16T13:15:04Z: PROPFIND /public: 401 Access Denied
    last-error-6   2006-05-16T13:26:35Z: PROPFIND /public: 401 Access Denied
    errors   8
    last-error-2   2006-05-16T13:12:10Z: PROPFIND /public: 401 Access Denied
    requests   8
    last-error-7   2006-05-16T13:26:35Z: PROPFIND /public: 401 Access Denied
    bytes-per-second   0
    successes   0
    response-average   194
    last-error-1   2006-05-16T13:11:55Z: PROPFIND /public: 401 Access Denied
    last-error-0   2006-05-16T13:11:54Z: PROPFIND /public: 401 Access Denied
    last-error-5   2006-05-16T13:15:05Z: PROPFIND /public: 401 Access Denied
    failures   0
    Any idea, what´s wrong? And how to solve the problem.
    Thanks for help,
    Sven
    Message was edited by: Sven Keller

    Hi James,
    How can I check the KM ACLs/Security Zones?
    I had a look on "System Administration - System Configuration - Knowledge Management - Content Management - Repository Managers - Security Manager - WebDAV ACL Security Manager".
    There was just "WDAclSecurityManager" and the Permission Rendering Class was "com.sapportals.wcm.control.acl.ResourcePermissionControl".
    Or where do I have to look for the ACL?

  • How do I combine two regents into one in Logic Pro Arrange?

    how do I combine two regents into one in Logic Pro Arrange?

    Thanks for your input kcstudio. I would still be left with 2 regions although one after the other, on one track.
    I am trying to save steps of the way I am combining the info of 2 seperate regions into one: bouncing the 2 tracks then re-importing that audio back into the project. It would save a lot of time if you could just drag one region on top of the other
                                W.W.

  • HT1473 When downloading a CD album, if it contains different artists, the album is split up into separate albums/icons. How do I get all songs into one album (just like the original CD)?

    When downloading a CD album, if it contains different artists, the album is split up into separate albums/icons. How do I get all songs into one album (just like the original CD)?

    Generally, in iTunes, all you need to do is fill in an appropriate Album Artist to keep things together. For older iPods each track from the same album should have the same artist, or be marked as a compilation where appropriate. For iOS devices you may need to go to Settings > Music > Group By Album Artist > On.
    For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • How to package other jar files into one jar?

    How to package other jar files into one jar? How can i get the class in the inner jar file?

    Generally not a good idea. The Java runtime won't be able to load classes from those "inner" jars, you'd have to write your own classloader to do that. It's not a brilliant idea, generally, anyway, since the point of having lots of jars is to keep your application modular. Bundling them all together like that means you have to re-deploy the whole thing to fix, for instance, one small bug in one small library
    If you really want to do this, there's an Eclipse plugin called FatJar, but I urge you to consider whether you really want to do it first.

  • How do i convert multiple tracks into one large mp3?

    how do i convert multiple tracks into one large mp3?

    Hi,
    You can use an app such as Audacity or Join Together to create one larger file. If AAC file used instead of mp3, you could use GarageBand.
    If you have the original CD, you can join the tracks whilst re importing disc.
    Jim

Maybe you are looking for