Troubleshoot Cisco Airlap 1242 with WLC 4400 Series LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response
I have a Problem with my new AIRLAP 1242 to connect with WLC 4400
after debug in my airlap it shows :
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8"...######################################################################################################################################################################################################################################
File "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 19-Mar-07 01:42 by hqluong
Image text-base: 0x00003000, data-base: 0x004051E0
Initializing flashfs...
flashfs[1]: 9 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 5062144
flashfs[1]: Bytes available: 10936832
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1242AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCW1411U0FZ
PowerPCElvis CPU at 266Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 68:EF:BD:5F:9A:18
Part Number : 73-10256-07
PCA Assembly Number : 800-26918-06
PCA Revision Number : A0
PCB Serial Number : FOC14093XU3
Top Assembly Part Number : 800-29152-03
Top Assembly Serial Number : FCW1411U0FZ
Top Revision Number : A0
Product/Model Number : AIR-LAP1242AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:05.608: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:06.858: %DOT11-2-VERSION_INVALID: Interface Dot11Radio0, unable to find required radio version 581.18
*Mar 1 00:00:06.858: Interface Dot11Radio0, Accepting as a test version of radio firmware
*Mar 1 00:00:06.878: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:07.234: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:08.212: %DOT11-2-VERSION_INVALID: Interface Dot11Radio1, unable to find required radio version 581.18
*Mar 1 00:00:08.212: Interface Dot11Radio1, Accepting as a test version of radio firmware
*Mar 1 00:00:08.232: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.278: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:09.326: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 19-Mar-07 01:42 by hqluong
*Mar 1 00:00:09.332: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Mar 1 00:00:09.388: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 32 seconds
*Mar 1 00:00:10.271: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:11.271: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:28.331: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:28.361: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2462 selected
*Mar 1 00:00:28.362: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:00:28.363: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:28.369: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5260 selected
*Mar 1 00:00:28.372: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:28.398: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:28.399: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:28.465: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:29.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:29.465: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Translating "CISCO-LWAPP-CONTROLLER.ekahospital.com"...domain server (202.134.0.155)
*Mar 1 00:00:38.351: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.31.xxx.xxx, mask 255.255.255.0, hostname AP68ef.bd5f.9a18
*Mar 1 00:00:38.820: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2417 selected
*Mar 1 00:00:38.827: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5200 selected (203.130.196.5)
*Mar 1 00:00:49.835: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2422 selected
*Mar 1 00:00:49.842: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5220 selected
*Mar 1 00:00:49.851: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Mar 1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Sep 18 07:02:25.504: %LWAPP-5-CHANGED: LWAPP changed state to CFG
*Sep 18 07:02:29.288: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER.MYDOMAIN.com
*Sep 18 07:02:30.504: LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response
*Sep 18 07:02:30.551: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.
*Sep 18 07:02:30.551: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
flashfs[0]: 9 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 5062144
flashfs[0]: Bytes available: 10936832
flashfs[0]: flashfs fsck took 26 seconds.
Base ethernet MAC Address: 68:ef:bd:5f:9a:18
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
and after that i check in my WLC that shows
AP with Base Radio MAC xx:xx:xx:xx:xx:xx (APxxxx.xxxx.xxxx) is unable to associate.
The reulatory domain configured on it '-e' does not match the controller's country
code: USA
i found that the problem about the region.
question :
1. is it possible to change the region in AIRLAP 1242 or in WLC?
2. if possible how to change it?
INFO :
my first AIRLAP Product/Model Number : AIR-LAP1242AG-A-K9 and my new AIRLAP Product/Model Number : AIR-LAP1242AG-E-K9
WLC GUI >> Wireless >> Country >> Select the country.
Regards
Surendra
Similar Messages
-
I purchased a 10 episode tv series I paid for it, but I only got half the series, where is the rest?
Really?? No one knows??
This is an Apple support forum is it not?
If anyone can at least point me in the right direction that would be great!! -
WLC 4400 series OID for Current Clients
Can someone advise what is the OID for the number of current clients for the WLC 4400 series appliance.
Thanks.Based on the results of your walk, I would say it's reports all of the instances on that particular controller...and I say this because only one instance is reported. I would think that if you have multiple WLANS on that WLC, you would get multiple instances reported back, so, (maybe, like you) I'm confused by the description in the MIB object where it states:
"No of Mobile Stations currently associated with the WLAN."
which to me looks like "the WLAN" is used in the singular.
At this point, I think the best thing to do would be to open a TAC case with all of this info, and we can get with our developers for confirmation.
Hope this has been somewhat helpful, and please rate these posts.
Thanks,
-Joe -
IDS feature on WLC 4400 series
Hi Everyone,
I'd like to ask about the IDS feature on WLC 4400 series.
What will the WLC do if it detects an attack specified in the Standard IDS signature ? Will the WLC shutdown the client or just report it ?
Thank youThe intrusion-detection-system (IDS) signature engine on controllers and on the Cisco WCS automatically eliminates duplicate alerts for rogue access points, rogue clients, and IDS signatures that previously occurred when two or more access points detected the same attacker. Now instead of one IDS alert from each detecting access point, a single alert is generated for the attack.
Intrusion detection, location, and containment preserve the integrity of wireless networks and sensitive corporate information. When an associated client sends malicious traffic, a Cisco wired IDS device detects the attack and sends shun requests to Cisco Wireless LAN Controllers, which then disassociate the client device. -
Ap's Registration Fails With "did not recieve config response"
Greetings, we have been running a Cisco 2106 controller for awhile now, following a recent reboot two out of the four AP's failed to re-register with the following messages.
Translating "CISCO-LWAPP-CONTROLLER.****************.local"...domain server (172.29.255.25) [OK]
%LWAPP-3-CLIENTEVENTLOG: Did not get vendor specific options from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
%SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
%LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER..****************.local
%LWAPP-3-CLIENTEVENTLOG: Controller address 172.29.255.5 obtained through DNS
%LWAPP-5-CHANGED: LWAPP changed state to JOINEncoding the APType as 0
Encoding the RSSI threshhold as 0
Encoding the APType as 0
Encoding the RSSI threshhold as 0
%LWAPP-5-CHANGED: LWAPP changed state to CFG
Writing out the event log to nvram...
%LWAPP-3-CLIENTERRORLOG: Config Request Timer: did not recieve config response (controller - it-wlc-2106)
%SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.
%LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
flashfs[0]: 11 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 7049728
flashfs[0]: Bytes available: 8949248
flashfs[0]: flashfs fsck took 30 seconds.
Base ethernet MAC Address: 00:1e:7a:be:63:60
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
The AP manager interface on the controller is 172.29.255.6 and the management interface is on 172.29.255.5, could anyone shed any light on what may be the problem, i have tried to hard reset the AP's with no effect.
RegardsHi, I found a post from another person regarding the TFTP recovery on an 1131AG. I would try that and also make sure you have the CISCO-LWAPP-CONTROLLER static DNS entry set to the management (login) ip address of your WLC...
"Posted by: jaichauh - Network Engineer, CISCO SYSTEMS - Oct 1, 2008, 1:06pm PST
Yes,
You need to downlaod an IOS autonomous image and then upgrade it by using the following steps:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30, as AP gets an IP of 10.0.0.1 after reset by default.
Step 2 Make sure that the PC contains the access point image file (such as c1130-k9w7-tar.124-3g.JA1.tar for an 1130 series access point) in the TFTP server folder (Root folder) and that the TFTP server is activated.
Step 3 Rename the access point image file in the TFTP server folder to c1130-k9w7-tar.default.
Step 5 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 6 Disconnect power from the access point.
Step 7 Press and hold MODE while you reconnect power to the access point.
Step 8 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 9 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 10 After the access point reboots, reconfigure it using the GUI or the CLI.
HTH
-Jai" -
cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?
Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you. -
Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them either failing or not sending at all. Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?
Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced. -
Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
MaggySimpson wrote:
Hi! I sold my Iphone on ebay.
Follow the instructions to remove a device you no longer have.
From here > http://support.apple.com/kb/PH13695?viewlocale=en_US -
As I can sometimes do, I did not read the directions before delving into LR. Now I find my self with image history in LR on 2 or 3 of my HD's. I would like to now consolidate it on one HD but fear in doing so I will lose the images I have created within LR. Is there a tutorio or some other way to get me back on track with this application?
Your image history (if I understand you properly) is stored in your catalog file, and nowhere else, and so it is only on a single drive.
Do you mean you have edited photos on multiple drives? This isn't a problem for Lightroom at all, the software doesn't care, and you can leave things just the way they are. But if it bothers you for some reason, you can move the photos to a single drive if you want. In Lightroom select the desired photos or folders (it's easier to do this using Folders) and drag them to the desired drive.
Alternative if you will be moving lots of folders: Adobe Lightroom - Find moved or missing files and folders -
how do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.
iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.
-
I applied a template to a page with SWFs and now that page does not play the SWFs. Why?
I applied a template to a page with SWFs and now that page does not play the SWFs (just a blank area where the SWF should be). When I detach the template it will play the flash file. This site will eventually be updated via Adobe Contribute. And I just discovered that when applying a template to a page that uses HTML datasets (Master/Detail),it no longer reads the Master/detail regions and displays a blank. Any thoughts?
[Moved to Dreamweaver forum by moderator]Firstly, you shouldn't really 'apply' a template to a page, you should create a child page by going to FILE>NEW>Page from Template. Too many things can happen when applying a template the way you are doing it. eg:; editable and non-editable regions not matching up and being asked where to place these regions and in all likelihood, you end up with 2 or more of the same region.
When a swf file is inserted into a page, a corresponding Scripts folder is written automatically is stored in the root of the site - it is also linked to in the head of the document. What I believe is happening is that when you apply a template to the page, the Template has no idea that there is a swf file on the page and is not aware of the correct link to the Scripts folder. If you do a test and add the swf file to the template page itself, I bet that the links to the swf and the scripts folder are correct - because DW knows the correct path to the script file. Hence the reason the page probably works when you detach it from a template. -
I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
Thanks so much!To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
For an admin password:
Forgot Your Account Password
For Snow Leopard and earlier
Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
/sbin/fsck -yf
If you do not receive a "Filesystem OK" message then repeat this command until
you do. If after seven tries you still do not receive a "Filesystem OK" message,
then the system is corrupted and needs to be reinstalled.
mount -uw /
cd /private/var/db/netinfo
mv local.nidb local.old
rm ../.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
1. Type fsck -fy
2. Type mount -uw /
3. Type passwd <username>
I have never tried this method myself. -
Problem with ghostscript ['Distiller' did not produce the output file ]
Hi,
We are trying to convert the checked in files to pdf using ghostscript.
The Steps i have followed in installing the Distiller
First I have installed gs8.64 and configure distiller
Refinery server--> Conversion settings --> Third-party Application Settings --> Distiller Engine --> options -->
Use GhostScript and provided the path to install dierctory as C:/Program Files/gs/gs8.64/
Installed Printer as per the pdf
Conversion Settings --> Primary web redention --> convert to pdf using third party applications
Server details:
CS: 10gr3
ghost script 8.64
Plz find the below logs details
Error Log...
Copying c:/ucm/server2/vault/~convert/idc/2/2.txt to c:/ucm/server2/vault/~convert/idc/2/temp.ps
Waiting for exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps
Obtained exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps
Waiting on Distiller
Check for file c:/ucm/server2/vault/~convert/idc/2/temp.pdf failed
'Distiller' did not produce the output file 'c:/ucm/server2/vault/~convert/idc/2/temp.pdf'.
Exception type is 'java.lang.Throwable'. Details
An error has occurred. The stack trace below shows more information.
!$Copying c:/ucm/server2/vault/~convert/idc/2/2.txt to c:/ucm/server2/vault/~convert/idc/2/temp.ps <br>Waiting for exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps <br>Obtained exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps <br>Waiting on Distiller <br>Check for file c:/ucm/server2/vault/~convert/idc/2/temp.pdf failed <br>'Distiller' did not produce the output file 'c:/ucm/server2/vault/~convert/idc/2/temp.pdf'. <br>!syExceptionType,java.lang.Throwable
java.lang.Throwable
at intradoc.common.IdcLogWriter.doMessageAppend(Unknown Source)
at intradoc.common.Log.addMessage(Unknown Source)
at intradoc.common.Log.errorEx2(Unknown Source)
at intradoc.common.Log.errorEx(Unknown Source)
at docrefinery.agent.Logger.logError(Logger.java:138)
at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:140)
at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
at docrefinery.convert.ConversionDriver.processSubConversion(ConversionDriver.java:165)
at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:109)
at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
at docrefinery.queue.PreConvertedRefineryQueueMonitor.handleCurrentQueueItem(PreConvertedRefineryQueueMonitor.java:204)
at docrefinery.queue.PreConvertedRefineryQueueMonitor.monitorRefineryPreConverterQueue(PreConvertedRefineryQueueMonitor.java:125)
at docrefinery.queue.PreConvertedRefineryQueueMonitor$1.run(PreConvertedRefineryQueueMonitor.java:93)
at java.lang.Thread.run(Thread.java:595)
Conversion completed -- Step PostscriptToPDF forced conversion failure by conversion engine because of error: ''Distiller' did not produce the output file 'c:/ucm/server2/vault/~convert/idc/8/temp.pdf'.'. Exception type is 'java.lang.Throwable'.
Please suggest me where i am going wrong...
Thanks in advance,
Prasad V.Hi Srinath,
Thanks for your reply. It worked fine with 8.63 version.
Is there any other way to get it worked with out installing ghostscript.exe as the client doesnt want to instal any exe file on the server as it has broader impact on other instances also, can we acheive the conversion by copying the extracted zip files of ghostscript-8.63.tar.gz .....
We tried with extracted zip files by following the below settings
Refinery server--> Conversion settings --> Third-party Application Settings --> Distiller Engine --> options -->
deselected Use GhostScript and provided the Path to generic PostScript to PDF engine D:\ghostscript\ghostscript\lib\ps2pdf14.bat
Parameters to pass to generic PostScript to PDF engine.
<$postscriptFile$> <$pdfFile$>
Path to generic PDF optimization engine.
D:\ghostscript\ghostscript\lib\pdfopt.bat
Parameters to pass to generic PDF optimization engine.
<$pdfFile$> <$optimizedPdfFile$>
Installed Printer as per the pdf
Conversion Settings --> Primary web redention --> convert to pdf using third party applications
We are getting the below error:
Waiting for exclusive access on c:/temp/idcoutput.ps
Obtained exclusive access on c:/temp/idcoutput.ps
Waiting on Distiller
Error Distilling
Exception type is 'java.lang.Throwable'. [ Details ]
An error has occurred. The stack trace below shows more information.
!$Waiting for exclusive access on c:/temp/idcoutput.ps <br>Obtained exclusive access on c:/temp/idcoutput.ps <br>Waiting on Distiller <br>Error Distilling <br>!syExceptionType,java.lang.Throwable
java.lang.Throwable
at intradoc.common.IdcLogWriter.doMessageAppend(Unknown Source)
at intradoc.common.Log.addMessage(Unknown Source)
at intradoc.common.Log.errorEx2(Unknown Source)
at intradoc.common.Log.errorEx(Unknown Source)
at docrefinery.agent.Logger.logError(Logger.java:138)
at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:140)
at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
at docrefinery.queue.PreConvertedRefineryQueueMonitor.handleCurrentQueueItem(PreConvertedRefineryQueueMonitor.java:204)
at docrefinery.queue.PreConvertedRefineryQueueMonitor.monitorRefineryPreConverterQueue(PreConvertedRefineryQueueMonitor.java:125)
at docrefinery.queue.PreConvertedRefineryQueueMonitor$1.run(PreConvertedRefineryQueueMonitor.java:93)
at java.lang.Thread.run(Thread.java:595)
Conversion completed -- Step PostscriptToPDF forced conversion failure by conversion engine because of error: 'Error Distilling'. Exception type is 'java.lang.Throwable'.
Plz let us know if it is possible to convert the docs to pdf with out installing the ghostscript.exe file on server.
Thanks in advance,
Prasad V. -
no icons on google toolbar. I just get a blank toolbar with nothing on it. unable to modify/reset. reinstall did not volve the issue.
Cannot click on gmail icon, google maps icon, ect... there is just a blank bar and you can do nothing.Do you have the latest version of the Google Toolbar?
'''7.1.20110512W''' is the latest, as far as I know.
Maybe you are looking for
-
I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .
-
Adobe Media Encoder CS6 crashes when quit
OS X 10.7.4 Multiple hardware types Adobe Media Encoder CS6 as installed from Adobe Production Premium CS6. NOTE: CS6 was installed under a different user than the new user that is having AME crash. Issue: Open AME. Encode a file or do not encode
-
Where is the SE Aino Support located now?
Hi Just out of curiosity, I was wondering where the Sony Ericsson Aino Forums are located now, I understand that the actual SE Aino Section was deleted but where would I post for assistance if I do encounter a problem on my aino? Also, a suggestion,
-
Using comma (,) as a decimal separator
I know this isn't the right place to ask, but I cant get excel to use comma as a decimal separator. All is set up right in system preferences and I still cant get it to work in excel. So Im asking if any one know how to make the comma to be used for
-
How to print a Movie clip inside uiLoader?
Hi, I;m making a flash application in AS3, and I've got a little problem. Which is here... Here is my code.... /* Print Button Function Here.....*/ print_btn.addEventListener(MouseEvent.CLICK,printPage); function printPage(evt:MouseEvent) { var p