How to properly configure server in order to increase abap/buffersize to

Hello . I have an Solution manager system running on 32 bit kernel on windows 2003 server (32 bit) with 5GB of ram(Control panel->system...)
I have parameter:
PHYS_MEMSIZE 1024
abap/buffersize 450000
em/initial_size_MB is(default) 1024
in Sql Managment studio I have (minimum and maximum server memory under properties of server) set to 1024
Java has 1024
I would like to increase abap/buffersize (have some swaps there) but the system does not start(in J2EE Process table server0 does not start after startin framework fails
I tried also to decrease PHYS_MEMSIZE ,em/initial_size_MB and Heap memory size(XmX) in configtool but in any case the server does not start.
What do you propose to properly configure server
Thank you in advance

Hello jan Bo,
first of all you should make sure that the /3GB option is set in the boot.ini.
The problem is that you only have a 3GB viruall address room on a Windows 32bit system. So if you want to increase a memory area in this address room you must decrease an other one.
In the most cases the default settings for the roll and page shared memories are set up very generously. Please check the maximum used values in ST02 and decrease the size of the both shared memories. After that you can add the memory you got free here to the programm buffer.
For example if you want to set the roll and page shared memoies to 64M you should set the profile parameters:
rdisp/ROLL_SHM = 8192
rdisp/PG_SHM = 8192
The unit is 8KB (8192 * 8KB = 65536K = 64M).
Regards, Klaus

Similar Messages

How to properly configure a home network using both Mac and PC computers

Is there a book or set of guidelines that can tell me how to properly configure (exact specifications) my computers in a home network? Here is what I am trying to do and using:
1) Three computers: iMac (late 06 ver), Macbook (newest version), Dell laptop. The two Macs are using Leopard and the PC is XP.
2) Bellsouth modem which feeds into the Airport Extreme Base Station (AEBS)
3) The AEBS has a USB hub which is connected to a external hard drive and two inkjet printers. A third laser printer/scanner/fax machine is connected to the AEBS via ethernet.
4) All three computers use a wireless connection to the AEBS.
I would like the following:
1) Have a secured and password driven network - don't want outsiders connecting to the nework without permission.
2) All computers to be able to access the USB printers and ext HD.
3) The two Macs to read/write to each other with password access
4) The iMac to have read/write capabalities over the PC via VSFusion or Bootcamp if possible.
Currently, all three have Internet access via the AEBS and can print on the ethernet printer. Both Macs can see the Bonjour USB printers and print (however they to do not display on the AEBS configuration display utility and neither does the ext HD). The USB ext HD is shown on the iMac desktop and I have access to it, but does not display on the MacBook. I have not checked if the PC sees the external HD and it really does not matter if it ever does, although it would be nice.
I am hoping that there is some standard configuration that I can "cut and paste" that is generally used to allow a home network to share resources while still being secure.
Any advice and help is greatly appreciated.
Thanks,
Andrew

Andrew,
What you would like is fairly complicated so this will probably be a lengthy post, but hopefully I can assist you.
As others here have pointed out, networks can vary widely, but the best networks have one element in common: planning. The first thing you need to think about is how you would like all of these systems to cooperate. For instance, do you want one of the machines to serve files to the others and be a central repository, or are you just interested in having them share documents on occasion so that you don't have to carry around, say, a USB key all the time? That said, here is a basic list of things I think you should look into.
1. Network Basics
First step is to get your local network set up. I'd go for WPA or WPA2 wireless security as they are relatively strong standards and you can use human-readable passwords. Additionally, unless you have an explicit need for someone outside your network to initialize a connection (Windows' RDP for instance), do not allow any passthroughs or port redirects on your AEBS.
2. Network Topology
Decide how you want computers and networked devices to identify themselves and their relative locations in the network: in short, do you want static ip's or dynamic ip's? Most of the time, static IP's can be assigned on a DHCP router, the trick is to assign the statics higher than your number of devices (or lower on some routers - for instance Linksys routers start DHCP at 192.168.1.100 but you could have statics from 192.168.1.2 to 192.168.1.99). For instance, it is impractical to set a laptop to static because I'm often in coffee shoppes and other environments that assign via DHCP; on the other hand, it's a good idea to have a printer be static so that you always know where to find it. So, I have 10.0.1.x network (default on AEBS), and the printer is 10.0.1.24, since the likelihood of my encountering an IP conflict with 4 computers on the subnet is virtually zero. If you configure a static device behind your AEBS, defaults are usually
Default Gateway 10.0.1.1
IP Address 10.0.1.(your choice)
Subnet Mask 255.255.255.0
3. File-sharing.
3a) Mac OS X has a built-in SMB/CIFS (Windows file & printer sharing protocol) client, and a basic SMB [samba] server can be enabled in the sharing preference panel (enable file and/or printer sharing). Windows XP can use these shares, but must authenticate. For that reason, you may not be able to see your shares in the Network Places browser, however you should be able to get to them by mapping the network drive (tools menu) or executing RUN with \\computer.name\share.name. You will then be able to type in your credentials. I would also suggest relatively simple names for the Macs in question (set in Sharing preference pane). Typing Andrew's-iMac-G4 in every time you want to find it will get irritating after a while to say the least, especially if you need to troubleshoot.
3b) The reverse works similarly. You can Connect to Server... from Finder to get to the Windows shares. To do this you must have Windows File and Printer sharing enabled (most easily through the Network Setup Wizard in Control Panels - Use Classic View). It's really easy if your account names and passwords are identical on the Mac and PC, because when loading user profiles, the Mac will generally automatically try to authenticate against the Windows machine with your Mac logon credentials. (Windows seems to do this against the Mac as well) You can write an Applescript or there are some PLIST modifications you can make to mount Windows shares at login.
4. Printing
I'm not exactly sure what you had in mind here since I'm not sure what's connected to which computer or directly to the network. If it is possible, I personally find putting my printers directly on the network to be the easiest thing. Especially if printing large PDF or graphics files, the spooling on the host system can really slow the computer down, and slow down printing. For example, I used to have a laserjet on a Windows box and had to print a very large file. Going through a Win print server, it only printed a page every 30 seconds, but when I got a jetdirect adapter, the whole thing was done in under two minutes. If you have HP Printers, I would recommend the jetdirect print servers (I have used with both a laserjet and a supposedly unsupported color inkjet).

How will i configure stock transport order

how will i configure stock transport order...

Hi,
sto dividw into two type
STO with sd
STO with out SD
1) STO with out sd
here STO divide in two steps
1) tranfer the good one storage location to another storgae location
go to the tCODE MB1B , GIVE the movement type 301, give the plant ,storage location, and recevied storage location
go to the mb1b , give the movement 303, give thesuppling plant
then give the reciing plant
save then go to the mb1b then give the movement type 305
thanks
please reqrd

How do I configure Server 3.0 to deliver "undeliverable" mail to a specific "catchall email address?

How do I configure Server 3.0 to deliver "undeliverable" mail to a specific "catchall email address?
I had this working in Server 2.0 dunno why it doesn't now, but I can't find the config.

It's fairly straight forward and there is a GUI option to help you.
In the Server app, go to Users. Select the User you want to create email aliases for. Right click, or hold down Shift-Ctrl and click on the name. Select 'Advanced Options...' from the menu. You can then enter as many aliases as you want in the 'Aliases'.
For example: [email protected], @xyz.co.uk, [email protected]
My example is overkill as I only really needed to add '@xyz.co.uk' as a catch all get everything sent to that domain delivered to that users email address.

How to increase abap/buffersize?

Hi Gurus,
I am getting PXA problem in Version 5.0 ECC, System is displaying a message PXA is very small, increase abap/buffersize.
Kindly help me how to increase abap/buffersize?
Thanks
Chandra

raising shared memory buffers.
growing them will automatically shorten the maximum available memory for ABAP user transactions.
if you grow them to high, you might no longer be able to start the ABAP-Server.
(in case of insufficient contigious memory blocks for shared memory)
peter

How will i configure intercompany sales order

pls tell me how will i configure for intercompany sales order

Hi,
Intercompany Sales & Business Processing
An Intercompany sale transaction takes place when a sale occurs & the selling sales orgn belongs to a different company code than that of the delivery plant.
Intercompany business processing describes business transactions, which take place between two companies (company codes) belonging to one organization. The ordering company orders goods from a plant, which is assigned to another company code.
Ordering company Supplying company
Company code: 5555 1000
Sale Organisation: 5555 PBIL
Distribution channel: 56 PW
Division: 58 GC
Plant: 5555 1000
Customer: 215 Product: Nimulid
Ent Stru- Assignment- SD- Assignment- SD- Assign Sales Orgn: Distbn Channel- Plant
Sales Orgn Distbn Channel Plant
PBIL PW 1000/ 5555
5555 56 5555/ 1000
SPRO- IMG- SD- Billing- Intercompany Billing:
o Define Order types for Intercompany billing
o Assign organizational units by plant
o Define internal customer no by sales orgn
Assign Sales Doc relevant for Intercompany billing
IVo POR
IVo OR
Assign Organizational Units by plant: assign sales area of ordering company to the delivery plant.
o 1000 5555 56- 58
Plant Descp Sales Orgn Descp Distbn Descp Division Descp
1000 5555 56 55
Define internal customer no by sales orgn: create the customer of the ordering company in the company code of the delivering plant, but with the sales area of the ordering the company
Sales Orgn Descp Customer Inter Comp Descp
PBIL 215
Pricing procedure: PI01 (Intercompany pricing)
Determination Rule: OVKK
PBIL PW GC A 1 RVAA01
PBIL PW GC I 1 ICAA01
VK11: PI01
Create Order: VA01: POR: 5555-56-58: customer- 215, product- Nimulid, supplying plant: 1000.
Delivery
Goods issue
Invoice for customer
Invoice Intercompany billing
Processing an Intercompany sale:
To create an Intercompany sales transaction proceed with creating the standard sales order. In the sales order, change the delivering plant at the line item level & create a delivery for the new shipping point represented for the delivering plant. Proceed with the delivery functions of selecting the packing & posting the goods issue. Then create an external invoice that will be sent to the customer & create an Intercompany invoice. That will represent the billing doc between the delivering plant & the selling sales orgn.
An internal Intercompany invoice can be created by entering the delivery no again for processing when using the transaction VF01. One can also select the doc due for Intercompany billing by using the billing due list VF04. When using the billing due list be sure to select the Intercompany-billing doc as the documents to be used, by checking Intercompany billing.
A Check List for Intercompany sales processing can be the following:
The enterprise structure must be maintained correctly, i.e., the plants must be assigned to the correct company codes as well as to the correct combination of sales orgns & distbn channels.
The Intercompany customer must be assigned to relevant sales orgns
The delivering plant must be assigned to the sales orgn.
The material to be sold must exist in the original & delivering plant.
The sales order must be relevant for Intercompany sales & have an assigned billing doc type
The copy control rules must be defined between the standard invoice, such as F2, & the inter company invoice, such as IV.
The pricing proc may have a special cond type assigned to it. This special cond type may represent the price to Intercompany sales orgn or it may represent a special discount offered to the Intercompany sales orgn for the material sold
The standard system has the following cond types:
To represent the Intercompany price as quantity-dependent.
To represent the Intercompany condition as percentage.
regards,
sadhu kishore

How to properly configure a graphics card for Adobe Premiere Pro, SpeedGrade, and After Effects?

Alright, so I have the following system configuration:
2 NVIDIA Geforce GTX 970s
5960X CPU
MSI X99 Gaming 7 Motherboard
32 GB DDR4 RAM
256 GB and 1TB Samsung 850 Pro SSDs
Basically, although I have the whole system built together, I'm unsure how to check and know whether or not Adobe Premiere Pro is actually using the graphics card or not. I know that it has to be using some of it, otherwise it wouldn't launch properly (as I discovered from a recent experience.) However, I don't know if there are, perhaps, certain settings within the NVIDIA control panel that should be configured so that Premiere Pro can use the card to its full potential. Here is an example of what I'm talking about:
In other words, these are (I'm pretty sure) all of the default settings that the control panel applies to Premiere Pro. However, I'm not sure if there are any settings in here that I need to change or not. So what I'm looking for in a response to this question:
What settings, if any, should I change for Premiere Pro (as well as other adobe applications that can utilize all the strength of the GTX 970)?
How can I check the GPU activity to know that it's being used during a render? (For example, I can check the CPU utilization with the Task Manager while I render to see that it's being utilized to 100%).
If, perhaps, something else goes wrong and even with the right settings, let's say the card still isn't being fully utilized, what other settings might I have to change to make sure that the GTX 970 is being fully used by Adobe Premiere Pro/After Effects/SpeedGrade CC 2014?

If you want a benchmark to measure the performance of Premiere Pro's utilization of your: disk system, GPU and CPU use our Premiere Pro BenchMark (PPBM)
When you finish running the test and then run the script, you will get this report
This happens to be the result of my laptop (with SSD drives and a GTX 765M GPU)
The disk performance is self explanatory.
Number 2 is a seven layer very complex timeline with heavy CPU and GPU assistance, without GPU hardware acceleration (CPU only) it would take greater than 1350 seconds.
Three above is a measure of a exaggerated timeline using many, many GPU MPE accelerated effects and features that will use a GPU at 99% load (54 seconds above) and a CPU only export of the same timeline (802 seconds).
If you want to compare your results to others you have to register on the PPBM7 site to see the results.
EDIT! I corrected the number in 2 above originally I said 900 seconds but really it was greater than 1350 seconds

How do I configure Server DHCP for a shared-over-WiFi network connection?

Hey all,
Here's how my network is set up-
Comcast > Modem > DD-Wrt router >(Ethernet)> Mac Mini >(WiFi)> Macbook Pro, other devices.
I set the router to use the Mac Mini (with OS X Server) as the DHCP server, and I have the Mac Mini sharing the ethernet connection over WiFi.
The issue is that while my Macbook Pro can get an IP from the Mac Mini (as per DHCP settings), there's no internet connection. I'm not sure I even have the router IP set correctly, should it be the Mac Mini's IP or the router's IP?

I would normally use the router as the DHCP server but it should be possible to use your Mac mini as the DHCP server instead.
With regards to the WiFi, you would want to configure it in bridging mode, this will let WiFi clients and Ethernet clients be on the same subnet and the WiFi clients will then be able to request DHCP addresses from your server on Ethernet. This is the way I have my home network setup.
In the DHCP settings on your Mac mini server, you need to define the default gateway/router as being the IP address of your router. You also need to define valid DNS server addresses. If you running your own internal DNS server perhaps for Open Directory then this would be your internal DNS server address. The range of IP addresses you are issuing need to match the range being used internally by your router as does the subnet mask.

How can I configure a third party VME board with A24 address space using a VME-MXI-2?

Hi!
We are trying to establish communications to a Galil Motion controller with a VME interface. Galil states that they are using a A24 address scheme with A16 data space for their board.
I am confused how to configure that board in the VME chassis properly.
The base address provided by Galil is 91Fxxx, I am assuming that the lower three nibbles are the registers that I can talk to?!
How do I set the address range under the resource setting for that board?
Also, I noticed in MAX that one board shows up with a slot number unknown, one with slot #0 and this board I have set to slot #1. I assume that the unknown part is for the PCI card that makes up for the 1/2 of the PCI to VME bridge?
The VISA VIs (Register based access) returns either a bus error, an invalid offset specified or data. However, we are completely in the dark when it does return data, since the expected offset we are typing in causes one of the two errors.
Our assumption of the problem is that we do not understand how to properly configure that third party board as a resource. It has also happened that the resource manager is hanging up the PC completely. Not even CTRL-ALT-DEL works and the MXI activity LED on the NI-VME-MXI-2 board stays on during the hand up.
We would appreciate, if somebody could walk us through the configuration process, step-by-step. Specifically, please explain how to setup the base address and how the offsets relate to this on a A24 address scheme. We are completely new to the VME bus interface, so even trivial things may be unkown to us.
We have browsed NI's page and manuals for explanations, however, we could not find any answers to our questions.
We noticed a formula for an A16 board that takes the base address and adds the logical address to it plus 40hex. Do we have to do the same or something similar to the A24 board????
We also came accross an option that would allow the board (NI VME controller) to share its memory with A24 or A32 space? Do we need to enable that? What is the purpose for that?
Best,
Markus Tarin
www.movimed.com - Custom Imaging Solutions
www.movitherm.com - Advanced Thermography Solutions

When I did not get a response here, I had to open a ticket with support. The short answer is that you cannot customize the SAML response when using Azure AD as an IdP.
Response from support:
I discussed the issue with senior engineers to get action plan for this issue. After doing research Senior engineers updated me that we cannot add a custom attribute to the default
SAML response of Azure AD.
Below is the link to get the list of available attributes
https://msdn.microsoft.com/en-us/library/azure/dn195587.aspx
As default SAML response from Azure AD , we have email address of the user sent out as attribute value for the Attribute " NAME ".
They suggested me to configure the application we are trying to integrate with Azure AD in such a way that it transforms the Attribute " NAME " into " EMAIL
This was not particularly helpful in my case as I did not have any control over the 3rd party which specifically documented that they would not extract the email address from the name attribute.
Cheers,
Jeff

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?
I run a personal Server at my office. It's configured under my own domain as server.mydomain.com. It's setup that it properly receives and sends e-mail for mydomain.com. I use my own mailbox [email protected] to get all my personal mail.
I'm looking to add another domain as a secondary way for people to get to my content and information.
I want the same address [email protected] and [email protected] to arrive in the same mailbox at my server.
How do i do that?

it does look like you can add virtual domains in the GUI of Server.app on at least some versions, but I don't have an OS X Server 10.8 version handy to check.
I'd encourage spending some time to learn the command line. In general, the payoff for learning the command line will be worth the effort expended. You're running a mail server here and sooner or later the capabilities of the GUI will fail you. This whether due to a configuration omission in the GUI itself, or due to the need to troubleshoot a malfunctioning mail server, a need to automate one or more of the Postfix-related sequences, or some other IT-related task. Entirely FWIW, of course.
Here's a cut-and-paste of the sequence just used to test the command line access to the Postfix configuration, first fetching the current value, appending example.com as the second domain, then displaying the new value, then restarting the Postfix server. Don't enter the dollar signs; just the postconf command and following. Adjust example.com to match your domain...
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost
$ sudo postconf -e 'mydestination = $myhostname, localhost.$mydomain, localhost, example.com'
Password: {your admin password here}
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost, example.com
$ sudo postfix reload
The Postfix and Postconf commands work irrespective of the OS X Server version; the tools reference the data files as needed.

HT5697 How do i configure os x server wiki to use the external web server?

I have a Mac mini Server with OS X 10.10 and Server 4.0 running in a DMZ behind a firewall. The firewall passes a select few ports through to this server, exposing services to the Internet.
I use two domains, one dummy domain only available on my local networks, and one proper domain available globally. Lets call them «example.lan» and «example.com». These domains are not hosted on the Mac mini, btw.
In the external domain, I have «server.example.com» registered on my firewalls official IP address.
In my internal domain, I have «server.example.lan» registered to my Mac mini internal (rfc1918) IP address.
Server 4.0 -> Websites seem to work as expected. I have three servers configured: «Server Website - All IP addresses», port 80 + 443. These serve the local networks. Then there is «server.example.com», port 443, serving the internet.
Now to my question: How to I control which of these websites we Wiki uses?
When I activate the Wiki, it is published on «server.example.lan/wiki», which seems rather pointless. In order for the wiki to be available to the internet, it needs to be published on «server.example.com/wiki», but I see no way of doing this. What am I missing here?
Regards,
Gakke

it does look like you can add virtual domains in the GUI of Server.app on at least some versions, but I don't have an OS X Server 10.8 version handy to check.
I'd encourage spending some time to learn the command line. In general, the payoff for learning the command line will be worth the effort expended. You're running a mail server here and sooner or later the capabilities of the GUI will fail you. This whether due to a configuration omission in the GUI itself, or due to the need to troubleshoot a malfunctioning mail server, a need to automate one or more of the Postfix-related sequences, or some other IT-related task. Entirely FWIW, of course.
Here's a cut-and-paste of the sequence just used to test the command line access to the Postfix configuration, first fetching the current value, appending example.com as the second domain, then displaying the new value, then restarting the Postfix server. Don't enter the dollar signs; just the postconf command and following. Adjust example.com to match your domain...
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost
$ sudo postconf -e 'mydestination = $myhostname, localhost.$mydomain, localhost, example.com'
Password: {your admin password here}
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost, example.com
$ sudo postfix reload
The Postfix and Postconf commands work irrespective of the OS X Server version; the tools reference the data files as needed.

How do I configure my system so that Oracle 10g properly shuts down and sta

How do I configure my system so that Oracle 10g properly shuts down and starts up when I reboot my Solaris system?

http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref255

How to properly load balance between diffrent server farms.

Hi experts,
We are using an ACE 4710. We chose for our server farms to load balance using the least_connections predictor. it seems to work fine inside the same server farm but is it working properly between server farms? It doesn't seem because some of my real servers seems to be more loaded than others. Each server farm are using the same real servers.
Any idea about what is the problem or any suggestion regarding the best load balancing predictor we should use using this kind of configuration?
Thank's to all.

The ACE uses load-balancing algorithms or predictors to determine how to balance the traffic among the devices configured in the server farms, independent of the device type. For FWLB, we recommend that you use only the hash address source and the hash address destination predictors. Using any other predictor with FWLB may fail and block traffic, especially for applications that have separate control and data channels.
Here is the configuration guide for the Cisco ACE 4700 Series Appliance Server Load-Balancing.
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA1_7_/configuration/slb/guide/fwldbal.html

Can Time Capsule be used as a time machine on a Windows Server. Is this possible, and how do i configure this?

I like to use the new TC in my office as a time machine on a Windows Server. Is this possible, and how do i configure this?
In fact my plan is to make the first back up by connecting to the server via an ethernet cable, but thereafter i like to bring the TC to my home and perform the incremental backups over the internet. This is for safety reasons, in case for example the office is broken into, or flooded, or fire (god forbid).
I sincerely hope it is possible, and not complicated.
Alternatively i would not mind replacing our current Windows server 2003 with an Apple server, but all computers in the network (except mine) are Windows 7 or 8. Would it work?
Thanks in advance.
Paris

I will consider the WD My Cloud device.
It is a NAS.. it is designed to provide a cheap centralised file storage.
What is NAS?? http://en.wikipedia.org/wiki/Network-attached_storage
A file server like windows uses heaps of power to do very little.. in your setup.. In most setups like SBS it will do exchange server and provide a heap of useful connectivity to your clients.
Since you are not using the windows server in anything but simple file serving you can replace with a NAS..
Problem with the TC is, it is a router with a hard disk inside.. designed specifically for Time Machine.. it fails to provide what a NAS does.. easy access to any clients, local or remote.. TC is designed by apple for apple and the rest of world is not really invited to the party.
It provides no backup.. no data protection.. and is so specifically apple orientated I do not think it works at all well with windows.
For a simple example.. windows will have file issues with large files.. because it is only NTserver FAT32 to windows.. bad luck if you have large files.. !!
Plainly if you use active directory in windows that facility is gone.
I just like Apple products, find them more stable than Windows and easier to use. Plus i can access the server from home if it is an Apple Server.
If you only need remote access for yourself that is fine.. too bad for the windows clients I guess.
Or you open it up to the world and bad luck for security.
Apple do not design for mixed environment.. in fact with the TC there is no provision for windows access officially at all.. so anything you do is a fudge.
You can use the TC for your Mac backups within the network.. that is fine. Apple provide no software at all to help with your windows clients.

For the AD FS Wizard how do I configure a certificate so I can run WCF applications on my server

For the AD FS Wizard how do I configure a certificate so I can run WCF applications on my server.
Certificate Status: This CA Root certificate is not trusted because it is not in the Trusted Root Certification Authorities store.
In IIS under Server Certificates:
IIS Express Development Certificate
It will not let me "Complete Certificate Request" because I do not have a ".cer" certificate file.
How do I get ".cer" file for this Certificate or maybe make one in IIS 8.0 not Express?

You need to make the certificate trusted by adding it in the Trusted Root Certification Authorities
store using Certificates snap-in. You can use Certificates
snap-in in MMC to export the certificate in a .cer file.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How to properly configure server in order to increase abap/buffersize to

Similar Messages

Maybe you are looking for