How to call structure in query change mode

Hi Gurus,
How to call created structure in query change mode?
Is there any other methods?
Thanks in advance
Ramu

HI Ramu,
If ur structure is global then it will be available in the left panel in the structure tree, Just drag and drop into the rowns or colums. Make sure that the structure is saved as global.
Thanks
Khaja

Similar Messages

  • How to call a BW Query from an ABAP program?

    How to call a BW Query from an ABAP program?

    hi
    check this link
    /people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-i
    /people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-ii
    /people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
    hope this helps
    cheers

  • How to call a TopLink Query on ADF Page Load (onload)

    Hi,
    I am new to ADF wants to find out how to call a TopLink Query whenever a page loads. I saw SRDemo Sample but all the queries are bound to some kind of an action method i.e. clicking on a button executes a query etc. But I need to call a toplink query on my page load. Any small sample will help.
    Thanks

    Try this approach:
    http://blogs.oracle.com/shay/2007/07/25

  • Called form in query only mode shows messages....

    Hi All,
    I am calling a form (say B ) in query only mode from a main form (say A) . When i query the called form B , i get 5-6 alerts (which has to be acknowledged by the user) and messages of the same error type saying :
    "FRM-40208 : Form running in query only mode . Cannot change database fields. "
    I have a 100 forms to be called from the main form A. So, I prefer not to change anything in the called forms . I tried to set message_level in the form A and code the on-error / on-message triggers to avoid the messages being shown, but nothing is working . Is there anything I can do in Form A i.e the main form ???
    Thanking you in advance.

    Since the error messages are being generated by form B, it is unlikely you will be able to fix form B problem using form A. Unfortunately, you may have to fix each of the 100 called forms.

  • How to call a BI Query (side panel) with selections provided by "tags"?

    With regards to my previous post (has anyone already successfully integrated their own BI report in a side panel?) we're still not there yet. What we actually would like to do is call a BI Query in the side panel and have the variable for that report filled automatically via "wiring" (using a tag).
    Basically we have a BI Query on a Transient Provider which "calculates" a couple of key figures with regards to a document number (shipment). The reason being before a shipment is to be "sent out" it should meet a couple of requirements (which are not immediately visible within the standard screens) concerning (sales) value, weight, etc...
    We have successfully "tagged" the shipment number in the transactions concerned (VT01N - VT03N). Now, as per my previous post if we just add the BI Query as an analytic list component (WDC_BS_ANLY_LIST_ALV) we seem to be getting errors (as the variable is not passed on). To avoid the error, we have added a search component (FPM_SEARCH_UIBB).
    So, now we get a "selection screen" in which we manually need to fill a shipment number and when we do, the results are correctly displayed.
    Obviously, we would like to have this "variable" assignment to be done automatically via the tag.
    What are we missing here?

    found this document on using the FPM_SEARCH_UIBB http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f07c2765-4ee8-2e10-759b-ea7429a430bb?QuickLink=index&…
    if only such a (extremely detailed) document would exits on passing on the "tag" to the BI query variable (as that is not as straight forward)

  • How to make feild grey  in change mode

    Hi All ,
    I have a reuiremnt , In the module pool I am upadting the date , user name and time automatically by system parameters .
    Now I want to make these three feilds in grey mode always and rest other feilds in the screen should be in change mode .
    Can any one help me to resolve the issue .
    Thanks ,
    NJ

    Hi ,
    Thanks for the quick reply .
    I am new to SAP , Could you please tell me the clear steps ..
    When I go to module pool screen I will find the feilds as mentioned below .
    MODULE LISTE_INIT_WORKAREA.
        CHAIN.
    FIELD ZPFEPPVC-USNAM  .
    MODULE SET_UPDATE_FLAG ON CHAIN-REQUEST.
        ENDCHAIN.
    I doulble clicked on the FIELD ZPFEPPVC-USNAM  and I am finding a screen painter with screen number , Attributes tab , Element list tab and flow logic tab .
    After this I am not understanding where to go and select the program name .
    Please help me to resolve the issue .
    Thanks ,
    NJ

  • How to call both xacute query and xml query inside a single applet

    Hi,
    I am very new to XMII. Trying with a simple exercises now.
    1.  I have a Business Logic Transaction which will call external application using web services then it will get an output as xml and storing it in C:\.
    2. Then I created one xacute query which will call the transaction
    3. Then I created a xml query that will read the xml in c:\ and I too created a visual display template(ichart)  for it
    4. Created a html file -- created a applet , called all the 3 inside it. NOt getting any graph in IE
    5. But if I call only xml query and display query its working
    <b>following are my HTML file:</b>
    <html>
    <head>
    <meta name="GENERATOR" content="Microsoft FrontPage 5.0">
    <meta name="ProgId" content="FrontPage.Editor.Document">
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
    <title>Order Percent Complete</title>
    </head>
    <body>
    <p>
    <APPLET NAME="MyApplet" WIDTH="640" HEIGHT="400" CODE="iChart" CODEBASE="/Illuminator/Classes" ARCHIVE="illum8.zip" MAYSCRIPT>
    <PARAM NAME="QueryTemplate" VALUE="UserTemplates/POTxnTemplate">
    <PARAM NAME="QueryTemplate" VALUE="UserTemplates/POTemplate">
    <PARAM NAME="DisplayTemplate" VALUE="UserTemplates/POVisual">
    </APPLET>
    </p>
    </body>
    </html>
    6. In POTxnTemplate -- calling Transaction BL
        In POTemplate -- fetching xml from c:\
        In POVisual -- displaying the ichart (using POTemplate)
    Can any one help me with this?
    I am doing in the right path?
    Thanks in Advance,
    Murugappan.

    Hello,
    You can only enter one query template into an applet.  Use the xacute query template.  In the transaction assign the output of the web services results to a transaction property of type xml making sure you select the "Output Parameter?" option.  These results will need to be in xMII format.  Then open the xacute query template and verify that the output parameter you created is selected as an Output on the transaction tab.

  • How to call the same query more than once with different selection criteria

    Hi,
    Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
    Sales organization XX
                         Income 2008  Income 2009
    Customer A       10                 20
    Customer B        30                  0
    Sales organization YY
                         Income 2008  Income 2009
    Customer A        20                5
    Customer B        50                10
    Now, I need this. At the selection screen of query, user fill variable  charakteristic "Sales organization" with interval  XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
    Thank you very much
    J.

    Hello,
    thanks to all for cooperation. Finally we solved this issue with the following way..
    User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
    J.

  • How to call structure in Smartforms

    Hi,
    For single table in Smartforms,we will do...
    1)In form Interface,
    Parameter_name    Type_assignment   Associated_type
    itab               like             vbak
    2)In Main window ->Table->Data
    Loop...
    Operand....itab  into  itab...
    3)In Main Area->Row->Text
    &itab-vbeln& &itab-ernam&....
    It is working well in Abap editor by calling function module...
    For Multiple Table fields,How to do in smartforms?
    vbak-vbeln,vbap-posnr,kna1-kunnr....
    suppose i create one structure....
    data : begin of jtab occurs 0,
           vbeln like vbak-vbeln,
           posnr like vbap-posnr,
           kunnr like kna1-kunnr,
           end of jtab.
    where i will have to call this structure in Smartforms...
    In Global Definitions, How to configure this structure...

    Hi
    Define one table type  with these fields, and use this table type when declaring Form interface data in smartform.
    REF:
    You can create that structure in SE11
    extras ---> change table category -->> select structure radio button
    Reward if useful
    Thanks
    Krushna

  • How to upload Master data in Change mode

    Hi,
         I have inserted 3 vendors 1/2/3 in normal mode with BDC first. In these 3 vendors the Payment Terms code was not there initially. Then i created a flat file with the Ptems code for 3 vendors. But when i call MK02 to update, the fields do not get updated and i have to manually change them. Can anybody help me with the problem.

    Hi Sourav,
    Y cant u do in this way better to do recording for particular fields which u want to make changes (while recording go for mk02).
    Reward points if helpful.
    Thanks
    Naveen khan

  • How to call BI infocube / query in ABAP

    Hi guys,
    don't blame me for asking such simple questions. I am not familiar with BI, my requirement is to execute BI infocube / query and display the result in webDynpro ABAP. I know I can call BI query passing parameters and there are some web tools like RRW3_WEBRFC to call the query. What I simply want is to call a BI FM which execute query with parameters, the FM returns a internal table to me. So which FMs exist in BI to execute BI queries BEx?
    Thanks

    Hi,
    As mentioned by Arun you can use the FM. Please find the below link which shows a detailed way how to use this FM
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0865602-9f77-2d10-759c-fe1e0b1acb01?quicklink=index&overridelayout=true
    Regards,
    Raghavendra.

  • How to call a Bex query in ABAP

    Hi,buddies:
        Any body try to run a Bex query in ABAP and then get the result in text file etc...??
    Martin Xie

    Hello,
      Call this transaction in BW : RSCRM_BAPI.
    Download Query result in file format.
    This transaction is absulote.
    I hope it helps.
    Kishore

  • How to call a method in parallel mode

    Hi,
    I have a web application (ADF/JSF/EJB3) developed under jdev 11g
    I need to call a method in my backing bean but in parallel mode.
    The idea is that when the user click on a button to compute something i do not want the user to wait untill the process is finished.
    e.g.
    public String doSomeAction(){
    callMethodXY();
    return null;
    I do not want to wait until callMethodXY is finished to continue with my process.
    I just want to call it in parallel and continue working normally.
    Which is the best approach.
    Regards,
    Emile

    Emile,
    No, not my opinion at all. I was simply stating a fact that if you do this in another thread, you must not access FacesContext nor the binding container from that other thread - it's a technical limitation. If you have something that needs doing in the background, then a thread is a fine way to do it.
    John

  • Call Transaction "MIGO" in display mode only

    Hi friends,
    I have changed the standard the SAP standard program MB51 to a Customer Program 'ZMB51' based upon the user requirement.Iam able to get all the values (output)
    Now my requirement is .... iam trying to call transaction "MIGO" when the user clicks on the Material Document Number (MBLNR) (as how in Standard program)
    I ve used "ALV_GRID..." display. and given a callback_user_command also .... iam able to call the trasaction ...... but it is editable and not in the display mode ..........
    Here my code :
    FORM SY_UCOMM_FOR_MBLNR USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE
    SLIS_SELFIELD.
      IF RS_SELFIELD-FIELDNAME EQ 'MBLNR'.
      IF NOT RS_SELFIELD-VALUE IS INITIAL  AND
             RS_SELFIELD-VALUE NE SY-ULINE.
          CALL TRANSACTION 'MIGO'.
        ENDIF.
        IF R_UCOMM EQ SPACE.
        ENDIF.
      ENDIF.
    ENDFORM.                    " SY_UCOMM_FOR_MBLNR
    So ??????????????????
    What is the remedy ????
    Expecting ur answers....
    Thanks in Advance
    Cheers,
    R.Kripa.

    Hi ... it is solved ...
    I ve changed the code as how it was in MB51 report.
    Here is my code
    FORM SY_UCOMM_FOR_MBLNR USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE
    SLIS_SELFIELD.
      CASE RS_SELFIELD-TABNAME.
        WHEN 'I_FINAL'.
          READ TABLE I_FINAL INDEX RS_SELFIELD-TABINDEX.
      ENDCASE.
      CHECK SY-SUBRC = 0 .
      IF R_UCOMM = '&IC1'.
        CHECK RS_SELFIELD-TABNAME = 'I_FINAL'.
        CASE RS_SELFIELD-FIELDNAME.
          WHEN 'MBLNR'.
            SET PARAMETER ID 'MBN' FIELD I_FINAL-MBLNR.
            SET PARAMETER ID 'POS' FIELD I_FINAL-ZEILE.
            SET PARAMETER ID 'MJA' FIELD I_FINAL-MJAHR.
        ENDCASE.
        IF SY-SUBRC = 0.
          SELECT SINGLE * FROM MKPF
                    WHERE  MBLNR = I_FINAL-MBLNR
                      AND  MJAHR = I_FINAL-MJAHR.
          IF SY-SUBRC = 0.
    MIGO_DIALOG is a funcion module to set the MIGO transaction
    in Display mode.
            CALL FUNCTION 'MIGO_DIALOG'
              EXPORTING
                I_ACTION            = 'A04'
                I_REFDOC            = 'R02'
                I_NOTREE            = 'X'
                I_NO_AUTH_CHECK     = ' '
                I_DEADEND           = 'X'
                I_SKIP_FIRST_SCREEN = 'X'
                I_OKCODE            = 'OK_GO'
                I_MBLNR             = I_FINAL-MBLNR
                I_MJAHR             = I_FINAL-MJAHR
                I_ZEILE             = I_FINAL-ZEILE.
          ENDIF.
        ENDIF.
      ENDIF.
    But still if anyone knows how to call MIGo transaction i Display mode using 'CALL TRANSACTION 'MIGO''.
    Thanks friends,
    Cheers
    R.Krpia.

  • FRM-40208: Form running in query-only mode. Cannot change database fields.

    Hi,
    I am using forms 6i where it is calling a form from a menu in query like call_form(,query_only). Now an error is occurring on call of that form ‘FRM-40208: Form running in query-only mode. Cannot change database fields.’ Though this is been handled to give a certain message from on_error message from a package from library.
    Now the issue is that the error keeps on popping even after the ok button is pressed. There are number of records from the table. How can we handle the error. Any suggestion would be really appreciated!!!
    Regards,
    Rajesh

    thanks Gred but i have resolved the issue. it seems that each row was going into query_only mode (program written such a way). therefore the error was showing even after the OK button. handled the issue from ON_ERROR trigger. anyway thanks for your time Gred!

Maybe you are looking for