How to call a Bex query in ABAP

Hi,buddies:
Any body try to run a Bex query in ABAP and then get the result in text file etc...??
Martin Xie

Hello,
Call this transaction in BW : RSCRM_BAPI.
Download Query result in file format.
This transaction is absulote.
I hope it helps.
Kishore

Similar Messages

How to call BI infocube / query in ABAP

Hi guys,
don't blame me for asking such simple questions. I am not familiar with BI, my requirement is to execute BI infocube / query and display the result in webDynpro ABAP. I know I can call BI query passing parameters and there are some web tools like RRW3_WEBRFC to call the query. What I simply want is to call a BI FM which execute query with parameters, the FM returns a internal table to me. So which FMs exist in BI to execute BI queries BEx?
Thanks

Hi,
As mentioned by Arun you can use the FM. Please find the below link which shows a detailed way how to use this FM
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0865602-9f77-2d10-759c-fe1e0b1acb01?quicklink=index&overridelayout=true
Regards,
Raghavendra.

Bex Query in ABAP report

Can i call a BEx query in ABAP report and display in ALV grid. if so please give me the syntax.
Thanks
Akila.R

Look at the FM "RSDRI_INFOPROV_READ".
With this you can read data into a internal table of your program.
With this FM, you can do a selective read and select only the key figures and characteristics that you wish to read in your ABAP.
I am not ure, if you can call a BEx report in your ABAP. But with what I mentioned here, you can acheive what you want.
Ravi Thothadri

How to call a BW Query from an ABAP program?

How to call a BW Query from an ABAP program?

hi
check this link
/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-i
/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-ii
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
hope this helps
cheers

BEX Query to ABAP Transaction Code

Hi,
RRI from BEX Query to ABAP Transaction Code When I Right clivk and select GOTO on my Delivery order
say 120012 It shd directly go into tht particular DO The transaction code is vl33n
but when i give ABAP Transaction as reciever object it only goes to the initial screen of query where we manually need to give the DO Number It does not show the DO 120012 directly
thx,
amar

Hi Amar
Try doing Assigning Infoobject to R/3 field in Assignment details RSBBS transaction:
Check below thread for explaination
Re: RRI - Selection was not Restrcited
Ravi

How to call a TopLink Query on ADF Page Load (onload)

Hi,
I am new to ADF wants to find out how to call a TopLink Query whenever a page loads. I saw SRDemo Sample but all the queries are bound to some kind of an action method i.e. clicking on a button executes a query etc. But I need to call a toplink query on my page load. Any small sample will help.
Thanks

Try this approach:
http://blogs.oracle.com/shay/2007/07/25

How to execute this SQL Query in ABAP Program.

Hi,
I have a string which is the SQL Query.
How to execute this sql Query (SQL_STR) in ABAP Program.
Code:-
DATA: SQL_STR type string.
SQL_STR = 'select * from spfli.'.
Thanks in Advance,
Vinay

Hi Vinay
Here is a sample to dynamically generate a subroutine-pool having your SQL and calling it.
REPORT dynamic_sql_example .
DATA: BEGIN OF gt_itab OCCURS 1 ,
line(80) TYPE c ,
END OF gt_itab .
DATA gt_restab TYPE .... .
DATA gv_name(30) TYPE c .
DATA gv_err(120) TYPE c .
START-OF-SELECTION .
gt_itab-line = 'REPORT generated_sql .' .
APPEND gt_itab .
gt_itab-line = 'FORM exec_sql CHANGING et_table . ' .
APPEND gt_itab .
gt_itab-line = SQL_STR .
APPEND gt_itab .
gt_itab-line = 'ENDFORM.' .
APPEND gt_itab .
GENERATE SUBROUTINE POOL gt_itab NAME gv_name MESSAGE gv_err .
PERFORM exec_sql IN PROGRAM (gv_name) CHANGING gt_restab
IF FOUND .
WRITE:/ gv_err .
LOOP AT gt_result .
WRITE:/ .... .
ENDLOOP .
*--Serdar

How to print sap bex query varaibles in webi report

Dear Friends,
I created a webi Report on universe ( Based on SAP BW Bex Query with variables).
its working fine. Now i want to show the selected variable values on the top of my webi report.
How can i access and print my bex query variables on header of my webi report.
We are using BOE 3.1 SP2, SAP BI 7.02.
Regards
Malik

Malik
That is default behavior of BO. The integration mapping from BI to BO will populates like that, COZ you made BI variable on top of Date dimension, which needs From and TO fields.
To display that info, what user has selected on the fly:
As suggested, use UserResponse() function.
keep in mind, prompt text and userresponse text must be identical. Otherwise, it wont't work.
Eg: prompt Text: Enetr From Date:
Var: =UserResponse(Enter From Date:) -->> Results: (Blank)
Why?? Prompt text Enetr not Enter
Hope it clears you.
I'm Back

How to call a sub screen from abap report

Hellow friends,
how to call sub screen 1001 prog name SAPLMGD1
and main program SAPLMGMM screen 4000 of tcode MM02.
i need to call the sub screen from abap report

Hi Rajesh,
You can use FM MATERIAL_MAINTAIN_DIALOGUE to go to subcreen MRP1 in MM02.
Please check this sample code from other thread and enter 'MRP 1' for p_dytxt.
REPORT zsritest.
TABLES mara.
DATA: lv_bilds LIKE t133a-bilds,
ls_t130m LIKE t130m,
ls_rmmg1 LIKE rmmg1,
lwa_view TYPE mbildtab,
lwa_auswg TYPE mgauswg,
lt_views TYPE STANDARD TABLE OF mbildtab INITIAL SIZE 0,
lt_auswg TYPE STANDARD TABLE OF mgauswg INITIAL SIZE 0.
PARAMETERS: p_matnr LIKE mara-matnr,
p_werks LIKE marc-werks,
p_dytxt LIKE mbildtab-dytxt.
SELECT SINGLE * FROM mara WHERE matnr EQ p_matnr.
CHECK sy-subrc EQ 0.
CALL FUNCTION 'T130M_SINGLE_READ'
EXPORTING
tcode = 'MM02'
kzrfb = 'X'
IMPORTING
wt130m = ls_t130m
EXCEPTIONS
not_found = 1
wrong_call = 2
OTHERS = 3.
CALL FUNCTION 'BILDSEQUENZ_IDENTIFY'
EXPORTING
branche = mara-mbrsh
materialart = mara-mtart
tcode_ref = ls_t130m-trref
* KZRFB = ' '
IMPORTING
bildsequenz = lv_bilds
* KZ_BILDS_CHANGED =
EXCEPTIONS
wrong_call = 1
not_found = 2
OTHERS = 3.
CALL FUNCTION 'SELECTION_VIEWS_FIND'
EXPORTING
bildsequenz = lv_bilds
pflegestatus = mara-pstat
TABLES
bildtab = lt_views[]
EXCEPTIONS
call_wrong = 1
empty_selection = 2
OTHERS = 3.
ls_rmmg1-matnr = mara-matnr.
ls_rmmg1-werks = p_werks.
READ TABLE lt_views INTO lwa_view WITH KEY dytxt = p_dytxt.
CHECK sy-subrc EQ 0.
lwa_auswg-auswg = lwa_view-auswg.
APPEND lwa_auswg TO lt_auswg.
CALL FUNCTION 'MATERIAL_MAINTAIN_DIALOGUE'
EXPORTING
irmmg1 = ls_rmmg1
* IRMMG1_REF = ' '
KZ_EIN_DARK = 'X'
t_tcode = 'MM02'
* FLG_MATNR_RES = ' '
p_pstat = mara-pstat
* FLG_STAT_ALL = ' '
* CALL_MODE2 = ' '
* IMPORTING
* MATERIAL_NO =
* UPDATE_OK =
TABLES
iauswg = lt_auswg[]
EXCEPTIONS
no_authority = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Ferry Lianto

How to Call the RFC in Webdynpro abap application

Dear Experts,
Good Evening to all...
I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
Thank You.

Hi Jaga,
You asked the same question again.
Without closing the [previous one|Re: Where SAP store the uploaded files?].
I think Abhi has answered your question.
If not please elaborate on the problem.
The solution btw is to create a Service Call.
Sumit

How to call webservices in BSP and ABAP

I am new to use webservices.Please help me to call a ABAP Webservice in ABAP program and How to call a other Webservice like Java Webservice in ABAP. Please give me steps to follow.
Thanks,
Suneetha.

May be this prog. will give u the required info.
Use a free web service in an ABAP program which validates * an email-id.
REPORT zvalidate_email.
PARAMETERS: p_mail(100) LOWER CASE.                 " E-Mail id to be verified
DATA: http_client TYPE REF TO if_http_client .
DATA: w_string TYPE string ,
      w_result TYPE string ,
      r_str    TYPE string .
DATA: result_tab TYPE TABLE OF string.
START-OF-SELECTION .
CLEAR w_string .
CONCATENATE
'http://www.webservicex.net/ValidateEmail.asmx/IsValidEmail?Email=' p_mail
INTO
w_string .
CALL METHOD cl_http_client=>create_by_url
    EXPORTING
      url                = w_string
    IMPORTING
      client             = http_client
    EXCEPTIONS
      argument_not_found = 1
      plugin_not_active = 2
      internal_error     = 3
      OTHERS             = 4.
CALL METHOD http_client->send
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
CALL METHOD http_client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2
      http_processing_failed     = 3.
CLEAR w_result .
w_result = http_client->response->get_cdata( ).
REFRESH result_tab .
SPLIT w_result AT cl_abap_char_utilities=>cr_lf INTO TABLE result_tab .
READ TABLE result_tab INTO r_str INDEX 2.
IF r_str+44(1) = 't'.
    WRITE:/ 'Valid email address'.
ELSE.
    WRITE:/ 'Invalid email address'.
ENDIF.

How to call structure in query change mode

Hi Gurus,
How to call created structure in query change mode?
Is there any other methods?
Thanks in advance
Ramu

HI Ramu,
If ur structure is global then it will be available in the left panel in the structure tree, Just drag and drop into the rowns or colums. Make sure that the structure is saved as global.
Thanks
Khaja

How to set a BEx Query Condition in Design Studio (e.g. Net value GT 0)

Hi experts,
I have set a simple condition in my BEx Query...
e.g. key figure "Net value" GT 0 to become only positive values in the query result.
In the Query runtime the condition works successful, but in the Design Sudio view the defined Query condition doesn´t work.
In my Design Studio crosstab I have tried to switch between the display setting "Conditional formating Visible" true/false, but without success.
By the way, before I have posted this thread, I had a look at this two blogs...
Design Studio 1.0: Create a Scorecard Using SAP BW BEx Query Exceptions
Design Studio 1.2 - a Second Look
Any ideas or experiences?
Thanks and regards,
Michael

Hi Michael,
I think you are mixing up two different BEx terms. Conditions are filters on key figures (show me only the results with a value bigger than 50). Exceptions do not filter the result set, but provide a formatting based on the values in the result set (if value is bigger than 50, make its cell red).
The Conditional formatting setting in Design Studio refers to the BEx exceptions. For the BEx conditions there isn't such a setting available. You just have to activate the condition in your BEx Query and use that for your data source in Design Studio.
If you want a workaround to enable/disable conditions from Design Studio, check this blog I wrote: HackingSAP.com - SAP Design Studio and Conditions It shows how you can use variables to adjust the conditions (and also activate) from within Design Studio.
Cheers,
Xavier

How to call a webService from WebDynPro ABAP ?

We are trying to call a webService from WebDynPro-ABAP application. It is not working, While if we are calling the WebService from a Report, it is working.
How exactly do we call a WebService from a WebDynPro-ABAP application?
What are the main steps involved ?

Hi Phani,
You will need to create a service call as follows.
Right click on your WD component name and select Create->Service Call
The wizard will guide you through a series of steps to make a Web Service Call. On the 3rd screen, it will give you options such as Function Module, Web Service, etc
Before making a service call, you will need to create a proxy for the Web service in the ABAP Workbench using a WSDL document as a basis. To create or consume Web services, you will need the authorizations associated with the role SAP_BC_WEBSERVICE_ADMIN.

Client Proxy : How to Call Outbound Generated Proxy in ABAP report ?

Dear SDNrs.
I have already created a Scenario for Client/ Outbound Proxy in XI .
I have already Generated Client/ Outbound Proxy in ECC .
Now Question is How to call this generated Proxy in report ?
Please Guide ..... I dont have any idea ...
1. before calling any proxy in report what information needs to collect from generated Proxy ?
2. How to call this generated Proxy in report ?
Regards
Prabhat Sharma.

Hi Prabhat
You have to use your knowledge about ABAP OO for this.
It's simple. You created your Proxy Object throught SPROXY transaction, right? Now, you have to instance your class (information avaliable in SPROXY-> Proxy Objetc -> Class Name) and to use the method displayed there.
Follow an example:
DATA: wa_backfeed      TYPE zibrsapglbackfeed_sapgl,
           wa_output            TYPE zibrsapglrequest,
           lo_clientproxy       TYPE REF TO zibrco_sapgl_out,
           lo_sys_exception TYPE REF TO cx_ai_system_fault.
TRY.
      CREATE OBJECT lo_clientproxy.
      CALL METHOD lo_clientproxy->sapgl_out
        EXPORTING
          output = wa_output.
    CATCH cx_ai_system_fault INTO lo_sys_exception.
               lo_sys_exception->if_message~get_text( ).
ENDTRY.

How to call a Bex query in ABAP

Similar Messages

Maybe you are looking for