How to caluculate standarard deviation in SAP xMII

Hi friends,
can please guide how to caluculate standarard deviation in SAP xMII
Thanks
srikanth

Srikanth
Thats right. there is an Action Block called Simple Statistics, whose function is much different from that of Aggregate Statistics in the usage of BLS.
Aggregate Statistics
This is used to return Statistical Calculation Values for a set of Values at one time. This is used with XPath Target (Value Source) hitting a Column in an XML Result. In turn, this gives the Statistical Calculation for the set of values in that column.
Simple Statistics
This is used to return Statistical Calculation Values for a dataset which dynamically gets updated with newly added value. So this Action Block is used inside a Repeater Action block, which in turn gets the value from an XML Source, sets that value with ValueSource Property in Simple Statistics. Hence, the calculated statistical value will be dynamically updated with newly added value while looping the XML Source.
Regards
Som

Similar Messages

Upgrade JAXP 1.2 to JAXP 1.3 in SAP xMII

Hi All,
I need a favour regarding JAXP (Java API for XML Processing).
I am currently using SAP xMII 11.5 it uses both DOM as well as SAX parser to parse the xml. Also it uses JAXP to talk with DOM and SAX.
Now the issue is it uses JAXP 1.2 which is not handling big xml. It makes a performance issue when the size of the xml is large.
So I need to upgrade the JAXP in xMII system.
Also I am using J2SE 1.4.2.
So I cant use JAXP 1.4 or more as it is not compatible with J2SE 1.4.2. JAXP1.4 uses J2SE 5.0 or more.
I cant upgrade Java version rather I can upgrade from JAXP 1.2 to JAXP 1.3 or some other but lower than JAXP 1.3 & it should be compatible with J2SE 1.4.2 & windows.
Now the need is to how to implement JAXP 1.3 in an existing system which is already using JAXP 1.2
Thanks,
Murugappan.

Mark:
Welcome to Apple Discussions.
You can try using Pacifist to extract Safari from your install disk and install it. You may then be able to upgrade it more easily, although I can't promise that for sure.
Unless you are absolutely wedded to Safari, I find Camino to be at least as good (I think better) as Safari, and looks almost identical, so that there should not be much of a learning curve. I also use Firefox and especially like it for the measure of security it provides.
Please do not hesitate to post back with further questions or comments.
Good luck.
cornelius

IChart Query in SAP xMII

Hi
We have an ichart object and the chart type is CUSTOM.
pen 1 is a bar type and pen 2 is a Line type.
Questions are:
1. How can we set the pen 1 be set as a horizontal bar? and still maintain pen 2 as a line?
2. On the bar shown, how do we display values. I.E. values are displayed on the BARS and not on the X-Axis or Y Axis.
3. How to make the X-Axis lable Vertical instead of horizontal text?
We are using SAP xMII version 11.5
Regards
Chethan Sreedharan

Chetan,
Unfortunately you can not display a horizontal bar in a custom chart. All it allows you is a bar or a stacked bar in addition to Line.
Rotating labels is part of the 12.1 release and I am not sure on the "display data on the bar" part , may be that is availbale with 12.1 as well.
There may be other Chart solutions available that might help you. One example being http://www.fusioncharts.com/ Have never used these myself so not sure on the technicalities of this solution.

Career Prospects in SAP xMII

Hi All,
I want few suggestions from you guys. I am basically a Java Professional. I have 2 years experience in Java, and now, I have been working in SAP xMII for only 1 n half months. I find xMII very interesting. Can anybody please tell me about the career prospects in xMII? I am thinking of proceeding in this line. Do you people find this as a sensible decision? If yes, then how should I proceed? Any kind of suggestion or information regarding this is most welcome.
Thanks in Advance,
Lipsa.

I agree with Ryan - I see lots of demand for xMII skills, and the product is pushed considerably by SAP - I see a reference to xMII in every second SAP PowerPoint presentation (ok, maybe that's a slight exaggeration...)
I also think that some knowledge/proficiency in the technologies surrounding xMII will be very useful. Some examples of this in the SAP space could include XI/PI, Enterprise Portal, ERP, CAF, Visual Composer, etc. Some understanding of MES concepts and products would also be useful.
In my opinion, a broad knowledge of the above would help since xMII is an integration product and thus has touch points to a variety of other (non-SAP) systems...
But I guess a lot depends on how xMII is implemented...

Error while using SAP-XMII 12.1.5 in WINDOWS 7

Hi All,
Iam using SAP-XMII 12.1.5 in Windows7 OS.
Some times I face NULLPOINTER Error in javascript.It was automatically cleared when i restart the system.
Due to this my MII screens are not working properly.Can any one tell how to clear this Error.

This error arises in Javascript if any of your variable is not assigned and if we try to access/compare that variable with something.
If you can share the portion of javascript or the line number which you can see in Window 7 on double clicking at the botton left hand side error icon when u run the application.Than I can tell you the exact solution for it.
Note : You just need to initial the javascript variable before using it.
Thanks and Regards,
Ajit

Java.lang.StackOverflowError in SAP xMII 11.5

Hi All,
I am using SAP xMII 11.5 and Java 1.4. I am trying to display a large iGrid using irpt file. But it is not displaying the grid. I checked log in servletExec folder,it have java.lang.StackOverflowError. How can i solve this issued? Can it be resolved by setting -Xms parameter in Java Run-time environment in server(I am using Windows 2003 Server)? Or should I need to set it in any conf file or pref file inside servletExec folder? Please advice. Thanks in advance.
Regards,
Subin

Hi Thomas,
MII display applets are nothing else than standard applets. They are executed in the client VM mostly provided by the JavaPlugin in the browser. To give the applets more RAM use the -Xmx parameter and set it in the command line for the JavaPlugin VM. In Windows this can be found in systemcontrol->Java. 64M ist standard. Give it 250M for testing.
Oh, sorry. Just saw that you found the exception in the server log. Same holds for the server. So try to increase RAM for server VM with -Xmx. Server VM can easily be set to 1GB (but not more than about 1.5G in a 32 bit system).
Do you have the stack trace for this StackOverflow? Normally this points to endless recursion.
Good luck,
Matthias
Edited by: Matthias Wald on Jan 21, 2011 11:11 PM
Edited by: Matthias Wald on Jan 24, 2011 3:46 PM

Scripting SAP XMII (Various Applets : Methods)

Hi All,
Am new to SAP XMII , i have just started to design Query / Display Template and create some Transactions.
Now after calling it into Display template for example : i Grid / Graph
How i need to get the methods in scripts
getBrowserObject.getSelectedItem();
How each Display has it's methods ??
am confused , is it XMII standards ??
Kindly give a place where i can find relevant methods for using those applets
rgds
srini

Srini,
Go thrtough the below link for the methods for webscripting:
http://help.sap.com/saphelp_xmii120/helpdata/en/44/423faf81ce2152e10000000a114a6b/content.htm
http://help.sap.com/saphelp_xmii120/helpdata/en/44/3e7cab08035dace10000000a11466f/content.htm
http://help.sap.com/saphelp_xmii120/helpdata/en/index.htm
These are MII methods needed while calling iGrids,iCharts,iBrowser and also use eventing methods in below link:
http://help.sap.com/saphelp_xmii120/helpdata/en/44/442fdcc33e4a8fe10000000a1553f6/content.htm
-Suresh

Sap xmii 12.2 issue

who has installed the new version sap xmii 12.2? after i installed it, i found i can't find the lable "Navigation Services ". how can i view the page i published by publish assistant tools?

Hi buddy
We still are fighting with MII 12.1 issues and raising tickets to SAP. So why so hurry to run for MII 12.2?
Regards
Som

How to delete the Sites in SAP IS RETAIL

hello ALL,
can any one explain me how to delete the Sites in Sap Retail.
thanks in advance

Hello All,
Delete the plant / Site complete details and put in one transport and do the import & export.
Thanks.
Edited by: krishna cherry on Jul 26, 2010 3:28 PM

How to print last page in sap script in ladscape format?

Hi all,
can any 1 tell me How to print last page in sap script in ladscape format?
Thanks In advance.
Pravin

Hi Pravin Sherkar,
we can do this in SAP Scripts.
we need to create two pages, one of landscape and another of potrait.
now after filling the data at last we need to call the page which is of format landscape using START_FORM function module.
You can use condition &PAGE& = &FORMPAGES&.
Please check this link
Printing Portrait/Landscape in sapscript
Re: Landscape and potrait in same layout?
http://www.sap-img.com/ts013.htm
Best regards,
raam

How to print Special Characters in Sap-Scripts

How to print Special Characters in Sap-Scripts
Thanks,
Ravi

Hi
if u want print special characters we can use hot codes i.e ' ' (single inverted commas). in between these hot codes insert u r special characters.
write ' !@#$%^&*( ) '.
for the above write statement output is
output is !@#$%^&*( )

Com.sap.xmii.Illuminator.logging.LHException: java.lang.NoClassDefFoundErro

Hello,
Intermittently users get the following error when logging into the application which is built upon xmii:
com.microsoft.sqlserver.jdbc.SQLServerResource
At this point in the application it is trying to read information which is stored in a SQLServer database.
We see the following errors in trace files:
application [XMII] Processing HTTP request to servlet [Illuminator] finished with error.
The error is: com.sap.xmii.Illuminator.logging.LHException: com.sap.xmii.Illuminator.logging.LHException: java.lang.NoClassDefFoundError: com.microsoft.sqlserver.jdbc.SQLServerResource
Exception id: [00145E4D6... [see details]
This is running on a NW JavaAs 7.0 SP18, MII 12.0 SP8.
We've replaced the JDBC driver with one which SAP support told us would work, but that did not fix the problem either.
We can get the problem to go away for a period of time by simply disabling and then re-enabling the Data Server connection. It is using the IDBC Connector with a SQL connector type. STATUS shows No. Connections Used 0, No. Connections Available 1, Max No. Connections Used 2. Max. Wait Time 0.0.
Ideas?

Hi John,
Before connecting SQL server with SAP MII, try connecting SQL server independently.
It helps to narrow down the problem.
If the independent connection works fine, try connecting with SAP MII with proper JDBC drivers
Go through the SAP Note 1109274 & forum MII 12.1 - connection to MS SQL2005 database
for more information on JDBC drivers.
Thanks
Rajesh Sivaprakasam.

How to use IF Conditon in SAP Scripts?

Hi Guys,
               I am having adoubt how to use IF conditon with multiple variables in SAp Scripts
for ex If a>b and a>c and a>d
         Elseif b>a and b>c and b> d.
         Elseif .....
          endif.
          How to use above example in SAP Scripts.
thanks,
Gopi.

hi Gopi,
it is almost the same as normal ABAP, you only have to use & before and after the variable and the variable has to be in capitals and you have to make the line as command ( /: before the line )
IF &A& > &B& AND ...
text to print
ELSEIF ...
text to print
ENDIF.
hope this helps
ec

How to store multiple files from SAp in to Application server?

Hi Guys,
 Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
 Any Logic or Code for how to do is welcomed.
 plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
 DIRNAME(200) TYPE c, " name of directory.
 sp_name(100) TYPE c," name of entry. (may end with *)
 END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
 dirname(75) TYPE c, " name of directory.
 aliass(75) TYPE c, " alias for directory.
 svrname(75) TYPE c, " svr where directory is availabl
 sp_name(75) TYPE c, " name of entry. (may end with *)
 sp_cs(10) TYPE c, " ContainsString pattern for name
 END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = in_file
 "FILETYPE = 'BIN'
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = ' '
 HEADER_LENGTH = 0
 READ_BY_LINE = 'X'
 DAT_MODE = ' '
TABLES
 DATA_TAB = itab
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
 TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
 move g_tmp_file_path to in_file.
 h_destin = ''.
 SPLIT g_tmp_file_path at '\' into table itab.
 loop at itab into g_tmp_file_path.
 h_destin = g_tmp_file_path.
 endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
 EXPORTING
 tabname = '/BI0/PCO_AREA'
 lfieldname = 'CO_AREA'
 IMPORTING
 dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'SP_NAME'
 DYNPPROG = SY-REPID
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'destin'
 VALUE_ORG = 'S'
 TABLES
 VALUE_TAB = searchpoints
 FIELD_TAB = lt_dfies
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
 WHEN 'ORA'.
 CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
 MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'ADA'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
 MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'INF'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
 MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
 APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
 WHEN 'DB6'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
 IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
 MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 ELSE.
 EXIT.
 ENDIF.
 WHEN OTHERS.
 EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = sy-uname.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = 'all'.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
 PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
 DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
 CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
 ID 'VALUE' FIELD programfiles_path.
 IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
 CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
 ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
 CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
 ENDIF.
 CONCATENATE programfiles_path '\SAP\hostctrl'
 INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
 searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
 ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
 IF sy-opsys = 'Windows NT'.
 searchpoints-dirname = '.\'.
 ELSE.
 searchpoints-dirname = './'.
 ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
 ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
 h_ind = sy-tabix.
 IF searchpoints-sp_name IS INITIAL.
 DELETE searchpoints INDEX h_ind.
 ENDIF.
ENDLOOP.
ENDFORM.

How to delete a user in SAP-CPS Version 7.0

Hello,
I created my users via UME ( User Management Engine of Java Application server). Unfortunately I used the wrong name convention, so I had to recreate all the users in UME. Afterwards I delete all wrong users in UME.
Than I tried to login with my new user in SAP-CPS (users are normally created in SAP-CPS during first login) but I get the error message that I reached the maximum number of 10 users allowed in the basic version. No problem I thougt, I simply delete the wrong ones in SAP-CPS. But I do not know how to delete a user! I could not find any menu item or any describtion in the manualls how to delete an user in SAP-CPS.
I remove the users from any Isolation group, I disabled all the users but still I could not find any way to delete them.
Has any body a hint for mor.
Kind regards
Frank Morleo

Hello Anton,
deactivating the unused users made it possible to login with the new ones.
Thanks for your help.
Now I have to find out how to clear the deactivated users from the list.
Regards
Frank

How to caluculate standarard deviation in SAP xMII

Similar Messages

Maybe you are looking for