How to change battery in all-in-one G3
I know we have an all-in-one G3 with a dead battery. Where can I go to find out how to get into an all-in-one and change the battery? I have changed the battery in desktop G3.
Mary Lou
The battery sits near the end of the sound card, in a little black holder. It is 3.6 Volts, 1/2 the length of AA battery. Radio Shack carries them because they sell an alarm system that uses them (they do not care that it fits in a Mac).
To remove the cover on the little black holder, you must apply pressure outward along its length. This appears to be impossible, but a very slender object such as a jeweler's screwdriver can be inserted just inside the end to apply outward pressure and release the cover.
To access the "works in a drawer", you first need to check for the four retaining screws -- above and below the PCI slot covers and in symmetrical locations on the other side. Once these screws are removed, use the handle-shaped indentation in the plastic below the built-in Display port to pull the drawer open. Sometimes it puts up quite a fight, but it will slide open.
You will be looking at the connectors-side of the motherboard (opposite the way MacGurus draws them) The battery is in the side far away from you, in line with the sound card.
http://www.macgurus.com/products/motherboards/mbppcg3allone.php
If you ever need to remove the drawer completely (which is very helpful for some more involved servicing), there are only 4 cables that must be disconnected. If you place your hands under the drawer you can release the latches that keep it from sliding all the way out by accident.
Similar Messages
-
I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location. They are pictures taken at different times and have the same number I guess.
In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
LN -
My itunes library has duplicated "ALL" my files with their individual iclouds. How do I delete them all in one single swipe rather than delete each one individually?
Try Edit > Preferences > Store and untick Show iTunes in the Cloud Purchases. With luck it should be OK if you turn it on again.
tt2 -
I have clicked on to a app and now my apple store app is Spanish andi don't know how to change it back can any one help me?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done". -
Multiple Digital Signatures - How do I combine them all in one document?
I am currently attempting to gather signatures from multiple people and combine them all in one document. How do I do this?
Hi Dave Sykes,
Welcome to the Support Communities!
The article below will explain how to upate the information in your iTunes library:
iTunes 11 for Windows: Edit song and CD information
http://support.apple.com/kb/PH12360
Information about each item in your library is stored in the item’s Info window. To open the Info window, select the item and then choose File > Get Info.
Change the name of the song, artist, or album
Select the information you want to edit.
Type the new information.
Press Enter.
Edit song or CD information
Select the song or CD you want to edit, and choose File > Get Info (or press Control-I).
Click Info and make your changes.
Tip: If you’re changing the same information (for example, the genre) for multiple items, you can select all the items and change the information for them at the same time.
I hope this information helps ....
Happy Holidays!
- Judy -
I seem to have many Apple accounts but want them all in one.
How do I do this as my email provider has changed and I can not seem to combine them and use my credi on Itunes and or get books I already paid forCorrect.
Each Apple ID is a separate account. There is no way to combine them. If there were, it would make it very easy to defeat copyright, ownership, etc. -
3 ipads, 2 ipod touches, two apple i.d.,..how do i put them all on one computer?
In our household we have three ipads, two ipod touches, four ipod shuffles, and one (very old) ipod...plus two Apple I.D.s. How do i put them all together on one apple i.d. and one computer?
Apple ID's cannot be merged, however, a single iTunes can be authorized for up to five Apple ID's.
the following support article may be useful:
How to use multiple iPods, iPads, or iPhones with one computer -
How to connect my hp all in one printer to a new wifi hub?
i have a printer all in one and its abiut 3 years old ! we desperately need to print off some documents but are rrally struggleing. we have not used the printer for a long time and since the last use we have got a new wifi hub and new computers all of which are windows 8! i have 2 questions firstly the most important being - can you setup a hp all in one printer onto a windows 8 laptop? and secondly how do we connect our printer to a new wifi hub?
if it is possible to setup the printer onto a windows 8 pc how do we do it?
thanks, lucyPlease provide the following relevant information so someone can help including:
Printer Model -
Detailed Problem Description -
Operating System of computer (including service pack revision) -
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns.
If wireless, status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
How To Change the Tempo of Just One Track?
I want to change the tempo of just one track of a song, but when I change the tempo of one track, the tempo of the whole song changes and gets messed up. Does anyone know how to just change the tempo of just one track of the whole song.
You can not change the tempo of a single track, in GB it's one tempo per song.
The only workaround would be to change the tempo, export only that track (soloed), and then drop the export back into your project (with it set back to the proper tempo) -
How portable is the apple all in one
how portable is the imac if you wanted to take it with you
Hi Don
The iMac is not made as a portable computer, so to answer your question - not very.
But its not too difficult to move around, as there is not a separate tower/display, its all-in-one, which makes things easier
If you have a G5, then this article is always good for a bit of a laugh
Taylor -
How activate bluetooth at my all in one 23 hp
just i want to know how activate the bluetooth of this computer has bluetooh for speakers?????
Hi,
What is your "all in one 23" ? Please look at its back to find a label which shows the model/product of your "all in one 23".
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How to change gain or volume of one sample or loops in GB that remains fixed to it?
I am not talking about automation,nor am I talking about track volume.....
automation is a change for a place....if you happen to move that loop or clip from that place the pitch volume or tempo change is gone.....I want to change the volume of that one clip ......that remains specific to that part no matter where you move it....."fiddling' with those points and lines" is called creating "automation" and every pro user in Logic or any other DAW is doing that constantly. It is actually great that GB has this advanced feature (to some degree)
But you are right, the command for muting a Region should be included in GB. The other command for applying a simple gain offset to a Region wasn't even possible in Logic until recently.
If you feel strongly about specific features that should be available in GB, just send it to the GB Feedback. Most of the features are there (based on the underlying Logic code base). Apple just have to be convinced to enable a feature because they are convinced that most of the GB users need it.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
How to put grouped results all on one line.
I amt trying to get Principal, Interest, Principal YTD, Interest YTD from a transaction table to get them all on one line, but I can't seem to get it. I have a script here that can run without modification to see what I have here. The very last query is
incorrect, as it puts each value on a separate line, but it demonstrates what I am getting so far. What I want is one account number with 4 columns, as above mentioned. Keep in mind, in this illustration, YTD is last year and forward:
CREATE TABLE #a
PMT_ID INT IDENTITY(1,1),ACCT_NO INT, PMT_TYPE CHAR(1), PMT_AMT MONEY, PMT_DATE DATE)
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 450, '2012-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 100, '2012-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 450, '2012-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 100, '2012-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 450, '2012-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 100, '2012-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 351, '2012-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 102, '2012-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 352, '2012-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 102, '2012-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 353, '2012-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 102, '2012-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 850, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 200, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 880, '2013-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 201, '2013-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 855, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 203, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 451, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 99, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 451, '2013-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 99, '2013-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 451, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 99, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 352, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 101, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 353, '2013-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 103, '2013-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 354, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 103, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 851, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 199, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 881, '2013-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 201, '2013-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 854, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 205, '2013-12-01')
SELECT PMT_ID, ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE
FROM #a
SELECT ACCT_NO, SUM(PMT_AMT) TOT_PRINCIPAL_PAID
FROM #a
WHERE PMT_TYPE = 'P'
GROUP BY ACCT_NO
SELECT ACCT_NO, SUM(PMT_AMT) TOTAL_INTEREST_PAID
FROM #a
WHERE PMT_TYPE = 'I'
GROUP BY ACCT_NO
SELECT ACCT_NO, SUM(PMT_AMT) TOTAL_PRINCIPAL_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'P'
AND DATEPART(year,[PMT_DATE])=DATEPART(year,DATEADD(year,-1,GETDATE()))
GROUP BY ACCT_NO
SELECT ACCT_NO, SUM(PMT_AMT) TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'I'
AND DATEPART(year,[PMT_DATE])=DATEPART(year,DATEADD(year,-1,GETDATE()))
GROUP BY ACCT_NO
SELECT ACCT_NO
,SUM(PMT_AMT) AS TOTAL_PRINCIPAL_PAID
,NULL AS TOTAL_INTEREST_PAID
,NULL AS TOTAL_PRINCIPAL_PAID_YTD
,NULL AS TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'P'
GROUP BY ACCT_NO
UNION
SELECT ACCT_NO
,NULL AS TOTAL_PRINCIPAL_PAID
,SUM(PMT_AMT) AS TOTAL_INTEREST_PAID
,NULL AS TOTAL_PRINCIPAL_PAID_YTD
,NULL AS TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'I'
GROUP BY ACCT_NO
UNION
SELECT ACCT_NO
,NULL AS TOTAL_PRINCIPAL_PAID
,NULL AS TOTAL_INTEREST_PAID
,SUM(PMT_AMT) AS TOTAL_PRINCIPAL_PAID_YTD
,NULL AS TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'P'
AND DATEPART(year,[PMT_DATE])=DATEPART(year,DATEADD(year,-1,GETDATE()))
GROUP BY ACCT_NO
UNION
SELECT ACCT_NO
,NULL AS TOTAL_PRINCIPAL_PAID
,NULL AS TOTAL_INTEREST_PAID
,NULL AS TOTAL_PRINCIPAL_PAID_YTD
,SUM(PMT_AMT) AS TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'I'
AND DATEPART(year,[PMT_DATE])=DATEPART(year,DATEADD(year,-1,GETDATE()))
GROUP BY ACCT_NO
-- Query to put this all these 4 columns on the same line, ending up with 3 lines.
DROP TABLE #aTry the below query
CREATE TABLE #a
PMT_ID INT IDENTITY(1,1),ACCT_NO INT, PMT_TYPE CHAR(1), PMT_AMT MONEY, PMT_DATE DATE)
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 450, '2012-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 100, '2012-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 450, '2012-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 100, '2012-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 450, '2012-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 100, '2012-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 351, '2012-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 102, '2012-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 352, '2012-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 102, '2012-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 353, '2012-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 102, '2012-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 850, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 200, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 880, '2013-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 201, '2013-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 855, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 203, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 451, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 99, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 451, '2013-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 99, '2013-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'P', 451, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 1, 'I', 99, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 352, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 101, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 353, '2013-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 103, '2013-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'P', 354, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 2, 'I', 103, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 851, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 199, '2013-09-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 881, '2013-10-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 201, '2013-11-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'P', 854, '2013-12-01')
INSERT INTO #a ( ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE ) VALUES ( 3, 'I', 205, '2013-12-01')
SELECT PMT_ID, ACCT_NO, PMT_TYPE, PMT_AMT, PMT_DATE
FROM #a
SELECT ACCT_NO, SUM(PMT_AMT) TOT_PRINCIPAL_PAID
FROM #a
WHERE PMT_TYPE = 'P'
GROUP BY ACCT_NO
SELECT ACCT_NO, SUM(PMT_AMT) TOTAL_INTEREST_PAID
FROM #a
WHERE PMT_TYPE = 'I'
GROUP BY ACCT_NO
SELECT ACCT_NO, SUM(PMT_AMT) TOTAL_PRINCIPAL_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'P'
AND DATEPART(year,[PMT_DATE])=DATEPART(year,DATEADD(year,-1,GETDATE()))
GROUP BY ACCT_NO
SELECT ACCT_NO, SUM(PMT_AMT) TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'I'
AND DATEPART(year,[PMT_DATE])=DATEPART(year,DATEADD(year,-1,GETDATE()))
GROUP BY ACCT_NO
select
T123.ANO,
SUM(TOTAL_PRINCIPAL_PAID) TOTAL_PRINCIPAL_PAID,
SUM(TOTAL_INTEREST_PAID) TOTAL_INTEREST_PAID ,
SUM(TOTAL_PRINCIPAL_PAID_YTD) TOTAL_PRINCIPAL_PAID_YTD,
SUM(TOTAL_INTEREST_PAID_YTD) TOTAL_INTEREST_PAID_YTD
from
SELECT ACCT_NO ANO
,SUM(PMT_AMT) AS TOTAL_PRINCIPAL_PAID
,NULL AS TOTAL_INTEREST_PAID
,NULL AS TOTAL_PRINCIPAL_PAID_YTD
,NULL AS TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'P'
GROUP BY ACCT_NO
UNION
SELECT ACCT_NO
,NULL AS TOTAL_PRINCIPAL_PAID
,SUM(PMT_AMT) AS TOTAL_INTEREST_PAID
,NULL AS TOTAL_PRINCIPAL_PAID_YTD
,NULL AS TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'I'
GROUP BY ACCT_NO
UNION
SELECT ACCT_NO
,NULL AS TOTAL_PRINCIPAL_PAID
,NULL AS TOTAL_INTEREST_PAID
,SUM(PMT_AMT) AS TOTAL_PRINCIPAL_PAID_YTD
,NULL AS TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'P'
AND DATEPART(year,[PMT_DATE])=DATEPART(year,DATEADD(year,-1,GETDATE()))
GROUP BY ACCT_NO
UNION
SELECT ACCT_NO
,NULL AS TOTAL_PRINCIPAL_PAID
,NULL AS TOTAL_INTEREST_PAID
,NULL AS TOTAL_PRINCIPAL_PAID_YTD
,SUM(PMT_AMT) AS TOTAL_INTEREST_PAID_YTD
FROM #a
WHERE PMT_TYPE = 'I'
AND DATEPART(year,[PMT_DATE])=DATEPART(year,DATEADD(year,-1,GETDATE()))
GROUP BY ACCT_NO)T123
Group by T123.ANO
DROP TABLE #a -
When copying some cd's into itunes folder on my computer, some of the songs are copied as separate albums. Please could someone advise how I bring the songs together as one album?
Hello - thx for reply.
However, the Steve Maguire article is from 2010. Has Apple a simple solution now eg some way of dragging individual songs to one album cover? I'm not very I.T. literate -
How to change service for all members
Hello,
We setup our cluster with member1 and member2 as follows.
backup-count = 1 on cluster configuration.
service-name = CACHE-TEST-A, which is stored in Member1
the backup of CACHE-TEST-A is stored in Member2
Now we change the service name CACHE-TEST-A to CACHE-TEST-B.
The question under consideration is how to change CACHE-TEST-A to
CACHE-TEST-B in both members.
Test steps:
1 Turn off the service, execute the following code:
CacheFactory.getCluster (). Shutdown ();
CacheFactory.getCluster (). Stop ();
2 Modify the configuration file, the CACHE-TEST-A modified CACHE-TEST-B
3 Restart the service, execute the following code:
DefaultCacheServer cacheServer = new DefaultCacheServer (new DefaultConfigurableCacheFactory ());
cacheServer.start ();
Result:
Service started, but the configuration file is not loaded,
it seems that the system is still configured with CACHE-TEST-A.We are going to achieve as below.
Requirements:
In the existing cluster nodes without adding a new premise, deploy new business class package (based on CacheStore the jar), also updating some of the Cache service scheme of the configuration.
Solution:
We use the above coding part (using a custom Jmx and DefaultCacheServer to stop and start nodes) to achieve the requirement, but do not know whether any other better solution for this.
Maybe you are looking for
-
Invoice before Goods Receipt in Intercompany
Hi all! We are setting up the Intercompany Purchasing between B1 and R/3 with local stock. In this scenario, a delivery sent from R/3 creates a draft goods receipt in B1. When the goods arrives you must manually open the draft goods receipt and add i
-
How to print logo in standard report
Hi, How to print a logo in sap ordinary report Thanks, Sreedhar
-
Problem with iPhoto recognizing iPhone when plugged in.
I have had my iPhone for a while and at first when i plugged it in iPhoto would pop up and give me the option to sync photos but now when I actually need it, it doesn't show up.
-
I have a Problem with my new AIRLAP 1242 to connect with WLC 4400 after debug in my airlap it shows : Reset done! ethernet link up, 100 mbps, full-duplex Ethernet port 0 initialized: link is up Loading "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.12
-
We are having an issue with CS3. When we export a page with a spot color ad, the white will either overprint the color beneath or even convert to the spot color. We didn't have this issue with CS2.