How to change datasource type 3.x or new after replication?
Hello,
after the replication of a datasource i got a popup, if i want an old 3.X datasource or a new datasource. I clicked new, but i need an old 3.x datasource. Now i don't have a chance the change this.Where can i do it?
I deleted the datasource in sourcesystem, but after new replication i don't get the popup to choose the datasource type.
The problem is, i can't change the technical name of the datasource in sourcesystem because of the naming convention.
Thanks in advance.
Regards.
Hi Bill,
it's a generic datasource i created.The problem is that i create a 3.x Infosource too and i want use my generic datasource. But after replication i choose the false type (new datasource and not 3.x datasource) and now i can't assign my datasource to my 3.x infosource.I see the datasource in the sourcesystem-tree but not in the infosource-datasource-assigning-Popup.
How can i change the type of datasource from new datasource to 3.x datasource in BI 7.0???
Similar Messages
-
How to change data type of attribute in caf
hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel -
Where is "save as" or how to change file type in Preview in Lion?
Where is "save as" or how to change file type in Preview in Lion? I used to use Preview to change quickly change a lot of PNGs to either JPEGs or PDFs but with the introduction of versions auto save etc there no "save as" in the File menu. Any suggestions how to get this functionality back or how to get around it within OS X (no Photoshop etc)?
Just wasted 15 minutes looking for that. What's wrong with Save As?
-
How to change datasource name based on the partition in configplan
Hi
Can any one please give me some solutions regarding how to change datasource name based on the partition in
configplan.
can't we do this in configuration plan?If you want to change template based on parameter. you have to use below syntax
v_layout boolean
V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
,template_code => 'HUBAPAPN' -- template name
,template_language => 'en'
,template_territory => '00'
,output_format => 'PDF');
Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
Thanks
Kamalakar -
How to change light type?
Does anyone know how to change light type?
What happens is that I have a button that I would want to create a Point light, but it just create a spot light.
Does anyone know how to change it to create a point light?
My code is:
//Add a Point Light to active Comp
addLightCtrl.onClick = function(){
var pointLight = proj.layers.addLight("Light", [960, 540]);See the LightLayer object's lightType attribute. Page 100 of the AE CS6 scripting guide.
pointLight = activeItem.layers.addLight("Light", [960, 540]);
pointLight.lightType = LightType.POINT; -
How to change latency type to fast?
How to change latency type to fast?
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
5 days, 03:08:00
Downstream:
16,403 Kbps
Upstream:
948 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
3.1 dB / 4.7 dB
Line attenuation (Down/Up):
30.5 dB / 16.2 dB
Output power (Down/Up):
20.9 dBm / 12.2 dBm
FEC Events (Down/Up):
313987846 / 3701
CRC Events (Down/Up):
2155 / 18271
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
49173 / 14016
Error Seconds (Local/Remote):
0 / 17361 -
How to change nat type 3 to nat type 2 for Plastation 4?
how to change nat type 3 to nat type 2 for adaptation 4? i am havng a complicated time with this im'm just trying to play online and been at it fotr 3 days i have tried about everuyhing n portforwarding.com i have a Cisco Linksys E1000
Hi ceasar14. I actually found some steps (from a source) that worked for me. I'm not sure if it will work for you. Here are the steps:
1. Get the MAC address of your PS3. To find your MAC address simply go to
Settings > System Settings > System Information
2. Assign a static IP address on your PS3.
3. Access your router's user interface to open a few ports.
4. Under Applications and Gaming > Port Range Forwarding, open the following ports:
TCP: 80, 443, 5223
UDP: 3478, 3479, 3658
5. Once this is done, powercycle your PS3 and the router.
6. Run a connection test and check if it is now on NAT2.
Good luck. -
HOW TO CHANGE ACCOUNT TYPE FROM IMAP TO POP
HOW TO CHANGE ACCOUNT TYPE IN YOUR EMAIL FROM IMAP TO POP
You can't. You need to create a new account in Mail.
Note, when setting up a new account (after clicking the '+' in the Accounts proeference), enter an invalid email address or option click the Continue button to be given the choice of account type (POP or IMAP). -
I cannot find how to change the default font in the new Pages. It does not appear in the Help area when I search for it. I am never sing Helvetica for my standard documents and cannot seem to change it. What am I missing? And why does Pages help not have an easy answer?
danYou open a blank template and change the font to you liking. Remember to also get all the styles changed with new font. Then Save As Template. Now you have a template with the font you like.
-
How to change condition type data on header of a sales order
Hi Guys,
I have a requirement, where i want to change the value of particular condition type at header lever of sales order.
How to do it.If i am not wrong , this can be achived by CRM ORDER MAINATAIN .But how to do it i dont know.
So please help me for this requirement
Regards
PGHi PG,
Can you please let me know if you were able to do this. I have a similar requirement where in I need to change the value of a condition type.
I am new to CRM , so it will be great if you can please explain me the steps.
Thanks in advance.
Regards,
Vivek -
How to change material type and industrial sector of the exsisting material
Hi,
There is an issue where user wants to change material type and industrial sector of the exsisting material .Is it posible to do so??
IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector can be created.
Points will be definitely rewarded.
Thanks
RohitHi Rohit,
You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
Remember the new material type should have same attributes same as old material type.
OLD Material New Material
1) Standard Price 1) Standard Price
2) Manufacture part 2) Manufacture part
profile actvated profile actvated
3) Quantity & Value 3) Quantity & Value
Updation in all areas Updation in all areas
4) should have same GL 4) Should have same GL acs
acs
It is not possible to change Industry sector once created.
If you want to delete the Material, you can flag it in MM06 trxn code.
Reg,
Ashok
Dont forget to Assign points if useful. -
How to change set type attribute of a product
Hi ;
I created additional fields for products by using "COMM_ATTRSET". It created a table and functions but I dont know how to change this additional attributes.I cant use these attribute set functions because i dont know fragment_id yet. I think there must be a function encapsulates them.
Is there any BAPI to change set type attributes?
PS: In forums , I found an FM "COM_PRODUCT_MAINTAIN_MULT_API" but I think it hasnt been used anymore in CRM7.0
ThanksThanks for your reply ;
but FM 'COM_PRODUCT_UI_MAINTAIN' doesnt have any generic import parameters to send my data to it in form of newly created attribute set type table "ZPRODUCT".
I want to set some fields of ZPRODUCT and i need to send them in this structure, this table has column FRG_ID , if you set an additional parameter for the first time , it generates new GUID..I think 'COM_PRODUCT_UI_MAINTAIN' generates this GUID but i dont know how to use it.
Can you give an example about using this FM? -
Error value = 73, How to change the type of password?
I want to use the famous wiki integrated in leopard, so I had to configure open directory and DNS.
Well my problem come from that I can't configure open Directory, just after creating a new admin, I have no possiblity to change the type of password, there is just the type shadow, and I know that we had to choose open directory's type.
Obviously, I'm authenticated in the workgroup manager
Which services I had to turn on to use open directory's type?
Or which mac I have to hit.
THXHi
So I had to configure open directory and DNS
What did you do or not do exactly?
My problem come from that I can't configure open Directory
You won't be able to configure Open Directory to allow different password types unless you either bind your Server to an existing KDC or make your Server the KDC. For the Server to be a KDC (Kerberos Distribution Center) it has to be an Open Directory Master. Successful promotion to an Open Directory Master Role absolutely depends on a correctly configured and running DNS Service - either on the server itself or on another server on the same network.
There are plenty of posts in these forums outlining how to configure your Server in terms of DNS as well as how to promote to Open Directory Master. Apple themselves make available Admin Manuals that should assist:
http://images.apple.com/server/macosx/docs/OpenDirectory_Adminv10.5.pdf
http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.5.pdf
Failing this these forums (as already mentioned) as well as:
http://www.afp548.com
Hope this helps, Tony -
How to change data type of input parameter
Hi
In my procedure i declared the data type of "Value Date" Input parameter as Date where as in CR it is showing data type as "Date Time". Can any one please specify how to change to Date.
While prompting for input parameter in description it is showing message as
Please enter Date time in format"yyy-mm-dd hh:mm:ss" . To change the content selected "format field" option. But is there any way to change input parameter data type.
Please suggest how to change.
Thanks SruthiHi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel -
How to change your type of ipod in itunes
How can you change your type of ipod in itunes. We purchased a new Ipod touch and the computer/itunes will not reconize it.
Try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Make sure you have iTunes version 10.5
Maybe you are looking for
-
When I select my template to use in pages, the images and fill in text does not show up at all - just opaque images. Please help! Thank you!
-
I am converting a form from Word to PDF. The form includes several tables and the tables are converting with weird lines where the corners meet. I've tried everything. I've even retyped a portion of the form and tried importing it but it still had th
-
Dyanamic Configuration at receiver file adapter determine target directory
Hi Experts, I have a requirement to determine the target directory during runtime. From the source side one particular field determine the Target directory where you need to place file ECC - PI - File adapter - this is the scenario In target side 3 d
-
How to reuse a response from a server in the next request?
Hello all, I am invoking the doGet method to get authenticated by the clickatell's server... the server responds with a "Ok: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" (not exact values) message in a fresh html page. This is the status code and its session_i
-
LOTUS NOTES ISSUE!!! GRRRRRRRR!
I am soooooo frustrated. I have tried everything! Create a custom submit button, use the standard email button, but NOTHING WORKS!!!!! I have adobe pro 8 and lotus note v 6.1. My problem is the email shows in the to line twice not allowing the email