How to change abap/buffersize
Hallo!
I would like to increase Profile parameter "abap/buffersize".
I tried to do this with TCode RZ11(Maintain Profile Parameter Attributes), where I couldn't change any parameter.
I tried to log on as DDIC and SAP* but no success.
Pleas help me.
Thank you in advance.
Best regards,
Mihail
This is Basis Work. If you are not a basis person, better talk to them before you change anything.
Goto RZ10
Click on the drop down button for </b>Profile</b>.
If you do not have any profile in that. Import the profile.
<b>RZ10 --> Utilities --> Import Profiles --> Of active server</b>
Then do the drop down on <b>Profile</b> again. This time pick the one with <b><sysid>_DVEBMGS<system number>_<hostname></b> which is an instance profile.
Choose Change.
In the next screen if you see ur parameter change it, otherwise, you can add one. Do not forget to save the changes.
Similar Messages
-
How to increase abap/buffersize?
Hi Gurus,
I am getting PXA problem in Version 5.0 ECC, System is displaying a message PXA is very small, increase abap/buffersize.
Kindly help me how to increase abap/buffersize?
Thanks
Chandraraising shared memory buffers.
growing them will automatically shorten the maximum available memory for ABAP user transactions.
if you grow them to high, you might no longer be able to start the ABAP-Server.
(in case of insufficient contigious memory blocks for shared memory)
peter -
How to change default PIRWBUSER password for ABAP Proxy monitoring ?
Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
FernandHello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani -
How 2 Change of column wise o/p to row wise output in ABAP?
Hi all,
I am getting the output in column wise as normally but how can I get the ouput in row wise.in ABAP.
its urgent. can any one help me how to change the output layout?
thanks in advance,
Sakthi.Cif it is normal report .then
go through the write statents . one of that is below
Loop at itab .
write : itab .
endloop.
if it is ALV then you have to define an internal table which are the fieldds you want palce in the Row .
so that
data c type i value '1'.
loop at itab .
fieldcatalog-fieldname = itab-field.
fieldcatalog-col_pos = c.
append fieldcatalog to fieldcatalog.
clear fieldcatalog
c = c + 1.
endloop.
so that the Col_pos will be increased and the Column data will be moved into Row .
reward points if it is usefull...
Girish -
How to Changing Productive Client in an ABAP+Java System?
How to Changing Productive Client in an ABAP+Java System?
1. Log on to the ABAP system.
2. Call transaction SPRO.
3. Go to SAP Solution Manager Implementation Guide -->
SAP Solution Manager --> Basic Settings --> SAP Solution Manager
System --> General Settings --> Client Copy
4. Perform the following steps:
a) Maintain Profile Parameters
b) Create Client
c) Copy Client 000
d) Convert UME -
How To change UME Data source from Abap to Java.
Hi Experts,
Can any one give me Detailed Steps of how to Migrate from UME Data Source from Abap to Java, as the Ume Data Source is initally configured for Abap.
Regards,
SivaSiva,
Please search before you post a question.
This has been discussed many a times in here. Please refer to this [thread|To change ABAP UME database to Portal database;.
Good Luck!
Sandeep Tudumu -
How to Change Password throgh ABAP
Hi All,
Could you please tell me How to change password Through SU01 without having role.
When i am going to click change password button it giving error message you are not authorize to change password.
How to change through Debug mode.
Regards,
ArifHi,
Firstly ,you are not supposed to do something that you are not authorised to do.
But still you need access by bypassing the Authorization then here is the way.
Create a Breakpoint in FM RS_TRANSACTION_TEST at line no - 34 .
1.Go to tcode SE93.
2,Enter Tcode as 'SU01'
3.start the debugger by putting '/h' in the command line and then execute.
4.You debugger will stop at line no 34 of FM RS_TRANSACTION_TEST.
5.the value of sy-subrc will be '4' at that point...CHnage the value of su-subrc to '0'. and then execute.
OR use FM - BAPI_USER_CHANGE
Regards,
Vikas -
How to properly configure server in order to increase abap/buffersize to
Hello . I have an Solution manager system running on 32 bit kernel on windows 2003 server (32 bit) with 5GB of ram(Control panel->system...)
I have parameter:
PHYS_MEMSIZE 1024
abap/buffersize 450000
em/initial_size_MB is(default) 1024
in Sql Managment studio I have (minimum and maximum server memory under properties of server) set to 1024
Java has 1024
I would like to increase abap/buffersize (have some swaps there) but the system does not start(in J2EE Process table server0 does not start after startin framework fails
I tried also to decrease PHYS_MEMSIZE ,em/initial_size_MB and Heap memory size(XmX) in configtool but in any case the server does not start.
What do you propose to properly configure server
Thank you in advanceHello jan Bo,
first of all you should make sure that the /3GB option is set in the boot.ini.
The problem is that you only have a 3GB viruall address room on a Windows 32bit system. So if you want to increase a memory area in this address room you must decrease an other one.
In the most cases the default settings for the roll and page shared memories are set up very generously. Please check the maximum used values in ST02 and decrease the size of the both shared memories. After that you can add the memory you got free here to the programm buffer.
For example if you want to set the roll and page shared memoies to 64M you should set the profile parameters:
rdisp/ROLL_SHM = 8192
rdisp/PG_SHM = 8192
The unit is 8KB (8192 * 8KB = 65536K = 64M).
Regards, Klaus -
How to change the text in Footer
Hi SAP Gurus,
Am not ABAP expert, currently I have one change request that we have one SAP form. in that Form we have Footer window to print the footer in the out put, currently my requiremtn is i need to delete some of the lines in the footer text and add some other lines, but in the change additor I found this statement INCLUDE ZXX_ZXXXXX_FOOTER OBJECT TEXT ID ST PARAGRAPH TC, where I can check that object and how to change it. please give guide me step by step.
Thanks & Regards,
Murali.Hi,
Go to Tocde: So10
Give as follows:
Text Name :ZXX_ZXXXXX_FOOTER
Text ID ST
Language EN
and enter change mode, change whatever modifications you want.
after run Standard program: RSTXTRAN for adding Standradt text to transport request
Regards
Jana -
How to change the format in sap script
Hi,
I am working on a report which calls a sap script and i have to modify the script i.e. the values which are displaying in it. i had never worked on SAP SCRIPTS ,plzz provide me guidlines how to change the format of the data displayed in it.hi,
this will give you the whole idea about the scripts in SAP the t-code is SE71.
refer this link::
[SAP SCRIPTS|http://help.sap.com/saphelp_40b/helpdata/en/d6/0dc169494511d182b70000e829fbfe/applet.htm]
[WIKI|https://wiki.sdn.sap.com/wiki/display/ABAP/FormPrinting-SAPscript%2CSmartforms]
regards
sarves
Edited by: Sarves Sombhatla on Feb 20, 2009 1:38 PM -
Hi
I have a small issue that in ABAP editor, screen is displaying like script editor and allowing me to delete the lines one by one ratherthan deleting all the lines at the same time.could u plz tel me,how to change the settings to allow the user for multiple lines selection?
I m using the version 4.5b.
Thanks & Regards
RavindraHi,
refer u may get an idea.
https://forums.sdn.sap.com/click.jspa?searchID=4333019&messageID=3617437
Regards -
How to change Error Message into warning message
Dear Friends,
I am getting an error
The qty stored that was entered is adjusted
Message no. XU 040
at the time of GRN. I am maintaining batch specific Unit of Measure.
Please tell me how to change this error message in to a warning message.
Thanks
Prashant AtriHello Prashant,
This is satndard SAP messagge which is maintained in customizing;
SPRO>>Logistics - General>>Batch Management>>Define Attributes of System Messages
Here you can convert this messages to warning message. I urge you to please check with abaper as this may be hardcoded message and it may have implications on valuation and posting.
In the above IMG path you can do the changes
Br,
Tushar
Edited by: Tushar Patankar on Jan 1, 2011 5:36 PM -
How to change workflow for expired qualification in HR Module
Hi,
My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
I have serached sap help but i am not understand please below mention URL for SAP help
Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
Please explain step by step how to trigrred workflow for expired qualification?
Please this problem is high and try to solve it.
Thx!
SachinHi,
Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
Hope I am clear and this helps and if you need more details, reply.
venu -
How to change the Profit Center in Sales Order
Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PMHi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM -
How to change posting period for a company code
Hi Gurus,
In MIGO while doing goods receipt i get this error " Posting only possible in periods 2006/05 and 2006/04 in company code 3000"
How to change the posting period.
I have serched in SDN, i tried transaction MMPV, and OB52 but i am not able to change as i dont know the basics of the screen as i am ABAPER.
Can u tell me how to change. or give sme link with some snapshots.
Thankshi
I think you need to check your fiscal year varian before you do the MMPV. Fiscal year is set up by the FI consultant and it is deciding in which fiscal year period your current month belongs to.(Transaction -OB29)
Ex:
if you use K4 fiscal year variant then this october month is treated as 2010-07 period. Because the fiscal year starts from April and 2010 fiscal year starts from 2009 april.
Calendar Year Fiscal year
2009 april = 2010 - 01
2009 may = 2010 - 02
2009 Oct = 2010 - 07
So first get the fiscal year and period accurately (I suggest get it from your FI guy) and put it in the MMPV
If you accidentally close a wrong period dont forget to follow these notes too.
545952,369637 AND 487381
thanks & BR
sandun
Maybe you are looking for
-
Hello All, I have customized an oracle application program with xml publisher.The program prints the report in PDF format. My questions is where this output copied in the server .I am not able to find the pdf report in $APPLCSF/out/. Do i need to use
-
Dear Experts, In the testing client the default tax calcualtion procedure is not available in our system for india. This may be deleted by oversight. Can you please suggest how to retireve this data Venkatesan
-
Hi .. my requirement is the program should prompt for 3 parameters (all check marks) with the follwoing text; all check marks enabled by default - Variables - Key Figures - Structures So when users select variables then do this part in main program
-
hi all, i am having a list in which there are 4 elements in it. i need to remove the first and third elements in the list and make an iterator out of the modofied list i can create the iterator but can any one help me in removing specific elements in
-
Hi, I want to add a discoverer viewer function to my menu to load all available workbooks shared with a user. I can use the seeded AMS_LAUNCH_DISCO to load specific workbooks but what would be the parameter to view all workbooks the same as if you'd