How to change a 'debug' dll to a 'release' dll (without running a new build)?

I recently heard some best practice advice that you shouldn't rebuild your application for each environment, rather you should deploy a single package to your first environment, evaluate it, and if it passes, promote that same package to the next environment.
The first package would have debug configurations built in, including web.config, *pdb files, and dll internal references. I understand how to modify the web.config and remove the *pdb files, but how do you modify a dll to change it from a 'debug'
configuration to a 'release' configuration?
thx
Curt Zarger [email protected]

Hi Curt
In true continuous delivery any build might end up going live so you need to build as release from the beginning.
Cheers - Graham
Blog:
http://pleasereleaseme.net LinkedIn:

Similar Messages

How to change the year in a range of column dates to the new year?

How to change the year in a range of column dates to the new year?

Depends on the pattern of the dates. The last procedure will work for any pattern, or no pattern at all.
For examples.the dates are assumed to be in column A, starting at A2
Sequential dates?
Enter first updated date in the first cell.
Enter =A2+1 in cell A3. Copy the cell.
Select A3 to the end of the list. Paste.
With the cells still selected, Copy, then go Edit > Paste Values.
Evenly spaced dates?
Same procedure as above, but replace +1 in the formula with + and the number of days between dates in the list.
Randomly spaced dates?
Select cell B2. Press option-left arrow to insert a (temporary) column to the left of column B.
Click on the empty cell B2 in the new column. Enter the formula below:
=DATE(YEAR(A)+1,MONTH(A),DAY(A))
Copy the cell, then select B2 - Bn where n is the last ow containing a date to be converted. Paste,
With the cells still selected, Copy.
Click on A2, then go Edit > Paste values.
Click on the column B reference tab to select all of column B.
Hover the mouse over the right end of the reference tab, and click the black triangle when it appears.
Choose Delete Column from the menu that appears.
Regards,
Barry

Podcast how to change speed from 1.5x to 1x speed without having to go through 2x, 3x etc?

Podcast how to change speed from 1.5x to 1x speed without having to go through 2x, 3x etc?

Whereas I need to be
able to go from disc 1/track 1 to disc 1/track 2,
instead the iPod goes from disc 1/track 1 to disc
2/track 1.
Right click on any of these files and do a Get Info. Notice that there is, in fact, a Disc number field. So you can make disc numbers 1/10, 2/10 and so on.
iTunes and the iPod are both smart enough to recognize that there are disc numbers there and act correctly. So it'll start with Disc 1, play all that disc, then go to Disc 2, and so forth. It's just a matter of having correct disc number tags.
You can tag disc numbers for a whole disc at once. Simply select all the songs in a single disc (hold SHIFT or CTRL while selecting the songs), right click, Get Info, and you get the mass tag editor screen. Add the disc number info for this disc, and it'll tag that info to all those songs. Repeat for each disc.

How to changed old apple ID in AppStore? I've already creat new one's but when I go to the AppStore the old apple ID always appear. Hope you can answer my question. Thanks godbless

How to changed old apple ID in AppStore? I've already creat new one's but when I go to the AppStore the old apple ID always appear. Hope you can answer my question. Thanks godbless

No, your accounts will remain separate, any content that you download via either account will be tied to that account - so each account will only be able to authorise its own downloads on your computer's iTunes, redownload them, download updates to its apps, and make in-app purchases in its apps.
Is there are particular reason why you've created a new account ? If it's due to, for example, no longer having access to your old email account then you can update the email address on an account by tapping on the id in Settings > iTunes & App Store and selecting 'view apple id' on the popup and logging into it, via the Store > View Account menu option on a computer's iTunes (click the Edit button to the right of your id at the top of your account's screen), or via http://appleid.apple.com . If you want to re-use the email address on the account that you've just created then you will need to change that first

HT3702 How do I remove a credit card from my account without putting a new one on to my account?

How do I remove a credit card from my account without putting a new one on to my account?

https://discussions.apple.com/message/15891166

How to change value of instance variable and local variable at run time?

As we can change value at run time using debug mode of Eclipse. I want to do this by using a standalone prgram from where I can change the value of a variable at runtime.
Suppose I have a class, say employee like -
class employee {
public String name;
employee(String name){
this.name = name;
public int showSalary(){
int salary = 10000;
return salary;
public String showName()
return name;
i want to change the value of instance variable "name" and local variable "salary" from a stand alone program?
My standalone program will not use employee class; i mean not creating any instance or extending it. This is being used by any other calss in project.
Can someone tell me how to change these value?
Please help
Regards,
Sujeet Sharma

This is the tutorial You should interest in. According to 'name' field of the class, it's value can be change with reflection. I'm not sure if local variable ('salary') can be changed - rather not.

How to pull only column names from a SELECT query without running it

How to pull only column names from a SELECT statement without executing it? It seems there is getMetaData() in Java to pull the column names while sql is being prepared and before it gets executed. I need to get the columns whether we run the sql or not.

Maybe something like this is what you are looking for or at least will give you some ideas.
        public static DataSet MaterializeDataSet(string _connectionString, string _sqlSelect, bool _returnProviderSpecificTypes, bool _includeSchema, bool _fillTable)
            DataSet ds = null;
            using (OracleConnection _oraconn = new OracleConnection(_connectionString))
                try
                    _oraconn.Open();
                    using (OracleCommand cmd = new OracleCommand(_sqlSelect, _oraconn))
                        cmd.CommandType = CommandType.Text;
                        using (OracleDataAdapter da = new OracleDataAdapter(cmd))
                            da.ReturnProviderSpecificTypes = _returnProviderSpecificTypes;
                            //da.MissingSchemaAction = MissingSchemaAction.AddWithKey;
                            if (_includeSchema == true)
                                ds = new DataSet("SCHEMASUPPLIED");
                                da.FillSchema(ds, SchemaType.Source);
                                if (_fillTable == true)
                                    da.Fill(ds.Tables[0]);
                            else
                                ds = new DataSet("SCHEMANOTSUPPLIED");
                                if (_fillTable == true)
                                    da.Fill(ds);
                            ds.Tables[0].TableName = "Table";
                        }//using da
                    } //using cmd
                catch (OracleException _oraEx)
                    throw (_oraEx); // Actually rethrow
                catch (System.Exception _sysEx)
                    throw (_sysEx); // Actually rethrow
                finally
                    if (_oraconn.State == ConnectionState.Broken || _oraconn.State == ConnectionState.Open)
                        _oraconn.Close();
            }//using oraconn
            if (ds != null)
                if (ds.Tables != null && ds.Tables[0] != null)
                    return ds;
                else
                    return null;
            else
                return null;
        }r,
dennis

How to change Number of test socket in Model option during run-time

I wanna be able to change the the number of test sockets(in the Model Options menu) during runtime. I have overriden the Prebatch callback and used my own instead. I have a LabView program in my Prebatch where I would select the test script each time before running the batch. I wann be able to also modify the number of test sockets each time before I run the batch again. I tried setting the "Parameters.ModelData.ModelOptions.NumTestSockets" from the Labview program which is in my Prebatch before running each batch, but get into errors. Please help?

Hello Kumar,
The Batch process model shipped with TestStand does not handle this scenario, but you can still do this. Attached is a sequence file that utilizes the Batch Model's ProcessCleanup callback to reset the next execution point. It still uses the method of setting the Parameters.ModelOptions.NumTestSockets variable in the PreBatch callback. The change I added was three steps to a different callback (the ProcessCleanup callback):
Message Popup - prompts Yes or No to continue testing with a new batch size.
Statement 1 - based on the response to the message popup (via precondition), resets the Batch Model's next step to be executed and the ContinueTesting flag:
RunState.Root.RunState.StepGroup = "Setup"
RunState.Root.RunState.NextStepIndex = 0
RunState.Root.Locals.ModelData.ContinueTesting = True
Statement 2 - based on the response to the message popup (via precondition), loops to reset each TestSocket's ContinueTesting flag:
RunState.Root.Locals.ModelData.TestSockets[RunState.LoopIndex].ContinueTesting = True
These two statement steps force the next step to be executed in the Batch Process Model to be the first step in the "Setup" step group, and reset all necessary flags for the batch itself and the individual TestSockets. I discovered the flags that had to be reset by trial-and-error (that was the time-consuming part).
You can run continuous batches of the same size you first chose (for as long as you like), but when stop the batch execution this new message popup will prompt (yes/no) whether you want to continue testing with a new batch size. If no, then processing terminates. If yes, then the next two statement steps are run and execution resumes back at the beginning of the Batch Process Model's Setup step group. This forces the ModelOptions callback to be executed again, so your VI (in my example here it's just a Message Popop) can then set NumTestSockets appropriately.
Thanks for contacting National Instruments!
David Mc.
NI Applications Engineering
Attachments:
kumar.seq ‏27 KB

I want to know, if possible, how to change the names at the bottom of the tiles on the new tab pages.

For instance, my tile for my email says "[email protected] Yahoo! Mail". Can I change those words to anything I want such as say "Mail"? Thanks!
edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)

afaur wrote:
I want to know if an application could be written that would disable a phone/device from being turned off.
Not possible, apps simply do not have sufficient access into the OS to make it happen.

How to Dynamically Load jvm.dll without setting PATH

Please help, invoking CreateJavaVM via a function pointer is returning -3, but I'm not sure why.
When my PATH is setup up to include the jvm.dll and I invoke JNI_CreateJavaVM() directly, it works fine. But I want it to work regardless of my PATH setting, so I am trying to use LoadLibrary and dynamically load the jvm.dll and then a function pointer to invoke CreateJavaVM().
The LoadLibrary returns non-NULL result, the GetProcAccress() returns non-null, but when I invoke the pointer to the CreateJavaVM call, it returns -3. I know -3 is JNI_EVERSION error, but any ideas what is wrong with the code below, such that it would give me this error?
Currently my code is as follows:
typedef jint (JNICALL CreateJavaVM_t)(JavaVM **pvm, void **env, void *args);
JavaVM *m_jvm;
JNIEnv *m_env;
SetDllDirectory(L"C:\\Program Files\\Java\\jdk1.6.0_20\\jre\\bin\\client");
HINSTANCE hVM = LoadLibrary(L"jvm.dll");
if ( hVM == NULL ) {
// report error
CreateJavaVM_t *pfnCreateJavaVM = (CreateJavaVM_t*)GetProcAddress(hVM, "JNI_CreateJavaVM");
#ifdef JNI_VERSION_1_6
char cpChars[1024] = {0};
sprintf_s(cpChars, "-Djava.class.path=%s", classPath); // classpath is defined elsewhere
JavaVMOption options[1];
options[0].optionString = cpChars;
JavaVMInitArgs vm_args;
vm_args.version = JNI_VERSION_1_6;
vm_args.options = options;
vm_args.nOptions = 1;
vm_args.ignoreUnrecognized = JNI_TRUE;
pin_ptr<JNIEnv*> env = &m_env;
pin_ptr<JavaVM*> jvm = &m_jvm;
int result = pfnCreateJavaVM(jvm, (void**)env, &vm_args);
// This is where the failure occurs. result is -3 for some reason here...why?For some reason, pfnCreateJavaVM is returning -3, but I'm not sure why? Any ideas what is wrong with this code, such that it would give me a -3?
Thanks in advance,
Bill

wkoscho wrote:
For some reason, pfnCreateJavaVM is returning -3, but I'm not sure why? Any ideas what is wrong with this code, such that it would give me a -3?As an experiment try using a different jvm.dll from a different location. From my box there are several different jvm.dll under my jdk install dir.

How to change the SQL-Query in (Report in ReportViewer) by running Java App

Hello,
Ich have an App which generates dynamicly SQL-Queries. By pressing a button it should generate a report with this generated Query.
I´m using the ReportViewer.jar. Further is it possilbe to a extra parameters form app which are not in a DB?

There are a few ways that you can achieve this. If your SQL Queries have their filters modified (ie. WHERE clause) then this can be easily solved by adding report parameters to the Report filter. Search the in-product help for "Record Filter" and you should get a number of helpful resources returned.Additionally, you can pass in java.sql.ResultSet objects with a populated recordset of the data you want to show in the report. We don't currently provide any tools to assist the creation of the code stubs for thick-client applications (like we do for JSP pages) however you can download a collection of thick-client sample code from here:<a href="http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_desktop_samples.zip">http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_desktop_samples.zip</a> As I mentioned, this sample contains a collection of code snippets. The one in particular you will be interested in is titled "JRCResultsetDatasource". Hopefully, this will provide you with a few options. Regards, Sean Johnson (CR4E Product Manager)

How to Change Numeric Value into Character Value in Reports at run-time?

Hi,
I am creating some reports, in which i am facing a problem.
i have an AMOUNT field of "NUMBER" data type in a table, I want to show the AMOUNT value in Character at run-rime.
For example, if AMOUNT is 12000 then it should be converted into Character like "Twelve Thosand".
Please help me to make it clear.
Thanking you in advance.

u can get decimal points through this function
FUNCTION amt_2_word(amt varchar2) RETURN Char IS
BEGIN
 declare
 --TYPE v_arr IS VARRAY(6) of varchar2(3);
 len number;
 i number;
 t_amt varchar2(100);
 t_word varchar2(20000);
 last_3rd varchar2(1);
 main varchar2(1000); -- number in format main.sub
 --v_main v_arr := v_arr('00','0','00','00','000');
 v_main1 varchar2(3) := '00';
 v_main2 varchar2(3) := '0';
 v_main3 varchar2(3) := '00';
 v_main4 varchar2(3) := '00';
 v_main5 varchar2(3) := '000';
 sub varchar2(1000);
 res_1 varchar2(32000);
 res_2 varchar2(32000);
 res_3 varchar2(32000);
 res_4 varchar2(32000);
 res_5 varchar2(32000);
 res varchar2(32000);
 begin
 t_amt := lpad(amt, 10, '0');
 len := length(amt);
 i := instr(amt, '.');
 if i = 0 then
 main := lpad(amt, 10, '0');
 sub := '';
 else
 main := lpad(left(amt, instr(amt, '.')-1), 10, '0');
 sub := rpad(right(amt, len - instr(amt, '.')), 2, '0');
 end if;
 v_main1 := right(main, 2);
 v_main2 := left(right(main, 3), 1);
 v_main3 := left(right(main, 5), 2);
 v_main4 := left(right(main, 7), 2);
 v_main5 := left(main, 3);
 if v_main1 <> '00' then
 res_1 :=getTwo(v_main1);
 end if;
 if v_main2 <> '0' then
 res_2 := getOne(v_main2) || ' Hundred ';
 end if;
 if v_main3 <> '00' then
 res_3 := getTwo(v_main3) || ' Thousand ';
 end if;
 if v_main4 <> '00' then
 res_4 := getTwo(v_main4) || ' Lac ';
 end if;
 if v_main5 <> '000' then
 last_3rd := left(right(v_main5, 3), 1);
 if last_3rd <> '0' then
 res_5 := getOne(last_3rd) || ' Hundred ';
 end if;
 res_5 := res_5 || getTwo(right(v_main5, 2)) || ' Crore ';
 end if;
 res := 'Rupees ' || res_5 || res_4 || res_3 || res_2 || res_1 || ' ';
 if sub is null then
 res := res || 'Only';
 else
 res_1 := getTwo(sub);
 res := res || 'and Paise ' || res_1 || ' Only';
 end if;
 return res;
 end;
END;
u write this PL SQL in ur databse and u can use this function and get amount to word

How to copy and use the RAID files for ATI SB600 for a new build

WinXP Home
MSI K9A Platinum
AMD Athlon X2-3600+
2 x Seagate 250GB SATA2 3GB/s HHD
2 x HIS X1950Pro in Crossfire
2 x OCZ2A8002GK Crossfire certified modules
Enermax Galaxy 850
Hello, I plan on setting this new build up with SATA RAID 0. I tried to follow the ReadMe file in the RAID drivers download but think I am not fully understanding. The ReadMe says to copy all files to the media...it said floppy but I am going to use a flash drive. I did so but there were two folders, X64 and X86. Do I open those two folders and copy all the contents or do I just copy the two folders directly to the drive?
Thank you

Quote from: lewislink on 05-July-07, 02:13:43
Open the sub-folders and copy their contents, or copy the sub-folders, themselves?
What about BIOS update? Will it be necessary to use a floppy or can a flash drive function?
"What about BIOS update? Will it be necessary to use a floppy or can a flash drive function?"
don't update the BIOS when everythink is working...
"Open the sub-folders and copy their contents, or copy the sub-folders, themselves?"
copy them as is.. directly with sub-folders included.

How do you create a separation on iCloud between devices without creating a new apple id?

For Example my parents have used the same itunes login to download all there music and apps, since before iCloud came into existence but now that they both have 5S' they dont want to share all of there icloud stuff like photos and app downloads because they dont all the same apps.

Why do you want to do that?

How to Change Password throgh ABAP

Hi All,
Could you please tell me How to change password Through SU01 without having role.
When i am going to click change password button it giving error message you are not authorize to change password.
How to change through Debug mode.
Regards,
Arif

Hi,
Firstly ,you are not supposed to do something that you are not authorised to do.
But still you need access by bypassing the Authorization then here is the way.
Create a Breakpoint in FM RS_TRANSACTION_TEST at line no - 34 .
1.Go to tcode SE93.
2,Enter Tcode as 'SU01'
3.start the debugger by putting '/h' in the command line and then execute.
4.You debugger will stop at line no 34 of FM RS_TRANSACTION_TEST.
5.the value of sy-subrc will be '4' at that point...CHnage the value of su-subrc to '0'. and then execute.
OR use FM - BAPI_USER_CHANGE
Regards,
Vikas

How to change a 'debug' dll to a 'release' dll (without running a new build)?

Similar Messages

Maybe you are looking for