How to change a CachedRowSet property?

Can any body tell how to set the value of"COMMIT_ON_ACCEPT_CHANGES" in CachedRowSet to false?
By default it is true.
I am using the Sun'd reference RowSet implementation

I want to know too.

Similar Messages

  • How to change ExchangeRate Type Property in EPMA

    Hi all,
    I would like to change the ExchangeRate Type Property (from NONE to AVERAGE) in EPMA Accounts Dimension (local dimension) for a lev0 member, but the Property is read-only (and it is flagged as "DERIVED"). How can I change the Property or another question where the fuck is the Source for the inherited value????
    Thanks in advance
    André
    P.S.: If I create a new lev0 Member the property is read-only, too.
    Edited by: Andre on 11.03.2013 14:55

    Ok, I could find it - if you change DataType to currency (was unspecified) than you can change the ExchangeRate Type.
    Nevetheless many thanks to all :-)

  • How to change a item property just for one record

    Hi,
    My Requirement is, when a new record is inserted i want item1 to be enabled(which is disabled by default) only for this new record. when I implement the following code, entire column is enabled intead of just for one record.
    The code I have written in WHEN-NEW-RECORD-INSTANCE trigger is
    app_item_property.set_property('block1.item1', ALTERABLE_PLUS, PROPERTY_ON);
    app_item_property.set_property('block1.item1', ENTERABLE, PROPERTY_ON);
    please help!
    Thanks
    Sunny

    The code I have written in WHEN-NEW-RECORD-INSTANCE trigger is
    app_item_property.set_property('block1.item1', ALTERABLE_PLUS, PROPERTY_ON);
    app_item_property.set_property('block1.item1', ENTERABLE, PROPERTY_ON);What is APP_ITEM_PROPERTY? This is not a Valid Oracle Forms Built-in. I don't see how your When-New-Record-Instance (WNRI) trigger will compile.
    To change the properties of a specific instance of an item you would use the Set_Item_Instance_Property built-in and then there are only a few properties you can change; which are: BORDER_BEVEL, INSERT_ALLOWED, NAVIGABLE, REQUIRED, UPDATE_ALLOWED and VISUAL_ATTRIBUTE. To make a specific instance of "ITEM1" Insertable and Updateable you would use the following:
    Set_Item_Instance_Property('YOUR_BLOCK.ITEM1', CURRENT_RECORD, INSERT_ALLOWED, PROPERTY_TRUE);
    Set_Item_Instance_Property('YOUR_BLOCK.ITEM1', CURRENT_RECORD, UPDATE_ALLOWED, PROPERTY_TRUE);However, if you have set the ENABLED property of ITEM1 to NO in the Forms Builder, you will not be able to "Enable" the item using Set_Item_Instance_Property. You will need to make the item Enabled and set the INSERT/UPDATE properties to NO.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • How to Change the Visible property of Adobe Form Dynamically - URGENT

    Hi,
        I am woking on a scenario where when I click a button in Adobe Form,
    another Adobe Form should be displayed. This is using Web Dynpro Java.
    For this I have made the second form invisible and I want to make this VISIBLE when the button is Clicked. I am unable to get a method where this property of interactive form can be changed.
    Also, If there is any other way this can be done please let me know.
    I am using NWDS 7.0.09 with Adobe Live cycle designer 7.1.
    Thanks in Advance,
    Vasu

    You need to get the handler to the adobe form in your webdynpro program. If you are using webdynpro for java the following code snipped could be useful...
    IWDPDFDocumentInteractiveFormHandler iFormHandler = WDPDFDocumentFactory.getDocumentHandler(wdThis.wdGetAPI(),"YourAdobeForm");
         // Get appearance setter. 
         IWDPDFDocumentAppearance appearance =
              iFormHandler.getDocumentContext().getAppearance();
         //appearance.
         // Set page layout option
         appearance.setPageLayout(pageLayoutOption);
         // Set show option.
         appearance.setShowOption(showOption);    
         // Hide menu bar.
         appearance.hideMenuBar(true); 
         // Hide tool bars.
         appearance.hideToolBars(true);
         // Hide window controls.
         appearance.hideWindowControl(true); 
         // Show full screen.   
         appearance.showFullScreen(true);
    Reward points if the post is helpful
    Thanks!
    Surya.

  • How to change Connection String property in DataLink tab with Database options at Runtime?

    Hello
    please help me with your suggestions on the subject.
    I need to set "connection String" property at runtime as a result of some operation so as to log data in one of the 2 different database available.
    Regards
    Nitin Goel

    Hello Goel,
    are you thinking about something like this:
    Message Edited by frankne on 07-15-2009 01:40 AM

  • BPS Web Application - How to change function button property dynamically

    We have created BPS web application for sales force, it contains 2 button.
    1. To send Workflow notification to Managers 'Request for Approval' - This would be used by sales person
    2. Button for Manager to approve the Plan 'Manager Approval' - This would be used by the Manager
    We are using Territory Management in CRM to determine who is the manager and sales person.
    We would like to use the same Web application to be used by both sales person as well as the manager. However depending on the user ID, we need to access the Territory Management table in BW to determine whether the person logging in is Manager / Sales person. If it is a Sales Person, we need to display 'Request for Approval' button and hide 'Manager Approval'  button. Similarly, if it is Manager,   'Manager Approval'  button to be displayed and 'Request for Approval' button to be hidden.
    Would appreciate, if any one has faced similar requirement and how to do this.
    Thanks,
    VJ Sudharsan

    Thanks Ananad and Srini for the suggestion. Actually I was working on the direction Anand Suggestion and make it working but I am not sure what I did is correct or not.
    I have a bogus variable that checks for Manager / Sales person and brings back following code in the variable, if it is manager:
    '<style> #Req_Approval_s </style>'
    and I added a new text component of type HTML and code
    <%=descr(VarvlSel2/value)%>
    it works. Is this the correct way of doing the enhancement. Or is there a different place where we can add JavaScript.
    Srini - I am using exit function, can you explain how we can I use BPS authorization to achieve this.

  • How to change the "name of column" property of an text item in runtime?

    How to change the "name of column" property of an text item in runtime?
    I look the properties of items in help and found nothing about this!
    It's possible?

    Hi,
    an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
    First create block and add items
    The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
    Set into items the column name property to col1 , col2 ...
    At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
    in this way you can change the source of column value.
    Caution because if you change value type from varchar2 to date you must cast date into varchar2.
    May be that this way is valid only for view data not for insert-update, i don't remember.
    bye
    Message was edited by:
    Killernero

  • How to change autocommit property in Oracle 8.1.6 server

    Can anybody tell me how to change autocommit property in Oracle 8.1.6 server?
    Thanks in advance.
    Matthew
    null

    Hi,
    SET AUTOCOMMIT OFF
    thanks,
    Boby Jose Thekkanath,
    Consultant,CWO,
    NSW-AUS.

  • How to change Owner property in KM

    Hi masters.
    I want to know how to change cm_owner property of a document that i am uploading with dynpro java. I have written a code to add new properties for document but i couldn't change the Owner of document. Here is my code for adding a new property :
    if (wdContext.currentUserElement().getId() != null) {
    IPropertyName propOwner =
    new PropertyName(
    PropertyName.createDisplayname().getNamespace(),
    "Owner");
    prop =
    new MutableProperty(
    propOwner,
    wdContext.currentUserElement().getId());
    propMap.put(prop);
    This code is adding a new Owner property for document. So that after upload, i see 2 Owner fields in Misc. tab.
    Thanks for replies.

    Hello,
    Do check this blog out:
    [Dynamic properties setting in KM|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/645d4357-0701-0010-07bd-a2ea8c4d0aaf]
    Also read : [Storing and retrieving properties in KM|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ab288d09-0801-0010-b183-b8254ed4793f]
    [Developing a property filter in KM|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ee3a57-0701-0010-3e9a-ddae7e4e0521]
    Regards,
    Shailesh
    Edited by: Shailesh Kumar Nagar on Feb 19, 2010 8:16 AM

  • How and Where to change ESS payslip property as READ only Mode

    Hi,
      We are SAP ECC5.0 and using EP6 for ESS payslip. We have a problem
    launching ESS payslip for those employees who have Acrobat Editor and
    Reader installed. One can actually change the payslip information via
    Acrobat Editor when click onto PRINT button.
    However, for those without Acrobat Editor installed in the PC, we do
    not have such problem. Please advise how to resolve this.
    Was told to change ESS payslip property as READ only Mode. Unable to find this in the configuration setting.
    Thanks.

    You may further look at the following help link:
    http://help.sap.com/saphelp_nw04/helpdata/en/97/ccfc3f0ac2c642e10000000a1550b0/frameset.htm
    If it helps, pl do reward.
    Thanks
    Narasimha

  • How to Embed some specialy Font and Change Text Font Property in SDK?

    hello everyone,
        when i write my plugin,i met with some problem about the Font.
        first,i add some text in the PDF Page using the JavaScript,and want to use some special,and all failed and use some font instead which acrobat own.does the acrobat can embed some font that installed in the system? and how to use it in the sdk?
       second,i can use the touchup tools to change the text property,such as the font,size and scaling,how can i do it in my plugin in the sdk suppose i can get the text object?
       thanks.

    WHICH APIs are you using to add text to a PDF via JavaScript?  There are a few different ones and they each have various options with respect to fonts.
    As to the general answer, if the font allows embedding, then we will embed it - if it does not, then we won't. That simple.
    There are no APIs for JavaScript to change such attributes, only to plugins.

  • How do I change the name property of a file in a document library?

    I am trying to come up with an Event Receiver that will change the name property of an file when it is uploaded. For instance when a file is uploaded into a document Library, currently the Title is being generated (which is fine)...I want to be able to
    change the "Name" property from whatever it is, to match exactly what is in the "Title" property. Are there any sample codes/blogs out there that I can take a look at? Has anyone  had any experience doing this? It seems like something
    that should be straight forward, to change the "Name" property to match what is in the "Tilte" property.

    Hi,     
    You can try the code below which use the SPFile.MoveTo() function to change the name of the file.
    EventFiringEnabled = false;
    SPFile f = properties.ListItem.File;
    string spfileExt = new FileInfo(f.Name).Extension;
    f.MoveTo(properties.ListItem.ParentList.RootFolder.Url +
    "/" + properties.ListItem["Title"]+ "_new" + spfileExt);
    f.Update();
    EventFiringEnabled = true;
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/5cafb8e4-bb85-4147-9bda-4ab42a4d4817/sharepoint-2013-event-receiver-to-rename-files-not-working?forum=sharepointdevelopment
    A link about rename uploaded file using Event Receiver for your reference:
    http://paulgalvinsoldblog.wordpress.com/2008/01/25/quick-easy-rename-uploaded-file-using-sharepoint-object-model-via-an-event-receiver/
    Best regards
    Patrick Liang
    TechNet Community Support

  • How to change the size of the web item text in WAD 7.0

    Dear All
    I am quite new to WAD and I am having a problem with changing the font size of a web text item
    I have searched already and someone suggested changing the Design property to  HEADER1 or HEADER2 etc and then I should be able to change the font / size.
    I have done this but to no avail
    I want to have large heading across the top of the web template
    am I using the wrong web item ?
    I know I can key the text directly into the web template and change the font from the menu bar  but I need it in an item as I want to export them through to PDF later
    Would be grateful of any help
    thanks
    Sandra

    Thank you all for your quick responses (I will award points once this is sorted)
    On the information you have supplied this has opened up yet another new part of WAD that I have not experienced ...TAGs
    Shubhranshu - I have done what you said but as I have never used tags I have just had a look around and found that I can insert Any Tag but not sure if I should be doing that.  If it is inert any tag , I chose FONT from the drop down and cbmAttributes defaulted into the custom tab for the class name but not sure what it wants in the Attributes and CSS Style tab, it won't accept what I am putting which is leading me to believe that I shouldn't be doing it that way.
    Venkat - thanks for the links they will prove very useful.  I've had a look and although they talk alot about the XHTML code for tags they don't actually say how you do it in the editor - I would like to produce one that way first and then see the code it generates for it.  I'm a bit apprehensive with changing the code direct as I don't want to mess anything up.
    Thanks again for your help

  • Windows File CS Content Crawler - How to change crawl method?

    Hi,
    I have encountered an odd issue. I am using a Windows File CS Content Crawler to pull in some PDF files from a remote folder.
    However I noticed the Windows File CS Content Crawler is crawling in the document title rather than the actual PDF filename.
    I have checked the admin screens and I cannot find any way to tell my Windows File CS Content Crawler portlet to grab filenames and use these as the file display name when crawled in.
    The business clients do not use the document title and meta features and will not use them in the future so the way the current Windows File CS Content Crawler portlet crawls documents into the portal will not work as most will not have a document title or will have some default internal name.
    For example the PDF documents I am crawling in have Document Title's that have no relevance to the document filename.
    We are only interested in the filename and not the document title (however we may use the field in the future for meta information). Apart from doing some development work to make a custom crawler is there any other way to change the behaviour of the Windows File CS Content Crawler.
    I had to go into each document property in portal and modify the name field to the correct filename as it was using the value found in the Document Title field (incorrect).
    This seems wrong to me, I can understand using the meta data information contained in files to do the crawling and make searching better however how do you do this with a PDF file that you cannot search against inside portal anyway?!

    You can acomplish by changing the Global Document Property Map.
    I don't have the specific screen in front of me so this is from memory.
    Change the Name property to File name
    Change the Title property to File name
    You might have to experiment a bit with some test documents.

  • How to change the OraSSO login link in webcache/load balance

    Hi
    we have 10gAsR1 installed as a Portal instance. We have 6-server
    load balancer => webcache as loadbalancer (listening port 80)
    Wb ch1 and wb ch2 => webcache (listening port 7777)
    portal1 and portal2 => Portal listening 7778
    infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
    This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
    Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
    Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
    Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
    Any one know how to chang the URL at load balancer.
    I am struck at this point please suggest how should i proceed..
    Thanks,

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

Maybe you are looking for