How to chang message "W" to "E"

Dear all,
During creating Delivery for sales order, I am facing the following waring message.
Delivery quantity must be entered for the item
Message no. VL361
Diagnosis
The delivery quantity must be greater than zero, as defined in Customizing for the item category of this delivery item.
Procedure
Enter a quantity greater than zero in delivery processing.
Should this error message appear when you are confirming a WMS transfer order that you want to close with a quantity of zero, it could be that the delivery item does not allow a quantity of zero. If necessary, ask the person responsible for Customizing if this is intentional. If so, you cannot confirm the transfer order with a quantity of zero.
I hope the message is eror.
How to chang message "W" to "E"?
colin

Hi
SAP has given some messages which can be converted from waring to error and vice versa thro customization
All that SD related messages which is offered by standard SAP you can find in OVAH and OVM1
your message VL361 will not be there in OVM1 which means that standard SAP has hardcoded this message type thro its program and not available for customization
Go to SE91 and do the following:-
input VL in Message Class
input 361 in Number and execute.
select the message number and click on "Where-Used List" (press Cntrl + Shift + F3)
Deselect all boxes excepting "Programs"
List of programs will be displayed where this error message is used
Double click on the description in right side of the screen
You can see the codings written for the error message as W361 which may be changed to E361.
This is a modification of the codings of the standard program which standard SAP does not recommand and if still you want to go with it it needs to be done thro ABAPer which will ask for developer access key etc
Regards
Raja

Similar Messages

How to change message v1 501 to be an error message ?

Hi guys,
When i use VA01 creating a sales order reference to contact, if sales order's quantity is larger than contact's quantity, the system gives an warning message :
Target qty of reference: 100 PC (total referenced: 101 PC)
Message no. V1501
I can't find V1 501 with tcode OVAH , anyone knows how to change Warning to Error for this message?
Thanks.

Dear wayne,
Please refer to my post (3rd post):
[Message Control - Warning/ Error|Well done Amit;
Your Message V1 501, can't be customized to Error from Warning, in customizing. Instead, chnages needs be done in Standard Code, to achieve the same.
Best Reagrds,
Amit.
Note: I think, following thread have the same relevance;
[Message control|Re: error/warning message]

How to change messaging storage on N97

The N97's messaging app has a setting (under 'Other') to change the messaging storage (default Chone Memory).
I set that to 'E: Mass STorage' but then messaging ended up showing only 'memory full. cancel some other programs' messages (but E: of course has > 17GB free!
When i switched back to C: all started working again and messages there are visible again.
So how do I change the storage messaging uses to E: ?
I also want to copy (better: move) all the messageing folders from C: to E: to free up more phone memory.
Any help is appreciated

I'm not sure if this will help or not - but as far as I could find there was no way to move the actual messages from C to E, other than perhaps backup from C then restore to E - which I didn't need to try to do.
In my case I set my Messages to E right from the start, but when I later connected my phone to PC Suite in Media Transfer mode, it reset my Messages location to C. I thought I'd lost all my messsages, They reappeared when I realised the setting had changed, and I changed it back to E. The system hadn't copied my messages from E to C, just created another message store on C (which I later deleted).
So I don't believe setting your Message store location to E will also copy your existing messages from C to E.
To free your C space, I would backup your messages, then delete your C drive mailbox (there is a thread on the popular threads link on the front page), then restore your messages to E.
Again, I have not actually done the backup and restore, but I am of the opinion it would be the only way to move the messages.
Perhaps someone else may have a better idea - this is just one I am throwing out there as a possibility.

How to change message text encoding in multiple e-mail messages?

Hello!
I'm newcomer in AppleScript. I have imported a lot of email messages from mbox.
The problem is that some of messages are displayed in correct russian encoding (KOI8-R) but
other messages displayed with incorrect encoding. So i need manually set their encoding
via mail menu to Cyrillic (Windows) to be able to read them. I got about 1000 of those messages.
Is there any possibility to mark those messages in mail and then run AppleScript to change
their encoding automatically?
something like that (that script is not working one):
tell application "Mail"
set selectedMessages to selection
if (count of selectedMessages) is equal to 0 then
display alert "No Messages Selected" message "Select the message you want to get the raw source of before running this script."
else
set message text encoding to "Cyrillic (Windows)"
end if
end tell
Thanks!

I was able to get it to work on all selected emails using this script:
(Note I changed the encoding to "Simplified Chinese (EUC)")
using terms from application "Mail"
tell application "Mail"
set theMessages to selection
tell message viewer 1
repeat with themessage in theMessages
set selected messages to {themessage}
activate application "Mail"
tell application "System Events" to ¬
tell menu item "Simplified Chinese (EUC)" of menu 1 of ¬
menu item "Text Encoding" of menu 1 of ¬
menu bar item "Message" of menu bar 1 of ¬
application process "Mail" to if (exists) then click
end repeat
end tell
end tell
end using terms from

How to change message V1801 to error message?

Dear expert
In sales order creation, Message no. V1801 u201CPricing error: Mandatory condition is missingu201D will display if material condition does not exist.
But the incomplete sales order still can be saved, how can we set V1801 to error message and sales document canu2019t be saved
Thanks

Set the incompletion log for pricing in OVA2 as follows:-
Table:::Fld name:::::Description::::Scr.:Status
VBAP:::::PRSOK::::::::Pricing:::::::PKON:::06
By doing so, sale order cannot be saved. Also dont forget to assign this incompletion log to your item category in VOV7
thanks
G. Lakshmipathi
Edited by: Lakshmipathi on Apr 28, 2011 1:49 PM

How to change message class selected for validation ?

Dear all,
For testing, I have created a new validation (applic. area : FI, Callup point:2) with a existing message class (/EACA/BTA_GL).
But now, I would like to create a new validation for the same application area and callup point, but with another message class (that I have created with Z_...).
But unfortunately, I cannot choose another message class when I create a new validation.
Could you help me ?
Thank you and best regards

To change the message class of a callup point please use program
RGUGBR28 (description in SAP note 6975). After making the change,
generate the coding with program RGUGBR00 for the application (without
marking the last two checkboxes).
kind regards,
Diogo Peretti.

How to change messaging server attachment quotas

Hi All
We have messaging server version 7.3.currently we are able to send 1MB,But we want to change it to 10MB,where need the chage,please help.
-bash-3.00# ./imsimta version
Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (not compiled)
SunOS mirror 5.10 Generic_141444-09 sun4v sparc SUNW,Sun-Blade-T6320
Regards
Kamal

kkdas wrote:
Iam getting this error messages convergence version 1.3 from client machine Iexploere 7,8 Firefox 5.0
Firstly, there is no such version of Convergence. There is Convergence 1 Update 3 (a.k.a. Convergence patch 10). Convergence 1.3 doesn't exist.
You can get the exact version of Convergence by running "./iwcadmin -V" e.g.
-bash-3.00# ./iwcadmin -V
Sun Convergence 1.0-11.01 (built November 2 2009 - 20:48:35) Also there is no such version of Firefox. There is Firefox 3.5, Firefox 3.0 -- there is no Firefox 5.0.
Error
you have not authorized to perform this operation.There is no such error message. The following error message does exist however:
"Error: You are not authorized to perform this operation"
If you expect people to help you in the forums the least you can do is spend the time to provide correct information so we don't waste time searching for non-existent error messages.
Attachment size 3.3MB is ok if i try 4MB getting below this errorIf the attachment size is larger the Messaging Server allows you should get a popup with the message:
"Error: File too large"
What you can try is to increase the Messaging Server service.http.maxmessagesize and service.http.maxpostsize settings e.g.
./configutil -o service.http.maxmessagesize -v "12058624"
./configutil -o service.http.maxpostsize -v "12058624"
./stop-msg http
./start-msg httpRegards,
Shane.

How to Change Messages inline attribute value Dinamically

Hi
I'm using Jdev 11.3
Our requirement is if the facesmesage having onlly one message it should come like inline message
else it should come as a popup.
i tried EL for inline attribute but the problem is the method is calling only when submition
public boolean isInline()
boolean flag = true;
Iterator it = FacesContext.getCurrentInstance().getMessages();
if (it.hasNext())
flag = false;
return flag;
regards Abhilash

duplicate

HOW TO CHANGE PROGRAMATICALLY LABELS OF BUTTONS AND ...

I want to do a HTMLDB application is some languages that user choice in web page.
I have resolve good how to change messages in pages, but I need to know how to change , labels in buttons, reports and in items.
¿How I can do this? Change this by program.
Any help wellcome.
Thanks in advanced.
Regards everybody.

Hi,
Normally, to translate your entire application you would export the application using Shared Components=>Translation Services. There is documentation on how to do this:
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14303/global.htm
You can also use Shared Components=>Manage Messages to translate individual items. If this is what you want, please let me know and I'll let you know what I did to achieve this.
Normally, the user would select their preferred language using a browser setting. Do you intend for them to select a language on a page?
Regards
Andy

Af:table - navigation - change message

Hi,
How to change message in af:table navigation link (I mean "previous 10", "next 10")?
In some languages the massages are rather long
thanks,
Branislav

Hi,
if the browser shows busy then for sure its not caused by the code snippet you provide. In your code you may want to try and call response complete on the FacesContext to indicate a complete response
Frank

Changing message type is standard program

Hi all
In transaction cs02 I m getting a warning message "Enter Change number-BOM has History requirement".
Instead of warning I want it as a Error message. Can anybody tell me how to do that

my dear no matter that in which forum it is belongs to.
I mean to say my problem, just want to know how to
change message type....

Email messages now show "To: me" instead of the name or email address and I want to know how to change back to the way it was.

I use several yahoo email addresses and it has always been very convienent to see if it is a personal or business related message by simply seeing the To: line. Now all of sudden all I see is "me" and it is not at all helpful. I didn't make the change nor authorize it to be done. I am not even sure if this is a Firefox issue or a Yahoo issue. I would like to know how to change back to show the full email name or address.

hello shackiraq, you'd have to contact yahoo's support about this issue - firefox doesn't handle your emails but just renders a website like it is provided to you by the server of a webmail service.
https://help.yahoo.com/kb/mail-for-desktop

How to change reject call SMS message text

Hello everyone
Some time ago I bought a Nokia N9 and one feature I use frequently is reject calls sending a message.
In other Nokia phones (symbian) you can change the message text in options section, but in this phone I can find how to change it.
Do anyone know how to change this message?
Thanks in advance

Hi Amit,
This can be done easily, if it showing the data of a view object then you can change the value of view attribute.
Suppose a column in VO I say rank fetches value as 1,2,3 then in vo query to append L1,L2....
Suppose I have quary like select rank from xx_table then I can change it to select 'L'||rank from xx_table.
I hope this will resolve your problem.
Regards,
Reetesh Sharma

I just upgraded to mountain lion and I can't figure out how to use messages... it wants me to use AIM or something like it, but I can't change the user...

I just upgraded to mountain lion and I can't figure out how to use messages... it wants me to use AIM or something like it, but I can't change the user... How do I do this??

See this Thread

How to change the message in CUCM 7.0 " Your Current Options"

Dear All
can any body help me or assist me to type my own message at the botom of the phones by default its your current options but i tried to much to change it or find any way to change and i failed.
in Call Manager express it was easy to change just at the cli you type "system message Hello this is your IP Phone" but at the CUCM 7.0 i dont know how to change this and solve this problem so can any body tell me how to change this message please its needed 100% for me
i have atached the picture that where the message cames so you people can see it.
with regards
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Waisudin Farzam ویس الدین فرزام
Project National IT Specialist            متخصص ملی تکنالوژی معلوماتی
Sustainable Development of Natural Resources Project
IDA Grant No: H238-AF
Program Management Unit (PMU)
Afghanistan Geological Survey (AGS) Annex Building, Ministry of Mines,
Kabul, Afghanistan
AWCC Cell Phone:                              0093 - 700 - 29 60 62
MTN Cell Phone:                                   0093 - 777 - 29 60 62
E-Mail Address:                                     [email protected]
E-Mail Address:                                     [email protected]
E-Mail Address:                                     [email protected]
Skype ID:                                               wais.farzam
MSN ID:                                                  [email protected]

You cannot change it, in CCM it was possible due to it being Windows and you had access to all the files.
CUCM does not grant access to the necessary files for this unless you have root access and it's not granted for purposes other than troubleshooting or to apply a workaround from a bug.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

How to chang message "W" to "E"

Similar Messages

Maybe you are looking for