How to change domain name from "LocalHost" to ipaddress in Jdeveloper?

Hi
When i run any application from JDeveloper, the page opening with the URL keeping "*LocalHost*" as a domain name,
eg: http://*localhost*:7101/Testing/faces/index.jsf
How can i change the domain name from "localHost" to my system's ipaddress. So that whenever i execute the page, the page should open with the ipaddress and not with "localhost", like http://*10.34.65.175*:7101/Testing/faces/index.jsf
Regards
Raj

Thank you Timo.
I changed domain name from "localhost" to ipaddress as you said, after that the server stopped working. Unable to run any application.
Then I changed it back to "localhost" and its working fine.
I am doing it for 2 reasons,
1) With localhost as domain name, I am unable to open ADF mobile browser application in Android emulator.
2) Unable to do remote debugging. Hope this could be the reason.
Regards
Raj

Similar Messages

Newbie question - Changing domain name from .local

Hi, I'm trying to change my domain name from dns.local to dns.domain.edu. Can someone help me with this. The server was already set up and some places it has:
dns.local and other places is has dns.domain.edu. when i type in dns.domain.edu into a browser it works. when i type in dns.local i get an error.

Leave the .local alone. That is your Bonjour access name.
Bonjour is also known as ZeroConf in the Unix world, and is how your Mac discovers other Macs, Mac file servers, and Mac print servers on your local network (also know as a subnet).
You can add search domains via
System Preferences -> Network -> Advanced -> DNS -> Search Domains -> [+]
A search domain is where you can enter 'fred' and the name lookup will look for fred.local, fred.domain.edu assuming both .local and .domain.edu are provied as search domains.
As to other people finding your via dns.domain.edu, that is up to the domain.edu name servers, and their administrators. Your Mac does not establish that, unless they have a dynamic DNS updating service.
To have a DNS name in a domain, your DNS name must be registered with the domain server that owns that domain name. That is not automatic.
In this case if you have not already been assigned dns.domain.edu by the domain name and fixed IP address by the owners of domain.edu, then you cannot just take the name dns.domain.edu. If you have been assigned the name dns.domain.edu and a fixed IP address, then you would set that up in System Preferences -> Network -> Advanced -> TCP/IP
At best, if domain.edu allows the DHCP servers on campus to both assign an IP address and also create a dynamic DNS name in domain.edu, then you might get a name like
college-name-192-168-27-232-subnet-12-dorm-name.domain.edu
A very creative and memorable name
If you cannot get the domain.edu administrators to give you dns.domain.edu as an addressable name, you can go ahead and get a dynamic DNS name from a service such as No-IP.com or DynDNS.org (free ones are available), and just run one of their dynamic DNS updating utilities on your Mac so that when your DHCP IP address changes, your dynamic DNS name is updated with the new IP address as well.
A dynamic DNS name service such as the 2 I just mentioned, will give you a fixed name such as fred.dynamicDNSnameService.net that will not change, and when you run an updating utility on your Mac, the dynamic DNS service will keep the fred.dynamicDNSnameService.net updated with the every changing DHCP assigned IP address.

How to change domain name on Windows 2003 running Exchange 2007

Hi all,
I have a windows 2003 server running Exchange 2007. I am wanting to rename the domain, however when I search the web for the process to perform a rename of the domain I see "The domain rename operation is not supported in Microsoft Exchange Server 2007".
How can a domain name be changed? http://technet.microsoft.com/en-us/library/cc781575%28v=ws.10%29.aspx
The server runs active directory, dns, dhcp, and Exchange 2007.
This change is being inspired by the change with SSL certs where internal addresses like .local will no longer be supported in the third party certificate registrars. Recently we renewed our cert and did not include the .local URL. Now the internal
systems are getting warnings about the cert. I tried generating an internal self signed cert but it seems only one cert can be valid with exchange 2007 running on windows 2003. Thus the internal cert replaced the external cert and allowed
the internal systems to run without complaining about the cert but the external access was causing warnings. I reversed back to the third party cert. This cert has company.com and mail.company.com and autodiscovery. I believe if I rename
the server to server2.company.com the autodiscovery will allow the server2 to be mapped to company.com and the cert will be valid for internal clients.
Do I have this correct? Are there errors with what I have found so far?
Any suggestions about how to solve this issue short of getting a new server? How can I rename the domain?

Hi,
As you mentioned, the domain rename is not supported in Microsoft Exchange Server 2007.
About your question with certificate, we can change URLs to xxx.domain.com. More details about this workaround, please refer to:
https://support.microsoft.com/kb/940726?wa=wsignin1.0
Note: please make sure the same name with certificate.
Additional, Microsoft do not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
Best regards,
Allen Wang

How to change domain name in OD?

Hi, I can't remember what I did to my installation of Server 10.5.6, but now whenever I promote it to OD Standalone, it automatically use domain name A.com. For example, oc=a,oc=a,...
I want to change the domain name to B, and make OD to use the new name B.com.
How do I do it?

I'll second that it's probably a DNS issue, although it may also have to do with the server's configured hostname (which was entered when the server was first set up). Basically, the requirement is that a DNS lookup on the hostname should return the server's primary IP address, and a reverse DNS lookup on the primary IP address should return the server's configured hostname. If you want the server to be set up as B.com, you need to:
a) make sure its configured hostname is "B.com" (you can check it with the "hostname" command). If it isn't, use the "changeip" command to fix it. If your server's IP address was 1.2.3.4, the command would be "sudo changeip - 1.2.3.4 1.2.3.4 A.com B.com".
b) make sure the DNS forward and backward lookups work right. Use the command "host B.com" to check the forward lookup (it should answer with 1.2.3.4, or whatever the server's IP address actually is), then "host 1.2.3.4" to check the reverse lookup (it should return B.com). If any of this doesn't work, find out who's supplying your DNS service and bug them to fix it.

How to change "jabber"name from iMessage on Mac?

I am using only 2 account . One Gmail Account Id and other is Apple ID . I am not using any Jabber ID.
Still My iMessage is showing a Jabber name in left Pane downside.
My description of Apple Id is Gaurav Dubey and for Gmail ID is Google . Still Not able to change the name . Any Help would be appericated
Is There anyway to change that "jabber" name without removing any account

Hi,
In the Messages app you can use your Apple Id with the iMessages account
You can remove the Apple ID from the set up but you cannot actually delete the iMessage account.
The same is true of the Bonjour account (it can be Enabled or not but not deleted)
You can also Add accounts using the Plus icon below the list.
This now list a generic "AIM" line used for Apple IDs that are also Valid AIM Screen Names as well as names registered at AIM.
Then at the bottom is the Yahoo option.
In between are the Jabber options of which Googletalk is one.
So at this point if you have added a Google ID you will list in the Account preferences:-
iMessages
Bonjour
Google
The Google one will have a description field.
This is the account ID by default.
Howerver as it is the only Jabber account the Window Menu is likely to list it as "Jabber" and this is also likely to appear at the bottom left of the Main Messages window and in the text field when chatting to Buddies.
Changing this Description (deleting it) defaults to the ID itself.
Although in some places it automatically shows as Google Talk
In iChat 3 though 5 if you had one AIM account and one Jabber Account logged in and had not changed the default Description then the Window Menu would list "AIM" Buddy List and "Jabber" Buddy List even if it was Google.
As I have had descriptions for some time it appears the app is remembering some of these for accounts where I delete the Description and then log the account in.
I am sure that is a fresh set up with less accounts my Google one would get listed as Jabber in some places.
10:36 pm Wednesday; July 24, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to change server name from RAS?

Wshes to All,
I have designed a report with local server and uploaded into RAS .
Now i have to change the server name in the RAS itself without touching the report.
How to achieve this.
Kindly solve my problem.
Thanks in advance.
Saravanakumar

Hi ,
Since i cannot figure out what to give in the third parameter in replaceConnection() ,
I am using SetTableLocation(oldTable,NewTable);
For that i am setting the following Properties,
        propertyBag.put("Trusted_Connection","False");
        propertyBag.put("Server Type", "JDBC (JNDI)");
        propertyBag.put("Use JDBC","true");
        propertyBag.put("Database DLL","crdb_jdbc.dll");
        //propertyBag.put("JNDIOptionalName",JNDIName);
        propertyBag.put("Connection URL","jdbc:oracle:thin:@xxxxxxxx:xxx");
        propertyBag.put("Database Class Name","oracle.jdbc.driver.OracleDriver");
But still i cannot establish the connection.
Is Connection String also required.
If so how to give the Value for that.
Thanks,
Saravanakumar.

How do I get IE to drop the domain name from authentication responses

All,
I have a number of internal www servers that run various non MS operating systems which are not tied to the windows domain in any way. They are secure www sites and require authentication.
When I connect to one via IE on a domain joined workstation or server (ie 8 & 9) I am unable to authenticate because I can not remove the domain name from the authentication credentials that IE is passing back to the www server. I get an authentication
prompt for user name & password with the domain pre populated.
How the heck to I get IE to NOT pass the domain name as part of the authentication process. I've tried putting .\ in front of the user name but to no avail.
Thanks,
Steve D.

As you can see below, when you first attempt the auth it defaults to you domain user account... in this case win\username.
When you select use another account, you get the following with no means to remove the domain name which causes auth failure as this www server isn't a domain member and doesn't use the domain for auth.
How do I get rid of Domain: .... ???
Thanks,
Steve D.

How to get the domain name from the System

I need to get the domain name from the system in JDK 1.1.8
Any Ideas?

InetAddress.getLocalHost().getHostName() will get you the name of the computer the code is executed on. If that isn't the "domain name" then perhaps you could give more detail about what "domain" you are trying to find the name of.

Pb connecting from client to database after changing domain name

Hi,
I've got 3 databases wthis 3 listeners. all worked well since we change domain name. database server is in DMZ and is reconize witn 2 IP adresses.
I can ping with tnsping but when I run sqlplus user/passwd@ORACLE_SID I've got this message : ERROR:
ORA-12535: TNS : le dÚlai imparti Ó l'opÚration est ÚcoulÚ
on local host this command run well and connect to database.
is there somebody that knows this problem and its solution?
Thank you for your help.
PS: I'm on oracle 9.2.0 and windows200 server and client

I've got this message in listener.log
Démarré avec pid=3028
Ecoute sur : (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Ecoute sur : (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=bam_sgbd.imelios.com)(PORT=1522)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
19-MAR-2004 14:21:33 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2032)) * establish * ADRPRODR * 0
19-MAR-2004 14:34:36 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BAM_SGBD))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=2394)) * establish * ADRPRODR * 0
19-MAR-2004 14:40:53 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2195)) * establish * ADRPRODR * 0
19-MAR-2004 14:44:18 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BerPre))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=2809)) * establish * ADRPRODR * 0
19-MAR-2004 14:57:52 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BAM_SGBD))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=3413)) * establish * ADRPRODR * 0
19-MAR-2004 15:11:47 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2433)) * establish * ADRPRODR * 0
19-MAR-2004 15:55:59 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=IP_ADRESSE)(PORT=2561)) * establish * ADRPRODR * 0
19-MAR-2004 15:56:26 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=IP_ADRESSE)(PORT=2568)) * establish * ADRPRODR * 0
this seems to work pas on client connection doesn't arrive

Change domain name clients and server

Hello,
I want to change the domain name from eg ".vancouver.gov" to ".vancouver.local" on all of our devices in the network. Zcm has been installed with ".vancouver.gov" and the clients also are registered with ".vancouver.gov". When i change the domain name on the workstations and change the corresponding dns entries of the workstations to ".vancouver.gov" i cannot register workstations anymore and wol does not work anymore. Distributing applications to the workstation does work.
Anybody now how to accomplish this change.
We have about 400 workstations and 1 zcm 10.3.3 server.
Thanks.
Ren

I would recommend an SR.
Changing the DNS of Devices should not impact any of that, so long as
the clients can still properly resolve the servers and you are not
destroying the old DNS zone.
This may indicate that the CA/Server CERTs do not have the fullied
qualified DNS name of the server but perhaps just the short name.
Also, I would not recommend attempting to fix any certs right away, but
rather using the "Additional DNS Name" setting on your server, since
changing a Cert could cause lots for work on client PCs.
Later versions of ZCM make changing server certs a little easier but for
10.3.3, I would just use the server setting instead of a change.
But since I suspect you can create an SR as most government accounts
can, it may be simplest to go that route but keep my thoughts avoiding
any cert rebuilds in mind if there is any issue with the names in the
server cert.
On 6/4/2012 11:16 AM, rengelha wrote:
>
> Hello,
>
> I want to change the domain name from eg ".vancouver.gov" to
> ".vancouver.local" on all of our devices in the network. Zcm has been
> installed with ".vancouver.gov" and the clients also are registered with
> ".vancouver.gov". When i change the domain name on the workstations and
> change the corresponding dns entries of the workstations to
> ".vancouver.gov" i cannot register workstations anymore and wol does not
> work anymore. Distributing applications to the workstation does work.
>
> Anybody now how to accomplish this change.
>
> We have about 400 workstations and 1 zcm 10.3.3 server.
>
> Thanks.
>
> Ren�
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Cisco ICM 7.2: change domain name

Hi all,
I have a IPCC system (ICM 7.2) in production with a domain name. Customer want to change the domain name recently. Does anyone have the same issue with me? Can you point me some related document and some risk when I change the domain name in Cisco ICM system? Will the system still work when I do the same.
Regards,
Thanh

Hi Irfan,
I don't want to do this actually but this system now have a Exchange server and Unity 7 and customer have bought a domain name from the provider. It is different from our local domain.
Can you share me about how to change the domain name
1. I just follow the microsoft guide to change the domain name
2. Which component in IPCC system will effect? Are there any down time when I change the domain name?
Thank you,
Thanh

How to change the "name of column" property of an text item in runtime?

How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?

Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero

How to change column "Date" from "Text" to "Date-Time" in Document Library.

How to change column name "Date" from "Single line of Text" to "Date and Time" in Document Library.

Hi,
If you would change column type, you might need to re-create column.
If you would like a text column to display in date format, you could refer to the links below:
http://sharepoint.stackexchange.com/questions/45774/how-to-convert-date-field-in-single-line-of-text-using-calculated-columns
http://yasuanantha.blogspot.com/2008/06/to-convert-text-column-to-date-column.html
Regards,
Rebecca Tu
TechNet Community Support

How to change the name of column in ActionScript?

I possibly know how to change the name of the column in DataGrid using mxml but dont know how to change the name of column in DataGrid using ActionScript.
var newDataGrid:DataGrid=new DataGrid();
newDataGrid.dataProvider=arrayCollection():
It takes the default names from arraycollection but I wanted to give any column names which I want through ActionScript.
Please HELP!

Give your datacolumn and id. Then set the property for that column through the datacolumn id.
DataGridColumn id="nameDC"
Script:
nameDC.headerText = "Name";

Changing domain name

Hello All,
We have oracle Database installed on RED HAT AS 3.1.
Database version is 9.2.0.5.0.
We also have two web servers connected to above database server.
Just before live production, Management asks me to change domain name.
1) My question is âDoes changing domain name effect any thing from Oracle DB perspective"?
2) Do I need to configure any thing from Oracle database?
Regards,
Diana Wales

check global_name view and set it according to new settings
Select * from global_name:
update globale_name set global_name='NEW_NAME' ;
commit;
you should log in as sys

How to change domain name from "LocalHost" to ipaddress in Jdeveloper?

Similar Messages

Maybe you are looking for